Green synthesis of fluorescent carbon dots with antibacterial activity and their application in Atlantic mackerel (Scomber scombrus) storage

Green synthesis of N-doped-carbon dots/ZnO for enhanced photocatalytic degradation of methylene blue dye: optimization of reaction parameters

In this research work, nitrogen-doped carbon dots (N-CDs) adorned zinc oxide nanoparticles (N-CDs/ZnO) were successfully synthesized by a simple and cost-effective solution dispersion method and later on used as photocatalyst for decontamination of aqueous methylene blue (MB) dye on irradiation of UV light (300 W, 320-400 nm) at room temperature. Both the N-CDs and ZnO were prepared through green technique utilizing non-toxic, inexpensive and eco-friendly precursors, namely Foeniculum vulgare and Psidium guajava leaf extract, respectively. All the synthesized samples exhibited crystalline nature with average diameter of particle 4.42 nm, 12.38 nm and 14.11 nm corresponding to N-CDs, ZnO and N-CDs/ZnO, respectively. Further, band gap energy value (Eg) of 3.43, 2.76 and 2.49 eV for N-CDs, ZnO and N-CDs/ZnO, respectively, were obtained by using Tauc's plot. The photocatalytic capability of the sample N-CDs/ZnO was compared with bare ZnO nanoparticles, utilizing identical experimental conditions. The results demonstrated that the composite exhibited notably higher photocatalytic degradation efficiency than bare ZnO nanoparticles up to 15.54%. Lower band gap value of N-CDs/ZnO was the major factor for exhibiting this behaviour, decreasing the recombination rate and thus enhancing the efficiency. Furthermore, N-CDs/ZnO exhibited 98.17% MB degradation under optimized conditions (0.03 g, 5 ppm, pH 10). The resultant N-CDs/ZnO exhibited good stability and decontamination efficiency up to five cycles with efficiency loss of only 7.89%. Along with, trapping experiments was conducted to analyze the role of active species involved for deep understanding of mechanism. The order of efficiency of active constituents was observed to be: •O2-  > h+  > •OH. The study analyzed the non-toxic nature of treated water, revealing normal plant growth, suggesting its potential use in irrigation of parks and roadside areas. Overall, present research work obeys the green chemistry principles with the fabrication of highly efficient, eco-friendly, cost-effective photocatalyst N-CDs/ZnO by utilizing the green precursors for the whole research work.

Biomass-derived carbon dots with pharmacological activity for biomedicine: Recent advances and future perspectives

Carbon dots (CDs), a type of nanoparticle with excellent optical properties, good biocompatibility, and small size, are finding increasing application across the fields of biology and biomedicine. In recent years, biomass-derived CDs with pharmacological activity (BP-CDs) derived from herbal medicines (HMs), HMs extracts and other natural products with demonstrated pharmaceutical activity have attracted particular attention. Herein, we review recent advances in the development of BP-CDs, covering the selection of biomass precursors, different methods used for the synthesis of BP-CDs from natural sources, and the purification of BP-CDs. Additionally, we summarize the many remarkable properties of BP-CDs including optical properties, biocompatibility and pharmaceutical efficacy. Moreover, the antibacterial, antiviral, anticancer, biosensing, bioimaging, and other applications of BP-CDs are reviewed. Thereafter, we discuss the advantages and disadvantages of BP-CDs and Western drug-derived CDs, highlighting the excellent performance of BP-CDs. Finally, based on the current state of research on BP-CDs, we suggest several aspects of BP-CDs that urgently need to be addressed and identify directions that should be pursued in the future. This comprehensive review on BP-CDs is expected to guide the precise design, preparation, and future development of BP-CDs, thereby advancing the application of BP-CDs in biomedicine.

Carbon Dots Infused 3D Printed Cephalopod Mimetic Bactericidal and Antioxidant Hydrogel for Uniaxial Mechano-Fluorescent Tactile Sensor

Cephalopods use stretchy skin and dynamic color-tuning organs for visual communication and camouflage. Inspired by these natural mechanisms, a fluorescent biomaterial for deformation-induced illumination and optical communication is proposed. This is the first report of 3D printed soft biomaterials infused with carbon dots hydrothermally derived from chitosan and benzalkonium chloride. These biomaterials exhibit a comprehensive array of properties, including significant uniaxial stretching, near-instantaneous response to tactile stimuli and pH, UV resistance, antibacterial, antioxidant, noncytotoxicity, and highlighting their potential as mechano-optical materials for biomedical applications. The hydrogel's durability is evaluated by cyclic stretching, folding, rolling, and twisting tests to ensure its integrity and good signal-to-noise ratio. The diffusion mechanism is determined by water imbibition kinetics, network parameters, and time-dependent breathing. Overcoming the common limitations of short lifespans and complex manufacturing processes in existing soft hybrids, this work demonstrates a straightforward method to produce durable, energy-independent, mechano-optical hydrogel. Combined with investigations, molecular dynamic modeling is used to understand the interactions of hydrogel components.

Engineering of Green Carbon Dots for Biomedical and Biotechnological Applications

Carbon dots (CDs) are attracting increasing research attention due to their exceptional attributes, including their biocompatibility, water solubility, minimal toxicity, high photoluminescence, and easy functionalization. Green CDs, derived from natural sources such as fruits and vegetables, present advantages over conventionally produced CDs, such as cost-effectiveness, stability, simplicity, safety, and environmental friendliness. Various methods, including hydrothermal and microwave treatments, are used to synthesize green CDs, which demonstrate strong biocompatibility, stability, and luminescence. These properties give green CDs versatility in their biological applications, such as bioimaging, biosensing, and drug delivery. This review summarizes the prevalent synthesis methods and renewable sources regarding green CDs; examines their optical features; and explores their extensive biological applications, including in bioimaging, biosensing, drug/gene delivery, antimicrobial and antiviral effects, formatting of mathematical components, cancer diagnosis, and pharmaceutical formulations.

Preparation of multi-functional active packaging film of Galla chinensis waste CDs/pullulan

In this study, multifunctional green carbon dots (CDs) have been synthesized using Galla chinensis waste (GCW) via hydrothermal method for the first time. An active packaging film has been developed in this work by combining CDs and pullulan (PL), using the solution-casting method. The microscopic morphology revealed that the CDs that were prepared using GCW exhibited good compatibility with PL. In addition, it also led to improvement in the toughness of the PL film (14.01 % to 20.26 %), along with its water vapor permeability value [1.31 to 0.53 (g·mm)/(kPa·h·m2)]. The composite films consisting of CDs exhibited good UV blocking rates for the UVA (90.41 %-7.87 %), UVB (87.76 %-0.08 %), and UVC (83.39 %-0 %) spectral ranges. The composite films exhibited strong antioxidant activity, and the clearance of ABTS and DPPH were obtained to be 93.61 % and 86.30 %, respectively. In addition, the composite films showed good antibacterial activity for E. coli and S. aureus, with a high antibacterial rate of up to 99.99 %. Finally, the non-contact preservation of strawberries over a duration of 10 d at room temperature confirmed that the prepared composite film can help preserve the quality of strawberries, as well as extended their shelf-life.

Nanomaterials with Enzyme-like Properties for Combatting Foodborne Pathogen Infections: Classifications, Mechanisms, and Applications in Food Preservation

During the transportation and storage of food, foodborne spoilage caused by bacterial and biofilm infection is prone to occur, leading to issues such as short shelf life, economic loss, and sensory quality instability. Therefore, the development of novel and efficient antibacterial agents capable of efficiently inhibiting bacteria throughout various stages of food processing, transportation, and storage is strongly recommended by researchers. The emergence of nanozymes is considered to be an effective candidate for inhibiting foodborne bacteria agents in the food industry. As potent antibacterial agents, nanozymes have the advantages of low cost, high stability, strong broad-spectrum antibacterial ability, and biocompatibility. Herein, we aim to summarize the classification status of various nanozymes. Furthermore, the general catalytic bacteriostatic mechanism of nanozymes against intracellular bacteria, planktonic bacteria, and biofilm activities are highlighted, mainly concerning the destruction of cell walls and/or membranes, reactive oxygen species regulation, HOBr/Cl generation, damage of intracellular components, and so forth. In particular, the review focuses on the pivotal role of nanozymes as antibacterial agents and delivery vehicles in the fields of food preservation applications. We look forward to the future prospects, especially in the field of food preservation, to promote broader applications based on antimicrobial nanozymes.

Antimicrobial carbon dots/pectin-based hydrogel for promoting healing processes in multidrug-resistant bacteria-infected wounds

Multidrug-resistant (MDR) bacterial infections have become a significant threat to global healthcare systems. Here, we developed a highly efficient antimicrobial hydrogel using environmentally friendly garlic carbon dots, pectin, and acrylic acid. The hydrogel had a porous three-dimensional network structure, which endowed it with good mechanical properties and compression recovery performance. The hydrogel could adhere closely to skin tissues and had an equilibrium swelling ratio of 6.21, indicating its potential as a wound dressing. In particular, the bactericidal efficacy following 24-h contact against two MDR bacteria could exceed 99.99 %. When the hydrogel was applied to epidermal wounds infected with methicillin-resistant Staphylococcus aureus (MRSA) on mice, a remarkable healing rate of 93.29 % was observed after 10 days. This was better than the effectiveness of the traditionally used antibiotic kanamycin, which resulted in a healing rate of 70.36 %. In vitro cytotoxicity testing and hemolysis assay demonstrated a high biocompatibility. This was further proved by the in vivo assay where no toxic side effects were observed on the heart, liver, spleen, lung, or kidney of mice. This eco-friendly and easy-to-prepare food-inspired hydrogel provides an idea for the rational use of food and food by-products as a wound dressing to control MDR bacterial infections.

Carbon Dot as Visible-Light Photoredox Catalysts for a Myriad of Organic Transformations

Metal-free catalysts for various organic transformations are of high demand now. In this study, we present a new carbon dot as an efficient metal-free nanophotocatalyst for carrying out a series of organic bond formation reactions. Using a single photocatalyst carbon dot, Csp2-Csp2, Csp2-B, Csp2-S, Csp2-Se, and C-P bond formation reactions were performed with a high yield of the corresponding products. Moreover, Csp2-H activation of the aromatic ring was achieved by merging the carbon dot photocatalyst with a transition metal. Interestingly, these carbon nanodot-based catalysts show good recyclability a few times without any significant loss of catalytic activity. The development of catalytic systems based on carbon dots has its merits vested in the advantageous properties of this nanomaterial, such as a robust chemical nature and cheap cost of preparation. This report demonstrates that a carbon dot indeed holds the potential to replace expensive metal-based catalysts as well as organic dyes in five different photoredox reactions.

Boric Acid-Functionalized Carbon Dots as a High-Performance Antibacterial Agent against Escherichia coli

Bacterial infections and antibiotic abuse are a global threat to human health. In recent years, there has been a boom in research on antimicrobial agents with low toxicity and efficient nanomaterials. Boric acid-functionalized carbon dots (B-CDs) with negative surface charge were synthesized by the hydrothermal method. Covalent bonds were formed between the boric acid groups and the cis-diol groups of the polysaccharide in the bacterial cell wall, and numerous B-CDs were trapped on the bacterial surface. In the experiments of antibacterial activity, B-CDs presented strong bactericidal activity against Escherichia coli (E. coli) with a minimum bactericidal concentration of 12.5 μg/mL. The antibacterial mechanism suggested that B-CDs entered the cell interior by diffusion and posed significant damage to the double helix structure of E. coli DNA. Furthermore, B-CDs exhibited low toxicity. The results demonstrated that the novel antimicrobial B-CDs not only fought against E. coli infection and antibiotic misuse but also provided new ideas for safe and effective antimicrobial agents of carbon nanomaterials.

Potential Efficacy of Herbal Medicine-Derived Carbon Dots in the Treatment of Diseases: From Mechanism to Clinic

Carbon dots (CDs), a crucial component of nanomaterials, are zero-dimensional nanomaterials with carbon as the backbone structure and smaller than 10 nm. Due to their beneficial characteristics, they are widely used in biomedical fields such as biosensors, drug delivery, bio-imaging, and interactions with DNA. Interestingly, a novel type of carbon dot, generated by using herbal medicines as synthetic raw materials, has emerged as the most recent incomer in the family of CDs with the extensive growth in the number of materials selected for carbon dots synthesis. Herbal medicine-derived carbon dots (HM-CDs) have been employed in the biomedical industry, and are rapidly emerging as "modern nanomaterials" due to their unique structures and exceptional capabilities. Emerging trends suggest that their specific properties can be used in bleeding disorders, gastrointestinal disorders, inflammation-related diseases, and other common intractable diseases including cancer, menopausal syndrome, central nervous system disorders, and pain of various forms and causes. In addition, HM-CDs have been found to have organ-protective and antioxidant properties, as evidenced by extensive studies. This research provides a more comprehensive understanding of the biomedical applications of HM-CDs for the aforementioned disorders and investigates the intrinsic pharmacological activities and mechanisms of these HM-CDs to further advance their clinical applications.

Carbon Dots Derived from Traditional Chinese Medicines with Bioactivities: A Rising Star in Clinical Treatment

In the field of carbon nanomaterials, carbon dots (CDs) have become a preferable choice in biomedical applications. Based on the concept of green chemistry, CDs derived from traditional Chinese medicines (TCMs) have attracted extensive attention, including TCM charcoal drugs, TCM extracts, and TCM small molecules. The design and preparation of CDs from TCMs (TCMs-CDs) can improve the inherent characteristics of TCMs, such as solubility, particle size distribution, and so on. Compared with other precursor materials, TCMs-CDs have outstanding intrinsic bioactivities and potential pharmacological effects. However, the research of TCMs-CDs in biomedicine is not comprehensive, and their mechanisms have not been understood deeply either. In this review, we will provide concise insights into the recent development of TCMs-CDs, with a major focus on their preparation, formation, precursors, and bioactivities. Then we will discuss the perfect transformation from TCMs to TCMs-CDs. Finally, we discuss the opportunities and challenges for the application of TCMs-CDs in clinical treatment.

Antibacterial Carbon Dots: Mechanisms, Design, and Applications

The increase in antibiotic resistance promotes the situation of developing new antibiotics at the forefront, while the development of non-antibiotic pharmaceuticals is equally significant. In the post-antibiotic era, nanomaterials with high antibacterial efficiency and no drug resistance make them attractive candidates for antibacterial materials. Carbon dots (CDs), as a kind of carbon-based zero-dimensional nanomaterial, are attracting much attention for their multifunctional properties. The abundant surface states, tunable photoexcited states, and excellent photo-electron transfer properties make sterilization of CDs feasible and are gradually emerging in the antibacterial field. This review provides comprehensive insights into the recent development of CDs in the antibacterial field. The topics include mechanisms, design, and optimization processes, and their potential practical applications are also highlighted, such as treatment of bacterial infections, against bacterial biofilms, antibacterial surfaces, food preservation, and bacteria imaging and detection. Meanwhile, the challenges and outlook of CDs in the antibacterial field are discussed and proposed.

Waste-Derived Sustainable Fluorescent Nanocarbon-Coated Breathable Functional Fabric for Antioxidant and Antimicrobial Applications

Hospital-acquired (nosocomial) infections account for the majority of adverse health effects during care delivery, placing an immense financial strain on healthcare systems around the world. For the first time, the present article provides evidence of a straightforward pollution-free technique to fabricate a heteroatom-doped carbon dot immobilized fluorescent biopolymer composite for the development of functional textiles with antioxidant and antimicrobial properties. A simple, facile, and eco-friendly approach was devised to prepare heteroatom-doped carbon dots from waste green tea and a biopolymer. The carbon dots showed an excitation-dependent emission behavior, and the XPS data unveiled that they are co-doped with nitrogen and sulfur. A facile physical compounding strategy was adopted to fabricate a carbon dot reinforced biopolymeric composite followed by immobilization onto the textile. The composite textiles revealed excellent antioxidant activity, determined by 1,1-diphenyl-2-picrylhydrazyl (>80%) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid assays (>90%). The results of the disc diffusion assay indicated that the composite textiles substantially inhibited the growth of both tested bacteria Escherichia coli and Bacillus subtilis with increasing coating cycles. The time-dependent antibacterial experiments revealed that the nanocomposite can inhibit significant bacterial growth within a few hours. The present study could open up the possibility for the commercialization of inexpensive smart textile substrates for the prevention of microbial contamination used for the medical and healthcare field.

Green-derived carbon dots: A potent tool for biosensing in food safety

The impact of food contaminants on ecosystems and human health has attracted widespread global attention, and there is an urgent need to develop reliable food safety detection methods. Recently, carbon dots (CDs) have been considered as a powerful material to construct sensors for chemical analysis. Based on the concept of resource conversion and sustainable development, the use of natural, harmless, and renewable materials for the preparation of CDs without the involvement of chemical hazards is a current hot topic. This paper reviews the research progress of green-derived CDs and their application in food safety biosensing. The fabrications of green-derived CDs using various biomasses are described in detail, and the application of CDs especially the sensing mechanisms of photoluminescence, colorimetric, electrochemiluminescence and other sensors are provided. Finally, existing shortcomings and current challenges as well as prospects for food safety monitoring are discussed. We believe that this work provides strong insight into the application of CDs in the sensing of various contaminants.

Recent advances in green carbon dots (2015-2022): synthesis, metal ion sensing, and biological applications

Carbon dots (CDs) show extensive potential in various fields such as sensing, bioimaging, catalysis, medicine, optoelectronics, and drug delivery due to their unique properties, that is, low cytotoxicity, cytocompatibility, water-solubility, multicolor wavelength tuned emission, photo-stability, easy modification, strong chemical inertness, etc. This review article especially focuses on the recent advancement (2015-2022) in the green synthesis of CDs, their application in metal ions sensing and microbial bioimaging, detection, and viability studies as well as their applications in pathogenic control and plant growth promotion.

Carbon dot-based therapeutics for combating drug-resistant bacteria and biofilm infections in food preservation

Drug-resistant bacteria are caused by antibiotic abuse and/or biofilm formation and have become a threat to the food industry. Carbon dot (CD)-based nanomaterials are a very promising tools for combating pathogenic and spoilage bacteria, and they possess exceptional and adjustable photoelectric and chemical properties. In view of the rapid development of CD-based nanomaterials and their increasing popularity in the food industry, a comprehensive and updated review is needed to summarize their antimicrobial mechanisms and applications in foods. This review discusses the synthesis of CDs, antimicrobial mechanisms, and their applications for extending the shelf life of food. It includes the synthesis of CDs using small molecules, polymers, and biomass. It also discusses the different antimicrobial mechanisms of CDs and their use as antibacterial agents and carriers/ligands. CD-based materials have proven effective against pathogenic and spoilage bacteria in food by inhibiting planktonic bacteria and biofilms. Optimization of the production parameters of CDs can help them achieve a full-spectral response, but degradability still requires further research.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.