Nonadiabatic dynamics in multidimensional complex potential energy surfaces

Complex potential energy surfaces with projected CAP technique: Vibrational excitation of N2

The projected complex absorbing potential (CAP) technique is one of the methods that allow one to extend the bound state methods for computing resonances' energies and widths. Here, we explore the accuracy of the potential energy curves generated with different electronic structure theory methods in combination with the projected CAP technique by considering resonant vibrational excitation (RVE) of N2 by electron impact as a model process. We report RVE cross sections computed using the boomerang model with potential energy curves obtained with CAP-based extended multistate complete active space perturbation theory (XMS-CASPT2) and equation of motion coupled-cluster method for electron attachment with single and double substitution (EOM-EA-CCSD) methods. We also compare potential energy curves computed with several electronic structure methods, including XMS-CASPT2, EOM-EA-CCSD, multireference configuration interaction with singles (MR-CIS) and singles and doubles (MR-CISD). A good agreement is observed between the experiment and simulated RVE cross sections obtained with the potential energy curves generated with XMS-CASPT2 and EOM-EA-CCSD methods, thus highlighting the potential of the projected CAP technique combined with accurate electronic structure methods for dynamical simulations of the processes that proceed through metastable electronic states.

Solving Vibronic Dynamics in Electron Continuum

We present a general two-dimensional model of conical intersection between metastable states that are vibronically coupled not only directly but also indirectly through a virtual electron in the autodetachment continuum. This model is used as a test ground for the design and comparison of iterative solvers for resonance dynamics in low-energy electron-molecule collisions. Two Krylov-subspace methods with various preconditioning schemes are compared. To demonstrate the applicability of the proposed methods on even larger models, we also test the performance of one of the methods on a recent model of vibrational excitation of CO2 by electron impact based on three vibronically coupled discrete states in continuum (Renner-Teller doublet of shape resonances coupled to a sigma virtual state) including four vibrational degrees of freedom. Two-dimensional electron energy-loss spectra resulting from electron-molecule scattering within the models are briefly discussed.

Non-Hermitian molecular dynamics simulations of exciton-polaritons in lossy cavities

The observation that materials can change their properties when placed inside or near an optical resonator has sparked a fervid interest in understanding the effects of strong light-matter coupling on molecular dynamics, and several approaches have been proposed to extend the methods of computational chemistry into this regime. Whereas the majority of these approaches have focused on modeling a single molecule coupled to a single cavity mode, changes to chemistry have so far only been observed experimentally when very many molecules are coupled collectively to multiple modes with short lifetimes. While atomistic simulations of many molecules coupled to multiple cavity modes have been performed with semi-classical molecular dynamics, an explicit description of cavity losses has so far been restricted to simulations in which only a very few molecular degrees of freedom were considered. Here, we have implemented an effective non-Hermitian Hamiltonian to explicitly treat cavity losses in large-scale semi-classical molecular dynamics simulations of organic polaritons and used it to perform both mean-field and surface hopping simulations of polariton relaxation, propagation, and energy transfer.

Theoretical Advances in Polariton Chemistry and Molecular Cavity Quantum Electrodynamics

When molecules are coupled to an optical cavity, new light-matter hybrid states, so-called polaritons, are formed due to quantum light-matter interactions. With the experimental demonstrations of modifying chemical reactivities by forming polaritons under strong light-matter interactions, theorists have been encouraged to develop new methods to simulate these systems and discover new strategies to tune and control reactions. This review summarizes some of these exciting theoretical advances in polariton chemistry, in methods ranging from the fundamental framework to computational techniques and applications spanning from photochemistry to vibrational strong coupling. Even though the theory of quantum light-matter interactions goes back to the midtwentieth century, the gaps in the knowledge of molecular quantum electrodynamics (QED) have only recently been filled. We review recent advances made in resolving gauge ambiguities, the correct form of different QED Hamiltonians under different gauges, and their connections to various quantum optics models. Then, we review recently developed ab initio QED approaches which can accurately describe polariton states in a realistic molecule-cavity hybrid system. We then discuss applications using these method advancements. We review advancements in polariton photochemistry where the cavity is made resonant to electronic transitions to control molecular nonadiabatic excited state dynamics and enable new photochemical reactivities. When the cavity resonance is tuned to the molecular vibrations instead, ground-state chemical reaction modifications have been demonstrated experimentally, though its mechanistic principle remains unclear. We present some recent theoretical progress in resolving this mystery. Finally, we review the recent advances in understanding the collective coupling regime between light and matter, where many molecules can collectively couple to a single cavity mode or many cavity modes. We also lay out the current challenges in theory to explain the observed experimental results. We hope that this review will serve as a useful document for anyone who wants to become familiar with the context of polariton chemistry and molecular cavity QED and thus significantly benefit the entire community.

Surface hopping modeling of charge and energy transfer in active environments

An active environment is any atomic or molecular system changing a chromophore's nonadiabatic dynamics compared to the isolated molecule. The action of the environment on the chromophore occurs by changing the potential energy landscape and triggering new energy and charge flows unavailable in the vacuum. Surface hopping is a mixed quantum-classical approach whose extreme flexibility has made it the primary platform for implementing novel methodologies to investigate the nonadiabatic dynamics of a chromophore in active environments. This Perspective paper surveys the latest developments in the field, focusing on charge and energy transfer processes.

Excitation and fragmentation of the dielectric gas C4F7N: Electrons vs photons

C₄F₇N is a promising candidate for the replacement of sulfur hexafluoride as an insulating medium, and it is important to understand the chemical changes initiated in the molecule by collision with free electrons, specifically the formation of neutral fragments. The first step of neutral fragmentation is electronic excitation, yet neither the absorption spectrum in the vacuum ultraviolet (VUV) region nor the electron energy loss spectrum have previously been reported. Here, we experimentally probed the excited states by VUV photoabsorption spectroscopy and electron energy loss spectroscopy (EELS). We found that the distribution of states populated upon electron impact with low-energy electrons is significantly different from that following photoabsorption. This difference was confirmed and interpreted with ab initio modeling of both VUV and EELS spectra. We propose here a new computational protocol for the simulation of EELS spectra combining the Born approximation with approximate forms of correlated wave functions, which allows us to calculate the (usually very expensive) scattering cross sections at a cost similar to the calculation of oscillator strengths. Finally, we perform semi-classical non-adiabatic dynamics simulations to investigate the possible neutral fragments of the molecule formed through electron-induced neutral dissociation. We show that the product distribution is highly non-statistical.

Distant Symmetry Control in Electron-Induced Bond Cleavage

We experimentally show that N-H bond cleavage in the pyrrole molecule following resonant electron attachment is allowed and controlled by the motion of the atoms which are not dissociating, namely, of the carbon-attached hydrogen atoms. We use this fact to steer the efficiency of this bond cleavage. In order to interpret the experimental findings, we have developed a method for locating all resonant and virtual states of an electron-molecule system in the complex plane, based on all-electron R-matrix scattering calculations. Mapping these as a function of molecular geometry allows us to separate two contributing dissociation mechanisms: a π* resonance formation inducing strong bending deformations and a nonresonant σ* mechanism originating in a virtual state. The coupling between the two mechanisms is enabled by the out-of-plane motion of the C-H bonds, and we show that it must happen on an ultrafast (few fs) time scale.

Newton-X Platform: New Software Developments for Surface Hopping and Nuclear Ensembles

Newton-X is an open-source computational platform to perform nonadiabatic molecular dynamics based on surface hopping and spectrum simulations using the nuclear ensemble approach. Both are among the most common methodologies in computational chemistry for photophysical and photochemical investigations. This paper describes the main features of these methods and how they are implemented in Newton-X. It emphasizes the newest developments, including zero-point-energy leakage correction, dynamics on complex-valued potential energy surfaces, dynamics induced by incoherent light, dynamics based on machine-learning potentials, exciton dynamics of multiple chromophores, and supervised and unsupervised machine learning techniques. Newton-X is interfaced with several third-party quantum-chemistry programs, spanning a broad spectrum of electronic structure methods.

Incorporating Lindblad Decay Dynamics into Mixed Quantum-Classical Simulations

We derive the $\mathcal{L}$-MFE method to incorporate Lindblad jump operator dynamics into the mean-field Ehrenfest (MFE) approach. We map the density matrix evolution of Lindblad dynamics onto pure state coefficients using trajectory averages. We use simple assumptions to construct the $\mathcal{L}$-MFE method that satisfies this exact mapping. This establishes a method that uses independent trajectories which exactly reproduces Lindblad decay dynamics using a wavefunction description, with deterministic changes of the magnitudes of the quantum expansion coefficients, while only adding on a stochastic phase. We further demonstrate that when including nuclei in the Ehrenfest dynamics, the $\mathcal{L}$-MFE method gives semi-quantitatively accurate results, with the accuracy limited by the accuracy of the approximations present in the semiclassical MFE approach. This work provides a general framework to incorporate Lindblad dynamics into semiclassical or mixed quantum-classical simulations.

Multireference Approach to Normal and Resonant Auger Spectra Based on the One-Center Approximation

A methodology to calculate the decay rates of normal and resonant Auger processes in atoms and molecules based on the One-Center Approximation (OCA), using atomic radial Auger integrals, is implemented within the restricted-active-space self-consistent-field (RASSCF) and the multistate restricted-active-space perturbation theory of second order (MS-RASPT2) frameworks, as part of the OpenMolcas project. To ensure an unbiased description of the correlation and relaxation effects on the initial core excited/ionized states and the final cationic states, their wave functions are optimized independently, whereas the Auger matrix elements are computed with a biorthonormalized set of molecular orbitals within the state-interaction (SI) approach. As a decay of an isolated resonance, the computation of Auger intensities involves matrix elements with one electron in the continuum. However, treating ionization and autoionization problems can be overwhelmingly complicated for nonexperts, because of many peculiarities, in comparison to bound-state electronic structure theory. One of the advantages of our approach is that by projecting the intensities on the atomic center bearing the core hole and using precalculated atomic radial two-electron integrals, the Auger decay rates can be easily obtained directly with OpenMolcas, avoiding the need to interface it with external programs to compute matrix elements with the photoelectron wave function. The implementation is tested on the Ne atom, for which numerous theoretical and experimental results are available for comparison, as well as on a set of prototype closed- and open-shell molecules, namely, CO, N₂, HNCO, H₂O, NO₂, and C₄N₂H₄ (pyrimidine).

Theoretical Challenges in Polaritonic Chemistry

Polaritonic chemistry exploits strong light-matter coupling between molecules and confined electromagnetic field modes to enable new chemical reactivities. In systems displaying this functionality, the choice of the cavity determines both the confinement of the electromagnetic field and the number of molecules that are involved in the process. While in wavelength-scale optical cavities the light-matter interaction is ruled by collective effects, plasmonic subwavelength nanocavities allow even single molecules to reach strong coupling. Due to these very distinct situations, a multiscale theoretical toolbox is then required to explore the rich phenomenology of polaritonic chemistry. Within this framework, each component of the system (molecules and electromagnetic modes) needs to be treated in sufficient detail to obtain reliable results. Starting from the very general aspects of light-molecule interactions in typical experimental setups, we underline the basic concepts that should be taken into account when operating in this new area of research. Building on these considerations, we then provide a map of the theoretical tools already available to tackle chemical applications of molecular polaritons at different scales. Throughout the discussion, we draw attention to both the successes and the challenges still ahead in the theoretical description of polaritonic chemistry.

Recent progress in approximate quantum dynamics methods for the study of proton-coupled electron transfer reactions

Proton-coupled electron transfer (PCET) reactions are ubiquitous natural processes at the heart of energy conversion reactions in photosynthesis and respiration, DNA repair, and diverse enzymatic reactions. Theoretical formulation and computational method developments have eyed modeling of thermal and photoinduced PCET for the last three decades. The accumulation of these studies, collected in dozens of reviews, accounts, and perspectives, has firmly established the influence of quantum effects, including non-adiabatic electronic transitions, vibrational relaxation, zero-point energy, and proton tunneling, on the rate and mechanism of PCET reactions. Here, we focus on some recently-developed methods, spanning the last eight years, that can quantitatively capture these effects in the PCET context and provide efficient means for their qualitative description in complex systems. The theoretical background of each method and their accuracy with respect to exact results are discussed and the results of relevant PCET simulations based on each method are presented.

Selective bond breaking of halothane induced by electron transfer in potassium collisions

We present novel experimental results of negative ion formation of halothane (C₂HBrClF₃) upon electron transfer from hyperthermal neutral potassium atoms (K°) in the collision energy range of 8-1000 eV. The experiments were performed in a crossed molecular beam setup allowing a comprehensive analysis of the time-of-flight (TOF) mass negative ions fragmentation pattern and a detailed knowledge of the collision dynamics in the energy range investigated. Such TOF mass spectra data show that the only negative ions formed are Br^-, Cl^- and F^-, with a strong energy dependence in the low-energy collision region, with the bromine anion being the most abundant and sole fragment at the lowest collision energy probed. In addition, potassium cation (K⁺) energy loss spectra in the forward scattering direction were obtained in a hemispherical energy analyser at different K° impact energies. In order to support our experimental findings, ab initio quantum chemical calculations have been performed to help interpret the role of the electronic structure of halothane. Potential energy curves were obtained along the C-X (X = Br, Cl) coordinate to lend support to the dissociation processes yielding anion formation.

Role of Cavity Losses on Nonadiabatic Couplings and Dynamics in Polaritonic Chemistry

We present a non-Hermitian formulation of the polaritonic structure of azobenzene strongly coupled to a photonic mode that explicitly accounts for the fleeting nature of the photon-molecule interaction. This formalism reveals that the polaritonic nonadiabatic couplings that facilitate cis-trans isomerization can be dramatically modified by photonic dissipation. We perform Fewest-Switches Surface Hopping dynamics on the surfaces that derive from our non-Hermitian formalism and find that the polaritonic isomerization yields are strongly suppressed for moderate dissipation rates and that cavity-free isomerization dynamics are recovered under large dissipation rates. These findings highlight the important role that the finite lifetime of photonic degrees of freedom play in polaritonic chemistry.