A near-infrared light-triggered shape-memory polymer for long-time fluorescence imaging in deep tissues

NIR-Responsive Deployable and Self-Fitting 4D-Printed Bone Tissue Scaffold

The treatment of irregular-shaped and critical-sized bone defects poses a clinical challenge. Deployable, self-fitting tissue scaffolds that can be implanted by minimally invasive procedures are a promising solution. Toward this, we fabricated NIR-responsive and programmable polylactide-co-trimethylene carbonate (PLMC) scaffolds nanoengineered with polydopamine nanoparticles (PDA) by extrusion-based three-dimensional (3D) printing. The 3D-printed scaffolds demonstrated excellent (>99%), fast (under 30 s), and tunable shape recovery under NIR irradiation. PLMC-PDA composites demonstrated significantly higher osteogenic potential in vitro as revealed by the significantly enhanced alkaline phosphatase (ALP) secretion and mineral deposition in contrast to neat PLMC. Intraoperative deployability and in vivo bone regeneration ability of PLMC-PDA composites were demonstrated, using self-fitting scaffolds in critical-sized cranial bone defects in rabbits. The 3D-printed scaffolds were deformed into compact shapes that could self-fit into the defect shape intraoperatively under low power intensity (0.76 W cm-2) NIR. At 6 and 12 weeks postsurgical implantation, near-complete bone regeneration was observed in PLMC-PDA composites, unlike neat PLMC through microcomputed tomography (micro-CT) analysis. The potential clinical utility of the 3D-printed composites to secure complex defects was confirmed through self-fitting of the scaffolds into irregular defects in ex vivo models of rabbit tibia, mandible, and tooth models. Taken together, the composite scaffolds fabricated here offer an innovative strategy for minimally invasive deployment to fit irregular and complex tissue defects for bone tissue regeneration.

Degradable and Recyclable Hydrogels for Sustainable Bioelectronics

Hydrogel bioelectronics has been widely used in wearable sensors, electronic skin, human-machine interfaces, and implantable tissue-electrode interfaces, providing great convenience for human health, safety, and education. The generation of electronic waste from bioelectronic devices jeopardizes human health and the natural environment. The development of degradable and recyclable hydrogels is recognized as a paradigm for realizing the next generation of environmentally friendly and sustainable bioelectronics. This review first summarizes the wide range of applications for bioelectronics, including wearable and implantable devices. Then, the employment of natural and synthetic polymers in hydrogel bioelectronics is discussed in terms of degradability and recyclability. Finally, this work provides constructive thoughts and perspectives on the current challenges toward hydrogel bioelectronics, providing valuable insights and guidance for the future evolution of sustainable hydrogel bioelectronics.

Shape-recovery of implanted shape-memory devices remotely triggered via image-guided ultrasound heating

Shape-memory materials hold great potential to impart medical devices with functionalities useful during implantation, locomotion, drug delivery, and removal. However, their clinical translation is limited by a lack of non-invasive and precise methods to trigger and control the shape recovery, especially for devices implanted in deep tissues. In this study, the application of image-guided high-intensity focused ultrasound (HIFU) heating is tested. Magnetic resonance-guided HIFU triggered shape-recovery of a device made of polyurethane urea while monitoring its temperature by magnetic resonance thermometry. Deformation of the polyurethane urea in a live canine bladder (5 cm deep) is achieved with 8 seconds of ultrasound-guided HIFU with millimeter resolution energy focus. Tissue sections show no hyperthermic tissue injury. A conceptual application in ureteral stent shape-recovery reduces removal resistance. In conclusion, image-guided HIFU demonstrates deep energy penetration, safety and speed.

Multifunctional Hydrogels for the Healing of Diabetic Wounds

The healing of diabetic wounds is hindered by various factors, including bacterial infection, macrophage dysfunction, excess proinflammatory cytokines, high levels of reactive oxygen species, and sustained hypoxia. These factors collectively impede cellular behaviors and the healing process. Consequently, this review presents intelligent hydrogels equipped with multifunctional capacities, which enable them to dynamically respond to the microenvironment and accelerate wound healing in various ways, including stimuli -responsiveness, injectable self-healing, shape -memory, and conductive and real-time monitoring properties. The relationship between the multiple functions and wound healing is also discussed. Based on the microenvironment of diabetic wounds, antibacterial, anti-inflammatory, immunomodulatory, antioxidant, and pro-angiogenic strategies are combined with multifunctional hydrogels. The application of multifunctional hydrogels in the repair of diabetic wounds is systematically discussed, aiming to provide guidelines for fabricating hydrogels for diabetic wound healing and exploring the role of intelligent hydrogels in the therapeutic processes.

A photothermally triggered one-component shape memory polymer material prepared by cross-linking porphyrin-based amphiphilic copolymer self-assemblies

Photothermally triggered shape memory polymer materials are usually prepared by dispersing photothermally responsive fillers or compounds into shape memory polymer matrixes through physical blending, while the migration and non-biodegradability of the fillers limit their potential applications (e.g., in the biomedical field). Here, we synthesized a new type of porphyrin-based amphiphilic random copolymer bearing a reactive moiety of carbonyl group by co-polymerizing methyl methacrylate (MMA), butyl acrylate (BA), diacetone acrylamide (DAAM), acrylic acid (AA) and double-bonded vinyl porphyrin monomers, followed by induced self-assembly in aqueous solution to give rise to amphiphilic random copolymer nanoparticles. The nanoparticles were further crosslinked by means of adipic dihydrazide (ADH) to fabricate the photothermally triggered one-component shape memory polymer material. Compared with the most-studied multi-phase/multi-component shape memory polymer materials, the porphyrin moiety, playing the role of a photo-to-heat converter, covalently bonded into the polymer structure would certainly make it more homogeneous and more stable in principle.

Cell-Responsive Shape Memory Polymers

Recent decades have seen substantial interest in the development and application of biocompatible shape memory polymers (SMPs), a class of “smart materials” that can respond to external stimuli. Although many studies have used SMP platforms triggered by thermal or photothermal events to study cell mechanobiology, SMPs triggered by cell activity have not yet been demonstrated. In a previous work, we developed an SMP that can respond directly to enzymatic activity. Here, our goal was to build on that work by demonstrating enzymatic triggering of an SMP in response to the presence of enzyme-secreting human cells. To achieve this phenomenon, poly(ε-caprolactone) (PCL) and Pellethane were dual electrospun to form a fiber mat, where PCL acted as a shape-fixing component that is labile to lipase, an enzyme secreted by multiple cell types including HepG2 (human hepatic cancer) cells, and Pellethane acted as a shape memory component that is enzymatically stable. Cell-responsive shape memory performance and cytocompatibility were quantitatively and qualitatively analyzed by thermal analysis (thermal gravimetric analysis and differential scanning calorimetry), surface morphology analysis (scanning electron microscopy), and by incubation with HepG2 cells in the presence or absence of heparin (an anticoagulant drug present in the human liver that increases the secretion of hepatic lipase). The results characterize the shape-memory functionality of the material and demonstrate successful cell-responsive shape recovery with greater than 90% cell viability. Collectively, the results provide the first demonstration of a cytocompatible SMP responding to a trigger that is cellular in origin.

Poly(ε-Caprolactone)-Methoxypolyethylene Glycol (PCL-MPEG)-Based Micelles for Drug-Delivery: The Effect of PCL Chain Length on Blood Components, Phagocytosis, and Biodistribution

Background

The main challenge of polymeric micelles as drug delivery systems is that the actual delivery efficiency is not as high as expected, which is closely related with the interactions with the complex biological environments such as blood components, phagocytosis, and biodistribution. Herein, we expect to understand these concerns for the clinically relevant micelles that composed of methoxypolyethylene glycol (MPEG) with identical chain length And poly(ε-caprolactone) (PCL) with tunable chain length (PCLn-MPEG) (n=20, 30, and 40) wherein doxorubicin was encapsulated as a model drug.

Methods

The doxorubicin-loaded PCLn-MPEG micelles were prepared by a dialysis method and characterized by dynamic light scattering and transmission electron microscopy. The surface PEG density and chain conformation were investigated by dissipative particle dynamics simulation. The stability of the micelles was detected by nanoparticle tracking analysis. The effects of PCL chain length on the blood components, phagocytosis, and biodistribution were assayed in vitro and in vivo.

Results

The micelles exhibited spherical morphology with a diameter about 30nm. The PEG chain conformation from "mushroom-like" to "brush-like" was evident. The micelles have no remarkable effect on the red blood cells, blood coagulation, and platelet activation. Interestingly, the protein adsorption was affected and dependent on the chain conformation, with lowest adsorption for PCL30-MPEG, which also has the loWest phagocytosis. The stability of the micelles was in the order of PCL40-MPEG>PCL30-MPEG>PCL20-MPEG which was dependent on the PCL chain length. The micelles mainly accumulated in liver, with the order consistent with their stability, indicating that, besides the phagocytosis, the stability of the micelle plays an important role in biodistribution as well. The related mechanisms were proposed and discussed.

Conclusion

Manipulating the PEG/PCL ratio of the micelle is an effective approach to modulate the protein adsorption, phagocytosis, and biodistribution, which may be a prerequisite for clinical applications.

Semicrystalline polymer networks with a swelling-enhanced water-triggered two-way shape-memory effect for programmable deformation and smart actuation

A simple, effective and universal strategy is proposed to fabricate a water-triggered two-way shape-memory polymer with the highest angle reversibility of 45.2%, which can be applied as a soft gripper and water level monitor.

Materials for Smart Soft Actuator Systems

In contrast to conventional hard actuators, soft actuators offer many vivid advantages, such as improved flexibility, adaptability, and reconfigurability, which are intrinsic to living systems. These properties make them particularly promising for different applications, including soft electronics, surgery, drug delivery, artificial organs, or prosthesis. The additional degree of freedom for soft actuatoric devices can be provided through the use of intelligent materials, which are able to change their structure, macroscopic properties, and shape under the influence of external signals. The use of such intelligent materials allows a substantial reduction of a device's size, which enables a number of applications that cannot be realized by externally powered systems. This review aims to provide an overview of the properties of intelligent synthetic and living/natural materials used for the fabrication of soft robotic devices. We discuss basic physical/chemical properties of the main kinds of materials (elastomers, gels, shape memory polymers and gels, liquid crystalline elastomers, semicrystalline ferroelectric polymers, gels and hydrogels, other swelling polymers, materials with volume change during melting/crystallization, materials with tunable mechanical properties, and living and naturally derived materials), how they are related to actuation and soft robotic application, and effects of micro/macro structures on shape transformation, fabrication methods, and we highlight selected applications.

Cardiovascular Stents: A Review of Past, Current, and Emerging Devices

One of the leading causes of morbidity and mortality worldwide is coronary artery disease, a condition characterized by the narrowing of the artery due to plaque deposits. The standard of care for treating this disease is the introduction of a stent at the lesion site. This life-saving tubular device ensures vessel support, keeping the blood-flow path open so that the cardiac muscle receives its vital nutrients and oxygen supply. Several generations of stents have been iteratively developed towards improving patient outcomes and diminishing adverse side effects following the implanting procedure. Moving from bare-metal stents to drug-eluting stents, and recently reaching bioresorbable stents, this research field is under continuous development. To keep up with how stent technology has advanced in the past few decades, this paper reviews the evolution of these devices, focusing on how they can be further optimized towards creating an ideal vascular scaffold.

Aggregation-Induced Emission Fluorescent Gels: Current Trends and Future Perspectives

The development of fluorescent gels, if not the current focus, is at the center of recent efforts devoted to the invention of a new generation of gels. Fluorescent gels have numerous properties that are intrinsic to the gel structure, with additional light-emitting properties making them attractive for different applications. This review focuses on current studies associated with the development of fluorescent gels using aggregation-induced emission fluorophores (AIEgens) to ultimately suggest new directions for future research. Here, we discuss major drawbacks of the methodologies used frequently for the fabrication of fluorescent gels using traditional fluorophores compared to those using AIEgens. The fabrication strategies to develop AIE-based fluorescent gels, including physical mixing, soaking, self-assembly, noncovalent interactions, and permanent chemical reactions, are discussed thoroughly. New and recent findings on developing AIE-active gels are explained. Specifically, physically prepared AIE-based gels including supramolecular, ionic, and chemically prepared AIE-based gels are discussed. In addition, the intrinsic fluorescent properties of natural gels, known as clustering-triggered fluorescent gel, and new and recent relevant findings published in peer-reviewed journals are explained. This review also revealed the biomedical applications of AIE-based fluorescent hydrogels including drug delivery, biosensors, bioimaging, and tissue engineering. In conclusion, the current research situation and future directions are identified.

Multifunctional Thermoplastic Polyurea Based on the Synergy of Dynamic Disulfide Bonds and Hydrogen Bond Cross-Links

Integrating the self-healing property with the shape-memory effect is a strategy that extends the service lifetime of shape-memory materials. However, this strategy is inadequate to reshape and recycle through the self-healing property or liquid-state remoldability. For more types of damage, solid-state plasticity is needed as a complementary mechanism to broaden the reprocessing channels of smart materials. In this study, multifunctional thermoplastic polyureas cross-linked by urea hydrogen bonds are prepared, which possess the multipathway remodeling property. The shape transition can be triggered after heating above 65 °C. The synergistic effect of dynamic disulfide bonds and hydrogen bonds causes the thermoplastic polyureas to possess characteristics similar to those of associative covalent adaptable networks. Thus, the polyureas can repair the damage or reconfigure the shape at 75 °C in 15 min by solid-state plasticity, instead of going into a viscous flow state. Soft grippers with various shapes are prepared by integration of solid-state plasticity, and the structure and function of the grippers can be repaired. The integration of solid-state plasticity and the self-healing property broadens the paths of shape-memory polymers in recyclability and reshapability.

Salt-responsive polyampholyte-based hydrogel actuators with gradient porous structures

A polyampholyte-based hydrogel actuator with water-responsive shape deformation was fabricated, and the gradient distribution of chemical composition was proved by micro-FTIR.