Ionic effects on synthetic polymers: from solutions to brushes and gels

Concurrently Improving both Mechanical and Electrochemical Performances of Quasi-Solid-State Electrical Double-Layer Capacitors by a Rational Design of Gel Polymer Electrolytes

Aqueous poly(vinyl alcohol) (PVA) gel electrolyte-based quasi-solid-state electrical double-layer capacitors (QSEDLCs) have been extensively investigated in the past ten years, but challenges remain to fabricate the PVA gel electrolyte possessing both superior mechanical and outstanding electrochemical performances. Herein, we develop a strategy to address this issue by a rational design of PVA gel electrolytes, based on a combination of the freeze-thaw (FT) method and sodium perchlorate (NaClO4)-based water-in-salt (WIS) electrolyte. Our study demonstrates that either the FT method or the NaClO4-based WIS electrolyte can improve both the mechanical performance of the PVA gel electrolyte by increasing the crystallization of PVA chains and the electrochemical performance of the PVA gel electrolyte-based QSEDLC by different mechanisms. In comparison with the conventional solvent evaporation method, this work provides an effective strategy to concurrently improve both the mechanical and electrochemical performances of aqueous QSEDLCs.

A Total Internal Reflection Microscopy (TIRM)-Based Approach for Direct Characterization of Polymer Brush Conformational Change in Aqueous Solution

This study presents a novel approach utilizing total internal reflection microscopy (TIRM) to effectively characterize the swelling and collapse of polymer brushes in aqueous solutions. Zwitterionic poly(carboxybetaine methacrylate) (PCBMA) and nonionic poly[oligo(ethylene glycol) methyl ether methacrylate] (POEGMA) brushes are chosen as model systems. By investigation of an intriguing theory-experiment discrepancy observed during the measurement of near-wall hindered diffusion, valuable insights into the compressibility of polymer brushes are obtained, revealing their conformational information in aqueous solution. The results demonstrate that zwitterionic PCBMA brushes exhibit minimal antipolyelectrolyte effects in 0.1-10 mM NaCl solution but undergo significant swelling with increasing pH. On the other hand, nonionic POEGMA brushes exhibit similar responses to ionic strength as weak polyelectrolyte brushes. These unexpected findings enhance our understanding of polymer brushes beyond classical theories. The TIRM-based approach proves to be effective for characterizing polymer brushes and other soft nanomaterials.

Ion-Specific Interactions Engender Dynamic and Tailorable Properties in Biomimetic Cationic Polyelectrolytes

Biomaterials such as spider silk and mussel byssi are fabricated by the dynamic manipulation of intra- and intermolecular biopolymer interactions. Organisms modulate solution parameters, such as pH and ion co-solute concentration, to effect these processes. These biofabrication schemes provide a conceptual framework to develop new dynamic and responsive abiotic soft material systems. Towards these ends, the chemical diversity of readily available ionic compounds offers a broad palette to manipulate the physicochemical properties of polyelectrolytes via ion-specific interactions. In this study, we show for the first time that the ion-specific interactions of biomimetic polyelectrolytes engenders a variety of phase separation behaviors, creating dynamic thermal- and ion-responsive soft matter that exhibits a spectrum of physical properties, spanning viscous fluids to viscoelastic and viscoplastic solids. These ion-dependent characteristics are further rendered general by the merger of lysine and phenylalanine into a single, amphiphilic vinyl monomer. The unprecedented breadth, precision, and dynamicity in the reported ion-dependent phase behaviors thus introduce a broad array of opportunities for the future development of responsive soft matter; properties that are poised to drive developments in critical areas such as chemical sensing, soft robotics, and additive manufacturing.

Magnetic Silver Nanoparticles Stabilized by Superhydrophilic Polymer Brushes with Exceptional Kinetics and Catalysis

Stimuli-responsive catalysts with exceptional kinetics and complete recoverability for efficient recyclability are essential in, for example, converting pollutants and hazardous organic compounds into less harmful chemicals. Here, we used a novel approach to stabilize silver nanoparticles (NPs) through magneto/hydro-responsive anionic polymer brushes that consist of poly (acrylic acid) (PAA) moieties at the amine functional groups of chitosan. Two types of responsive catalyst systems with variable silver loading (wt.%) of high and low (PAAgCHI/Fe3O4/Ag (H, L)) were prepared. The catalytic activity was evaluated by monitoring the reduction of organic dye compounds, 4-nitrophenol and methyl orange in the presence of NaBH4. The high dispersity and hydrophilic nature of the catalyst provided exceptional kinetics for dye reduction that surpassed previously reported nanocatalysts for organic dye reduction. Dynamic light scattering (DLS) measurements were carried out to study the colloidal stability of the nanocatalysts. The hybrid materials not only showed enhanced colloidal stability due to electrostatic repulsion among adjacent polymer brushes but also offered more rapid kinetics when compared with as-prepared Ag nanoparticles (AgNPs), which results from super-hydrophilicity and easy accumulation/diffusion of dye species within polymer brushes. Such remarkable kinetics, biodegradability, biocompatibility, low cost and facile magnetic recoverability of the Ag nanocatalysts reported here contribute to their ranking among the top catalyst systems reported in the literature. It was observed that the apparent catalytic rate constant for the reduction of methyl orange dye was enhanced, PAAgCHI/Fe3O4/Ag (H) ca. 35-fold and PAAgCHI/Fe3O4/Ag (L) ca. 23-fold, when compared against the as prepared AgNPs. Finally, the regeneration and recyclability of the nanocatalyst systems were studied over 15 consecutive cycles. It was demonstrated that the nanomaterials display excellent recyclability without a notable loss in catalytic activity.

Critical Conditions Regulating the Gelation in Macroionic Cluster Solutions

The critical gelation conditions observed in dilute aqueous solutions of multiple nanoscale uranyl peroxide molecular clusters are reported, in the presence of multivalent cations. This gelation is dominantly driven by counterion-mediated attraction. The gelation areas in the corresponding phase diagrams all appear in similar locations, with a characteristic triangle shape outlining three critical boundary conditions, corresponding to the critical cluster concentration, cation/cluster ratio, and the degree of counterion association with increasing cluster concentration. These interesting phrasal observations reveal general conditions for gelation driven by electrostatic interactions in hydrophilic macroionic solutions.

Revolutionizing Cancer Treatment: Biopolymer-Based Aerogels as Smart Platforms for Targeted Drug Delivery

Cancer stands as a leading cause of global mortality, with chemotherapy being a pivotal treatment approach, either alone or in conjunction with other therapies. The primary goal of these therapies is to inhibit the growth of cancer cells specifically, while minimizing harm to healthy dividing cells. Conventional treatments, often causing patient discomfort due to side effects, have led researchers to explore innovative, targeted cancer cell therapies. Thus, biopolymer-based aerogels emerge as innovative platforms, showcasing unique properties that respond intelligently to diverse stimuli. This responsiveness enables precise control over the release of anticancer drugs, enhancing therapeutic outcomes. The significance of these aerogels lies in their ability to offer targeted drug delivery with increased efficacy, biocompatibility, and a high drug payload. In this comprehensive review, the author discuss the role of biopolymer-based aerogels as an emerging functionalized platforms in anticancer drug delivery. The review addresses the unique properties of biopolymer-based aerogels showing their smart behavior in responding to different stimuli including temperature, pH, magnetic and redox potential to control anticancer drug release. Finally, the review discusses the application of different biopolymer-based aerogel in delivering different anticancer drugs and also discusses the potential of these platforms in gene delivery applications.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Dilute polyelectrolyte solutions: recent progress and open questions

Polyelectrolytes are a class of polymers possessing ionic groups on their repeating units. Since counterions can dissociate from the polymer backbone, polyelectrolyte chains are strongly influenced by electrostatic interactions. As a result, the physical properties of polyelectrolyte solutions are significantly different from those of electrically neutral polymers. The aim of this article is to highlight key results and some outstanding questions in the polyelectrolyte research from recent literature. We focus on the influence of electrostatics on conformational and hydrodynamic properties of polyelectrolyte chains. A compilation of experimental results from the literature reveals significant disparities with theoretical predictions. We also discuss a new class of polyelectrolytes called poly(ionic liquid)s that exhibit unique physical properties in comparison to ordinary polyelectrolytes. We conclude this review by listing some key research challenges in order to fully understand the conformation and dynamics of polyelectrolytes in solutions.

Spherical Polyelectrolyte Brushes as Flocculants and Retention Aids in Wet-End Papermaking

As the criteria of energy conservation, emission reduction, and environmental protection become more important, and with the development of wet-end papermaking, developing excellent retention aids is of great significance. Spherical polyelectrolyte brushes (SPBs) bearing polyelectrolyte chains grafted densely to the surface of core particle have the potential to be novel retention aids in wet-end papermaking not only because of their spherical structure, but also due to controllable grafting density and molecular weight. Such characteristics are crucial in order to design multi-functional retention aids in sophisticated papermaking systems. This review presents some important recent advances with respect to retention aids, including single-component system and dual-component systems. Then, basic theory in papermaking is also briefly reviewed. Based on these advances, it emphatically describes spherical polyelectrolyte brushes, focused on their preparation methods, characterization, conformation, and applications in papermaking. This work is expected to contribute to improve a comprehensive understanding on the composition, properties, and function mechanisms of retention aids, which helps in the further investigation on the design of novel retention aids with excellent performance.

Molybdate and Phosphate Cross-Linked Chitosan Films for Corrosion Protection of Hot-Dip Galvanized Steel

Environmentally friendly and sustainable methods to protect hot-dip galvanized (HDG) steel from corrosion are extensively studied. Films of the biopolymer polyelectrolyte chitosan were ionically cross-linked in this work with the well-known corrosion inhibitors phosphate and molybdate. Layers on this basis are presented as components in a protective system and could, e.g., be applied in pretreatments similar to a conversion coating. For the preparation of the chitosan-based films, a procedure involving sol-gel chemistry and wet-wet application was utilized. Homogeneous films of few micrometers thickness were obtained on HDG steel substrates after thermal curing. Properties of chitosan-molybdate and chitosan-phosphate films were compared with purely passive epoxysilane-cross-linked chitosan, and pure chitosan. Delamination behavior of a poly(vinyl butyral) (PVB) weak model top coating studied by scanning Kelvin probe (SKP) showed an almost linear time dependence over >10 h on all systems. Delamination rates were 0.28 mm h^-1 (chitosan-molybdate) and 0.19 mm h^-1 (chitosan-phosphate), ca. 5% of a non-cross-linked chitosan reference and slightly higher than of the epoxsyilane cross-linked chitosan. Immersion of the treated zinc samples over 40 h in 5% NaCl solution yielded a 5-fold increase of the resistance in the chitosan-molybdate system, as evidenced by electrochemical impedance spectroscopy (EIS). Ion exchange of electrolyte anions with molybdate and phosphate triggers corrosion inhibition, presumably by reaction with the HDG surface as well described in the literature for these inhibitors. Thus, such surface treatments have potential for application, e.g., in temporary corrosion protection.

Polyacrylamide-Based Block Copolymer Bearing Pyridine Groups Shows Unexpected Salt-Induced LCST Behavior

Thermal-responsive block copolymers are a special type of macromolecule that exhibit a wide range of applications in various fields. In this contribution, we report a new type of polyacrylamide-based block copolymer bearing pyridine groups of polyethylene glycol-block-poly(N-(2-methylpyridine)-acrylamide; Px) that display distinct salt-induced lower critical solution temperature (LCST) behavior. Unexpectedly, the phase-transition mechanism of the salt-induced LCST behavior of Px block copolymers is different from that of the reported LCST-featured analogues. Moreover, their thermo-responsive behavior can be significantly regulated by several parameters such as salt species and concentration, urea, polymerization degree, polymer concentration and pH values. This unique thermal behavior of pyridine-containing block copolymers provides a new avenue for the fabrication of smart polymer materials with potential applications in biomedicine.

Effect of Counterion-Mediated Hydrogen Bonding on Polyelectrolytes at the Solid/Water Interface: Current Understanding and Perspectives

The counterion-mediated hydrogen bonding (CMHB) effect can be generated in polyelectrolyte systems when hydrogen bonds are formed between the bound counterions and polyelectrolyte chains. This Perspective mainly discusses the effect of CMHB on polyelectrolytes at the solid/water interface. The CMHB effect generated by the hydroxide (OH^-) or hydronium (H₃O⁺) counterions gives rise to a pH responsiveness of strong polyelectrolyte brushes (SPBs) whose strength can be modulated by the external salt concentration. Further studies have shown that the CMHB effect on SPBs can be extended beyond the OH^- and H₃O⁺ counterions and that the CMHB effect can be observed in the systems of weak polyelectrolyte brushes (WPBs) and polyelectrolyte multilayers (PEMs). Based on the understanding of the mechanisms of the CMHB effect on polyelectrolytes at the solid/water interface, we have demonstrated that a range of important properties of SPBs, WPBs, and PEMs can be tuned by pH with the consideration of the CMHB effect. Future directions for the CMHB effect on polyelectrolytes are also discussed. The insights on the CMHB effect on polyelectrolytes at the solid/water interface would promote the development of smart interfacial polyelectrolyte materials in a wide range of fields.

Phase Behavior of Ion-Containing Polymers in Polar Solvents: Predictions from a Liquid-State Theory with Local Short-Range Interactions

The thermodynamic phase behavior of charged polymers is a crucial property underlying their role in biology and various industrial applications. A complete understanding of the phase behaviors of such polymer solutions remains challenging due to the multi-component nature of the system and the delicate interplay among various factors, including the translational entropy of each component, excluded volume interactions, chain connectivity, electrostatic interactions, and other specific interactions. In this work, the phase behavior of partially charged ion-containing polymers in polar solvents is studied by further developing a liquid-state (LS) theory with local shortrange interactions. This work is based on the LS theory developed for fully-charged polyelectrolyte solutions. Specific interactions between charged groups of the polymer and counterions, between neutral segments of the polymer, and between charged segments of the polymer are incorporated into the LS theory by an extra Helmholtz free energy from the perturbed-chain statistical associating fluid theory (PC-SAFT). The influence of the sequence structure of the partially charged polymer is modeled by the number of connections between bonded segments. The effects of chain length, charge fraction, counterion valency, and specific short-range interactions are explored. A computational App for salt-free polymer solutions is developed and presented, which allows easy computation of the binodal curve and critical point by specifying values for the relevant model parameters.

Transport of polymer-coated metal-organic framework nanoparticles in porous media

Injecting fluids into deep underground geologic structures is a critical component to development of long-term strategies for managing greenhouse gas emissions and facilitating energy extraction operations. Recently, we reported that metal-organic frameworks are low-frequency, absorptive-acoustic metamaterial that may be injected into the subsurface to enhance geophysical monitoring tools used to track fluids and map complex structures. A key requirement for this nanotechnology deployment is transportability through porous geologic media without being retained by mineral-fluid interfaces. We used flow-through column studies to estimate transport and retention properties of five different polymer-coated MIL-101(Cr) nanoparticles (NP) in siliceous porous media. When negatively charged polystyrene sulfonate coated nanoparticles (NP-PSS-70K) were transported in 1 M NaCl, only about 8.4% of nanoparticles were retained in the column. Nanoparticles coated with polyethylenimine (NP-PD1) exhibited significant retention (> 50%), emphasizing the importance of complex nanoparticle-fluid-rock interactions for successful use of nanofluid technologies in the subsurface. Nanoparticle transport experiments revealed that nanoparticle surface characteristics play a critical role in nanoparticle colloidal stability and as well the transport.

Swelling of Thermo-Responsive Gels in Aqueous Solutions of Salts: A Predictive Model

The equilibrium degree of swelling of thermo-responsive (TR) gels is strongly affected by the presence of ions in an aqueous solution. This phenomenon plays an important role in (i) the synthesis of multi-stimuli-responsive gels for soft robotics, where extraordinary strength and toughness are reached by soaking of a gel in solutions of multivalent ions, and (ii) the preparation of hybrid gels with interpenetrating networks formed by covalently cross-linked synthetic chains and ionically cross-linked biopolymer chains. A model is developed for equilibrium swelling of a TR gel in aqueous solutions of salts at various temperatures T below and above the critical temperature at which collapse of the gel occurs. An advantage of the model is that it involves a a small (compared with conventional relations) number of material constants and allows the critical temperature to be determined explicitly. Its ability (i) to describe equilibrium swelling diagrams on poly(N-isopropylacrylamide) gels in aqueous solutions of mono- and multivalent salts and (ii) to predict the influence of volume fraction of salt on the critical temperature is confirmed by comparison of observations with results of numerical simulation.

Supersoft Elastic Bottlebrush Microspheres with Stimuli-Responsive Color-Changing Properties in Brine

Solvent-free supersoft elastomer is highly desirable for building photonic structures with significant stimuli-responsive color changes. We report supersoft elastic porous microspheres with vivid structural colors obtained via self-assembly of amphiphilic bottlebrush block copolymers at the water/oil interface templated by ordered water-in-oil-in-water double emulsions. The porous structure is composed of cross-linked bottlebrush polydimethylsiloxane (PDMS) as the supersoft elastic skeleton and bottlebrush poly(ethylene oxide) (PEO) as the internal responsive layer. The obtained microspheres show large reversible volume changes through well-controlled dehydration or hydration of PEO in response to salt ions in an aqueous environment. As a result, full-spectrum colors are obtained dependent on different salt concentrations. In-situ observation of color reflection of a microsphere indicates a gradual structural transition from the outside to the inside corresponding to migration of water molecules and salt ions. Moreover, rod-like bottlebrush PEO exhibits an anion-induced salting-out behavior different from that of random coil polymers. The significantly responsive behaviors of bottlebrush block copolymer (BBCP) assemblies in the presence of salt ions primarily rely on the supersoft elastic skeleton of the porous structure, providing a facile route to the creation of stimuli-responsive photonic materials by low-cost self-assembly methods.

Specific Anion Effects on Charged-Neutral Random Copolymers: Interplay between Different Anion-Polymer Interactions

The study of ion specificities of charged-neutral random copolymers is of great importance for understanding specific ion effects on natural macromolecules. In the present work, we have investigated the specific anion effects on the thermoresponsive behavior of poly([2-(methacryloyloxy)ethyl trimethylammonium chloride]-co-N-isopropylacrylamide) [P(METAC-co-NIPAM)] random copolymers. Our study demonstrates that the anion specificities of the P(METAC-co-NIPAM) copolymers are dependent on their chemical compositions. The specific anion effects on the copolymers with high mole fractions of poly(N-isopropylacrylamide) (PNIPAM) are similar to those on the PNIPAM homopolymer. As the mole fraction of PNIPAM decreases to a certain value, a V-shaped anion series can be observed in terms of the anion-specific cloud point temperature of the copolymer, as induced by the interplay between different anion-polymer interactions. Our study also suggests that both the direct and the indirect anion-polymer interactions contribute to the anion specificities of the copolymers. This work would improve our understanding of the relationship between the ion specificities and the ion-macromolecule interactions for naturally occurring macromolecules.

pH- and chaotropic anion-induced conformational changes of tertiary amine-containing binary heterografted star molecular bottlebrushes in aqueous solution

Three-arm star-shaped, tertiary-amine-containing bottlebrushes exhibit star-globule shape transitions in response to pH changes and addition of sufficiently strong chaotropic anions.

Effect of Buffer Anions on Pearl-Necklace Morphology of Tertiary Amine-Containing Binary Heterografted Linear Molecular Bottlebrushes in Acidic Aqueous Buffers

Molecular bottlebrushes can exhibit a multitude of distinct conformations under different conditions, and precise control of their morphology can facilitate better use of such materials in potential applications. Herein, we report a study on the effect of buffer anions on the pearl-necklace morphology of linear binary heterografted molecular brushes consisting of pH-responsive poly(2-N,N-diethylamino)ethyl methacrylate) (PDEAEMA) with a pK_a of 7.40 and thermoresponsive poly(ethoxydi(ethylene glycol) acrylate) (PDEGEA) with a lower critical solution temperature of 9 °C as side chains in various acidic aqueous buffers at 0 °C. The molecular brushes, denotated as BMB, were prepared by a grafting-to approach using copper(I)-catalyzed azide-alkyne cycloaddition reaction. Dynamic light scattering studies showed that the apparent hydrodynamic size of BMB in aqueous buffers with a pH of 6.50 at 1 °C decreased with increasing valency of buffer anions, from acetate anions with a charge of 1-, to phosphate anions carrying charges of 2- and 1- and citrate anions bearing charges of 3- and 2- at pH = 6.50. Atomic force microscopy revealed that BMB exhibited a pearl-necklace morphology from all three aqueous buffers with a pH of 6.50 when spin-cast at 0 °C. Analysis of AFM images showed that the average length of BMB and the number of beads per brush molecule decreased with increasing valency of buffer anions while the size and height of the beads increased. The pearl-necklace morphology of BMB was believed to be the result of microphase separation of the neutral PDEGEA and the charged PDEAEMA side chains along the brush backbone. Multivalent kosmotropic buffer anions formed bridging linkages between protonated tertiary amine moieties and thus "crosslinked" the charged PDEAEMA side chains, resulting in the shrinkage of BMB and enhanced microphase separation of two side chain polymers.

Competitive specific ion effects in mixed salt solutions on a thermoresponsive polymer brush

HYPOTHESIS

Grafted poly(ethylene glycol) methyl ether methacrylate (POEGMA) copolymer brushes change conformation in response to temperature ('thermoresponse'). In the presence of different ions the thermoresponse of these coatings is dramatically altered. These effects are complex and poorly understood with no all-inclusive predictive theory of specific ion effects. As natural environments are composed of mixed electrolytes, it is imperative we understand the interplay of different ions for future applications. We hypothesise anion mixtures from the same end of the Hofmeister series (same-type anions) will exhibit non-additive and competitive behaviour.

EXPERIMENTS

The behaviour of POEGMA brushes, synthesised via surface-initiated ARGET-ATRP, in both single and mixed aqueous electrolyte solutions was characterised with ellipsometry and neutron reflectometry as a function of temperature.

FINDINGS

In mixed fluoride and chloride aqueous electrolytes (salting-out ions), or mixed thiocyanate and iodide aqueous electrolytes (salting-in ions), a non-monotonic concentration-dependent influence of the two anions on the thermoresponse of the brush was observed. A new term, δ, has been defined to quantitively describe synergistic or antagonistic behaviour. This study determined the specific ion effects imparted by salting-out ions are dependent on available solvent molecules, whereas the influence of salting-in ions is dependent on the interactions of the anions and polymer chains.

Ionic hydrogen bond effects on polyelectrolyte brushes beyond the hydronium and hydroxide ions

Herein, we have demonstrated that the properties of both strong and weak polyelectrolyte brushes including hydration, stiffness, conformation, and wettability can be tuned by the hydrogen bonding between the bound counterions and the grafted chains beyond the hydronium and hydroxide ions. This will greatly extend the application of ionic hydrogen bond effects in polymer systems.