Ligand-protected gold/silver superatoms: current status and emerging trends

'Passivated Precursor' Approach to All-Alkynyl-Protected Gold Nanoclusters and Total Structure Determination of Au130

A 'passivated precursor' approach is developed for the efficient synthesis and isolation of all-alkynyl-protected gold nanoclusters. Direct reduction of dpa-passivated precursor Au-dpa (Hdpa=2,2'-dipyridylamine) in one-pot under ambient conditions gives a series of clusters including Au22(C≡CR)18 (R=-C6H4-2-F), Au36(C≡CR)24, Au44(C≡CR)28, Au130(C≡CR)50, and Au144(C≡CR)60. These clusters can be well separated via column chromatography. The overall isolation yield of this series of clusters is 40 % (based on gold), which is much improved in comparison with previous approaches. It is notable that the molecular structure of the giant cluster Au130(C≡CR)50 is revealed, which presents important information for understanding the structure of the mysterious Au130 nanoclusters. Theoretical calculations indicated Au130(C≡CR)50 has a smaller HOMO-LUMO gap than Au130(S-C6H4-4-CH3)50. This facile and reliable synthetic approach will greatly accelerate further studies on all-alkynyl-protected gold nanoclusters.

Assembly of anionic silver nanoclusters with controlled packing structures through site-specific ionic bridges

The assembly of metal nanoclusters (NCs) into crystalline lattice structures is of interest in the development of NC-based functional materials. Here we demonstrate that the assembled structures of tri-anionic tetrahedral symmetric [Ag29(BDT)12]3- (Ag29 NC, BDT: 1,3-benzenedithiol) NCs are controlled into a polyethylene-like zigzag chain and a "poly-ring-fused-cyclohexane"-like honeycomb arrangement through ionic interactions with alkali metal cations such as K+ and Cs+. The site-specific binding of alkali metal ions on the tetrahedrally arranged binding sites of Ag29 NCs successfully connects the adjacent NCs into various packing modes. The number and type of bridges between NCs determine the Ag29 NC packing structures, which are affected by the solvent species, enabling the transformation of packing modes in the single-crystalline state. The photoluminescence (PL) properties of the crystals responded to the packing modes of the NCs in terms of anisotropy and bridge linkage style inducing a varied degree of relaxation of the excited state depending on the relocation mobility of alkali metal ions in the crystals.

Pd8(PDip)6: Cubic, Unsaturated, Zerovalent

Atomically precise nanoclusters hold promise for supramolecular assembly and (opto)electronic- as well as magnetic materials. Herein, this work reports that treating palladium(0) precursors with a triphosphirane affords strongly colored Pd8(PDip)6 that is fully characterized by mass spectrometry, heteronuclear and Cross-Polarization Magic-Angle Spinning (CP-MAS) NMR-, infrared (IR), UV-vis, and X-ray photoelectron (XP) spectroscopies, single-crystal X-Ray diffraction (sc-XRD), mass spectrometry, and cyclovoltammetry (CV). This coordinatively unsaturated 104-electron Pd(0) cluster features a cubic Pd8-core, µ4-capping phosphinidene ligands, and is air-stable. Quantum chemical calculations provide insight to the cluster's electronic structure and suggest 5s/4d orbital mixing as well as minor Pd─P covalency. Trapping experiments reveal that cluster growth proceeds via insertion of Pd(0) into the triphosphirane. The unsaturated cluster senses ethylene and binds isocyanides, which triggers the rearrangement to a tetrahedral structure with a reduced frontier orbital energy gap. These experiments demonstrate facile cluster manipulation and highlight non-destructive cluster rearrangement as is required for supramolecular assembly.

Exploring the impact of various reducing agents on Cu nanocluster synthesis

The synthesis of copper (Cu) nanoclusters (NCs) has experienced significant advancements in recent years. Despite the exploration of metal NCs dating back almost two decades, challenges specific to Cu NC synthesis arise from the variable oxidation states and heightened reactivity of intermediate Cu complexes, distinguishing it from its analogous counterparts. In this study, we present a comprehensive overview of this newly evolving research domain, focusing on the synthetic aspects. We delve into various factors influencing the synthesis of Cu NCs, with specific emphasis on the role of reducing agents. The impact of the reducing agent is particularly pivotal in this synthetic process, ultimately influencing the formation of model M(0)-containing NCs, which are less readily accessible in the context of Cu NCs. We anticipate that this frontier article will pave the way for accelerated research in the field of Cu NCs. By aiding in the selection of specific reaction conditions and reducing agents, we believe that this work will contribute to a faster-paced exploration of Cu NCs, further advancing our understanding and applications in this exciting area of nanomaterial research.

Recent progress in atomically precise silver nanocluster-assembled materials

In the dynamic landscape of nanotechnology, atomically precise silver nanoclusters (Ag NCs) have emerged as a novel and promising category of materials with their fascinating properties and enormous potential. However, recent research endeavors have surged towards stabilizing Ag-based NCs, leading to innovative strategies like connecting cluster nodes with organic linkers to construct hierarchical structures, thus forming Ag-based cluster-assembled materials (CAMs). This approach not only enhances structural stability, but also unveils unprecedented opportunities for CAMs, overcoming the limitations of individual Ag NCs. In this context, this review delves into the captivating realm of atomically precise nitrogen-based ligand bonded Ag(I)-based CAMs, providing insights into synthetic strategies, structure-property relationships, and diverse applications. We navigate the challenges and advancements in integrating Ag(I) cluster nodes, bound by argentophilic interactions, into highly connected periodic frameworks with different dimensionalities using nitrogen-based linkers. Despite the inherent diversity among cluster nodes, Ag(I) CAMs demonstrate promising potential in sensing, catalysis, bio-imaging, and device fabrication, which all are discussed in this review. Therefore, gaining insight into the silver nanocluster assembly process will offer valuable information, which can enlighten the readers on the design and advancement of Ag(I) CAMs for state-of-the-art applications.

Silver Cluster Assembled Materials: A Model-Driven Perspective on Recent Progress, with a Spotlight on Ag12 Cluster Assembly

The exploration of individual nanoclusters is rapidly advancing, despite stability concerns. To address this challenge, the assembly of cluster nodes through linker molecules has been successfully implemented. However, the linking of the cluster nodes itself introduces a multitude of possibilities, especially when additional factors come into play. While this method proves effective in enhancing material stability, the specific reasons behind its success remain elusive. In our laboratory, we have undertaken extensive studies on Ag cluster-assembled materials. So, here our goal is to establish a model system that allows for the discernment of various factors, eliminating unnecessary complexities during the linking approach. So, we hope that the systematic discourse presented in here will contribute significantly to future endeavors, helping to set clear priorities, and provide solutions to concerns that arise when working with a model system.

Tuning the electronic structure of gold cluster-assembled materials by altering organophosphine ligands

Superatomic clusters can be assembled to build bulk matter, where the individual characteristics are preserved. The main benefit of these materials over conventional bulk species is the capability to tailor their features by altering the physicochemical identities of individual clusters. Electronic properties of metal clusters can be modified by a protective shell of ligands that attach to the surface and make the whole nanoparticle soluble in organic or aqueous solvents. In the present work, we demonstrate that properly chosen ligands provide not only steric protection from aggregation but also tune the redox activity of metal clusters. We investigate the role of the ligands in electronic structure tunability and ligand-field splitting. Our first-principles calculations agree with the experiments, showing that phosphine-protected gold materials are small gap semiconductors. The obtained bandgaps strongly depend on the ligand used. Hence, using phosphine and organophosphine ligands should be feasible and promising while designing the novel superatom-based materials since the desired range of the bandgap might be achieved (by the proper choice of the ligand).

N-Heterocyclic Carbene-Stabilized Atomically Precise Metal Nanoclusters

This perspective highlights advances in the preparation and understanding of metal nanoclusters stabilized by organic ligands with a focus on N-heterocyclic carbenes (NHCs). We demonstrate the need for a clear understanding of the relationship between NHC properties and their resulting metal nanocluster structure and properties. We emphasize the importance of balancing nanocluster stability with the introduction of reactive sites for catalytic applications and the importance of a better understanding of how these clusters interact with their environments for effective use in biological applications. The impact of atom-scale simulations, development of atomic interaction potentials suitable for large-scale molecular dynamics simulations, and a deeper understanding of the mechanisms behind synthetic methods and physical properties (e.g., the bright fluorescence displayed by many clusters) are emphasized.

Atomically precise Au and Ag nanoclusters doped with a single atom as model alloy catalysts

Gold and silver nanoclusters (NCs) composed of <200 atoms are novel catalysts because their catalytic properties differ significantly from those of the corresponding bulk surface and can be dramatically tuned by the size (number of atoms). Doping with other metals is a promising approach for improving the catalytic performance of Au and Ag NCs. However, elucidation of the origin of the doping effects and optimization of the catalytic performance are hampered by the technical challenge of controlling the number and location of the dopants. In this regard, atomically precise Au or Ag (Au/Ag) NCs protected by ligands or polymers have recently emerged as an ideal platform because they allow regioselective substitution of single Au/Ag constituent atoms while retaining the size and morphology of the NC. Heterogeneous Au/Ag NC catalysts doped with a single atom can also be prepared by controlled calcination of ligand-protected NCs on solid supports. Comparison of thermal catalysis, electrocatalysis, and photocatalysis between the single-atom-doped and undoped Au/Ag NCs has revealed that the single-atom doping effect can be attributed to an electronic or geometric origin, depending on the dopant element and position. This minireview summarizes the recent progress of the synthesis and catalytic application of single-atom-doped, atomically precise Au/Ag NC catalysts and provides future prospects for the rational development of active and selective metal NC catalysts.

Triplet properties and intersystem crossing mechanism of PtAg28 nanocluster sensitizers achieving low threshold and efficient photon upconversion

Ligand-protected metal nanoclusters have emerged as a promising platform for providing sensitizers for triplet-triplet annihilation upconversion (TTA-UC). Herein, we report [PtAg28(BDT)12]4- (PtAg28; BDT = 1,3-benzenedithiolate) as a sensitizer enabling TTA-UC at low excitation intensities. PtAg28 exhibits a long-lived triplet state (approximately 7 μs) generated with a 100% intersystem crossing (ISC) quantum yield. The mechanism driving this efficient ISC was unveiled with the aid of theoretical calculations. Specifically, the S1-T1 ISC reveals a small spin-orbit coupling (SOC) matrix element, attributed to their similar electron configuration. In contrast, the T2 state, which is energetically close to S1, features a hole distribution derived from the Py superatomic orbital of the icosahedral Pt@Ag12 core. This distribution enables direct SOC based on the orbital angular momentum change from the S1 state with a Pz-derived hole distribution. Consequently, the efficient ISC was rationalized by the S1 → T2 → T1 pathway. The T1 state possesses a metal core-to-surface metal charge transfer character, facilitating triplet energy transfer and conferring superior sensitization ability. Leveraging these characteristics, the combination of PtAg28 sensitizer with a 9,10-diphenylanthracene annihilator/emitter attained an extremely low UC threshold of 0.81 mW cm-2 at 532 nm excitation, along with efficient green-to-blue TTA-UC with an internal quantum yield (ΦUCg) of 12.2% (50% maximum). This results in a pseudo-first-order TTA process with strong UC emission under 1-sun conditions.

A Comprehensive Analysis of Luminescent Crystallized Cu Nanoclusters

Photoluminescence (PL) emission is an intriguing characteristic displayed by atomically precise d10 metal nanoclusters (NCs), renowned for their meticulous atomic arrangements, which have captivated the scientific community. Cu(I) NCs are a focal point in extensive research due to their abundance, cost-effectiveness, and unique luminescent attributes. Despite similar core sizes, their luminescent characteristics vary, influenced by multiple factors. Progress hinges on synthesizing new NCs and modifying existing ones, with postsynthetic alterations impacting emission properties. The rapid advancements in this field pose challenges in discerning essential points for excelling amidst competition with other d10 NCs. This Perspective explores the intricate origins of PL emission in Cu(I) NCs, providing a comprehensive review of their correlated structural architectures. Understanding the mechanistic origin of PL emission in each cluster is crucial for correlating diverse characteristics, contributing to a deeper comprehension from both fundamental and applied scientific perspectives.

Second-order superatoms: Au52-PAP featuring a three-dimensional cluster-of-clusters core

The recent characterization of Au52-PAP cluster can be viewed as a three-dimensional arrangement featuring four Au13 motifs. As a result, a new set of superatomic orbitals are built up from the superatomic shell of each constituent unit, denoted by 1S'21P'62S'21D'102P'61F'6 and, thus, referred to as a second-order superatomic shell structure. This favors the rationalization of larger species toward the formation of cluster-assembled materials of different sizes.

Dissecting the Triplet-State Properties and Intersystem Crossing Mechanism of the Ligand-Protected Au13 Superatom

Icosahedral Au13 nanoclusters are among the most typical superatoms and are of great interest as promising building blocks for nanocluster-assembled materials. Herein, the key parameters involved in the intersystem crossing (ISC) process of [Au13(dppe)5Cl2]3+ (Au13; dppe = 1,2-bis(diphenylphosphino)ethane) were characterized. Quenching experiments using aromatic compounds revealed that the T1 energy of Au13 is 1.63 eV. An integrative interpretation of our experimental results and the relevant literature uncovered important facts concerning the Au13 superatom: the ISC quantum yield is unity due to the ultrafast ISC (∼1012 s-1), the lowest absorption band includes contributions of direct singlet-triplet transitions, and there exists a large S1-T1 gap of 0.73 eV. To explain the efficient ISC, the El-Sayed rule was applied to the superatomic orbitals corresponding to the excited-state hole/electron distributions obtained from theoretical calculations. The strong spin-orbit coupling between the S1 and T2-T4 states offers a reasonable explanation for the ultrafast ISC.

Advances in Cu nanocluster catalyst design: recent progress and promising applications

The quest for cleaner pathways to the production of fuels and chemicals from non-fossil feedstock, efficient transformation of raw materials to value-added chemicals under mild conditions, and control over the activity and selectivity of chemical processes are driving the state-of-the-art approaches to the construction and precise chemical modification of sustainable nanocatalysts. As a burgeoning category of atomically precise noble metal nanoclusters, copper nanoclusters (Cu NCs) benefitting from their exclusive structural architecture, ingenious designability of active sites and high surface-to-volume ratio qualify as potential rationally-designed catalysts. In this Minireview, we present a detailed coverage of the optimal design strategies and controlled synthesis of Cu NC catalysts with a focus on tuning of active sites at the atomic level, the implications of cluster size, shape and structure, the ligands and heteroatom doping on catalytic activity, and reaction scope ranging from chemical catalysis to emerging photocatalysis and electrocatalysis.

Two-Dimensional Silver-Chalcogenolate-Based Cluster-Assembled Material: A p-type Semiconductor

We have synthesized and characterized a new two-dimensional honeycomb architecture resembling a single-layer of atomically precise silver cluster-assembled material (CAM), [Ag12(StBu)6(CF3COO)6(4,4'-azopyridine)3] (Ag12-azo-bpy). The interlayer noncovalent van der Waals interactions within the single-crystals were successfully disrupted, leading to the creation of this unique structure. The optimized Ag12-azo-bpy CAM demonstrates a valence band that is localized on the Ag12 cluster node situated near the Fermi energy level. This localization induces electron injection from the linker to the cluster node, facilitating efficient charge transportation along the plane. Exploiting this single-layer structure as a distinctive platform for p-type channel material, it was employed in a field-effect transistor configuration. Remarkably, the transistor exhibits a high hole mobility of 1.215 cm2 V-1 s-1 and an impressive ON/OFF current ratio of ∼4500 at room-temperature.

Recent developments in the investigation of driving forces for transforming coinage metal nanoclusters

Metal nanoclusters serve as an emerging class of modular nanomaterials. The transformation of metal nanoclusters has been fully reflected in their studies from every aspect, including the structural evolution analysis, physicochemical property regulation, and practical application promotion. In this review, we highlight the driving forces for transforming atomically precise metal nanoclusters and summarize the related transforming principles and fundamentals. Several driving forces for transforming nanoclusters are meticulously reviewed herein: ligand-exchange-induced transformations, metal-exchange-induced transformations, intercluster reactions, photochemical transformations, oxidation/reduction-induced transformations, and other factors (intrinsic instability, pH, temperature, and metal salts) triggering transformations. The exploitation of transforming principles to customize the preparations, structures, physicochemical properties, and practical applications of metal nanoclusters is also disclosed. At the end of this review, we provide our perspectives and highlight the challenges remaining for future research on the transformation of metal nanoclusters. Our intended audience is the broader scientific community interested in metal nanoclusters, and we believe that this review will provide researchers with a comprehensive synthetic toolbox and insights on the research fundamentals needed to realize more cluster-based nanomaterials with customized compositions, structures, and properties.

Rh19-: A high-spin super-octahedron cluster

Probing atomic clusters with magic numbers is of supreme importance but challenging in cluster science. Pronounced stability of a metal cluster often arises from coincident geometric and electronic shell closures. However, transition metal clusters do not simply abide by this constraint. Here, we report the finding of a magic-number cluster Rh19- with prominent inertness in the sufficient gas-collision reactions. Photoelectron spectroscopy experiments and global-minimum structure search have determined the geometry of Rh19- to be a regular Oh‑[Rh@Rh12@Rh6]- with unusual high-spin electronic configuration. The distinct stability of such a strongly magnetic cluster Rh19- consisting of a nonmagnetic element is fully unveiled on the basis of its unique bonding nature and superatomic states. The 1-nanometer-sized Oh-Rh19- cluster corresponds to a fragment of the face-centered cubic lattice of bulk rhodium but with altered magnetism and electronic property. This cluster features exceptional electron-spin state isomers confirmed in photoelectron spectra and suggests potential applications in atomically precise manufacturing involving spintronics and quantum computing.

Hydride Doping Effects on the Structure and Properties of Eight-Electron Rh/Ag Superatoms: The [RhHx@Ag21-x{S2P(OnPr)2}12] (x = 0-2) Series

Three hitherto unknown eight-electron rhodium/silver alloy nanoclusters, [RhAg₂₁{S₂P(OⁿPr)₂}₁₂] (1), [RhHAg₂₀{S₂P(OⁿPr)₂}₁₂] (2), and [RhH₂Ag₁₉{S₂P(OⁿPr)₂}₁₂] (3), have been isolated and fully characterized. Cluster 1 contains a regular Rh@Ag₁₂ icosahedral core, whereas 2 and 3 exhibit distorted RhH@Ag₁₂ and RhH₂@Ag₁₂ icosahedral cores. The single-crystal neutron structure of 2 located the encapsulated hydride at the center of an enlarged RhAg₃ tetrahedron. A similar position was found by neutron diffraction for one of the hydrides in 3, whereas the other hydride is trigonally coordinated to Rh and an elongated Ag-Ag edge. The solid-state structures of 1-3 possess C₁ symmetry due to the asymmetric arrangement of the surrounding capping Ag atoms. Our investigation shows that the insertion of one hydride dopant provokes the elimination of one capping silver atom on the cluster surface, resulting in the general formula [RhH_x@Ag_21-x{S₂P(OⁿPr)₂}₁₂] (x = 0-2), which maintains the same number of cluster electrons as well as neutral charge. Clusters 1-3 exhibit an intense emission band in the NIR region. Contrarily to their PdAg₂₁ and PdHAg₂₀ relatives, the 4d orbitals of the encapsulated heterometal are somewhat involved in the optical processes.

A heteroleptic fused bi-cuboctahedral Cu21S2 cluster

A new dicationic cluster, [Cu₂₁S₂{S₂CNⁿBu₂}₉(C₂Ph)₆]²⁺, where the Cu21S2 kernel consists of two S@Cu₁₂ cuboctahedra sharing a triangular Cu₃ face is reported. Its waist part is bridged by three dithiocarbamate ligands, each in a hexaconnective, hexametallic (μ₃, μ₃) coordination pattern, an unprecedented feature in Cu nanocluster chemistry.

Recent progress in dichalcophosphate coinage metal clusters and superatoms

Atomically precise clusters of group 11 metals (Cu, Ag, and Au) attract considerable attention owing to their remarkable structure and fascinating properties. One of the unique subclasses of these clusters is based on dichalcophosphate ligands of [(RO)₂PE₂]^- type (E = S or Se, and R = alkyl). These ligands successfully stabilise the most diverse Cu, Ag, and Au clusters and superatoms, spanning from simple ones to amazing assemblies featuring unusual structural and bonding patterns. It is noteworthy that such complicated clusters are assembled directly from cheap and simple reagents, metal(I) salts and dichalcophosphate anions. This reaction, when performed in the presence of a hydride or other anion sources, or foreign metal ions, results in hydrido- or anion-templated homo- or heteronuclear structures. In this feature article, we survey the recent advances in this exciting field, highlighting the powerful synthetic capabilities of the system "a metal(I) salt - [(RO)₂PX₂]^- ligands - a templating anion or borohydride" as an inexhaustible platform for the creation of new atomically precise clusters, superatoms, and nanoalloys.

Luminescent [CO2@Ag20(SAdm)10(CF3COO)10(DMA)2] nanocluster: synthetic strategy and its implication towards white light emission

Owing to the quantized size and associated discrete energy levels, atomically precise silver nanoclusters (Ag NCs) hold great potential for designing functional luminescent materials. However, the thermally activated non-radiative transition of Ag(I)-based NCs has faded the opportunities. To acquire the structurally rigid architecture of cluster nodes for constraining such transitions, a new synthetic approach is unveiled here that utilizes a neutral template as a cluster-directing agent to assemble twenty Ag(I) atoms that ensure the maximum number of surface-protecting ligand attachment possibilities in a particular solvent medium. The solvent polarity triggers the precise structural design to circumvent the over-reliance of the templates, which results in the formation of [CO₂@Ag₂₀(SAdm)₁₀(CF₃COO)₁₀(DMA)₂] NC (where SAdm = 1-adamantanethiolate and DMA = N,N-dimethylacetamide) exhibiting an unprecedented room-temperature photoluminescence emission. The high quantum yield of the generated blue emission ensures its candidature as an ideal donor for artificial light-harvesting system design, and it is utilized with the two-step sequential energy transfer process, which finally results in the generation of ideal white light. For implementing perfect white light emission, the required chromophores in the green and red emission regions were chosen based on their effective spectral overlap with the donor components. Due to their favorable energy-level distribution, excited state energy transfers occurred from the NC to β-carotene at the initial step, then from the conjugate of the NC and β-carotene to another chromophore, Nile Blue, at the second step via a sequential Förster resonance energy transfer pathway.

Synchronous Metal Rearrangement on Two-Dimensional Equatorial Surfaces of Au-Cu Alloy Nanoclusters

Understanding the growth of nanoclusters and the relationship between structure-activity depends on the precise arrangement of metals on their surface. In this work, we realized the synchronous rearrangement of metal atoms on the equatorial plane of Au-Cu alloy nanoclusters. Upon adsorption of the phosphine ligand, the Cu atoms on the equatorial plane of the Au₅₂Cu₇₂(SPh)₅₅ nanocluster are irreversibly rearranged. The whole metal rearrangement process can be understood from a synchronous metal rearrangement mechanism initiated by the adsorption of the phosphine ligand. Furthermore, this metal rearrangement can effectively improve the efficiency of A³ coupling reactions without increasing the amount of catalyst.

Effect of total charge on the electronic structure of thiolate-protected X@Ag12 superatoms (X = Ag, Au)

Electronic structures of chemically synthesized silver-based clusters [XAg₁₆(TBBT)₁₂]^3- (X = Ag or Au; TBBT = 4-tert-butylbenzenethiolate) having an icosahedral X@Ag₁₂ superatomic core were studied by gas-phase photoelectron spectroscopy and density functional theory calculations. The electron binding energy of the highest occupied molecular orbital (HOMO) with a 1P superatomic nature was determined to be 0.23 and 0.29 eV for X = Ag or Au, respectively. Resonant tunnelling electron emission through the repulsive Coulomb barrier (RCB) was observed. From the kinetic energy of the tunnelling electrons, it was estimated that the lowest unoccupied molecular orbital (LUMO) was supported at 1.51 and 1.62 eV above the vacuum level by the RCB for X = Ag or Au, respectively. The HOMO of [XAg₁₆(TBBT)₁₂]^3- (X = Ag or Au) was destabilized by 3.74 and 3.71 eV, respectively, compared with those of [XAg₂₄(DMBT)₁₈]^- (DMBT = 2,4-dimethylbenzenethiolate) having the icosahedral X@Ag₁₂ core due to the larger negative charge imparted by the ligand layers.

From Au11 to Au13: Tailored Synthesis of Superatomic Di-NHC/PPh3-Stabilized Molecular Gold Nanoclusters

Herein, we report a new method to synthesize molecular gold nanoclusters (AuNCs) stabilized by phosphine (PR₃) and di-N-heterocyclic carbene (di-NHC) ligands. The interaction of di-NHC gold(I) complexes, with the general formula [(di-NHC)Au₂Cl₂] with well-known [Au₁₁(PPh₃)₈Cl₂]Cl clusters provides three new classes of AuNCs through a controllable reaction sequence. The synthesis involves an initial ligand metathesis reaction to produce [Au₁₁(di-NHC)(PPh₃)₆Cl₂]⁺ (type 1 clusters), followed by a thermally induced rearrangement/metal complex addition with the formation of Au₁₃ clusters [Au₁₃(di-NHC)₂(PPh₃)₄Cl₄]⁺ (type 2 clusters). Finally, an additional metathesis process yields [Au₁₃(di-NHC)₃(PPh₃)₃Cl₃]²⁺ (type 3 clusters). The electronic and steric properties of the employed di-NHC ligand affect the product distribution, leading to the isolation and full characterization of different clusters as the main product. A type 3 cluster has been also structurally characterized and was preliminarily found to be strongly emissive in solution.

An Open-Shell Superatom Cluster Ta10- with Enhanced Stability by United d-d π Bonds and d-Orbital Superatomic States

We carried out a comprehensive study on the gas-phase reactions of Ta_n^- (n = 5-27) with nitrogen using a customized reflection time-of-flight mass spectrometer coupled with a velocity map imaging apparatus (Re-TOFMS-VMI). Among the studied tantalum clusters, Ta₁₀^- exhibits prominent mass abundance indicative of its unique inertness. DFT calculation results revealed a D_4d bipyramidal prolate structure of the most stable Ta₁₀^-, which was verified by photoelectron spectroscopy experiments. The calculations also unveiled that Ta₁₀^- has the largest HOMO-LUMO gap and second-order difference of binding energy among the studied clusters. This is associated with its well-organized superatomic orbitals, which consist of both 6s and 5d orbitals of tantalum atoms, allowing for splitting of superatomic 1D and 2P orbitals and an enlarged gap between the singly occupied molecular orbital (SOMO) and unoccupied β counterpart, which brings forth stabilization energy pertaining to Jahn-Teller distortion. Also, the SOMO exhibits a united d-d π orbital pattern that embraces the central Ta₈^- moiety.

Template-assisted alloying of atom-precise silver nanoclusters: a new approach to generate cluster functionality

To acquire the atomic design of new functional Ag(i) nanoclusters (NCs), a new synthetic approach of site-specific alloying has been unveiled, by which the neutral CO2 templated Ag20 core is confined through Cu containing two peripheral motif units. The impact of surface charge, size and shape of the template on the self-assembly of Ag(i) has been precisely controlled here for the first time and as a result, a similar pentagonal gyrobicupola-like Ag20 core is formed while varying the templates (S2-, CO3 2- and CO2). However, the surface charge generated on the Ag(i) core due to the presence of a neutral template opens up the possibility of this novel alloying process. The introduction of strongly interacted peripheral motif units (DMA-CuS-) on the Ag20 core enforces more rigidity in the skeleton that reduces the probability of non-radiative transition in the excited state by lowering the intramolecular vibration. In addition to this, the incorporation of electron-donating peripheral motif units modulates the frontier molecular arrangement that helps in attaining the synergy which would ultimately turn on the room-temperature emission properties. The electron-donating effect of the peripheral motif units further leads to a sharp reduction of the bandgap and the symmetric position of the heterometal in the cluster minimizes the intercluster distances which further influences the intercluster charge carrier transport. So, the precise structure-property correlation with this novel synthetic approach will pave the way for a well-functioning NC design.

Enhanced Fluorescence with Tunable Color in Doped Diphosphine-Protected Gold Nanoclusters

Rational control of the luminescent properties of ligand-protected coinage metal clusters has long been pursued but remains challenging. Here we explore the crucial structural and electronic factors governing the fluorescence of a diphosphine-protected [Au₁₃(dppe)₅Cl₂]³⁺ cluster by time-dependent density functional theory calculations. By substituting the central Au atom with group 5 to group 11 transition metal atoms, the emission wavelength is adjustable from red to blue, accompanied by enhanced fluorescence intensity compared with the undoped cluster. The evolution of light-emitting behavior upon doping and the corresponding roles of the dopant, Au cage, ligands, and their interplay are interpreted at the electronic structure level. In particular, strong dopant-Au cage interaction associated with large electron-hole overlap on the dopant are is a key factor to endow large emission energy and intensity. These theoretical results provide vital guidance for designing atomically precise nanoclusters with visible fluorescence and high quantum yield for practical uses.

Electron Affinities of Ligated Icosahedral M13 Superatoms Revisited by Gas-Phase Anion Photoelectron Spectroscopy

The electron binding energies of the ligand-protected gold/silver-based cluster anions, [Au₂₅(SR)₁₈]^-, [XAg₂₄(SR')₁₈]^2- (X = Ag⁺, Au⁺, Pd⁰, or Pt⁰), and [PdAu₂₄(C≡CR″)₁₈]^2- having icosahedral M₁₃ superatomic cores, were reexamined by gas-phase photoelectron spectroscopy (PES) on a significantly intensified mass-selected ion beam. Laser fluence-dependent PE spectra and pump-probe PES revealed that the previous PE spectra were contaminated by PE signals due to the two-photon electron detachment via long-lived photoexcited states. Although the adiabatic electron affinities (AEAs) of the corresponding oxidized forms were found to be 1-2 eV larger than those previously reported, the effects of doping and ligation were not qualitatively affected. (1) The AEA of the Ag₁₃ superatom (∼4 eV) was not appreciably affected by doping a Au atom at the center but was reduced by ∼2 eV by doping Pd or Pt, and (2) the AEA of PdAu₁₂ protected by Au₂(C≡CR″)₃ units was much larger than that of PdAg₁₂ protected by Ag₂(SR')₃ units.

Evidence for triplet-state-dominated luminescence in biicosahedral superatomic molecular Au25 clusters

In photoluminescence (PL) quenching and triplet fusion upconversion experiments with fluorescent organic-molecule quenchers, it was revealed that a rod-shaped, phosphine- and thiolate-protected biicosahedral Au₂₅ cluster (a representative di-superatomic molecule) exhibits only phosphorescence, not fluorescence, at room temperature with an intersystem crossing quantum yield of almost 100%. By virtue of these photophysical properties, this cluster can be used as a triplet sensitizer that undergoes direct singlet-triplet transitions in the near-infrared (NIR) region (730-900 nm), inducing photon upconversion from NIR to visible light.

Poly-phenylene jacketed tailor-made dendritic phenylazomethine ligand for nanoparticle synthesis

Synthesizing metal clusters with a specific number of atoms on a preparative scale for studying advanced properties is still a challenge. The dendrimer templated method is powerful for synthesizing size or atomicity controlled nanoparticles. However, not all atomicity is accessible with conventional dendrimers. A new tailor-made phenylazomethine dendrimer (DPA) with a limited number of coordination sites (n = 16) and a non-coordinating large poly-phenylene shell was designed to tackle this problem. The asymmetric dendron and adamantane core four substituted dendrimer (PPDPA16) were successfully synthesized. The coordination behavior confirmed the accumulation of 16 metal Lewis acids (RhCl₃, RuCl₃, and SnBr₂) to PPDPA16. After the reduction of the complex, low valent metal nanoparticles with controlled size were obtained. The tailor-made dendrimer is a promising approach to synthesize a variety of metal clusters with desired atomicity.

A Review of State of the Art in Phosphine Ligated Gold Clusters and Application in Catalysis

Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.

Insight Into the Stability and Electronic and Optical Properties of N-Heterocyclic Carbene Analogues of Halogen/Phosphine-Protected Au13 Superatomic Clusters

Atomically precise gold nanoclusters (AuNCs) belong to a relevant area offering useful templates with tunable properties toward functional nanostructures. In this work, we explored the feasible incorporation of N-heterocyclic carbenes (NHCs), as part of the protecting-ligand shell in AuNCs. Our results, which are based on the substitution of phosphine ligands in experimentally characterized AuNCs by NHCs in various eight-electron superatoms Au₁₃ and M₄Au₉ (M = Cu, Ag), indicate similar electronic structure and stability but somewhat different optical properties. These findings support the feasible obtention of novel targets for explorative synthetic efforts featuring NHC ligands on medium-sized species based on the recurrent Au₁₃ icosahedral core. The hypothetical species appear to be interesting templates for building blocks in nanostructured materials with tuned properties, which encourage experimental exploration of ligand versatility in homo- and heterometallic superatomic clusters.

Ligand-Core Interaction in Ligand-Protected Ag25(XR)18 (X= S, Se, Te) Superatoms. Evaluation of Anchor Atom Role via Relativistic DFT Calculations

The isostructural and isoelectronic silver [Ag25(SR)18]- (R=Ligand) cluster to [Au25(SR)18]- gold clusters allows to further understand the fundamental similarities between Au and Ag, at the ultrasmall nanoscale (< 2 nm)...

Atomically Precise Silver Nanocluster for Artificial Light-Harvesting System Through Supramolecular Functionalization

Designing an artificial light-harvesting system (LHS) with high energy transfer efficiency has been a challenging task. Herein, we report an atom-precise silver nanocluster (Ag NC) as a unique platform to fabricate the artificial LHS. A facile one-pot synthesis of [Cl@Ag₁₆S(S-Adm)₈(CF₃COO)₅(DMF)₃(H₂O)₂]·DMF (Ag₁₆) NC by using a bulky adamantanethiolate ligand is portrayed here which, in turn, alleviates the issues related to the smaller NC core designed from a highly steric environment. The surface molecular motion of this NC extends the non-radiative relaxation rate which is strategically restricted by a recognition site-specific supramolecular adduct with β-cyclodextrin (β-CD) that results in the generation of a blue emission. This emission property is further controlled by the number of attached β-CD which eventually imposes more rigidity. The higher emission quantum yield and the larger emission lifetime relative to the lesser numbered β-CD conjugation signify Ag₁₆ ∩ β-CD₂ as a good LHS donor component. In the presence of an organic dye (β-carotene) as an energy acceptor, an LHS is fabricated here via the Förster resonance energy transfer pathway. The opposite charges on the surfaces and the matched electronic energy distribution result in a 93% energy transfer efficiency with a great antenna effect from the UV-to-visible region. Finally, the harvested energy is utilized successfully for efficient photocurrent generation with much-enhanced yields compared to the individual components. This fundamental investigation into highly-efficient energy transfer through atom-precise NC-based systems will inspire additional opportunities for designing new LHSs in the near future.

A β-cyclodextrin functionalized atomically precise Ag₁₆ based artificial light-harvesting system is fabricated with 93% energy transfer efficiency from the blue to the green emission region of the acceptor β-carotene molecule.

Alloying dichalcogenolate-protected Ag21 eight-electron nanoclusters: a DFT investigation

The isoelectronic doping of dichalcogenolato nanoclusters of the type [Ag₂₁{E₂P(OR)₂}₁₂]⁺ (E = S, Se) by any heteroatom belonging to groups 9-12 was systematically investigated using DFT calculations. Although they can differ in their global structure, all of these species have the same M@M₁₂-centered icosahedral core. In any case, the different structure types are all very close in energy. In all of them, three different alloying sites can be identified (central, icosahedral, peripheral) and calculations allowed the trends in heteroatom site occupation preference across the group 9-12 family to be revealed. These trends are supported by complementary experimental results. They were rationalized on the basis of electronegativity, potential involvement in the bonding of valence d-orbitals and atom size. TD-DFT calculations showed that the effect of doping on optical properties is sizable and this should stimulate research on the modulation of luminescence properties in the dithiolato and diseleno families of complexes.

Decorating an anisotropic Au13 core with dendron thiolates: enhancement of optical absorption and photoluminescence

We successfully introduced up to 12 poly(benzyl ether)dendron-thiols of the second generation (D2SH) into the Au₁₃ core of [Au₂₃(ScC₆H₁₁)₁₆]^- while retaining the geometric structure. The decoration with D2SH enhanced the optical absorbance in the >2.5 eV region and the quantum yield of photoluminescence at ∼1.6 eV by ∼15 times.

A Face-to-Face Dimer of Au3 Superatoms Supported by Interlocked Tridentate Scaffolds Formed in Au18 S2 (SR)12

A new sulfur-containing gold cluster, Au₁₈ S₂ (STipb)₁₂ , was serendipitously obtained using the bulky thiol, 2,4,6-triisopropylbenzyl mercaptan (TipbSH), as protecting ligands. Single-crystal X-ray diffraction analysis revealed that Au₁₈ S₂ (STipb)₁₂ has a deformed octahedral Au₆ core clutched by two tridentate S[Au₂ (STipb)₂ ]₃ units in an interlocked manner. Based on density functional theory calculations, we propose that the Au₆ core with two electrons is better viewed as a face-to-face dimer of Au₃ (1e) superatoms rather than an electronically closed Au₆ (2e) superatom. In situ formation of the sulfide anions (S^2- ) via C-S bond breakage is ascribed to the steric repulsion between the TipbS ligands.

Ensembles from silver clusters and cucurbit[6]uril-containing linkers

In this work, organic supramolecular linkers involving cucubit[6]urils CB[6] and N,N'-hexamethylene-bis(pyrazinyl hexafluorophosphate) (BPHF@CB[6]) were utilized to assemble dodenuclear silver chalcogenolate clusters into three one-dimensional (1D) materials under different synthesis conditions. These three crystal structures of CB[6]-based sliver cluster-organic rotaxane frameworks were well resolved, and their emission properties were investigated systematically. This construction strategy involving organic supramolecular linkers gives a new methodology for cluster-assembled materials with intriguing structural and functional properties.

Critical Role of CF3 Groups in the Electronic Stabilization of [PdAu24(C≡CC6H3(CF3)2)18]2- as Revealed by Gas-Phase Anion Photoelectron Spectroscopy

The role of alkynyl ligands with electron-withdrawing nature in the stability of metal clusters was investigated by gas-phase anion photoelectron spectroscopy (PES) on heteroleptic cluster anions [PdAu₂₄(C≡CAr^F)_18-x(C≡CPh)_x]^2- (Ar^F = 3,5-(CF₃)₂C₆H₃). Gas-phase PES on the cluster anions with specific x (= 0-6) revealed that electron binding energies decreased linearly with x, indicating that the electron-withdrawing CF₃ substituents on the alkynyl ligand played a critical role in the electronic stabilization of [PdAu₂₄(C≡CAr^F)₁₈]^2-. Density functional theory calculations reproduced the decrease of electron binding energies and rationally explained the ligand effect by a mechanism similar to the modulation of the work function of gold films by organic monolayers.

Selective ligand exchange synthesis of Au16(2-PET)14 from Au15(SG)13

Replacement of protecting ligands of gold nanoclusters by ligand exchange has become an established post-synthetic tool for selectively modifying the nanoclusters' properties. Several Au nanoclusters are known to additionally undergo size transformations upon ligand exchange, enabling access to cluster structures that are difficult to obtain by direct synthesis. This work reports on the selective size transformation of Au₁₅(SG)₁₃ (SG: glutathione) nanoclusters to Au₁₆(2-PET)₁₄ (2-PET: 2-phenylethanethiol) nanoclusters through a two-phase ligand exchange process at room temperature. Among several parameters evaluated, the addition of a large excess of exchange thiol (2-PET) to the organic phase was identified as the key factor for the structure conversion. After exchange, the nature of the clusters was determined by UV-vis, electrospray ionization-time of flight mass spectrometry, attenuated total reflection-Fourier transform infrared, and extended x-ray absorption fine-structure spectroscopy. The obtained Au₁₆(2-PET)₁₄ clusters proved to be exceptionally stable in solution, showing only slightly diminished UV-vis absorption features after 3 days, even when exposed to an excess of thiol ligands.

A homoleptic alkynyl-protected [Ag9Cu6( t BuC[triple bond, length as m-dash]C)12]+ superatom with free electrons: synthesis, structure analysis, and different properties compared with the Au7Ag8 cluster in the M15 + series

We report the first homoleptic alkynyl-protected AgCu superatomic nanocluster [Ag9Cu6( t BuC[triple bond, length as m-dash]C)12]+ (NC 1, also Ag9Cu6 in short), which has a body-centered-cubic structure with a Ag1@Ag8@Cu6 metal core. Such a configuration is reminiscent of the reported AuAg bimetallic nanocluster [Au1@Ag8@Au6( t BuC[triple bond, length as m-dash]C)12]+ (NC 2, also Au7Ag8 in short), which is also synthesized by an anti-galvanic reaction (AGR) approach with a very high yield for the first time in this study. Despite a similar Ag8 cube for both NCs, structural anatomy reveals that there are some subtle differences between NCs 1 and 2. Such differences, plus the different M1 kernel and M6 octahedron, lead to significantly different optical absorbance features for NCs 1 and 2. Density functional theory calculations revealed the LUMO and HOMO energy levels of NCs 1 and 2, where the characteristic absorbance peaks can be correlated with the discrete molecular orbital transitions. Finally, the stability of NCs 1 and 2 at different temperatures, in the presence of an oxidant or Lewis base, was investigated. This study not only enriches the M15 + series, but also sets an example for correlating the structure-property relationship in alkynyl-protected bimetallic superatomic clusters.

Physical Origin of Dual-Emission of Au-Ag Bimetallic Nanoclusters

On the origin of photoluminescence of noble metal NCs, there are always hot debates: metal-centered quantum-size confinement effect VS ligand-centered surface state mechanism. Herein, we provided solid evidence that structural water molecules (SWs) confined in the nanocavity formed by surface-protective-ligand packing on the metal NCs are the real luminescent emitters of Au-Ag bimetal NCs. The Ag cation mediated Au-Ag bimetal NCs exhibit the unique pH-dependent dual-emission characteristic with larger Stokes shift up to 200 nm, which could be used as potential ratiometric nanosensors for pH detection. Our results provide a completely new insight on the understanding of the origin of photoluminescence of metal NCs, which elucidates the abnormal PL emission phenomena, including solvent effect, pH-dependent behavior, surface ligand effect, multiple emitter centers, and large-Stoke's shift.