Probability and kinetics of rupture and electrofusion in giant unilamellar vesicles under various frequencies of direct current pulses

Irreversible electroporation induces permanent permeabilization of lipid membranes of vesicles, resulting in vesicle rupture upon the application of a pulsed electric field. Electrofusion is a phenomenon wherein neighboring vesicles can be induced to fuse by exposing them to a pulsed electric field. We focus how the frequency of direct current (DC) pulses of electric field impacts rupture and electrofusion in cell-sized giant unilamellar vesicles (GUVs) prepared in a physiological buffer. The average time, probability, and kinetics of rupture and electrofusion in GUVs have been explored at frequency 500, 800, 1050, and 1250 Hz. The average time of rupture of many 'single GUVs' decreases with the increase in frequency, whereas electrofusion shows the opposite trend. At 500 Hz, the rupture probability stands at 0.45 ± 0.02, while the electrofusion probability is 0.71 ± 0.01. However, at 1250 Hz, the rupture probability increases to 0.69 ± 0.03, whereas the electrofusion probability decreases to 0.46 ± 0.03. Furthermore, when considering kinetics, at 500 Hz, the rate constant of rupture is (0.8 ± 0.1)×10-2 s-1, and the rate constant of fusion is (2.4 ± 0.1)×10-2 s-1. In contrast, at 1250 Hz, the rate constant of rupture is (2.3 ± 0.8)×10-2 s-1, and the rate constant of electrofusion is (1.0 ± 0.1)×10-2 s-1. These results are discussed by considering the electrical model of the lipid bilayer and the energy barrier of a prepore.

Processes and mechanisms underlying burst of giant unilamellar vesicles induced by antimicrobial peptides and compounds

To clarify the damage of lipid bilayer region in bacterial cell membrane caused by antimicrobial peptides (AMPs) and antimicrobial compounds (AMCs), their interactions with giant unilamellar vesicles (GUVs) of various lipid compositions have been examined. The findings revealed two main causes for the leakage: nanopore formation in the membrane and burst of GUVs. Although GUV burst has been explained previously based on the carpet model, the supporting evidence is limited. In this review, to better clarify the mechanism of GUV burst by AMPs, AMCs, and other membrane-active peptides, we described current knowledge of the conditions, characteristics, and detailed processes of GUV burst and the changes in the shape of the GUVs during burst. We identified several physical factors that affect GUV burst, such as membrane tension, electrostatic interaction, structural changes of GUV membrane such as membrane folding, and oil in the membrane. We also clarified one of the physical mechanisms underlying the instability of lipid bilayers that are associated with leakage in the carpet model. Based on these results, we propose a mechanism underlying some types of GUV burst induced by these substances: the growth of a nanopore to a micropore, resulting in GUV burst.

Effect of Phosphatidylethanolamine on Pore Formation Induced by the Antimicrobial Peptide PGLa

Most antimicrobial peptides (AMPs) induce pore formation and a burst of lipid bilayers and plasma membranes. This causes severe leakage of the internal contents and cell death. The AMP PGLa forms nanopores in giant unilamellar vesicles (GUVs) comprising dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylglycerol (DOPG). We here elucidated the effect of the line tension of a prepore rim on PGLa-induced nanopore formation by investigating the interaction of PGLa with single GUVs comprising dioleoylphosphatidylethanolamine (DOPE)/DOPG (6:4) in buffer using the single GUV method. We found that PGLa forms nanopores in the GUV membrane, which evolved into a local burst and burst of GUVs. The rate of pore formation in DOPE/DOPG-GUVs was smaller than that in DOPC/DOPG-GUVs. PGLa is located only in the outer leaflet of a GUV bilayer just before a fluorescent probe AF647 leakage from the inside, indicating that this asymmetric distribution induces nanopore formation. PGLa-induced local burst and burst of GUVs were observed at 10 ms-time resolution. After nanopore formation started, dense particles and small vesicles appeared in the GUVs, followed by a decrease in the GUV diameter. The GUV was finally converted into smaller GUV or lipid membrane aggregates. We discuss the mechanisms of PGLa-induced nanopore formation and its direct evolution to a GUV burst.

Determination of pore edge tension from the kinetics of rupture of giant unilamellar vesicles using the Arrhenius equation: effects of sugar concentration, surface charge and cholesterol

The pore edge tension (Γ) of a membrane closely intertwines with membrane stability and plays a vital role in the mechanisms that facilitate membrane resealing following pore formation caused by electrical and mechanical tensions. We have explored a straightforward procedure to determine Γ by fitting the inverse of the tension-dependent logarithm of the rate constant of rupture of giant unilamellar vesicles (GUVs) using the Arrhenius equation. The GUVs were prepared using a combination of 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) and 1, 2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) in a physiological environment. The effects of sugar concentration, membrane surface charge density, and membrane cholesterol concentration on Γ have been investigated. The values of Γ increase with sugar concentration in the physiological buffer, measuring 9.6 ± 0.3, 10.4 ± 0.1, and 16.2 ± 0.1 pN for 40, 100, and 300 mM, respectively. A higher concentration of anionic lipids (70 mol% of DOPG) significantly reduces Γ. An increasing trend of Γ with cholesterol content was observed; specifically, the values of Γ were 11.9 ± 0.9, 13.9 ± 0.7, and 16.2 ± 0.4 pN for 15, 29, and 40 mol% cholesterol, respectively. Thus, the presence of higher anionic lipids in the bilayer led to a decrease in membrane stability. In contrast, the presence of higher sugar concentrations in the buffer and increased cholesterol concentration in the membranes enhanced membrane stability.

Effect of membrane tension on antimicrobial peptide PGLa-induced pore formation in lipid bilayers

The osmotic pressure (Π) method has recently been developed to quantitatively examine the effect of membrane tension (σ) on pore formation in giant unilamellar vesicles (GUVs) induced by antimicrobial peptides (AMPs). Here, we used the Π method to reveal the effect of σ on the interaction of an AMP, PGLa, with lipid bilayers comprising dioleoylphosphatidylglycerol (DOPG) and dioleoylphosphatidylcholine (DOPC) (4/6). PGLa induced leakage of fluorescent probes from single GUVs under Π, indicating nanopore formation. Membrane tension did not transform a PGLa-induced nanopore into a micropore nor cause GUV burst up to 3.4 mN/m, which is in contrast with the effect of σ on another AMP, magainin 2-induced pore formation, where lower σ resulted in GUV burst. The fraction of leaking GUVs at a specific time increased with increasing σ, indicating that the rate of PGLa-induced pore formation increases with increasing σ. The rate of transfer of fluorescent probe-labeled PGLa across the lipid bilayer without pore formation also increased with increasing σ. PGLa-induced pore formation requires a symmetric distribution of peptides in both leaflets of the GUV bilayer, and thus we infer that the increase in the rate of PGLa transfer from the outer leaflet to the inner leaflet underlies the increase in the rate of pore formation with increasing σ. On the basis of these results, we discuss the difference between the effect of σ on nanopore formation in GUV membranes induced by PGLa and that by magainin 2.

ATP-independent assembly machinery of bacterial outer membranes: BAM complex structure and function set the stage for next-generation therapeutics

Diderm bacteria employ β-barrel outer membrane proteins (OMPs) as their first line of communication with their environment. These OMPs are assembled efficiently in the asymmetric outer membrane by the β-Barrel Assembly Machinery (BAM). The multi-subunit BAM complex comprises the transmembrane OMP BamA as its functional subunit, with associated lipoproteins (e.g., BamB/C/D/E/F, RmpM) varying across phyla and performing different regulatory roles. The ability of BAM complex to recognize and fold OM β-barrels of diverse sizes, and reproducibly execute their membrane insertion, is independent of electrochemical energy. Recent atomic structures, which captured BAM-substrate complexes, show the assembly function of BamA can be tailored, with different substrate types exhibiting different folding mechanisms. Here, we highlight common and unique features of its interactome. We discuss how this conserved protein complex has evolved the ability to effectively achieve the directed assembly of diverse OMPs of wide-ranging sizes (8-36 β-stranded monomers). Additionally, we discuss how darobactin-the first natural membrane protein inhibitor of Gram-negative bacteria identified in over five decades-selectively targets and specifically inhibits BamA. We conclude by deliberating how a detailed deduction of BAM complex-associated regulation of OMP biogenesis and OM remodeling will open avenues for the identification and development of effective next-generation therapeutics against Gram-negative pathogens.

Estimation of negative membrane tension in lipid bilayers and its effect on antimicrobial peptide magainin 2-induced pore formation

Positive membrane tension in the stretched plasma membrane of cells and in the stretched lipid bilayer of vesicles has been well analyzed quantitatively, whereas there is limited quantitative information on negative membrane tension in compressed plasma membranes and lipid bilayers. Here, we examined negative membrane tension quantitatively. First, we developed a theory to describe negative membrane tension by analyzing the free energy of lipid bilayers to obtain a theoretical equation for negative membrane tension. This allowed us to obtain an equation describing the negative membrane tension (σosm) for giant unilamellar vesicles (GUVs) in hypertonic solutions due to negative osmotic pressure (Π). Then, we experimentally estimated the negative membrane tension for GUVs in hypertonic solutions by measuring the rate constant (kr) of rupture of the GUVs induced by the constant tension (σex) due to an external force as a function of σex. We found that larger σex values were required to induce the rupture of GUVs under negative Π compared with GUVs in isotonic solution and quantitatively determined the negative membrane tension induced by Π (σosm) by the difference between these σex values. At small negative Π, the experimental values of negative σosm agree with their theoretical values within experimental error, but as negative Π increases, the deviation increases. Negative tension increased the stability of GUVs because higher tensions were required for GUV rupture, and the rate constant of antimicrobial peptide magainin 2-induced pore formation decreased.

A review on the measurement of the bending rigidity of lipid membranes

This review provides an overview of the latest developments in both experimental and simulation techniques used to assess the bending rigidity of lipid membranes. It places special emphasis on experimental methods that utilize model vesicles to manipulate lipid compositions and other experimental parameters to determine the bending rigidity of the membrane. It also describes two commonly used simulation methods for estimating bending rigidity. The impact of various factors on membrane bending rigidity is summarized, including cholesterol, lipids, salt concentration, surface charge, membrane phase state, peptides, proteins, and polyethylene glycol. These factors are shown to influence the bending rigidity, contributing to a better understanding of the biophysical properties of membranes and their role in biological processes. Furthermore, the review discusses future directions and potential advancements in this research field, highlighting areas where further investigation is required.

Effects of membrane potentials on the electroporation of giant unilamellar vesicles

Living organisms maintain a resting membrane potential, which plays an important role in various biophysical and biological processes. In the context of medical applications, irreversible electroporation (IRE) is a non-thermal and minimally invasive technique that utilizes precisely controlled electric field pulses of micro- to millisecond durations to effectively ablate cancer and tumor cells. Previous studies on IRE-induced rupture of cell-mimetic giant unilamellar vesicles (GUVs) have primarily been conducted in the absence of membrane potentials. In this study, we investigated the electroporation of GUVs, including parameters such as the rate constant of rupture and the probability of rupture, in the presence of various negative membrane potentials. The membranes of GUVs were prepared using lipids and channel forming proteins. As the membrane potential increased from 0 to -90 mV, the rate constant of rupture showed a significant increase from (7.5 ± 1.6)×10-3 to (35.6 ± 5.5)×10-3 s-1. The corresponding probability of rupture also exhibited a notable increase from 0.40 ± 0.05 to 0.68 ± 0.05. To estimate the pore edge tension, the electric tension-dependent logarithm of the rate constant was fitted with the Arrhenius equation for different membrane potentials. The presence of membrane potential did not lead to any significant changes in the pore edge tension. The increase in electroporation is reasonably explained by the decrease in the prepore free energy barrier. The choice of buffer used in GUVs can significantly influence the kinetics of electroporation. This study provides valuable insights that can contribute to the application of electroporation techniques in the biomedical field.

Effects of polyethylene glycol-grafted phospholipid on the anionic magnetite nanoparticles-induced deformation and poration in giant lipid vesicles

The hydrophilic polymer polyethylene glycol-grafted phospholipid has been used extensively in the study of artificial vesicles, nanomedicine, and antimicrobial peptides/proteins. In this research, the effects of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N- [methoxy (polyethylene glycol)-2000] (abbreviated PEG-DOPE) on the deformation and poration of giant unilamellar vesicles (GUVs)-induced by anionic magnetite nanoparticles (NPs) have been investigated. For this, the size of the NPs used was 18 nm, and their concentration in the physiological solution was 2.00 μg/mL. GUVs were prepared using the natural swelling method comprising 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and PEG-DOPE. The mole% of PEG-DOPE in the membranes were 0, 2, and 5%. The degree of deformation of the GUVs was quantified by the parameter compactness (Com), which is 1.0 for the spherical-shaped GUVs. The value of Com increases with time during the interactions of NPs with GUVs for any concentration of PEG-DOPE, but the rate of increase is significantly influenced by the PEG-DOPE concentration in the membranes. The average compactness increases with the increase of PEG-DOPE%, and after 60 min of NPs interaction, the values of average compactness for 0, 2, and 5% PEG-DOPE were 1.19 ± 0.02, 1.26 ± 0.03 and 1.35 ± 0.05, respectively. The fraction of deformation (Frd) also increased with the increase of PEG-DOPE%, and at 60 min, the values of Frd for 0 and 5% PEG-DOPE were 0.47 ± 0.02 and 0.63 ± 0.02, respectively. The fraction of poration (Frp) increased with the increase of PEG-DOPE, and at 60 min, the values of Frp for 0 and 5% PEG-DOPE were 0.25 ± 0.02 and 0.48 ± 0.02, respectively. Hence, the presence of PEG-grafted phospholipid in the membranes greatly enhances the anionic magnetite NPs-induced deformation and poration of giant vesicles.

Antimicrobial peptide magainin 2-induced rupture of single giant unilamellar vesicles comprising E. coli polar lipids

Most antimicrobial peptides (AMPs) damage the cell membrane of bacterial cells and induce rapid leakage of the internal cell contents, which is a main cause of their bactericidal activity. One of the AMPs, magainin 2 (Mag), forms nanopores in giant unilamellar vesicles (GUVs) comprising phosphatidylcholine (PC) and phosphatidylglycerol (PG), inducing leakage of fluorescent probes. In this study, to elucidate the Mag-induced pore formation in lipid bilayer region in E. coli cell membrane, we examined the interaction of Mag with single GUVs comprising E. coli polar lipids (E. coli-lipid-GUVs). First, we investigated the Mag-induced leakage of a fluorescent probe AF488 from single E. coli-lipid-GUVs, and found that Mag caused rupture of GUVs, inducing rapid AF488 leakage. The rate constant of Mag-induced GUV rupture increased with the Mag concentration. Using fluorescence microscopy with a time resolution of 5 ms, we revealed the GUV rupture process: first, a small micropore was observed in the GUV membrane, then the pore radius increased within 50 ms without changing the GUV diameter, the thickness of the membrane at the pore rim concomitantly increased, and eventually membrane aggregates were formed. Mag bound to only the outer monolayer of the GUV before GUV rupture, which increased the area of the GUV bilayer. We also examined the physical properties of E. coli-lipid-GUVs themselves. We found that the rate constant of the constant tension-induced rupture of E. coli-lipid-GUVs was higher than that of PG/PC-GUVs. Based on these results, we discussed the Mag-induced rupture of E. coli-lipid-GUVs and its mechanism.

Effect of monolayer spontaneous curvature on constant tension-induced pore formation in lipid bilayers

The methodology of constant tension-induced rupture of giant unilamellar vesicles (GUVs) has provided information on tension-induced pore formation. This method was used to investigate the effect of spontaneous curvature (H₀) for a lipid monolayer on the rate constant (k_r) for constant tension (σ)-induced rupture, which originates from pore formation in lipid bilayers. Lipids were incorporated with different H₀ values into GUV membranes to change the overall H₀ value for the GUV monolayer. The dioleoylphosphatidylglycerol (DOPG)/dioleoylphosphatidylethanolamine (DOPE) (4/6, molar ratio, here and elsewhere) monolayer has a negative H₀, whereas the DOPG/dioleoylphosphatidylcholine (DOPC) (4/6) monolayer has an essentially zero H₀. A higher tension was required to induce the rupture of DOPG/DOPE (4/6)-GUVs compared with DOPG/DOPC (4/6)-GUVs. The line tension (Γ) for a pre-pore in DOPG/DOPE (4/6)-GUVs, determined by the analysis of the tension dependence of k_r, was 1.5 times larger than that in DOPG/DOPC (4/6)-GUVs. The k_r values for GUVs comprising DOPG/DOPC/18:1 lysophosphatidylcholine (LPC) (40/55/10), which has a positive H₀, were larger than those for DOPG/DOPC (4/6)-GUVs under the same tension. The Γ value for DOPG/DOPC/LPC (40/55/10)-GUVs was almost half that for DOPG/DOPC (4/6)-GUVs. These results indicate that Γ decreases with increasing H₀, which results in an increase in k_r. Based on these results, the effect of H₀ on k_r and Γ is discussed.

A Mechanism of Double-Membrane Vesicle Formation from Liquid-Ordered/Liquid-Disordered Phase Separated Spherical Membrane

Genome replication of coronaviruses takes place in specific cellular compartments, in so-called double-membrane vesicles (DMVs), formed from the endoplasmic reticulum (ER). An intensive production of DMVs is induced by non-structural viral proteins. Here, we proposed a possible mechanism of the DMV formation from ER-derived spherical vesicles where liquid-ordered and liquid-disordered lipid phases coexist. These vesicles are supposed to divide into two homogeneous liquid-ordered and liquid-disordered vesicles. The formation of two spherical vesicles constituting DMV requires a mechanical work to be performed. We considered the excess energy of the boundary between the coexisting lipid phases as the main driving force behind the division of the initial vesicle. Explicitly accounting for the energy of elastic deformations and the interphase boundary energy, we analyzed a range of physical parameters where the DMV formation is possible. We concluded that this process can principally take place in a very narrow range of system parameters. The most probable diameter of DMVs formed according to the proposed mechanism appeared to be approximately 220 nm, in an agreement with the average diameter of DMVs observed in vivo. Our consideration predicts the DMV size to be strongly limited from above. The developed analysis can be utilized for the production of DMVs in model systems.

Crowding-induced morphological changes in synthetic lipid vesicles determined using smFRET

Lipid vesicles are valuable mesoscale molecular confinement vessels for studying membrane mechanics and lipid-protein interactions, and they have found utility among bio-inspired technologies, including drug delivery vehicles. While vesicle morphology can be modified by changing the lipid composition and introducing fusion or pore-forming proteins and detergents, the influence of extramembrane crowding on vesicle morphology has remained under-explored owing to a lack of experimental tools capable of capturing morphological changes on the nanoscale. Here, we use biocompatible polymers to simulate molecular crowding in vitro, and through combinations of FRET spectroscopy, lifetime analysis, dynamic light scattering, and single-vesicle imaging, we characterize how crowding regulates vesicle morphology. We show that both freely diffusing and surface-tethered vesicles fluorescently tagged with the DiI and DiD FRET pair undergo compaction in response to modest concentrations of sorbitol, polyethylene glycol, and Ficoll. A striking observation is that sorbitol results in irreversible compaction, whereas the influence of high molecular weight PEG-based crowders was found to be reversible. Regulation of molecular crowding allows for precise control of the vesicle architecture in vitro, with vast implications for drug delivery and vesicle trafficking systems. Furthermore, our observations of vesicle compaction may also serve to act as a mechanosensitive readout of extramembrane crowding.

The antimicrobial peptide Magainin-2 interacts with BamA impairing folding of E. coli membrane proteins

Antimicrobial peptides (AMPs) are a unique and diverse group of molecules endowed with a broad spectrum of antibiotics properties that are being considered as new alternative therapeutic agents. Most of these peptides are membrane-active molecules, killing bacteria by membrane disruption. However, recently an increasing number of AMPs was shown to enter bacterial cells and target intracellular processes fundamental for bacterial life. In this paper we investigated the mechanism of action of Maganin-2 (Mag-2), a well-known antimicrobial peptide isolated from the African clawed frog Xenopus laevis, by functional proteomic approaches. Several proteins belonging to E. coli macromolecular membrane complexes were identified as Mag-2 putative interactors. Among these, we focused our attention on BamA a membrane protein belonging to the BAM complex responsible for the folding and insertion of nascent β-barrel Outer Membrane Proteins (OMPs) in the outer membrane. In silico predictions by molecular modelling, in vitro fluorescence binding and Light Scattering experiments carried out using a recombinant form of BamA confirmed the formation of a stable Mag-2/BamA complex and indicated a high affinity of the peptide for BamA. Functional implications of this interactions were investigated by two alternative and complementary approaches. The amount of outer membrane proteins OmpA and OmpF produced in E. coli following Mag-2 incubation were evaluated by both western blot analysis and quantitative tandem mass spectrometry in Multiple Reaction Monitoring scan mode. In both experiments a gradual decrease in outer membrane proteins production with time was observed as a consequence of Mag-2 treatment. These results suggested BamA as a possible good target for the rational design of new antibiotics since this protein is responsible for a crucial biological event of bacterial life and is absent in humans.

Effects of cholesterol on the anionic magnetite nanoparticle-induced deformation and poration of giant lipid vesicles

We have investigated the effects of cholesterol on the deformation and poration of giant unilamellar vesicles (GUVs) induced by anionic magnetite nanoparticles (NPs). Negatively charged lipid, neutral lipid, and cholesterol were used to prepare the charged GUVs (surface charge density of membranes - 0.16 C m-2), while only neutral lipid and cholesterol were used to prepare the neutral GUVs. Cholesterol content varied from 0 to 40 mole% for preparing the biologically relevant membranes. The degree of deformation has been characterized by compactness, the value of which remains at 1.0 for spherical GUVs. The value of compactness increases with time for both membranes, but this increase depends on cholesterol content. The average compactness decreases with cholesterol content, and at 60 min, the values are 1.280 ± 0.002 and 1.131 ± 0.010 for 0 and 40 mole% cholesterol containing charged GUVs. The average compactness is relatively lower for neutral GUVs for the corresponding cholesterol. Membrane poration has been investigated by the leakage of calcein, which indicates a two-state transition model. The fraction of deformation is higher for charged GUVs than for neutral ones, while the fraction of poration shows the opposite result. Both the fractions decrease with cholesterol content.

Single-Cell Analysis of the Antimicrobial and Bactericidal Activities of the Antimicrobial Peptide Magainin 2

Antimicrobial peptides (AMPs) inhibit the proliferation of or kill bacterial cells. To measure these activities, several methods have been used, which provide only the average value of many cells. Here, we report the development of a method to examine the antimicrobial and bactericidal activities of AMPs at the single-cell level (i.e., single-cell analysis) and apply this strategy to examine the interaction of an AMP, magainin 2 (Mag), with Escherichia coli cells. Using this method, we monitored the proliferation of single cells on agar in a microchamber and measured the distribution of the number of cells in each microcolony using optical microscopy. For method A, we incubated cells in the presence of various concentrations of AMPs for 3 h. The fraction of microcolonies containing only a single cell, Psingle, increased with the Mag concentration and reached 1 at a specific concentration, which corresponded to the MIC. For method B, after the interaction of a cell suspension with an AMP for a specific time, an aliquot was diluted to stop the interaction, and the proliferation of single cells then was monitored after a 3-h incubation; this method permits the definition of Psingle(t), the fraction of dead cells after the interaction. For the interaction of Mag with E. coli cells, Psingle(t) increased with the interaction time, reaching ~1 at 10 and 20 min for 25 and 13 μM Mag, respectively. Thus, these results indicate that a short interaction time between Mag and E. coli cells is sufficient to induce bacterial cell death. IMPORTANCE To elucidate the activity of antimicrobial peptides (AMPs) against bacterial cells, it is important to estimate the interaction time that is sufficient to induce cell death. We have developed a method to examine the antimicrobial and bactericidal activities of AMPs at the single-cell level (i.e., single-cell analysis). Using this method, we monitored the proliferation of single cells on agar in a microchamber and measured the distribution of the number of cells in each microcolony using optical microscopy. We found that during the interaction of magainin 2 (Mag) with E. coli cells, the fraction of dead cells, Psingle(t), increased with the interaction time, rapidly reaching 1 (e.g., 10 min for 25 μM Mag). This result indicates that Mag induces cell death after a short time of interaction.