A dipodal bimane-ditriazole-diCu(II) complex serves as an ultrasensitive water sensor

Hydrogen-Bond-Regulated Tb3+-Centered Emission in a ZnII-TbIII Heterometallic Compound for Water Sensing in Ethanol and Gasoline

Luminescent lanthanide compounds stand out for their distinctive characteristics including narrow emission bands, substantial Stokes shifts, high quantum yields, and unique luminescent colors. However, Ln3+ is highly susceptible to vibrational quenching from X-H (X = O/N) high-energy oscillators in the embedded organic antenna, resulting in significant nonradiative energy dissipation of the 5D excited states of Ln3+. Herein, we introduce a strategy based on supramolecular interactions to modulate the nonradiative transitions in a new ZnII-TbIII heterometallic compound, [ZnTb(HL)2(NO3)Cl2]·2CH3CN·H2O (ZnTb), based on a phenyl-substituted pyrazolinone-modified salicylamide-imide ligand (H2L). The regulation mechanisms are explored in detail both experimentally and theoretically. With the N,N'-dimethylformamide (DMF)-boosted Tb3+ luminescence, ZnTb⊃DMF (1 mg of ZnTb + 2 mL of DMF) realizes a rapid (3s) and sensitive detection of water in DMF with a detection limit of 0.021%. Further, ZnTb⊃DMF can detect trace amounts of water in ethanol and ethanol gasoline with a low detection limit of 0.023% and 0.048%. In addition, portable paper strips of ZnTb⊃DMF are prepared to improve its practicability, which can afford real-time and faster (1 s) in situ visual sensing of trace amounts of water in common organic solvents and ethanol gasoline with sensitivity comparable to the titration results. This study provides a new idea for the lanthanide luminescence modulation and application in the field of fluorescence sensing.

Ultrasensitive and versatile hydrogen peroxide sensing via fluorescence quenching

Reported herein is an ultra-sensitive turn-off fluorescence sensor for hydrogen peroxide based on its reaction with bimane 1. This reaction is highly efficient, resulting in a detection limit of 7.9 pM. It also maintains sensor efficacy when adsorbed on paper and enables both solution-state and vapor-phase detection.

Advances on fluorescence chemosensors for selective detection of water

Water, although an important part of everyday life, is acts as one of the most significant contaminants in various applications such as biomedical monitoring, chemical production, petroleum-based fuel and food processing. In fact, the presence of water in other solvents is a huge concern. For the quantification of trace water content, different methods such as Karl-Fischer, electrochemical, nuclear magnetic resonance, chromatography, and thermogravimetric analysis have been used. Although every technique has its own benefit, each one suffers from several drawbacks that include high detection costs, lengthy procedures and specialized operations. Nowadays, the development of fluorescence-based chemical probes has become an exciting area of research for the quick and accurate estimation of water content in organic solvents. A variety of chemical processes such as hydrolysis reaction, metal ions promoted oxidation reaction, suppression of the -C═N isomerization, protonation and deprotonation reactions, and molecular aggregation have been well researched in the last few years for the fluorescent detection of trace water. These chemical processes eventually lead to different photophysical events such as aggregation-induced emission (AIE), aggregation-induced emission enhancement (AIEE), aggregation-caused quenching (ACQ), fluorescent resonance energy transfer (FRET), charge transfer, photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT) that are responsible for the detection. This review presents a summary of the fluorescence-based chemosensors reported in recent years. The design of water sensors, sensing mechanisms and their potential applications are reviewed and discussed.

A Copper-Selective Sensor and Its Inhibition of Copper-Amyloid Beta Aggregation

Copper is an essential trace metal for biological processes in humans and animals. A low level of copper detection at physiological pH using fluorescent probes is very important for in vitro applications, such as the detection of copper in water or urine, and in vivo applications, such as tracking the dynamic copper concentrations inside cells. Copper homeostasis is disrupted in neurological diseases like Alzheimer's disease, and copper forms aggregates with amyloid beta (Ab42) peptide, resulting in senile plaques in Alzheimer's brains. Therefore, a selective copper detector probe that can detect amyloid beta peptide-copper aggregates and decrease the aggregate size has potential uses in medicine. We have developed a series of Cu2+-selective low fluorescent to high fluorescent tri and tetradentate dentate ligands and conjugated them with a peptide ligand to amyloid-beta binding peptide to increase the solubility of the compounds and make the resultant compounds bind to Cu2+-amyloid aggregates. The copper selective compounds were developed using chemical scaffolds known to have high affinity and selectivity for Cu2+, and their conjugates with peptides were tested for affinity and selectivity towards Cu2+. The test results were used to inform further improvement of the next compound. The final Cu2+ chelator-peptide conjugate we developed showed high selectivity for Cu2+ and high fluorescence properties. The compound bound 1:1 to Cu2+ ion, as determined from its Job's plot. Fluorescence of the ligand could be detected at nanomolar concentrations. The effect of this ligand on controlling Cu2+-Ab42 aggregation was studied using fluorescence assays and microscopy. It was found that the Cu2+-chelator-peptide conjugate efficiently reduced aggregate size and, therefore, acted as an inhibitor of Ab42-Cu2+ aggregation. Since high micromolar concentrations of Cu2+ are present in senile plaques, and Cu2+ accelerates the formation of toxic soluble aggregates of Ab42, which are precursors of insoluble plaques, the developed hybrid molecule can potentially serve as a therapeutic for Alzheimer's disease.

Highly tunable bimane-based fluorescent probes: design, synthesis, and application as a selective amyloid binding dye

Small molecule fluorescent probes are indispensable tools for a broad range of biological applications. Despite many probes being available, there is still a need for probes where photophysical properties and biological selectivity can be tuned as desired. Here, we report the rational design and synthesis of a palette of fluorescent probes based on the underexplored bimane scaffold. The newly developed probes with varied electronic properties show tunable absorption and emission in the visible region with large Stokes shifts. Probes featuring electron-donating groups exhibit rotor effects that are sensitive to polarity and viscosity by "intramolecular charge transfer" (ICT) and twisted intramolecular charge transfer (TICT) mechanisms, respectively. These properties enable their application as "turn-on" fluorescent probes to detect fibrillar aggregates of the α-synuclein (αS) protein that are a hallmark of Parkinson's disease (PD). One probe shows selective binding to αS fibrils relative to soluble proteins in cell lysates and amyloid fibrils of tau and amyloid-β. Finally, we demonstrate the diagnostic potential of the probe in selectively detecting αS fibrils amplified from PD with dementia (PDD) patient samples.

Shining light on fluoride detection: a comprehensive study exploring the potential of coumarin precursors as selective turn-on fluorescent chemosensors

In this study, we report a fluoride chemosensor based on the use of a non-fluorescent pre-coumarin, compound 1. This compound undergoes selective fluoride-triggered formation of coumarin 2, with a concomitant turn-on fluorescence signal. Although compound 1 exists as a mixture of alkene isomers (2 : 1 in favor of the E isomer), only the minor Z-isomer undergoes cyclization. Nonetheless, comprehensive computational and experimental studies provide evidence that in situ isomerization of E-1 to Z-1, followed by fluoride-triggered phenolate evolution and intramolecular cyclization, facilitates the generation of coumarin 2 in high yield. Moreover, this system is an effective turn-on fluorescence sensor for fluoride anions, which displays outstanding selectivity (limited response to other commonly occurring analytes), sensitivity (lowest reported limits of detection for this sensor class), and practicality (works in solution and on paper to generate both fluorometric and colorimetric responses). Ongoing efforts are focused on expanding this paradigm to other pre-coumarin scaffolds, which also undergo analyte-specific coumarin formation accompanied by turn-on fluorescence.

Thioxobimanes

Dioxobimanes, colloquially known as bimanes, are a well-established family of N-heterobicyclic compounds that share a characteristic core structure, 1,5-diazabicyclo[3.3.0]octadienedione, bearing two endocyclic carbonyl groups. By sequentially thionating these carbonyls in the syn and anti isomers of the known (Me,Me)dioxobimane, we were able to synthesize a series of thioxobimanes, representing the first heavy-chalcogenide bimane variants. These new compounds were extensively characterized spectroscopically and crystallographically, and their aromaticity was probed computationally. Their potential role as ligands for transition metals was demonstrated by synthesizing a representative gold(I)-thioxobimane complex.

Amine-incorporated quinoxaline based fluorescent sensor for detection of trace water: Solvent influenced self-assembly

Polarity is a complex parameter, with important effect in chemistry and biology. In recent years, polarity exploration attracted more and more attention hence, it's of great importance to exploit new methods for polarity determination. A novel class of long, coplanar, and amine incorporated electron-rich quinoxaline scaffold(L₁) furnished maximum solvatochromic effect and large Stokes shift and was chosen to determine water content in organic solvents e.g. acetonitrile, THF, DMF, and methanol through fluorescence spectroscopy. Moreover, the probe was found to perform as an effective fluorescent sensor for the quantitative detection of low-level moisture content in four commonly-used organic solvents with low detection limits (0.018%, 0.027%, 0.012%, and 0.43% respectively). This study also describes the morphological transformation of L₁ form a fibrous network to spherical aggregates upon increasing water content in several organic solvents. Real-life implementation of the probe was successfully employed for the detection of moisture content in commercial food products and building materials such as cement, sand, limestone, salt, wheat, and detergent powder. Furthermore, probe L₁-immersed easy-to-prepare test strips provide a reliable approach for qualitative monitoring of water content in organic solvents by a simple color-changing method under UV irradiation via smartphone-assisted RGB analysis.

Pyrene – N-phenylparaphenylene diamine-Based Imine Conjugate for the Detection of Trace Amounts of Water in Organic Solvents: Real-Time Application in Honey Samples

A one-step condensation procedure in the presence of green solvent EtOH was used to make a pyrene-based fluorescent sensor (PNPD). It could be used as a rapid, low-cost, selective, and...