Conformal sulfidation of HKUST-1 for constructing porous Cu2S/CuO octahedrons realizing highly sensitive non-enzymatic glucose detection

Metal-organic frameworks (MOFs) are believed to be promising precursors for constructing novel and efficient catalysts for glucose sensing. Herein, HKUST-1 precursors are first fabricated using a one-pot hydrothermal approach, and then HKUST-1 is converted into porous Cu2S/CuO octahedrons through conformal sulfidation with the help of OH-ions. The as-obtained Cu2S/CuO composite can provide rich electrochemical active sites and promoted electric transfer kinetics. Benefiting from these combined merits, the as-fabricated Cu2S/CuO composite is confirmed to be a high-performance catalyst, with high sensitivities of 8269.45 and 4140.82μA mM-1cm-2in the corresponding ranges of 0.05 ∼ 0.6 mM and 0.6 ∼ 1.2 mM, respectively. Moreover, the as-prepared electrode materials possess good anti-interference ability, reproducibility and long-term stability. This work opens up new avenues for the design and preparation of transition metal sulfide composites.

Nickel foam-loaded Co-MOF@TiO2/MoS2 as electrode materials for dual-function devices for glucose detection and hydrogen evolution

Dual-functional nanomaterial electrodes have the capability to satisfy the requirements for both sweat analysis and the hydrogen evolution reaction (HER), thereby enabling the integration of electrochemical sensing and hydrogen production. In this study, ZIF-67 cubes are synthesized on nickel foam (NF), while TiO2 is obtained through an annealing process. Subsequently, the ZIF-67@TiO2/MoS2 nanocomposite is fabricated on nickel foam via a hydrothermal method. This composite material exhibits exceptional photocatalytic properties and is also suitable for the detection of glucose in sweat. The glucose detection range spans from 10 nM to 10 mM with a sensitivity of 7.24 μA mM-1 cm-2 for a signal-to-noise ratio of 3 and a detection limit of 0.43 μM. Moreover, when utilized as a hydrogen evolution electrode, this material demonstrates a current density of 10 mA cm-2 at an overpotential of 118 mV, with a Tafel slope of 73 mV/dec. The synthesis process is both straightforward and economical. This research introduces a novel concept for the design of multifunctional chemical sensors.

Sensitive determination of thiram in apple samples using a ZIF-67 modified Si/Au@Ag composite as a SERS substrate

Substrate materials with high sensitivity and storage stability are crucial for the practical analytical application of surface-enhanced Raman scattering (SERS) techniques. In this work, a SERS-active substrate (Si/Au@Ag/ZIF-67) was fabricated with a metal-organic framework (ZIF-67) on a plasmonic surface (Si/Au@Ag) via self-assembly. The as-prepared material combined the properties of the abundant hotspots of the Au@Ag nanoparticles and the excellent adsorption performance of ZIF-67 for organic molecules. The synergy leads to high sensitivity of the composite substrate with a low detection limit for 4-aminothiophenol (a typical Raman reporter molecule) down to 2.0 × 10-9 M and the analytical enhancement factor (AEF) of the SERS substrate is 3.4 × 106. Moreover, the substrates exhibited good repeatability, high reproducibility, and reliable stability due to the MOF coating. The SERS signal was stable after 60 days of storage at room temperature. Ultimately, the optimal Si/Au@Ag/ZIF-67 was applied as a SERS sensor to analyze thiram, and the results showed a linear concentration range from 10-7 to 10-5 M with good linearity (R2 = 0.9934). The recoveries of thiram in spiked apple juice were in the range of 95.7-102.3%, with relative standard deviations less than 4.3%. These results predict that the proposed SERS substrates may hold great potential for the detection of environmental and food pollution in practical applications.

Recent Progress in MOF-Based Electrochemical Sensors for Non-Enzymatic Glucose Detection

In recent years, substantial advancements have been made in the development of enzyme-free glucose sensors utilizing pristine metal-organic frameworks (MOFs) and their combinations. This paper provides a comprehensive exploration of various MOF-based glucose sensors, encompassing monometallic MOF sensors as well as multi-metal MOF combinations. These approaches demonstrate improved glucose detection capabilities, facilitated by the augmented surface area and availability of active sites within the MOF structures. Furthermore, the paper delves into the application of MOF complexes and derivatives in enzyme-free glucose sensing. Derivatives incorporating carbon or metal components, such as carbon cloth synthesis, rGO-MOF composites, and core-shell structures incorporating noble metals, exhibit enhanced electrochemical performance. Additionally, the integration of MOFs with foams or biomolecules, such as porphyrins, enhances the electrocatalytic properties for glucose detection. Finally, this paper concludes with an outlook on the future development prospects of enzyme-free glucose MOF sensors.

Recent advancements in metal-organic frameworks composites based electrochemical (bio)sensors

Metal-organic frameworks (MOFs) are a novel class of crystalline materials which find widespread applications in the field of microporous conductors, catalysis, separation, biomedical engineering, and electrochemical sensing. With a specific emphasis on the MOF composites for electrochemical sensor applications, this review summarizes the recent construction strategies on the development of conductive MOF composites (post-synthetic modification of MOFs, in situ synthesis of functional materials@MOFs composites, and incorporating electroactive ligands). The developed composites are revealed to have excellent electrochemical sensing activity better than their pristine forms. Notably, the applicable functionalized MOFs to electrochemical sensing/biosensing of various target species are discussed. Finally, we highlight the perspectives and challenges in the field of electrochemical sensors and biosensors for potential directions of future development.

Co/CoO nanoparticles armored by N-doped nanoporous carbon polyhedrons towards glucose oxidation in high-performance non-enzymatic sensors

The Co/CoO nanoparticles armored by porous N-doped carbon polyhedrons were successfully prepared from ZIF-67 via a pyrolysis-reorganization method, demonstrating excellent sensing performance towards glucose oxidation.

Zn/Cu Complexes Constructed through Selective in Situ Br−Cl Exchange: Synthesis, Structures, Properties, and DFT Insights into the Cu-Catalyzed Mechanism

Two coordination polymers (CPs) [Cu2(L1)(µ3-OH)(H2O)]n (1) and {[Zn4(L)2(4,4′-bipy)3]•4H2O}n (2) were synthesized under solvothermal conditions. It is unexpectedly found the transformation of aryl−Br to aryl−Cl (Br-Cl exchange) in the formation of...

A ratiometric electrochemical biosensor for glycated albumin detection based on enhanced nanozyme catalysis of cuprous oxide-modified reduced graphene oxide nanocomposites

Nanozymes have enzyme-like characteristics and nanozyme-based electrochemical sensors have been widely studied for biomarker detection. In this work, cuprous oxide-modified reduced graphene oxide (Cu₂O-rGO) nanozyme was prepared by simultaneous reduction of copper chloride and graphene oxide. This Cu₂O-rGO nanozyme displayed an outstanding electrocatalytic activity to glucose oxidation and was used as the modified material of a glassy carbon electrode to fabricate an electrochemical ratiometric biosensor for glycated albumin (GA) detection. In this ratiometric biosensor, methylene blue-labeled DNA tripods (MB-tDNA) were adsorbed on the Cu₂O-rGO/GCE surface to form a bioinspired electrode (MB-tDNA/Cu₂O-rGO/GCE), in which the catalytic sites of Cu₂O-rGO were covered by MB-tDNA. In the presence of target GA, GA could be identified by the aptamer sequence contained in MB-tDNA, and a MB-tDNA/GA complex was formed and released into the solution, so the reduced current of MB-tDNA was decreased. Simultaneously, the oxidized current of the outer added glucose was increased since more catalytic sites of Cu₂O-rGO nanozyme on the substrate electrode surface were exposed. The ratio of the peak currents of glucose oxidation and methylene blue reduction (I_Glu/I_MB) was used to monitor the GA level and ultimately improve the accuracy of the method. The electrochemical sensor showed a low detection limit of 0.007 μg mL^-1 and a wide linear range from 0.02 to 1500 μg mL^-1. The proposed sensor was also successfully used to measure the GA expression level in the blood serum of a diabetic mouse model.

Multiple Strategies to Fabricate a Highly Stable 2D CuIICuI-Organic Framework with High Proton Conductivity

Using multifunctional organic ligands with multiple acidic groups (carboxylate and sulfonate groups) to synthesize metal-organic frameworks (MOFs) bearing effective H-bond networks is a promising strategy to obtain highly proton conductive materials. In this work, a highly stable two-dimensional MOF, [Cu^II₅Cu^I₂(μ₃-OH)₄(H₂O)₆(L)₂(H₂L)₂]·3H₂O (denoted as YCu161; H₃L = 6-sulfonaphthalene-1,4-dicarboxylic acid) containing mixed-valence [Cu^II₅Cu^I₂(μ₃-OH)₄]⁸⁺ subunits, was successfully prepared. It exhibited excellent stability and temperature- and humidity-dependent proton conduction properties. Its optimal proton conductivity reached 1.84 × 10^-3 S cm^-1 at 90 °C and 98% relative humidity. On the basis of a crystal structure analysis, water vapor adsorption test results, and activation energy calculations, we deduced the proton conduction pathway and mechanism. Apparently, uncoordinated sulfonic and carboxyl groups and a network of abundant H-bonds inside the framework were responsible for the efficient proton transfer. Therefore, the strategy of selecting suitable bifunctional ligands to construct two-dimensional Cu-cluster-based MOFs with excellent proton conductivity is feasible.

One-pot facile synthesis of enzyme-encapsulated Zn/Co-infinite coordination polymer nanospheres as a biocatalytic cascade platform for colorimetric monitoring of bacteria viability

A rapid method for colorimetric monitoring of bacterial viability is described. The colorimetric method was carried out based on glucose oxidase-encapsulated Zn/Co-infinite coordination polymer (Zn/Co-ICP@GOx), which was prepared in aqueous solution free of toxic organic solvents at room temperature. The Zn/Co-ICP@GOx was confirmed to be a robust sphere structure with an average diameter of 147.53 ± 20.40 nm. It integrated the catalytic activity of natural enzyme (GOx) and mimetic peroxidase (Co (П)) all in one, efficiently acting as a biocatalytic cascade platform for glucose catalytic reaction. Exhibiting good multi-enzyme catalytic activity, stability, and selectivity, Zn/Co-ICP@GOx can be used for colorimetric glucose detection. The linear range was 0.01-1.0 mmol/L, and the limit of detection (LOD) was 0.005 mmol/L. As the glucose metabolism is a common expression of bacteria, the remaining glucose can indirectly represent the bacterial viability. Hence, a Zn/Co-ICP@GOx-based colorimetric method was developed for monitoring of bacterial viability. The color was intuitively observed with the naked eye, and the bacterial viability was accurately quantified by measurement of the absorbance at 510 nm. The method was applied to determination of bacterial viability in water and milk samples with recoveries of 99.0-103% and RSD of 0.43-7.5%. The method was rapid (less than 40 min) and applicable to different bacterial species irrespective of Gram-positive and Gram-negative bacteria, providing a universal and promising strategy for real-time monitoring of bacterial viability.

Non-Enzymatic Glucose Sensors Involving Copper: An Electrochemical Perspective

Non-enzymatic glucose sensors based on the use of copper and its oxides have emerged as promising candidates to replace enzymatic glucose sensors owing to their stability, ease of fabrication, and superior sensitivity. This review explains the theories of the mechanism of glucose oxidation on copper transition metal electrodes. It also presents an overview on the development of among the best non-enzymatic copper-based glucose sensors in the past 10 years. A brief description of methods, interesting findings, and important performance parameters are provided to inspire the reader and researcher to create new improvements in sensor design. Finally, several important considerations that pertain to the nano-structuring of the electrode surface is provided.

Graphite Carbon Nitride and Its Composites for Medicine and Health Applications

With the progress of science and technology and the improvement of people's living standards, the performance of traditional materials can no longer fully meet the needs of social development. Graphitic phase carbon nitride (g-C₃ N₄ ), as a new type of nanomaterial, has good properties. Its unique graphite like structure and stable thermodynamic characteristics have led an increasing number of researchers to explore its diverse functions and use this as a basis to develop related energy and products for applications in various fields. Among them, applications in the field of medicine health have become popular in recent years. Therefore, this review summarizes the synthesis methods of g-C₃ N₄ and its composites, as well as their applications in food, medicine, environmental monitoring and disease treatment, in the hope of providing references and basis for further expanding the applications of g-C₃ N₄ in large health areas.

Green fabrication of Cu/rGO decorated SWCNT buckypaper as a flexible electrode for glucose detection

As a paper-like membrane composed of single-walled carbon nanotube (SWCNT), buckypaper possesses high conductivity, ideal flexibility, large surface area, great thermal/chemical stability and biocompatibility, which has manifested its potential as an alternative support material. However, due to the lack of defects, high quality SWCNT synthesized by arc-discharge method is difficult to be modified with metal nanoparticles for electro-catalysis. In this paper, a novel green strategy has been developed to fabricate SWCNT buckypaper decorated with Cu/reduced graphene oxide (Cu/rGO-BP) for the first time, in which graphene oxide functions as the intermediate between SWCNT and Cu nanoparticles. The fabricated Cu/rGO-BP was applied as a flexible electrode for electrochemical glucose detection. The electrode exhibited excellent electro-catalytic activity for glucose oxidation. The sensor based on Cu/rGO-BP performed a high upper limit of linear range (25 mM), which is close to commercial glucose sensors. The proposed strategy for Cu/rGO-BP fabrication can be extended to modify buckypaper with other metal or metal oxide nanoparticles, and thus opens an innovative route to potential practical applications of flexible buckypaper in wearable bioelectronics.

A Non-enzymatic Electrochemical Sensor for Glucose Detection Based on Ag@TiO2@ Metal-Organic Framework (ZIF-67) Nanocomposite

This work presents the preparation of an efficient and sensitive glucose sensor for the detection of glucose in an alkaline media. The glucose sensor is composed of a metal organic framework (MOF) composite comprising Ag@TiO₂ nanoparticles. The hybrid of Ag@TiO₂ encapsulated in ZIF-67 was synthesized by the solvothermal method and applied onto a glassy carbon electrode (GCE) for the non-enzymatic sensing of glucose. The porosity of ZIF-67 was favorable for the unhindered diffusion and entrapment of glucose and its cavities served as reaction vessels. The electrochemical behavior of Ag@TiO₂@ZIF-67 showed amplified results when compared with that of Ag@TiO₂ and ZIF-67. Cyclic tests toward the oxidation of glucose has demonstrated excellent stability of a MOF-based hybrid sensor. The sensor based on Ag@TiO₂@ZIF-67 showed high sensitivity of 0.788 μAμM⁻¹cm⁻² with a linear concentration range of 48 μM⁻¹ mM and a response time of 5 s with an excellent detection limit of 0.99 μM (S/N = 3).