Preparation and characterization of nanofibrous metal-organic frameworks as efficient catalysts for the synthesis of cyclic carbonates in solvent-free conditions

Modified melamine-based porous organic polymers with imidazolium ionic liquids as efficient heterogeneous catalysts for CO2 cycloaddition

The chemical conversion of carbon dioxide (CO2) into highly value-added products not only alleviates the environmental issues caused by global warming but also makes an impact on economic benefits in the world. The synthesis of cyclic carbonates by the cycloaddition of CO2 with epoxides is one of the most attractive methods for CO2 conversion. However, the development of green and highly efficient heterogeneous catalysts is considered to be a great challenge in catalysis. In this work, alkenyl-modified melamine-based porous organic polymer (MPOP-4A) was firstly synthesized by a one-pot polycondensation method, and it was again modified with imidazolium-based ionic liquids to obtain final modified catalyst (MPOP-4A-IL). Various analytical techniques were used to confirm structure and chemical composition of the prepared materials. The MPOP-4A-IL catalyst synthesized by the post-modification strategy with imidazolium-based ionic liquids exhibited enhanced catalytic activity for CO2 cycloaddition reaction. The enhanced catalytic performance could be attributed to the presence of abundant active sites in their structure such as hydrogen bond donors (HBD), nitrogen (N) sites, and nucleophilic groups for an effective chemical reaction. The MPOP-4A-IL catalyst was found to be metal-free, easy to recycle and reuse, and has good versatility for a series of different epoxides. The interaction of MPOP-4A-IL catalyst with epoxide and CO2 was further verified by density functional theory (DFT) calculations, and the possible mechanism of the CO2 cycloaddition reaction was proposed.

Green synthesize of nano-MOF-ethylcellulose composite fibers for efficient adsorption of Congo red from water

Two novel MOF- ethyl cellulose (EC)- based nanocomposites have been designed and synthesized in water by electrospinning and applied for adsorption of congo red (CR) in water. Nano- Zeolitic Imidazolate Framework-67 (ZIF-67), and Materials of Institute Lavoisier (MIL-88A) were synthesized in aqueous solutions by a green method. To enhance the dye adsorption capacity and stability of MOFs, they have been incorporated into EC nanofiber to prepare composite adsorbents. The performance of both composites in the absorption of CR, a common pollutant in some industrial wastewaters, has then been investigated. Various parameters including initial dye concentration, the dosage of the adsorbent, pH, temperature and contact time were optimized. The results indicated 99.8 and 90.9% adsorption of CR by EC/ZIF-67 and EC/MIL-88A, respectively at pH = 7 and temperature at 25 °C after 50 min. Furthermore, the synthesized composites were separated conveniently and successfully reused five times without significant loss of their adsorption activity. For both composites, the adsorption behavior can be explained by pseudo-second-order kinetics, Intraparticular diffiusion and Elovich models demonstrated that the experimental data well matched to the pseudo-second-order kinetics. Intraparticular diffiusion model showed that the adsorption of CR on EC/ZIF-67 and EC/MIL-88a took place in one and two steps, respectively. Freundlich isotherm models and thermodynamic analysis indicated exothermic and spontaneous adsorption.

Carbonic Anhydrase-Embedded ZIF-8 Electrospun PVA Fibers as an Excellent Biocatalyst Candidate

There is a growing concern that the increasing concentration of CO₂ in the atmosphere contributes to a potential negative impact on global climate change. To deal with this problem, developing a set of innovative, practical technologies is essential. In the present study, maximizing the CO₂ utilization and precipitation as CaCO₃ was evaluated. In this manner, bovine carbonic anhydrase (BCA) was embedded into the microporous zeolite imidazolate framework, ZIF-8, via physical absorption and encapsulation. Running as crystal seeds, these nanocomposites (enzyme-embedded MOFs) were in situ grown on the cross-linked electrospun polyvinyl alcohol (CPVA). The prepared composites displayed much higher stability against denaturants, high temperatures, and acidic media than free BCA, and BCA immobilized into or on ZIF-8. During 37 days of storage period study, BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA maintained more than 99 and 75% of their initial activity, respectively. The composition of BCA@ZIF-8 and BCA/ZIF-8 with CPVA improved stability for consecutive usage in recovery reactions, recycling easiness, and greater control over the catalytic process. The amounts of calcium carbonate obtained by one mg each of fresh BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA were 55.45 and 49.15 mg, respectively. The precipitated calcium carbonate by BCA@ZIF-8/CPVA reached 64.8% of the initial run, while this amount was 43.6% for BCA/ZIF-8/CPVA after eight cycles. These results indicated that the BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA fibers could be efficiently applied to CO₂ sequestration.

Solid-state electrochemiluminescence sensor based on zeolitic imidazolate framework-67 electrospinning nanofibers for chlorpyrifos detection

A novel solid-state electrochemiluminescence (ECL) sensor for chlorpyrifos (CPF) detection was constructed based on zeolitic imidazolate framework-67 electrospinning nanofibers (ZIF-67 NFs). Silver nanoparticles (Ag NPs), ZIF-67 NFs, tris(2,2'-bipyridyl) ruthenium(II) [Ru(bpy)₃²⁺], and Nafion were successively deposited on the surface of the electrode. Ag NPs played a role in promoting electron transfer, and ZIF-67 NFs played a role in fixing Ru(bpy)₃²⁺ and promoting electron transfer due to its large specific surface area and porosity. Nafion formed a film on the outermost layer of the electrode to further improve the stability of the system. Therefore, the modified electrode showed stable and obvious ECL signal in PBS solution containing 10 μL 0.01 M TprA (pH 8.0). CPF quenched the ECL signal of the system, and the quenching value was linear with the logarithm of CPF concentration in the range 1.0 × 10^-13 to 1.0 × 10^-6 M. The detection limit was 3.3 × 10^-14 M (S/N = 3). In this study, ZIF-67 NFs were used as an ECL promoter for the first time, broadening the application range of ZIF-67 NFs.

Guanidyl-implanted UiO-66 as an efficient catalyst for the enhanced conversion of carbon dioxide into cyclic carbonates

The development of heterogeneous catalysts for promoting epoxide cycloaddition with carbon dioxide is highly desirable for recycling CO₂ and achieving the goal of carbon neutrality. Herein, we designed and synthesized Zr-based metal organic frameworks (MOFs) by implanting functional guanidyl into the framework via mixing different molar ratios of 4-guanidinobenzoic acid (Gua) with 1,4-benzenedicarboxylic acid (BDC). Consequently, a small sized Zr-MOF (∼350 nm) can be prepared by implanting Gua with 20% molar ligands, denoted as UiO-66-Gua_0.2(s). Compared to large sized and different guanidyl Zr-MOFs, UiO-66-Gua_0.2(s) exhibited an optimal activity on catalyzing epoxide cycloaddition with CO₂ in the presence of the Bu₄NBr cocatalyst. A yield of 97% for the product of chloropropene carbonate was achieved at 90 °C under 1 atm CO₂. The great performance of UiO-66-Gua_0.2(s) might be attributed to the synergistic effect of guanidyl groups as hydrogen-bond donors and Zr centers acting as Lewis-acidic sites. In addition, the heterogeneous catalyst of UiO-66-Gua_0.2(s) exhibited a great versatility towards converting other epoxides and a satisfactory recyclability for five consecutive runs. Moreover, a plausible reaction mechanism has been proposed for UiO-66-Gua_0.2(s) in promoting CO₂ epoxide cycloaddition reactions.

Integration of polypyridyl-based ionic liquids into MIL-101 for promoting CO2 conversion into cyclic carbonates under cocatalyst-free and solventless conditions

The polypyridyl-based ionic liquid-functionalized MIL-101(Cr) greatly enhanced the epoxide–CO2 cycloaddition reaction under cocatalyst-free and solventless conditions.