Co-nonsolvency in concentrated aqueous solutions of PNIPAM: effect of methanol on the collective and the chain dynamics

Dynamic Behavior of Poly(N-isopropylmethacrylamide) in Neat Water and in Water/Methanol Mixtures

We investigate the collective dynamics of thermoresponsive polymer poly(N-isopropylmethacrylamide) (PNIPMAM) in aqueous solution and in water/methanol mixtures in the one-phase region. In neat water, the polymer concentration c is varied in a wide range around the overlap concentration c*, that is estimated at 23 g L-1. Using dynamic light scattering (DLS), two decays ("modes") are consistently observed in the intensity autocorrelation functions for c = 2-150 g L-1 with relaxation rates which are proportional to the square of the momentum transfer. Below c*, these are attributed to the diffusion of single chains and to clusters from PNIPMAM that are formed due to hydrophobic interactions. Above c*, they are assigned to the diffusion of the chain segments between overlap points and to long-range concentration fluctuations. From the temperature-dependent behavior of the overall scattering intensities and the dynamic correlation lengths of the fast mode, the critical temperatures and the scaling exponents are determined. The latter are significantly lower than the static values predicted by mean-field theory, which may be related to the presence of the large-scale inhomogeneities. The effect of the cosolvent methanol on the dynamics is investigated for polymer solutions having c = 30 g L-1 and methanol volume fractions in the solvent mixtures of up to 60 vol %. The phase diagram was established by differential scanning calorimetry. The slow mode detected by DLS becomes significantly weaker as methanol is added, i.e., the solutions become more homogeneous. Beyond the minimum of the coexistence line, which is located at 40-50 vol % of methanol, the dynamics is qualitatively different from the one at lower methanol contents. Thus, going from the water-rich to the methanol-rich side of the miscibility gap, the change of interaction of the PNIPMAM chains with the two solvents has a severe effect on the collective dynamics.

Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media

Sets of the nonionic polymers poly(N-vinyl isobutyramide) (pNVIBAm) and poly(N-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from about 20,000 to 150,000 kg mol−1, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(N-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and N,N-dimethylformamide.

Graphical Abstract

Cononsolvency of the responsive polymer poly(N-isopropylacrylamide) in water/methanol mixtures: a dynamic light scattering study of the effect of pressure on the collective dynamics

The collective dynamics of 25 wt% poly(N-isopropylacrylamide) (PNIPAM) solutions in water or an 80:20 v/v water/methanol mixture are investigated in the one-phase region in dependence on pressure and temperature using dynamic light scattering. Throughout, two dynamic modes are observed, the fast one corresponding to the relaxation of the chain segments within the polymer blobs and the slow one to the relaxation of the blobs. A pressure scan in the one-phase region on an aqueous solution at 34.0 °C, i.e., slightly below the maximum of the coexistence line, reveals that the dynamic correlation length of the fast mode increases when the left and the right branch of the coexistence line are approached. Thus, the chains are rather swollen far away from the coexistence line, but contracted near the phase transition. Temperature scans of solutions in neat H2O or in H2O/CD3OD at 0.1, 130, and 200 MPa reveal that the dynamic correlation length of the fast mode shows critical behavior. However, the critical exponents are significantly larger than the value predicted by mean-field theory for the static correlation length, ν = 0.5, and the exponent is significantly larger for the solution in the H2O/CD3OD mixture than in neat H2O.

Poly(sulfobetaine)-Based Diblock Copolymer Thin Films in Water/Acetone Atmosphere: Modulation of Water Hydration and Co-nonsolvency-Triggered Film Contraction

The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied via spectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H₂O or D₂O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H₂O or D₂O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H₂O is stronger than for D₂O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H₂O/acetone-d6 and D₂O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, whereas the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior.

Cononsolvency of thermoresponsive polymers: where we are now and where we are going

Cononsolvency is an intriguing phenomenon where a polymer collapses in a mixture of good solvents. This cosolvent-induced modulation of the polymer solubility has been observed in solutions of several polymers and biomacromolecules, and finds application in areas such as hydrogel actuators, drug delivery, compound detection and catalysis. In the past decade, there has been a renewed interest in understanding the molecular mechanisms which drive cononsolvency with a predominant emphasis on its connection to the preferential adsorption of the cosolvent. Significant efforts have also been made to understand cononsolvency in complex systems such as micelles, block copolymers and thin films. In this review, we will discuss some of the recent developments from the experimental, simulation and theoretical fronts, and provide an outlook on the problems and challenges which are yet to be addressed.

An injectable thermosensitive hydrogel with self-assembled peptide coupled with antimicrobial peptide for enhanced wound healing

Wound dressing based on thermosensitive hydrogel shows advantages over performed traditional dressings such as rapid reversible sol-gel-sol transition property and the capacity of filling the irregular wound area. Herein, RA-Amps...

Multi-responsive PNIPAM-PEGDA hydrogel composite

Hydrogels are widely used in applications such as soft robots and flexible sensors due to their sensitivity to environmental stimuli. It is highly demanded to develop multiple-responsive hydrogel structures. In this work, we employ the 3D printing technique to fabricate a PNIPAM-PEGDA hydrogel bilayer that can change shape through controlling the temperature, solvent mixture and magnetic field. The PNIPAM gel is a typical thermo-responsive gel, showing a decrease in swelling ratio with increasing temperature. Meanwhile, the PNIPAM gels also exhibit the cononsolvency effect in ethanol-water mixtures with a smaller swelling ratio in the mixture compared with that in each pure solvent. In comparison, the swelling ratio of PEGDA gels is insensitive to changes in both the temperature and solvent composition. Thus, the bilayer structure of PNIPAM-PEGDA can bend in different directions and with different angles with changing the temperature and solvent composition. Finally, Fe₃O₄ nanoparticles are incorporated into the matrix of PEGDA gels, endowing the whole structure with deformation and motion in response to an external magnetic field.