Core-shell CuO@NiCoMn-LDH supported by copper foam for high-performance supercapacitors

Single-step,in-situfabrication of flower-like NiCuMn hybrid oxyhydroxide electrodes for enhanced supercapacitor performance

The rational design of highly active and low-cost electrode material is very promising for energy storage applications. The development of supercapacitors with high energy/power density is an imperative and challenging research objective. Herein, we report a highly facile synthesis approach for developing unique nano-porous hybrid NiCuMn oxyhydroxide architecture with remarkable electrochemical energy storage characteristics. The process involves dealloying of Ni15Cu15Mn70alloy in an oxygen rich environment, resulting in a uniform 3-dimensional flower like morphology. The dealloyed electrode demonstrates ultra-high specific capacitance of 4110 F cm-3at a high current density of 20 mA cm-2. A symmetric device exhibits a high volumetric capacitance of 365 F cm-3at a current density of 10 mA cm-2with a large potential window of 1.7 V. Even at very high-power density of 850 W l-1, the device exhibits a high energy density of 146 Wh l-1along with remarkable cyclic stability of 95.4% after 10 000 cycles. The superior performance of nano-porous hybrid NiCuMn oxyhydroxide architecture was attributed to its unique microstructure that provides high surface area, and marginal internal resistance ensuring rapid charge transport.

Facile Route to Achieve a Hierarchical CuO/Nickel-Cobalt-Sulfide Electrode for Energy Storage

Herein, a novel self-supporting CuO/nickel-cobalt-sulfide (NCS) electrode was designed in a two-step electrodeposition technique followed by a calcination process. Three-dimensional copper foam (CF) was exploited as the current collector and spontaneous source for the in situ preparation of the CuO nanostructures, which ensured sufficient deposition space for the subsequent NCS layer, thus forming abundant electrochemical active sites. Such a hierarchical structure is conducive to providing a smooth path for promoting electronic transmission. Therefore, the optimized CuO/NCS electrode exhibits outstanding energy storage capability with extremely superior specific capacitance (Cs) of 7.08 F cm-2 at 4 mA cm-2 and coulombic efficiency of up to 94.83%, as well as excellent cycling stability with capacitance retention of 83.33% after 5000 cycles. The results presented in this work extend our horizons to fabricate novel hierarchical structured electrodes applied to energy storage devices.

Ni-Co-Mn hydrotalcite-derived hierarchically porous sulfide for hybrid supercapacitors

Ternary transition metal sulfides have attracted much attention due to their superior electrochemical properties. Nevertheless, it is difficult to commercialize sulfides due to their intrinsic properties such as dull reaction kinetics and an insufficient number of active sites. Herein, a self-supporting porous NiCoMnS sulfide (NiCoMnS/NF) arrayed on nickel foam (NF) with 3D honeycomb-like structure was designed and prepared via a hydrothermal and post-sulfidation process. It was found that the 3D hierarchically network architecture, constructed by nanosheets with abundant cavities, endowed NiCoMnS/NF with a high specific area and rich ion/electron-transport channels, which facilitated ion/electron transfer and Faradaic reaction kinetic. The optimal NiCoMnS/NF exhibited a markedly improved electrochemical performance due to the merits of complementary multi-composition and unique 3D network structure with multi-level "superhighways". Furthermore, the NiCoMnS//AC device fabricated with NiCoMnS/NF cathode and activated carbon (AC) anode delivered an excellent specific charge and exceptional energy density. This work offers a reference for designing the structure of electrode materials.

MOF-derived NiCo-LDH Nanocages on CuO Nanorod Arrays for Robust and High Energy Density Asymmetric Supercapacitors

Layered double hydroxide (LDH) is widely explored in supercapacitors on account of its high capacity, adjustable composition and easy synthesis process. Unfortunately, solitary LDH still has great limitations as an electrode material due to its shortcomings, such as poor conductivity and easy agglomeration. Herein, nanoflakes assembled NiCo-LDH hollow nanocages derived from a metal-organic framework (MOF) precursor are strung by CuO nanorods formed from etching and oxidation of copper foam (CF), forming hierarchical CuO@NiCo-LDH heterostructures. The as-synthesized CuO@NiCo-LDH/CF shows a large capacitance (5607 mF cm^-2 at 1 mA cm^-2 ), superior rate performance (88.3 % retention at 10 mA cm^-2 ) and impressive cycling durability (93.1 % capacitance is retained after 5000 cycles), which is significantly superior to control CuO/CF, CuO@ZIF-67/CF, NiCo-LDH/CF and Cu(OH)₂ @NiCo-LDH/CF electrodes. Besides, an asymmetrical supercapacitor consists of CuO@NiCo-LDH/CF and activated carbon displays a maximum energy density of 47.3 Wh kg^-1 , and its capacitance only declines by 6.8 % after 10000 cycles, demonstrating remarkable cycling durability. The advantages of highly conductive and robust CuO nanorods, MOF-derived hollow structure and the core-shell heterostructure contribute to the outstanding electrochemical performance. This synthesis strategy can be extended to design various core-shell heterostructures adopted in versatile electrochemical energy storage applications.

Crystalline phase transformation of Co-MOF derivatives on ordered mesoporous carbons for high-performance supercapacitor applications

Preparation and phase transformation of Co-based metal–organic frameworks derivatives.

Synthesizing Ag2Ox(3 wt%)-loaded ZnFe2O4 photocatalysts for efficiently saving polluted aquatic ecosystems

Herein, we report an Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts synthesized by co-precipitation and incipient wet impregnation approach for acetamiprid degradation, antibacterial, antioxidant, and toxicity assay. Initially, bare ZnFe2O4 nanostructures were made through a simple co-precipitation method. In the second step, 3 wt% of various transition metal oxides (CuOx, ZrOx, and Ag2Ox) were embedded on the surface of ZnFe2O4 photocatalysts via a wet impregnation method. Further, the prepared photocatalysts were systematically characterized using XRD, FTIR, FE-SEM, BET, HRTEM, and XPS analysis. The optimum Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts revealed higher degradation efficiencies for acetamiprid under sunlight irradiation. Additionally, the Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts showed more effective antioxidant and antibacterial activity than blank and bare ZnFe2O4 nanomaterials. The enriched catalytic efficiency can be accredited to the 3 wt% of Ag2Ox NPs loaded on ZnFe2O4 nanomaterials, possibly due to the boosted transport properties of the electron-hole pairs. This study will provide a new avenue for the development of simple and effective photocatalysts for efficiently saving polluted aquatic ecosystems.

Enhancement in the visible light induced photocatalytic and antibacterial properties of titanium dioxide codoped with cobalt and sulfur

In this study, the sol-gel technique was used to develop Cobalt Sulfur codoped Titanium Dioxide (Co-S codoped TiO₂) photocatalysts. For structural analysis of the prepared resultant TiO₂ samples, XRD, FTIR, UV-Vis DRS, SEM, HR-TEM and EDX measurements were used to describe the produced photocatalysts. The characterization findings indicate that the synthesized nanoparticles possessed great crystallinity, high purity, and superior optical characteristics. For the methylene blue (MB) degradation process, Co-S codoped TiO₂ nanoparticles were tested for their photocatalytic degradation performance. The Co-S codoped TiO₂ nanoparticles had improved catalytic activity when compared with pure, Co-doped, S-doped TiO₂ and decomposed 93% of MB in 120 min. When compared to pure and doped TiO₂, the catalysts of Co-S codoped TiO₂ showed a synergistic effect and improved the performance of the catalysts. Furthermore, the antibacterial applications of synthesized Co-S codoped TiO₂ nanoparticles was studied against E. coli (Gram negative) and S. aureus (Gram positive) bacteria and exhibited strong antibacterial activity against the selected strains.

Facile construction of cost-effective zinc-aluminium polymeric framework for efficient removal of selective both drug and dye from an aqueous medium

A novel aluminium (Al) and its active alloys are extensively been used in nearly all areas owing to their cost-effectiveness. But when it is subjected to an aqueous medium, gets corroded through a chemical response. In this paper, a novel framework was fabricated by copolymer coating over on Al and loaded with zinc via electro polymerization and electrodeposition method ([EDA- OPDA]Al@Zn). The as-fabricated composite has emerged for the sorption of Methylene Blue (MB) aqueous dye and Paracetomal drug (PAR). The as-fabricated composite framework has been categorized via IR spectra, FE-SEM images, and EDX spectra. The sorption progression was optimized for numerous prompting features like pH, contact time and impact of dosage. Based on kinetics data, the growth in QE value by an enhancement in temperature for adsorption and the higher r values shows the adsorption progression is a pseudo-second-order model. The thermodynamic constraints specify that the field of adsorbate is impulsive and typical endothermic process. Instead, the corrosion resistance of a composite in the 3.5% of NaCl. Solution was explored via EIS spectra and potentio-dynamic polarization. Depending on the observed features, it indicates that the [EDA-OPDA]Al@Zn framework provided fantastic corrosion resistance. So it is obvious that the as-synthesized framework is of multitasking, that it could be successfully performed for the exclusion of MB aqueous dye and PAR drug from the aqueous medium and it also withstands effectively in this corrosive medium.

Constructing Z-scheme g-C3N4/TiO2 heterostructure for promoting degradation of the hazardous dye pollutants

The use of dyes and segments has increased widely in recent years, but it poses a serious health risk to ecosystems. In this work, TiO₂ and two-dimensional g-C₃N₄ nanosheets (g-CN) were fabricated through co-precipitation and thermal polymerization technique, respectively. The g-CN-TiO₂ photocatalyst (1: 3, 2: 2, 3: 1) in various weight percentages was prepared using a simple impregnation process. The photocatalytic behaviour of the g-CN, TiO₂ NPs, and different weight percentages of g-CN-TiO₂ photocatalyst was evaluated against methylene blue (MB) dye under UV-visible light illumination. Compared to pristine and other weight percentages of the g-CN-TiO₂ nanocomposite, the optimized g-CN-TiO₂ nanocomposite (3:1) showed promoted performance against MB dye. The enriched catalytic efficiency can be accredited to the low amount of TiO₂ nanoparticles deposited on gCN nanosheets, possibly due to the boosted transport properties of the electron-hole pairs. The enriched photocatalytic behaviour can be attributed to the development of the Z-scheme system between TiO₂ and g-CN. The current study is an outstanding demonstration of the development of maximum catalytic efficiency for destroying hazardous chemical dyes.

Reduced graphene oxide: Biofabrication and environmental applications

Green synthesis of high-quality reduced graphene oxide (rGO) from agro-industrial waste resources remains attractive owing to its outstanding environmental benefits. The remarkable properties of rGO include excellent morphology, uniform particle size, good optical properties, high conductivity, nontoxicity, and extraordinary chemical stability. Traditional methods for the synthesis of rGO nanomaterials involve several chemical reactions including oxidation, carbonization, toxic solvent, and pyrolysis which produce harmful byproducts. Green preparation of rGO is an emerging area of research in graphene technology which is cost-effective and sustainable in the procedure. Owing to the uniform particle rGO particle size, these smart nanomaterials have wide applicability, including in metal ions and pollutant sensing and adsorption, photocatalysis, optoelectrical devices, medical diagnosis, and drug delivery. Here we review the physicochemical properties of rGO, the biowaste sources and green methods of rGO synthesis, and the diverse applications of rGO, including in water purification and the biomedical fields. With this review, covering more than 200 research articles published on rGO in the last eight years ending in 2022, we aim to provide a quick guide for researchers seeking up-to-date information on the properties, production, and applicability of rGO, with special attention to rGO applications in water purification and the biomedical fields.

Atomic Scale Optimization Strategy of Al-Based Layered Double Hydroxide for Alkali Stability and Supercapacitors

The pseudocapacitor material is easily decomposed when immersed in alkaline solution for a long time. Hence, it is necessary to find a strategy to improve the alkali stability of pseudocapacitor materials. In addition, the relationship between alkali stability and electrochemical performance is still unclear. In this work, a series of Al-based LDH (Layered double hydroxide) and derived Ni/Co-based sulfides are prepared, and corresponding alkali stability and electrochemical performance are analyzed. The alkali stability of CoAl LDH is so poor and can be improved effectively by doping of Ni. Ni₁Co₂S₄ and Ni₂Co₁Al LDH exhibit an outstanding alkali stability, and Ni₂Co₁S₄ exhibits an extremely poor alkali stability. The variable valence state of Co element and the solubility of Al in alkali solution are the fundamental reasons for the poor alkali stability of CoAl LDH and Ni₂Co₁S₄. Ni₂Co₁S₄ showed an outstanding electrochemical performance in a three-electrode system, which is better than that of Ni₁Co₂S₄, indicating that there is no direct correlation between alkali stability and electrochemical properties. Sulfidation improved the electrical conductivity and electrochemical activity of electrode materials, whereas alkali etching suppressed the occurrence of the electrochemical reaction. Overall, this work provides a clear perspective to understand the relationship between alkali stability and electrochemical properties.

Facile Route to Achieve Self-Supported Cu(OH)2/Ni3S2 Composite Electrode on Copper Foam for Enhanced Capacitive Energy Storage Performance

Herein, a Cu(OH)2/Ni3S2 composite was successfully prepared through facile two-step electrodeposition. As the electrode substrate and the only copper source, the copper foam underwent surface oxidation by galvanostatic deposition technology to form Cu(OH)2, and the subsequent coverage of Ni3S2 was achieved by potentiostatic deposition. The Cu(OH)2 acts as a skeleton, providing support for Ni3S2 growth, thus providing more abundant electrochemical active sites. By virtue of the in situ growth strategy and the synergy of different components, the optimized Cu(OH)2/Ni3S2 electrode illustrates significantly enhanced pseudocapacitance performance, with an areal specific capacitance of 11.43 F cm−2 at 2 mA cm−2, good coulombic efficiency of 94.55%, and remarkable cyclic stability (83.33% capacitance retention after 5000 cycles).