H-Aggregation of Squaraine Dye as Generic Colorimetric Molecules to Detect Cu2

An infrared squaraine dye was utilized to detect Cu2+ in solvents based on H-aggregates of squaraine dye. H-aggregates are a type of aggregation with enhanced photophysical properties compared to monomers. In the presence of a Ca2+ solution, F-Cl offers exceptional H-aggregators that can be transformed into monomers by adding Cu2+. Furthermore, this mode successfully demonstrated fluorescence changes in HeLa cells cultured in vitro after the addition of Ca2+ or Cu2+. A highly specific detection of Cu2+ was achieved using this transformation mode.

Correlation in Structural Architecture toward Fabrication of Schottky Device with a Series of Pyrazine Appended Coordination Polymers

Energy is the center of importance for the survivability of civilization. Use of fossil fuel is going to be suspended, and renewable energy is technologically costlier. In the quest for new energy sources and to minimize fuel expenditure, the design of energy efficient devices is one of the solutions. Toward this objective, highly delocalized π-acidic N-hetreocycle pyrazine bridged Cd(II)-based coordination polymers (CPs), [Cd(tppz)(adc)(MeOH)] (1), [Cd(tppz)(trep)] (2), and [Cd(tppz)(2,6-ndc)] (3; tppz = 2,3,5,6-tetrakis(2-pyridyl)pyrazine) are synthesized in combination with π-accessible dicarboxylato linkers (acetylene dicarboxylic acid (H2adc), terephthalic acid (H2trep), and 2,6-naphthalene dicarboxylic acid (2,6 H2ndc)). The structures of the compounds, 1-3, have been confirmed by single-crystal X-ray diffraction measurements. Analysis of electrical property demonstrates that light irradiation enhances the conductivity and follows the order 3 > 2 > 1; compound 3 possesses the highest conductivity (1.93 × 10-3 (light), 1.12 × 10-4 S m-1 dark)), than 2 (1.80 × 10-4 (light), 1.10 × 10-4 S m-1 (dark)) and 1 (5.06 × 10-5 (light), 4.72 × 10-5 S m-1 (dark)). This light-induced electrical conductivity can pave the way toward fabrication of an active electronic device by using the discussed materials.

Aminoisophthalate Bridged Cd(II)-2D Coordination Polymer: Structure Description, Selective Detection of Pd2+ in Aqueous Medium, and Fabrication of Schottky Diode

Photoluminescence activity of coordination polymers (CPs) has evoked intricate applications in the field of materials science, especially sensing of ions/molecules. In the present study, 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) and 5-aminoisophthalate (HAIPA^-) coordinated to Cd(II) to architect a coordination polymer, {[Cd(HAIPA)(tppz)(OH)]·3H₂O}_n (CP1) which unveils blue emission in an aqueous acetonitrile (98% aqueous) suspension. The emission is selectively quenched by Pd²⁺ only without interference in the presence of as many as 16 other cations. The structure of CP1 shows the presence of a free -COOH group, and the interlayer (-CO)O(2)···O(7) (OC-) distance, 4.242 Å, along with the π···π interactions (3.990, 3.927 Å), may make a cavity which suitably accommodates only Pd²⁺ (van der Waal's radius, 1.7 Å) through the Pd(II)-carboxylato (-COO-Pd) coordination. The stability of the composite, [CP1 + Pd²⁺] may be assessed from the fluorescence quenching experiment, and the Stern-Volmer constant (K_SV) is 7.2 × 10⁴ M^-1. Therefore, the compound, CP1, is a promising sensor for Pd(II) in a selective manner with limit of detection (LOD), 0.08 μM. The XPS spectra of CP1 and [CP1 + Pd²⁺] have proven the presence of Pd²⁺ in the host and the existence of a coordinated -COO-Pd bond. Interestingly, inclusion of Pd²⁺ in CP1 decreases the band gap from 3.61 eV (CP1) to 3.05 eV ([CP1 + Pd²⁺]) which lies in the semiconducting region and has exhibited improved electrical conductivity from 7.42 × 10^-5 (CP1) to 1.20 × 10^-4 S m^-1 ([CP1 + Pd²⁺]). Upon light irradiation, the electrical conductivities are enhanced to 1.45 × 10^-4 S m^-1 (CP1) and 3.81 × 10^-4 S m^-1 ([CP1 + Pd²⁺]); which validates the highly desired photoresponsive device applications. Therefore, such type of materials may serve as SDG-army (sustainable development goal) to battle against the environmental issues and energy crisis.

Spectrophotometric Determination of Trace Amount of Total FeII/FeIII and Live Cell Imaging of a Carboxylato Zn(II) Coordination Polymer

The coordination polymer, (Zn(II)-CP, 1), {[Zn(2,6-NDC)(4-Cltpy)](H₂O)₄} (1) (2,6-H₂NDC = 2,6-naphthalene dicarboxylic acid and 4-Cltpy = 4'-chloro-[2,2';6',2″]terpyridine) is structurally characterized by single crystal X-ray diffraction measurement and other physicochemical studies (PXRD, FTIR, thermal analysis, microanalytical data). 4-Cltpy acts as end-capping ligand, and NDC^2- is a carboxylato bridging motif to constitute ZnN₃O₂ distorted trigonal bipyramid core that propagates to construct 1D chain. The coordination polymer, 1, detects total iron (Fe³⁺ and Fe²⁺) in aqueous solution by visual color change, colorless to pink. Absorption spectrophotometric technique in aqueous medium measures the limit of detection (LOD) 0.11 μM (Fe²⁺) and 0.15 μM (Fe³⁺), and binding constants (K_d) are 6.7 × 10⁴ M^-1 (Fe³⁺) and 3.33 × 10⁴ M^-1 (Fe²⁺). Biocompatibility of 1 is examined in live cells, and intracellular Fe²⁺ and Fe³⁺ are detected in MDA-MB 231 cells. Zn(II) substitution is assumed upon addition of Fe^III/Fe^II solution to the suspension of the coordination polymer, 1, in water-acetonitrile (41:1) (LZn^II + Fe^III/II → LFe^III + Zn^II, where L is defined as coordinated ligands), which is accompanied by changing from colorless to pink at room temperature. The color of the mixture may be assumed to the charge transfer transition from carboxylate-O to Cltpy via Fe(II/III) bridging center (carboxylate-O-Fe-CltPy). The product isolated from the reaction is finally characterized as Fe(III)@1-CP. It is presumed that product Fe(II)@1-CP may undergo fast aerial oxidation to transform Fe(III)@1-CP. The Fe^III exchanged framework (Fe(III)@1-CP) has been characterized by PXRD, IR, TGA and energy dispersive X-ray analysis (EDX)-SEM. The MTT assay calculates the cell viability (%), and the tolerance limit is 100 μM to total Fe²⁺ and Fe³⁺.

Stimuli-Responsive Zinc (II) Coordination Polymers: A Novel Platform for Supramolecular Chromic Smart Tools

The unique role of the zinc (II) cation prompted us to cut a cross-section of the large and complex topic of the stimuli-responsive coordination polymers (CPs). Due to its flexible coordination environment and geometries, easiness of coordination-decoordination equilibria, "optically innocent" ability to "clip" the ligands in emissive architectures, non-toxicity and sustainability, the zinc (II) cation is a good candidate for building supramolecular smart tools. The review summarizes the recent achievements of zinc-based CPs as stimuli-responsive materials able to provide a chromic response. An overview of the past five years has been organised, encompassing 1, 2 and 3D responsive zinc-based CPs; specifically zinc-based metallorganic frameworks and zinc-based nanosized polymeric probes. The most relevant examples were collected following a consequential and progressive approach, referring to the structure-responsiveness relationship, the sensing mechanisms, the analytes and/or parameters detected. Finally, applications of highly bioengineered Zn-CPs for advanced imaging technique have been discussed.