Leveraging the Recent Advancements in GelMA Scaffolds for Bone Tissue Engineering: An Assessment of Challenges and Opportunities

The field of bone tissue engineering has seen significant advancements in recent years. Each year, over two million bone transplants are performed globally, and conventional treatments, such as bone grafts and metallic implants, have their limitations. Tissue engineering offers a new level of treatment, allowing for the creation of living tissue within a biomaterial framework. Recent advances in biomaterials have provided innovative approaches to rebuilding bone tissue function after damage. Among them, gelatin methacryloyl (GelMA) hydrogel is emerging as a promising biomaterial for supporting cell proliferation and tissue regeneration, and GelMA has exhibited exceptional physicochemical and biological properties, making it a viable option for clinical translation. Various methods and classes of additives have been used in the application of GelMA for bone regeneration, with the incorporation of nanofillers or other polymers enhancing its resilience and functional performance. Despite promising results, the fabrication of complex structures that mimic the bone architecture and the provision of balanced physical properties for both cell and vasculature growth and proper stiffness for load bearing remain as challenges. In terms of utilizing osteogenic additives, the priority should be on versatile components that promote angiogenesis and osteogenesis while reinforcing the structure for bone tissue engineering applications. This review focuses on recent efforts and advantages of GelMA-based composite biomaterials for bone tissue engineering, covering the literature from the last five years.

Integrating bioprinting, cell therapies and drug delivery towards in vivo regeneration of cartilage, bone and osteochondral tissue

The biological and biomechanical functions of cartilage, bone and osteochondral tissue are naturally orchestrated by a complex crosstalk between zonally dependent cells and extracellular matrix components. In fact, this crosstalk involves biomechanical signals and the release of biochemical cues that direct cell fate and regulate tissue morphogenesis and remodelling in vivo. Three-dimensional bioprinting introduced a paradigm shift in tissue engineering and regenerative medicine, since it allows to mimic native tissue anisotropy introducing compositional and architectural gradients. Moreover, the growing synergy between bioprinting and drug delivery may enable to replicate cell/extracellular matrix reciprocity and dynamics by the careful control of the spatial and temporal patterning of bioactive cues. Although significant advances have been made in this direction, unmet challenges and open research questions persist. These include, among others, the optimization of scaffold zonality and architectural features; the preservation of the bioactivity of loaded active molecules, as well as their spatio-temporal release; the in vitro scaffold maturation prior to implantation; the pros and cons of each animal model and the graft-defect mismatch; and the in vivo non-invasive monitoring of new tissue formation. This work critically reviews these aspects and reveals the state of the art of using three-dimensional bioprinting, and its synergy with drug delivery technologies, to pattern the distribution of cells and/or active molecules in cartilage, bone and osteochondral engineered tissues. Most notably, this work focuses on approaches, technologies and biomaterials that are currently under in vivo investigations, as these give important insights on scaffold performance at the implantation site and its interaction/integration with surrounding tissues.

The one-step fabrication of porous hASC-laden GelMa constructs using a handheld printing system

The fabrication of highly porous cell-loaded structures in tissue engineering applications has been a challenging issue because non-porous cell-laden struts can cause severe cell necrosis in the middle region owing to poor transport of nutrients and oxygen. In this study, we propose a versatile handheld 3D printer for the effective fabrication of porous cell-laden methacrylated gelatin (GelMa) with high porosity (≈97%) by air injection and a bubble-making system using mesh filters through which a mixture of air/GelMa bioink is passed. In particular, the pore size and foamability of the cell constructs could be manipulated using various processing parameters (rheological properties of GelMa, filter size and number, and air-bioink volume ratio). To demonstrate the feasibility of the cell construct as a tissue engineering substitute for muscle regeneration, in vitro cellular activities and in vivo regeneration ability of human adipose stem cells were assessed. The in vitro results demonstrated that the human adipose stem cells (hASCs) fabricated using the handheld 3D printer were alive and well-proliferated. Furthermore, the in vivo results showed that the hASCs-constructs directly printed from the handheld 3D printer showed significant restoration of functionality and efficient muscle regeneration in the volumetric muscle loss model of mice. Based on these results, the fabrication method of the porous cell-laden construct could be a promising tool for regenerating muscle tissues.

Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering

In this brief review, we discuss the recent advancements in using poly(ethylene glycol) diacrylate (PEGDA) hydrogels for tissue engineering applications. PEGDA hydrogels are highly attractive in biomedical and biotechnology fields due to their soft and hydrated properties that can replicate living tissues. These hydrogels can be manipulated using light, heat, and cross-linkers to achieve desirable functionalities. Unlike previous reviews that focused solely on material design and fabrication of bioactive hydrogels and their cell viability and interactions with the extracellular matrix (ECM), we compare the traditional bulk photo-crosslinking method with the latest three-dimensional (3D) printing of PEGDA hydrogels. We present detailed evidence combining the physical, chemical, bulk, and localized mechanical characteristics, including their composition, fabrication methods, experimental conditions, and reported mechanical properties of bulk and 3D printed PEGDA hydrogels. Furthermore, we highlight the current state of biomedical applications of 3D PEGDA hydrogels in tissue engineering and organ-on-chip devices over the last 20 years. Finally, we delve into the current obstacles and future possibilities in the field of engineering 3D layer-by-layer (LbL) PEGDA hydrogels for tissue engineering and organ-on-chip devices.

Integrative In Situ Photodynamic Therapy-Induced Cell Death Measurement of 3D-Bioprinted MCF-7 Tumor Spheroids

The development of new in vitro models that closely mimic the tumor microenvironment (TME) to evaluate the efficacy of anticancer drugs has received great attention. In this study, a three-dimensional (3D) bioprinted Michigan Cancer Foundation-7 (MCF-7) cancer spheroid-embedded hydrogel model was suggested for integrative in situ determination of the half-maximal inhibitory concentration (IC₅₀) values of photosensitizers (PSs). The MCF-7 cell-laden alginate/gelatin hydrogel was printed for the fabrication of tumor spheroids. The hydrogel was used to mimic the extracellular matrix (ECM) surrounding the cancer cells in the TME. The fluorescence intensities corresponding to photodynamic therapy (PDT)-induced death of tumor spheroids probed by the laser showed a random distribution in the hydrogel, regardless of the focus of the laser and the vertical-axis direction in which the laser was passed. These results enabled integrative in situ measurement of all tumor spheroids probed by the laser without needing to separate the tumor spheroids in the hydrogel and measure them individually. When compared with two-dimensional (2D) monolayer cultures, very large IC₅₀ values of the PSs, chlorin e6 (Ce6) and sulfonated tetraphenyl porphyrin (sTPP), were achieved in MCF-7 spheroid-embedded hydrogels mainly due to the drug resistance of the tumor spheroids. Additionally, the heterogenic PDT response of single MCF-7 cancer cells in a single tumor spheroid was observed through 3D imaging of irregular apoptosis in a single spheroid since single tumor spheroids showed a heterogenic PDT response. Furthermore, the laser-power-dependent IC₅₀ values of PSs were obtained using the MCF-7 spheroid-embedded hydrogel model.

Repair of segmental ulnar bone defect in juvenile caused by osteomyelitis with induced membrane combined with tissue-engineered bone: A case report with 4-year follow-up

Introduction and importance

We used induced membrane combined with tissue-engineered bone (TEB) to repair the 14-cm juvenile ulnar defect formed after osteomyelitis debridement. The TEB was completely transformed into autologous bone after 4-year follow-up.

Case presentation

A 13-year-old male was hospitalized because of right ulna chronic osteomyelitis. After focal debridement, the total length of ular defect was 14 cm. Anti-infective bone cement was filled in the bone defect area. β-Tricalcium phosphate (β-TCP) was used as TEB scaffold. Autologous iliac bone marrow stromal cells (BMSCs) were cultured in vitro and were planted on β-TCP scaffold to form TEB 3 weeks later. 47 months after implantation of TEB, the repaired ulna had continuous and smooth bone cortex, completely ossification of TEB, completely recanalization of medullary cavity. The upper limb function DASH score was 35.

Clinical discussion

Masquelet put forward the concept of “induced membrane” and applied this technique on bone defects treatment formed after debridement of osteomyelitis. β-Tricalcium phosphate (β-TCP) is artificial bone materials commonly used in clinical. In this case, the seed cells used were autologous BMSCs and the culture medium was autologous serum. Cytokines promoting cell growth and differentiation were not used.

Conclusion

The results of this case showed that TEB combined with induced membrane could repair ulna segmental bone defects as long as 14 cm in adolescents. This technique gives one alternative method to repair juvenile bone defects caused by osteomyelities of trauma. More clinical cases are needed to verify the effectiveness of this technique in the next.

•

It's the first report of using induced membrane combined with TEB to repair a 14cm bone defect caused by osteomyelities.

•

In vitro cultured autologous BMSCs implanted in β-TCP scaffold could repair segmental bone defect.

•

BMSCs were cultured with autologous serum without additional cytokines, which is safe and effective.

•

This technique gives one alternative method to treat juvenile bone defects caused by osteomyelitis or trauma.

Bioprinted hASC ‐laden collagen/ HA constructs with meringue‐like macro/micropores

Extrusion‐based bioprinting is one of the most effective methods for fabricating cell‐laden mesh structures. However, insufficient cellular activities within the printed cylindrical cell‐matrix blocks, inducing low cell‐to‐cell interactions due to the disturbance of the matrix hydrogel, remain to be addressed. Hence, various sacrificial materials or void‐forming methods have been used; however, most of them cannot solve the problem completely or require complicated fabricating procedures. Herein, we suggest a bioprinted cell‐laden collagen/hydroxyapatite (HA) construct comprising meringue‐like porous cell‐laden structures to enhance osteogenic activity. A porous bioink is generated using a culinary process, i.e., the whipping method, and the whipping conditions, such as the material concentration, time, and speed, are selected appropriately. The constructs fabricated using the meringue‐like bioink with MG63 cells and human adipose stem cells exhibit outstanding metabolic and osteogenic activities owing to the synergistic effects of the efficient cell‐to‐cell interactions and HA stimulation released from the porous structure. The in vitro cellular responses indicate that the meringue‐like collagen bioink for achieving an extremely porous cell‐laden construct can be a highly promising cell‐laden material for various tissue regeneration applications.

Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics

Polymeric hydrogels are fascinating platforms as 3D scaffolds for tissue repair and delivery systems of therapeutic molecules and cells. Among others, methacrylated gelatin (GelMA) has become a representative hydrogel formulation, finding various biomedical applications. Recent efforts on GelMA-based hydrogels have been devoted to combining them with bioactive and functional nanomaterials, aiming to provide enhanced physicochemical and biological properties to GelMA. The benefits of this approach are multiple: i) reinforcing mechanical properties, ii) modulating viscoelastic property to allow 3D printability of bio-inks, iii) rendering electrical/magnetic property to produce electro-/magneto-active hydrogels for the repair of specific tissues (e.g., muscle, nerve), iv) providing stimuli-responsiveness to actively deliver therapeutic molecules, and v) endowing therapeutic capacity in tissue repair process (e.g., antioxidant effects). The nanomaterial-combined GelMA systems have shown significantly enhanced and extraordinary behaviors in various tissues (bone, skin, cardiac, and nerve) that are rarely observable with GelMA. Here we systematically review these recent efforts in nanomaterials-combined GelMA hydrogels that are considered as next-generation multifunctional platforms for tissue therapeutics. The approaches used in GelMA can also apply to other existing polymeric hydrogel systems.

Hydrogel based tissue engineering and its future applications in personalized disease modeling and regenerative therapy

BACKGROUND

Evolution in the in vitro cell culture from conventional 2D to 3D technique has been a significant accomplishment. The 3D culture models have provided a close and better insight into the physiological study of the human body. The increasing demand for organs like liver, kidney, and pancreas for transplantation, rapid anti-cancer drug screening, and the limitations associated with the use of animal models have attracted the interest of researchers to explore 3D organ culture.

MAIN BODY

Natural, synthetic, and hybrid material-based hydrogels are being used as scaffolds in 3D culture and provide 'close-to-in vivo' structures. Organoids: the stem cell-derived small size 3D culture systems are now favored due to their ability to mimic the in-vivo conditions of organ or tissue and this characteristic has made it eligible for a variety of clinical applications, drug discovery and regenerative medicine are a few of the many areas of application. The use of animal models for clinical applications has been a long-time ethical and biological challenge to get accurate outcomes. 3D bioprinting has resolved the issue of vascularization in organoid culture to a great extent by its layer-by-layer construction approach. The 3D bioprinted organoids have a popular application in personalized disease modeling and rapid drug development and therapeutics.

SHORT CONCLUSIONS

This review paper, focuses on discussing the novel organoid culture approach, its advantages and limitations, and potential applications in a variety of life science areas namely cancer research, cell therapy, tissue engineering, and personalized medicine and drug discovery.

GRAPHICAL ABSTRACT

Electrospun Nanofibers for Bone Regeneration: From Biomimetic Composition, Structure to Function

In recent years, a variety of novel materials and processing technologies have been developed to prepare tissue engineering scaffolds for bone defect repair. Among them, nanofibers fabricated via electrospinning technology...

Three-dimensional-poly(lactic acid) scaffolds coated with gelatin/magnesium-doped nano-hydroxyapatite for bone tissue engineering

BACKGROUND

Treatment of critical-sized bone defects has progressively evolved over the years from metallic implants to more ingenious three-dimensional-based scaffolds. The use of three-dimensional scaffolds for bone regeneration from biodegradable polymers like poly(lactic acid) (PLA) is gaining popularity. Scaffolds with surface functionalization using gelatin (Gel) have the advantages of biocompatibility and cell adhesion. Nano-hydroxyapatite (nHAp) is one of the most promising implant materials utilized in orthopaedics. The osteogenic potential of the nHAp can be improved by the substitution of magnesium (Mg) ions onto the crystal lattice of nHAp. Thus, the goal of this work was to make three-dimensional-PLA scaffolds covered with Gel/Mg-nHAp for osteogenic effect.

METHODS AND RESULTS

The designed three-dimensional-PLA/Gel/Mg-nHAp scaffolds were attributed to various characterizations for the examination of their physicochemical, mechanical properties, cyto-compatibility, and biodegradability as well as their ability to promote osteogenesis in vitro. Mouse mesenchymal stem cells (mMSCs) were cytocompatible with these scaffolds. The osteogenic potential of three-dimensional-PLA/Gel/Mg-nHAp scaffolds employing mMSCs was validated at the cellular and molecular levels. The three-dimensional-PLA/Gel/Mg-nHAp scaffolds stimulated the differentiation of mMSCs towards osteoblastic lineage.

CONCLUSION

Based on these findings, we suggest that the three-dimensional-PLA/Gel/Mg-nHAp scaffolds' osteogenic capability may be advantageous in the mending of bone defects in orthopedic applications.

The Application of Polycaprolactone in Three-Dimensional Printing Scaffolds for Bone Tissue Engineering

Bone tissue engineering commonly encompasses the use of three-dimensional (3D) scaffolds to provide a suitable microenvironment for the propagation of cells to regenerate damaged tissues or organs. 3D printing technology has been extensively applied to allow direct 3D scaffolds manufacturing. Polycaprolactone (PCL) has been widely used in the fabrication of 3D scaffolds in the field of bone tissue engineering due to its advantages such as good biocompatibility, slow degradation rate, the less acidic breakdown products in comparison to other polyesters, and the potential for loadbearing applications. PCL can be blended with a variety of polymers and hydrogels to improve its properties or to introduce new PCL-based composites. This paper describes the PCL used in developing state of the art of scaffolds for bone tissue engineering. In this review, we provide an overview of the 3D printing techniques for the fabrication of PCL-based composite scaffolds and recent studies on applications in different clinical situations. For instance, PCL-based composite scaffolds were used as an implant surgical guide in dental treatment. Furthermore, future trend and potential clinical translations will be discussed.

Innovations in Craniofacial Bone and Periodontal Tissue Engineering - From Electrospinning to Converged Biofabrication

From a materials perspective, the pillars for the development of clinically translatable scaffold-based strategies for craniomaxillofacial (CMF) bone and periodontal regeneration have included electrospinning and 3D printing (biofabrication) technologies. Here, we offer a detailed analysis of the latest innovations in 3D (bio)printing strategies for CMF bone and periodontal regeneration and provide future directions envisioning the development of advanced 3D architectures for successful clinical translation. First, the principles of electrospinning applied to the generation of biodegradable scaffolds are discussed. Next, we present on extrusion-based 3D printing technologies with a focus on creating scaffolds with improved regenerative capacity. In addition, we offer a critical appraisal on 3D (bio)printing and multitechnology convergence to enable the reconstruction of CMF bones and periodontal tissues. As a future outlook, we highlight future directions associated with the utilization of complementary biomaterials and (bio)fabrication technologies for effective translation of personalized and functional scaffolds into the clinics.

Chitosan-based 3D-printed scaffolds for bone tissue engineering

Despite the spontaneous regenerative properties of autologous bone grafts, this technique remains dilatory and restricted to fractures and injuries. Conventional grafting strategies used to treat bone tissue damage have several limitations. This highlights the need for novel approaches to overcome the persisting challenges. Tissue-like constructs that can mimic natural bone structurally and functionally represent a promising strategy. Bone tissue engineering (BTE) is an approach used to develop bioengineered bone with subtle architecture. BTE utilizes biomaterials to accommodate cells and deliver signaling molecules required for bone rejuvenation. Among the various techniques available for scaffold creation, 3D-printing technology is considered to be a superior technique as it enables the design of functional scaffolds with well-defined customizable properties. Among the biomaterials obtained from natural, synthetic, or ceramic origins, naturally derived chitosan (CS) polymers are promising candidates for fabricating reliable tissue constructs. In this review, the physicochemical-biological properties and applications of CS-based 3D-printed scaffolds and their future perspectives in BTE are summarized.