Tailoring the triplet level of isomorphic Eu/Tb mixed MOFs for sensitive temperature sensing

A ratiometric luminescence thermometer based on lanthanide encapsulated complexes

Lanthanide-containing complexes have been widely developed as ratiometric luminescence thermometers, which are non-invasive, contactless and accurate. The synthesis of these Ln complexes generally requires high temperatures, multiple steps and other harsh conditions. Moreover, bimetallic lanthanide complexes, which have been reported to be better thermometers, are even more challenging to synthesize. This complexity can be simplified by preparing a host-guest complex of lanthanides. In this work, Tb or both Tb and Eu are encapsulated in an MOF host, making them emissive. The ratio of Tb/Eu was also easily tuned by simply changing their ratio in the solution, resulting in a tunable emission. Accordingly, we were able to synthesise both the emissive Tb complex and Tb/Eu complexes at different ratios using a single host. The complexes were found to be suitable as ratiometric luminescent thermometers in the temperature range of 160-380 K, with reasonably good sensitivity and uncertainty. The thermometer's sensitivity and uncertainty were significantly improved using bimetallic Tb and Eu host-guest complexes. Calculations using the host and Eu emission ratio were found to provide better thermometer parameters than the commonly reported Tb and Eu emission ratio. Thus, using a single host, we were able to synthesise different lanthanide complexes that can sense temperature, and we improved the thermometer parameters by incorporating multiple lanthanides in a single host. This research will enable the scientific community to reexamine the applicability of unexplored host-guest lanthanide complexes.

Sensitization of Europium Oxide Nanoparticles Enhances Signal-to-Noise over Autofluorescence with Time-Gated Luminescence Detection

Clinical translation of nanoparticle-based therapeutics has been limited, and a lack of preclinical delivery characterization is partly to blame, limiting our understanding of the mechanisms of failure. The improvement of the preclinical delivery assessment requires nanoparticles with higher detectability. This work focused on the exploration of several aromatic carboxylic ligands (terephthalic acid, quinaldic acid, and kynurenic acid) for the sensitization of europium oxide nanoparticles with a long emission lifetime to overcome cellular autofluorescence, a key confounder of detection in luminescence-based bioimaging. A facile one-pot synthesis and ligand exchange process generated and sensitized ultrasmall Eu2O3 cores. As reflected in the emission spectra and lifetimes, ligand binding yielded unique coordination environments around Eu3+. Then, the efficacy of sensitization was tested against the autofluorescence provided by tissue lysate. Normal (simultaneous excite-read) measurements showed integrated signal improvements over autofluorescence of 2.2-, 3.9-, and 14.0-fold for EuTA, EuQA, and EuKA, respectively. In time-gated mode, the improvements over autofluorescence were more dramatic with fold differences of 75-, 89-, and 108-fold for EuTA, EuQA, and EuKA, respectively. The investigation of novel sensitizers expands the breadth of the field of sensitized lanthanide oxide nanoparticles, and the signal enhancement observed with sensitization and time-gating supports the utility of the generated samples for future bioimaging applications.

Plasmon enhanced luminescence of Tb/Eu co-doped film by Au NRs-PVA nanocomposite film

Plasmonic nanostructures have great potential for improving the radiation properties of emitters. Here, the plasmonic Au nanorods-PVA nanocomposite films are used to uniformly improve the photoluminescence of Tb/Eu co-doped PMMA film within the local micro-region. Under the excitation of 292 nm, the maximum enhancement factor is 37.2-fold for emission at 612 nm and 21.6-fold for emission at 545 nm. Moreover, the finite different time domain simulations are developed to further explain the experimental results. It is indicated that the modulation of luminescence can be attributed to the increase of the local density of optical states through the Purcell effect and the improvement of the energy transfer efficiency between Tb and Eu. Under the excitation of 360 nm, the maximum enhancement factor is about 71.5-fold. In this case, the Au nanorods are mainly used for modulating the emission process at 612 nm, which deduced a greater enhancement factor at 612 nm. This study provides a deep understanding of the interactions between rare earth ions co-doped materials and plasmonic nanostructures, building a bridge to fabricate a useful platform for several applications, such as thin film-based detectors and sensors.

A Doped Lanthanide-Based Coordination Polymer Exhibiting High Relative Sensitivity to Ratiometric Luminescent Thermometers at 440 K

Ratiometric luminescent thermometers with excellent performance often require the luminescent materials to possess high thermal stability and relative sensitivity (Sr). However, such luminescent materials are very rare, especially in physiological (298-323 K) and high-temperature (>373 K) regions. Here we report the synthesis and luminescent property of [Tb0.995Eu0.005(pfbz)2(phen)Cl] (3), which not only exhibits high Sr in physiological temperature but also has a Sr up to 7.47% K-1 at 440 K, the largest Sr at 440 K in known lanthanide-based coordination compound luminescent materials.

Visual ratiometric fluorescence sensing of L-lactate in sweat by Eu-MOF and the design of logic devices

Using 1, 4-H₂NDC as ligand and Eu as the center metal, the lanthanide MOF Eu-NDC was synthesized by hydrothermal method. The material showed a fast ratiometric response to L-lactate, and the fluorescence of the material varied from red to blue with the growth of lactate concentration, which can be used as a fluorescent sensor for L-lactate in sweat. The sensor exhibited good fluorescence stability to interfering components in human sweat and good detection limits for lactate in artificial sweat. Based on this, a visualized molecular logic gate that can monitor sweat lactate levels was constructed, and the material's characteristic of showing different colors with lactate concentration changes was used to indicate possible hypoxia during exercise, opening a new path for combining sweat lactate monitoring with smart molecular devices.

Eu3+ functionalized metal-organic framework for selective monitoring of emerging environmental pollutants non-steroidal anti-inflammatory drugs

Non-steroidal anti-inflammatory drugs (NSAIDs), as a new water pollutant emerging in recent years, has potential hazards to the environment. The difficult degradation characteristics of NSAIDs lead to long-term accumulation in the natural environment, which will inevitably cause incalculable damage to human health. In this work, for practical application considerations, MIL-53(Al) type MOF [Al(OH)(TDC)]‧1.5H₂O‧0.7DMF (MIL-53-TDC, TDC = 2,5-thiophene dicarboxylic acid) with good water stability is selected as the sensing main body. The ligand TDC was chosen for two reasons: one is as an antenna ligand, which can sensitize Eu³⁺ ions to emit characteristic fluorescence; the other is as binding site that the sulfur atoms on the thiophene ring can introduce Eu³⁺ ions through coordination. Thus, Eu³⁺ functionalized MIL-53-TDC hybrid materials (Eu@MIL-53-TDC) were developed as a fluorescence sensor for the detection of two kinds of NSAIDs, S-ibuprofen (S-IBP) and diclofenac (DCF). The concentration range of S-IBP and DCF detected by the prepared sensors is 0.001-0.07 mM (LOD = 0.5 μM) and 0.0005-0.1 mM (LOD = 0.2 μM), respectively. Moreover, this sensor not only can achieve rapid (3 min) and sensitive analysis of these two NSAIDs but also has a satisfactory recovery for the detection of S-IBP and DCF in serum and tap water.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines

A europium(III) metal-organic framework (MOF), namely, {[[(CH₃)₂NH₂]₃Eu₂(DTTP-2OH)₂(HCOO)(H₂O)]·4H₂O}_n (Eu-MOF, H₄DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H₂O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10^-4 S cm^-1) at room temperature with a maximum conductivity of 1.91 × 10^-3 S cm^-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 μM for tetracycline, 0.13 μM for oxytetracycline and 0.11 μM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Terbium-based metal-organic frameworks through energy transfer modulation for visual logical sensing zinc and fluorine ions

Zinc is the second most abundant trace element in the human central nervous system, which is closely related to various physiological activities in the human body. Fluoride ion is one of the most harmful elements in drinking water. Excessive intake of F^- may cause dental fluorosis, renal failure, or DNA damage. Therefore, it is urgent to develop sensors with high sensitivity and selectivity for the detection of Zn²⁺ and F^- ions at the same time. In this work, a series of mixed lanthanide metal-organic frameworks (Ln-MOFs) probes are synthesized using a simple method of in situ doping. The luminous color can be finely modulated by changing the molar ratio of Tb³⁺ and Eu³⁺ during synthesis. Benefiting from the unique energy transfer modulation mechanism, the probe has the continuous detection capability of zinc ions and fluoride ions. The detection of Zn²⁺ and F^- in a real environment shows that the probe has a good practical application prospect. The as-designed sensor at 262 nm excitation can sequentially detect Zn²⁺ concentrations ranging from 10^-8 to 10^-3 M (LOD = 4.2 nM) and F^- levels ranging from 10^-5 to 10^-3 M (LOD = 3.6 μM) with high selectivity. Based on different output signals, a simple Boolean logic gate device is constructed to realize intelligent visualization of Zn²⁺ and F^- monitoring.

Engineering of metal-organic frameworks (MOFs) for thermometry

Metal-organic frameworks (MOFs ) are excellent candidates for use in chemistry, material sciences and engineering thanks to their interesting qualitative features and potential applications. Quite interestingly, the luminescence of MOFs can be engineered by regulation of the ligand design, metal ion selection and encapsulation of guest molecules within the MOF cavity. Temperature is a very crucial physical parameter and the market share of temperature sensors is rapidly expanding with technology and medicinal advancement. Among the wide variety of available temperature sensors, recently MOFs have emerged as potential temperature sensors with the capacity to precisely measure the temperature. Lanthanide-based thermometry has advantages because of its ratiometric response ability, high quantum yield and photostability, and therefore lanthanide-based MOFs were initially focused on to construct MOF thermometers. As science and technology have gradually changed, it has been observed that with the inclusion of dye, quantum dots, etc. within the MOF cavity, it is possible to develop MOF-based thermometry. This review consolidates the recent advances of MOF-based ratiometric thermometers and their mechanism of energy transfer for determining the temperature (thermal sensitivity and temperature uncertainty). In addition, some fundamental points are also discussed, such as concepts for guiding the design of MOF ratiometric thermometers, thermometric performance and tuning the properties of MOF thermometers.

Dye-Encapsulated Metal-Organic Frameworks for the Multi-Parameter Detection of Temperature

Temperature is an important physical parameter and plays a significant role in scientific research, the detection of which cannot be too crucial to study. In order to reduce the interference of the external environment on the detection of temperature and improve the accuracy of the detection results, a multi-parameter detection method using several optical signals was proposed. Here, a novel porous metal-organic framework (MOF), Zn-CYMPN, was synthesized and structurally characterized. Then, fluorescent organic dyes, either DPEE or DPEM, were encapsulated into the pores of Zn-CYMPN independently. The successful synthesis of the composites Zn-CYMPN⊃DPEE or Zn-CYMPN⊃DPEM could easily introduce other fluorescent centers into the original material and made it more convenient to realize multi-parameter temperature detection. More specifically, when the temperature changed, the maximum fluorescent emission wavelength (W) and the maximum optical intensity (I) of the Zn-CYMPN⊃DPEE/DPEM both showed good linear responses with temperature over a wide range, indicating that the composites were highly sensitive thermometers with multi-parameter temperature readouts. In addition, the quantum efficiency and thermal stability of the organic dyes, which bother every researcher, were improved as well.

Highly Sensitive Adsorption and Detection of Iodide in Aqueous Solution by a Post-Synthesized Zirconium-Organic Framework

Effective methods of detection and removal of iodide ions (I^-) from radioactive wastewater are urgently needed and developing them remains a great challenge. In this work, an Ag⁺ decorated stable nano-MOF UiO-66-(COOH)₂ was developed for the I^- to simultaneously capture and sense in aqueous solution. Due to the uncoordinated carboxylate groups on the UiO-66-(COOH)₂ framework, Ag⁺ was successfully incorporated into the MOF and enhanced the intrinsic fluorescence of MOF. After adding iodide ions, Ag⁺ would be produced, following the formation of AgI. As a result, Ag⁺@UiO-66-(COOH)₂ can be utilized for the removal of I^- in aqueous solution, even in the presence of other common ionic ions (NO₂^-, NO₃^-, F^-, SO₄^2-). The removal capacity as high as 235.5 mg/g was calculated by Langmuir model; moreover, the fluorescence of Ag⁺@UiO-66-(COOH)₂ gradually decreases with the deposition of AgI, which can be quantitatively depicted by a linear equation. The limit of detection toward I^- is calculated to be 0.58 ppm.

Three isostructural hexanuclear lanthanide-organic frameworks for sensitive luminescence temperature sensing over a wide range

Temperature sensing plays essential roles in both fundamental research and high-tech applications. In this work, three isomorphic hexanuclear lanthanide metal-organic frameworks (Ln-MOFs), Ln(BPDC-xN) (Ln = Eu³⁺/Tb³⁺, x = 0, 1, 2) were prepared based on the cluster-based synthesis strategy with three structurally similar dicarboxylate ligands 4,4'-biphenyldicarboxylic acid (H₂BPDC-0N), 6-(4-carboxyphenyl)nicotinic acid (H₂BPDC-1N), and [2,2'-bipyridine]-5,5'-dicarboxylic acid (H₂BPDC-2N) as the organic linkers. The as-synthesized Ln-MOFs were fully characterized using single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), elemental analysis (EA), and Fourier transform infrared spectra (FT-IR). Using a Eu³⁺/Tb³⁺ co-doping approach, Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) were identified as potential ratiometric luminescence thermometers. Since there are two suitable distances between the energy donors and acceptors within the framework for efficient energy transfer, all Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) maintain high relative sensitivity over a wide temperature range from 50 K to 300 K.

Water-Stable Eu6-Cluster-Based fcu-MOF with Exposed Vinyl Groups for Ratiometric and Fluorescent Visual Sensing of Hydrogen Sulfide

Detection of H₂S in the biological system has attracted enormous attention in recent years. In this work, a new vinyl-functionalized metal-organic framework (MOF), [(Me₂NH₂)₂] [Eu₆(μ₃-OH)₈(BDC-CH═CH₂)₆(H₂O)₆] (Eu-BDC-CH═CH₂, BDC-CH═CH₂ = 2-vinylterephthalic acid), was synthesized under solvothermal conditions. The vinyl groups in the ligands can not only modulate the "antenna effect" of the ligand on Eu³⁺ ions but also serve as an exposed reactive site to allow for the quantitative detection of H₂S by Eu-BDC-CH═CH₂. The ratiometric fluorescent probe has the advantages of water stability, acid-base stability (pH = 2-11), fast response (<2 min), high selectivity, and sensitivity (LOD = 38.4 μM). We also used Eu-BDC-CH═CH₂ to detect and analyze H₂S in tap and lake waters, demonstrating the potential of the probe for biological and environmental applications. In addition, the MOF-based agarose hydrogel film allows for the visual detection of H₂S via a smartphone by identifying the RGB values. The vinyl-functionalized MOF can thus be a powerful sensing platform for H₂S.

Recent progress on porous MOFs for process-efficient hydrocarbon separation, luminescent sensing, and information encryption

Metal-organic frameworks (MOFs), as an emerging class of porous materials, excel in designability, regulatability, and modifiability in terms of their composition, topology, pore size, and surface chemistry, thus affording a huge potential for addressing environment and energy-related challenges. In particular, MOFs can be applied as porous adsorbents for the purification of industrially important hydrocarbons through certain process-efficient separation schemes based on selectivity-reversed adsorption and multicomponent separation. Moreover, the vast combination possibilities and controllable and engineerable luminescent units of MOFs make them a versatile platform to develop functionally tailored materials for luminescent sensing and optical data encryption. In this feature article, we summarize the recent progress in the use of porous MOFs for the separation and purification of acetylene (C₂H₂) and ethylene (C₂H₄) based on selectivity-reversed adsorption and multicomponent separation strategies. Moreover, we highlight the advances over the past three years in the field of MOF-based luminescent materials for thermometry, turn-on sensing, and information encryption.

Modulating fluorescence sensing properties of excited-state intramolecular proton transfer (ESIPT)-based metal organic frameworks (MOFs) by metal polarization

MIL-53-Al/Ga/In fluorescent probes are constructed by adjusting the influence of metal centers on the ESIPT process in MOFs and experimental results indicate that the weaker the metal polarization, the stronger the sensor sensitivity.

2-Dimensional rare earth metal–organic frameworks based on a hexanuclear secondary building unit as efficient detectors for vapours of nitroaromatics and volatile organic compounds

A new family of microporous 2-dimensional rare earth metal organic frameworks based on a hexanuclear secondary building unit with capability to selectively detect vapours of volatile organic compounds and nitroaromatic explosives is reported.

Dual-functional ratiometric fluorescent sensor based on mixed-lanthanide metal-organic frameworks for detection of trace water and temperature

The rapid-response ratiometric sensors are promising materials to detect trace water and temperature. However, the accurately visualized water assay in very narrow-range still remains a challenge. Herein, a novel dual-functional...

Enhancement of the fluorescence properties via introducing the tetraphenylethylene chromophores into a novel Mn-organic framework with a rare [Mn4(μ3-OH)2] cluster

By employing a tetraphenylethylene (TPE)-based tetracarboxylate linker, tetrakis(4-carboxyphenyl)ethylene (H₄TCPE), we herein constructed a novel luminescent Mn-MOF based on a rare [Mn₄(μ₃-OH)₂] cluster (SQNU-55). Interestingly, the TPE-based SQNU-55 not only provides a good material for the blue LED device, but also has a better luminescent molecular thermometer for low-temperature detection.

Dual-Functional Metal-Organic Framework for Luminescent Detection of Carcinoid Biomarkers and High Proton Conduction

It remains a challenge to exploit dual-functional metal-organic frameworks (MOFs) for applications, including luminescence detection and proton conduction. With the deliberate selection of the bifunctional organic ligand 5-sulfoisophthalic acid monosodium salt (NaH₂bts), and the phosphonic acid ligand N,N'-piperazine (bismethylenephosphonic acid; H₄L), a robust three-dimensional (3D) noninterpenetrating dual-functional MOF, [Tb(H₂L)(H₂bts)(H₂O)]·H₂O (1), has been synthesized hydrothermally. On the basis of the excellent thermal and chemical as well as superior luminescence stabilities in water and solutions with different pHs, 1 can serve as the simple, rapid, and highly selective and sensitive luminescence detection of the carcinoid biomarkers 5-hydroxytryptamine (HT) and its metabolite 5-hydroxyindole-3-acetic acid (HIAA) with detection limits of nanomolar magnitude in water and in simulated blood plasma and urine systems. Due to the change in the signals that could be readily differentiated by the naked eye under a UV lamp, a portable test paper has been developed. The probable quenching mechanisms are discussed in detail. In addition, a great number of hydrogen-bonding networks are formed among the uncoordinated carboxylic oxygen atoms, sulfonate oxygen atoms, protonated nitrogen atoms, and water molecules, which provide potential proton-hopping sites for proton conduction, leading to a maximum proton conductivity of 2.3 × 10^-4 S cm^-1 at 368 K and 95% relative humidity. The above results suggest that rationally designed dual-functional MOFs can open an avenue for the development of occupational diagnostic tools and alternative energy technology.