Thermoresponsive multicolor-emissive materials based on solid lipid nanoparticles

Expanding the Color Range of Photoresponsive Multicolor Luminescent System Through Host-Guest Interaction

Photoresponsive multicolor luminescent systems offer interesting functions, which have led to applications in anticounterfeiting and biological imaging. However, expanding the color range of these materials remains a challenging task. Herein, a carbazole-modified dithienylethene derivative (DTE-CZ) that exhibits modulated fluorescence color changes through the photocyclization reaction and photolysis reaction is synthesized. DTE-CZ emits orange fluorescence, and it can release a fluorophore which emits blue fluorescence by the photolysis reaction, resulting in the color change. Upon complexation of DTE-CZ with cucurbit[10]uril (CB[10]), the fluorescence wavelength will have a blue shift and the photolysis reaction will be inhibited. Benefiting from the influence of CB[10] and the photolysis reaction of free guests, the color range of the photoresponsive system which is composed of free guests and host-guest complexes is further extended. White light emission along with a color shift from yellow-green to blue was achieved by adjusting the ratio of free guests to host-guest complexes. Finally, the photoresponsive multicolor systems are utilized to construct a photostimulated PVA film and an information encryption system. This work provides an alternative strategy for the preparing of photoresponsive multicolor luminescent system and modulation of its color range.

Achieving Controllable Thermochromic Fluorescence via Synergistic Intramolecular Charge Transfer and Molecular Packing

Thermochromic fluorescent materials (TFMs) have attracted significant attention due to their unique fluorescent colorimetric response to temperature. However, existing TFMs still suffer from weak stimulus responsiveness, broad temperature response ranges, uncontrollable emission color changes, and low quantum yields. In this study, we address these issues by designing and synthesizing three diketone-boron complexes with distinct emission wavelengths (NWPU-(2-4)). Utilizing a molecular engineering strategy to manipulate intramolecular charge transfer transitions and molecular packing modes, our synthesized complexes exhibit efficient fluorescence emission in both solution and solid states. Moreover, their emission wavelengths are highly sensitive to environmental polarity. By incorporating these compounds into thermosensitive matrices of long-chain alkanes, we produced TFMs with varied fluorescence emission peak variation ranges. Notably, the TFM based on NWPU-4, owing to its strong charge transfer transitions and dense J-aggregate packing configuration, not only exhibits intense fluorescence emission spanning the deep red to near-infrared spectrum but also displays a remarkable 90 nm broad range of thermochromic properties. Ultimately, it was successfully applied to programmable, thermally controlled, multi-level information encryption.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Visualizing temperature inhomogeneity using thermo-responsive smart materials

Despite the substantial progress made, the responsiveness of thermo-responsive materials upon various thermal fields is still restricted to monochromatic visualization with single-wavelength light emission. This stems from a poor understanding of the photophysical processes within the materials and the unvarying optical performance of luminescent centers' response to various ambient temperatures. Conventional techniques to assess the inhomogeneities of thermal fields can be time-consuming, require specialized equipment and suffer from inaccuracy due to the inevitable interference from background signals, especially at high temperature. To this end, we overcome these limitations for the first time, to flexibly visualize temperature inhomogeneities by developing a thermochromic smart material, SrGa12-xAlxO19:Dy3+. Two distinct modes of thermochromic properties (steady-state temperature-dependent luminescence and thermally stimulated luminescence) are investigated. It is revealed that the abundant colors (from yellow, green to red) and amazing color-changing features are due to the superior optical integration of the host (SrGa12-xAlxO19) and dopant (Dy3+) emissions under specific thermal stimulations. We suggest that this thermo-responsive smart material can be used to realize highly efficient and simple visualization of invisible thermal distribution in industry and beyond.

An ultra-sensitive ratiometric fluorescent thermometer based on monomer and excimer dual emission

By leveraging natural saturated fatty acids with distinct melting points and swift reversible phase transitions, we correlated external thermal cues to monomer and excimer emissions of difluoroboron β-diketonate fluorophores. This integration yielded a ratiometric fluorescent thermometer showcasing unparalleled sensitivity and thermochromism in the physiological temperature range.

A General Strategy for Developing Ultrasensitive "Transistor-Like" Thermochromic Fluorescent Materials for Multilevel Information Encryption

Thermochromic fluorescent materials (TFMs) exhibit great potential in information encryption applications but are limited by low thermosensitivity, poor color tunability, and a wide temperature-responsive range. Herein, a novel strategy for constructing highly sensitive TFMs with tunable emission (450-650 nm) toward multilevel information encryption is proposed, which employs polarity-sensitive fluorophores with donor-acceptor-donor (D-A-D) type structures as emitters and long-chain alkanes as thermosensitive loading matrixes. The structure-function relationships between the performance of TFMs and the structures of both fluorescent emitters and phase-change molecules are systematically studied. Benefiting from the above design, the obtained TFMs exhibit over 9500-fold fluorescence enhancement toward the temperature change, as well as ultrahigh relative temperature sensitivity up to 80% K-1 , which are first confirmed. Thanks to the superior transducing performance, the above-prepared TFMs can be further developed as information-storage platforms within a relatively narrow interval of temperature variation, including temperature-dominated multicolored information display and multilevel information encryption. This work will not only provide a novel perspective for designing superior TFMs for information encryption but also bring inspiration to the design and preparation of other response-switching-type fluorescent probes with ultrahigh conversion efficiency.

Programming Positive Mechanofluorescence in Liquid Crystalline Elastomers

Liquid single crystal elastomers (LSCEs) containing organic fluorophores within their polymeric network are attractive materials to detect forces with simple spectroscopic measurements. Hitherto, all mechanoluminescent LSCEs decrease their emission intensity upon mechanical stimulation; that is, they display negative mechanofluorescence. Such behavior is governed by the mechanically induced approximation of the quenching mesogenic units and the fluorophores. In this work, we propose the integration of fluorescent molecular rotors (FMRs), whose luminescence is not quenched by the mesogens, in LSCEs as a valuable strategy to conceive elastomeric materials programmed with exactly the opposite behavior, i.e., their fluorescence increases upon deformation (positive mechanofluorescence). Specifically, carbazole-indolenine dyes are interesting candidates for this purpose since their luminescence depends mainly on the degree of intramolecular rotation allowed by the local environment. On this basis, the uniaxial deformation of an LSCE, along its anisotropic direction, incorporating such FMRs will place the fluorophores in a more restricted medium, leading to the desired enhanced emission at the macroscale.

Tuning the Photochromism of Spiropyran in Functionalized Nanoporous Silica Nanoparticles for Dynamic Anticounterfeiting Applications

Here, we report a novel invisible ink with different decay times based on thin films with different molar ratios of spiropyran (SP)/Si, which allows the encryption of messages over time. Nanoporous silica has been found to be an excellent substrate to improve the solid photochromism of spiropyran, but the hydroxyl groups of silica have a serious effect on fade speeds. The density of silanol groups in silica has an influence on the switching behavior of spiropyran molecules, as they stabilize the amphiphilic merocyanine isomers and thus slow down the fading process from the open to the closed form. Here, we investigate the solid photochromic behavior of spiropyran by sol-gel modification of the silanol groups and explore its potential application in UV printing and dynamic anticounterfeiting. To extend its applications, spiropyran is embedded in organically modified thin films prepared by the sol-gel method. Notably, by using the different decay times of thin films with different SP/Si molar ratios, time-dependent information encryption can be realized. It provides an initial "false" code, which does not display the required information, and only after a given time will the encrypted data appear.

Water-Stable Upconverting Coordination Polymer Nanoparticles for Transparent Films and Anticounterfeiting Patterns with Air-Stable Upconversion

Photon upconversion (UC) based on triplet-triplet annihilation is a very promising phenomenon with potential application in several areas, though, due to the intrinsic mechanism, the achievement of diffusion-limited solid materials with air-stable UC is still a challenge. Herein, we report UC coordination polymer nanoparticles (CPNs) combining sensitizer and emitter molecules especially designed with alkyl spacers that promote the amorphous character. Beyond the characteristic constraints of crystalline MOFs, amorphous CPNs facilitate high dye density and flexible ratio tunability. To show the universality of the approach, two types of UC-CPNs are reported, exhibiting highly photostable UC in two different visible spectral regions. Given their nanoscale, narrow size distribution, and good chemical/colloidal stability in water, the CPNs were also successfully printed as anticounterfeiting patterns and used to make highly transparent and photostable films for luminescent solar concentrators, both showing air-stable UC.

The Rainbow Arching over the Fluorescent Thienoviologen Mesophases

Thermofluorochromic materials exhibit tunable fluorescence emission on heating or cooling. They are highly desirable for applications ranging from temperature sensing to high-security anti-counterfeiting. Luminescent matrices based on liquid crystals are very promising, particularly those based on liquid crystals with intrinsic fluorescence. However, only a few examples have been reported, suggesting ample margins for development in the field, due to the wide range of fluorophores and supramolecular organizations to be explored. Moreover, thermofluorochromic liquid crystals can be tailored with further functionalities to afford multi-stimuli responsive materials. For the first time, herein we report the thermofluorochromism of thienoviologen liquid crystals, already known to show bulk electrochromism and electrofluorochromism. In particular, we studied their photophysics in the 25 °C-220 °C range and as a function of the length of the N-linear alkyl chains, m (9 ≤ m ≤ 12 C atoms), and the type of anion, X (X = OTs^-, OTf^-, BF₄^-, NTf₂^-). Interestingly, by changing the parameters m, X and T, their fluorescence can be finely tuned in the whole visible spectral range up to the NIR, by switching among different mesophases. Importantly, by fixing the structural parameters m and X, an interesting thermofluorochromism can be achieved for each thienoviologen in a homologous series, leading to a switch of the emitted light from red to green and from white to blue as a consequence of the temperature-induced variation in the supramolecular interactions in the self-assembled phases.

Molecular Conformation Engineering To Achieve Longer and Brighter Deep Red/Near-Infrared Emission in Crystalline State

A series of molecules 1-5 containing the same fluorophore and different alkyl chains are synthesized to reveal the significant effect of molecular conformations on the emission properties. In crystalline state, molecules 1-3 exhibit strong orange emissions with maxima (λ_em) of about 600 nm and quantum yields (Φ_F) of around 60%, while molecules 4 and 5 display much longer emissions to the deep red/near-infrared (NIR) region as well as even higher efficiencies (λ_em = 693 nm, Φ_F = 73% for 4; λ_em = 654 nm, Φ_F = 93% for 5). The largely red-shifted emissions of 4 and 5 as well as the significantly improved Φ_F are very unusual. Furthermore, the Φ_F of 4 and 5 represent the highest values among organic solids with similar deep red/NIR emission wavelengths. On the basis of the experimental measurements and theoretical calculations, the new molecular design of conformation engineering, the impressive emission properties, and the potential NIR fluorescence sensing and lasing applications are comprehensively investigated.