PEGDA hydrogel microspheres with encapsulated salt for versatile control of protein crystallization

Due to their biocompatibility and adjustable chemical structure and morphology, hydrogels have great potential in many applications, and can be used to enhance protein crystal quality and crystallization efficiency, contributing to biomedicine manufacturing. Monodispersed PEGDA hydrogel microspheres (HMSs) were synthesized using a Lego-inspired microfluidic device. The generated droplets were then UV polymerized, partially hydrolyzed with 0.1 M NaOH solution to improve their absorption capacity, and soaked in a buffer solution containing 0, 0.5, 1, 2, and 4 M NaCl. Salt-loaded HMSs were used as the medium for the enhanced crystallization of hen egg white lysozyme from aqueous solutions. Different supersaturations were achieved in the protein solutions by releasing NaCl of different concentrations from HMSs, as confirmed by electrical conductivity measurements. HMSs with or without NaCl can both provide heterogeneous nucleation sites due to their nano-porous structure and wrinkled surface. The addition of NaCl-loaded HMSs to the protein solution can also increase or decrease the supersaturation in the whole solution or locally near the HMS, leading to controllable nucleation time and crystal size distribution dependent on the NaCl concentration loaded into HMSs.

Controlling bead and cell mobility in a recirculating hanging-drop network

Integrating flowing cells, such as immune cells or circulating tumour cells, within a microphysiological system is crucial for body-on-a-chip applications. However, ensuring unimpeded recirculation of cells is a significant challenge. Closed microfluidic devices have a no-slip boundary condition along channel walls and a defined chip geometry (laminar flow) that hinders the ability to freely control cell flow. Open microfluidic devices, where the bottom device boundary is an air-liquid interface (ALI), e.g., hanging drop networks (HDNs), offer the advantage of an easily-actuatable fluid-phase geometry, where cells can either flow or stagnate. In this paper, we optimized a hanging-drop-integrated pneumatic-pump system for closed-loop recirculation of particles (i.e., beads or cells). Experiments with both beads and cells in cell culture medium initially resulted in particle stagnation, which was suggestive of a pseudo-no-slip boundary condition at the ALI. Transmission electron microscopy and dynamic light scattering measurements of the ALI suggested that aggregation of submicron-scale cell-culture-medium components is the cause of the pseudo-no-slip boundary condition. We used the finite element method to study the forces on particles at the ALI and to optimize HDN design (drop aperture) and operation (drop height) parameters. Based on this analysis, we report a phase diagram delineating the conditions for free flow or stagnation of particles at the ALI of hanging drops. Using our experimental setup with 3.5 mm drop apertures, we conducted particle flow experiments while actuating drop heights. We confirmed the ability to control the flow or stagnation of particles by actuating the height of hanging drops: a drop height over 300 μm led to particle stagnation and a drop height under 300 μm allowed for particle flow. This particle-flow control, combined with the ease of integrating scaffold-free organ models (microtissues or organoids) in HDNs, constitutes the basis for an experimental setup enabling the control of the residence time of single cells around 3D organ models.

Protein Nucleation and Crystallization Process with Process Analytical Technologies in a Batch Crystallizer

Protein crystallization has drawn great attention to replacing the traditional downstream processing for protein-based pharmaceuticals due to its advantages in stability, storage, and delivery. Limited understanding of the protein crystallization processes requires essential information based on real-time tracking during the crystallization process. A batch crystallizer of 100 mL fitted with a focused beam reflectance measurement (FBRM) probe and a thermocouple was designed for in situ monitoring of the protein crystallization process, with simutaneously record of off-line concentrations and crystal images. Three stages in the protein batch crystallization process were identified: long-period slow nucleation, rapid crystallization, and slow growth and breakage. The induction time was estimated by FBRM, i.e., increasing numbers of particles in the solution, which could be half of the time required for detecting the decrease of the concentration, by offline measurement. The induction time decreased with an increase in supersaturation within the same salt concentration. The interfacial energy for nucleation was analyzed based on each experimental group with equal salt concentration and different concentrations of lysozyme. The interfacial energy reduced with an increase in salt concentration in the solution. The yield of the experiments was significantly affected by the protein and salt concentrations and could achieve up to 99% yield with a 26.5 μm median crystal size upon stabilized concentration readings.

Polymer-mediated and ultrasound-assisted crystallization of ropivacaine: Crystal growth and morphology modulation

The objective of this research was to modify the crystal shape and size of poorly water-soluble drug ropivacaine, and to reveal the effects of polymeric additive and ultrasound on crystal nucleation and growth. Ropivacaine often grow as needle-like crystals extended along the a-axis and the shape was hardly controllable by altering solvent types and operating conditions for the crystallization process. We found that ropivacaine crystallized as block-like crystals when polyvinylpyrrolidone (PVP) was used. The control over crystal morphology by the additive was related to crystallization temperature, solute concentration, additive concentration, and molecular weight. SEM and AFM analyses were performed providing insights into crystal growth pattern and cavities on the surface induced by the polymeric additive. In ultrasound-assisted crystallization, the impacts of ultrasonic time, ultrasonic power, and additive concentration were investigated. The particles precipitated at extended ultrasonic time exhibited plate-like crystals with shorter aspect ratio. Combined use of polymeric additive and ultrasound led to rice-shaped crystals, which the average particle size was further decreased. The induction time measurement and single crystal growth experiments were carried out. The results suggested that PVP worked as strong nucleation and growth inhibitor. Molecular dynamics simulation was performed to explore the action mechanism of the polymer. The interaction energies between PVP and crystal faces were calculated, and mobility of the additive with different chain length in crystal-solution system was evaluated by mean square displacement. Based on the study, a possible mechanism for the morphological evolution of ropivacaine crystals assisted by PVP and ultrasound was proposed.

Growing and making nano- and microcrystals

Thanks to recent technological advances in X-ray and micro-electron diffraction and solid-state NMR, structural information can be obtained by using much smaller crystals. Thus, microcrystals have become a valuable commodity rather than a mere stepping stone toward obtaining macroscopic crystals. Microcrystals are particularly useful for structure determination using serial data collection approaches at synchrotrons and X-ray free-electron lasers. The latter's enormous peak brilliance and short X-ray pulse duration mean that structural information can be obtained before the effects of radiation damage are seen; these properties also facilitate time-resolved crystallography. To establish defined reaction initiation conditions, microcrystals with a desired and narrow size distribution are critical. Here, we describe milling and seeding techniques as well as filtration approaches for the reproducible and size-adjustable preparation of homogeneous nano- and microcrystals. Nanocrystals and crystal seeds can be obtained by milling using zirconium beads and the BeadBug homogenizer; fragmentation of large crystals yields micro- or nanocrystals by flowing crystals through stainless steel filters by using an HPLC pump. The approaches can be scaled to generate micro- to milliliter quantities of microcrystals, starting from macroscopic crystals. The procedure typically takes 3-5 d, including the time required to grow the microcrystals.