Lewis Acid-Mediated Isothiocyanation and Chlorination of Quinoxalin-2(1H)-ones under Visible Light Conditions

Lewis acid-mediated selective C3-isothiocyanation of quinoxalin-2(1H)-ones using N-thiocyanatosaccharin as an isothiocyanate source under visible light conditions at room temperature is described. Under similar conditions with N-chlorosaccharin, the C3-chlorination of quinoxalin-2(1H)-ones achieved a 2 h time frame. Good to an excellent yield of products was obtained in both cases with broad functional group tolerance. Control experiments suggest that the reaction proceeds through a radical mechanism. The present procedure demonstrates the applicability at gram-scale reactions and highlights the subsequent conversion of isothiocyanates into representative thiourea derivatives, and one of the chloro derivatives transformed to glycogen phosphorylase inhibitors.

Metal- and photocatalyst-free approach to visible-light-induced acylation of quinoxalinones

A transition-metal- and photocatalyst-free photochemical reaction was successfully developed for the direct acylation of quinoxalin-2(1H)-ones, which was enabled by the formation of electron donor-acceptor (EDA) complexes. The use of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the electron donor allows efficient and operationally simple access to a series of C3-aroylated and acylated quinoxalin-2(1H)-ones with moderate to good yields.

Redox Relay-Induced C-S Radical Cross-Coupling Strategy: Application in Nontraditional Site-Selective Thiocyanation of Quinoxalinones

Oxidative cross-coupling is a powerful strategy to form C-heteroatom bonds. However, oxidative cross-coupling for constructing C-S bond is still a challenge due to sulfur overoxidation and poisoning transition-metal catalysts. Now, electrochemical redox relay using sulfur radicals formed in situ from inorganic sulfur source offers a solution to this problem. Herein, electrochemical redox relay-induced C-S radical cross-coupling of quinoxalinones and ammonium thiocyanate with bromine anion as mediator is presented. The electrochemical redox relay comprised initially the formation of sulfur radical via indirect electrochemical oxidation, simultaneous electrochemical reduction of the imine bond, electro-oxidation-triggered radical coupling involving dearomatization-rearomatization, and the reformation of the imine bond through anodic oxidation. Applying this strategy, various quinoxalinones bearing multifarious electron-deficient/-rich substituents at different positions were well compatible with moderate to excellent yields and good steric hindrance compatibility under constant current conditions in an undivided cell without transition-metal catalysts and additional redox reagents. Synthetic applications of this methodology were demonstrated through gram-scale preparation and follow-up transformation. Notably, such a unique strategy may offer new opportunities for the development of new quinoxalinone-core leads.

Efficient synthesis of SCF3-containing 3-alkenylquinoxalinones via three-component radical cascade reaction

An efficient and practical method for the synthesis of 3-alkenylquinoxalinones containing the SCF3 group has been readily developed through a three-component radical cascade reaction involving quinoxalinones, alkynes and AgSCF3. The reaction was found to be compatible with a variety of substrates and exhibited a high functional group tolerance and complete E-selectivity. The preliminary study suggests the involvement of a SCF3 radical in the transformation.

Pushing Boundaries: What's Next in Metal-Free C-H Functionalization for Sulfenylation?

The synthesis of thioether derivatives has been explored widely due to the potential application of these derivatives in medicinal chemistry, pharmaceutical industry and material chemistry. Within this context, there has been an increasing demand for the environmentally benign construction of C-S bonds via C-H functionalization under metal-free conditions. In the present article, we highlight recent developments in metal-free sulfenylation that have occurred in the past three years. The synthesis of organosulfur compounds via a metal-free approach using a variety of sulfur sources, including thiophenols, disulfides, sulfonyl hydrazides, sulfonyl chlorides, elemental sulfur and sulfinates, is discussed. Non-conventional strategies, which refer to the development of thioether derivatives under visible light and electrochemically mediated conditions, are also discussed. The key advantages of the reviewed methodologies include broad substrate scope and high reaction yields under environmentally benign conditions. This comprehensive review will provide chemists with a synthetic tool that will facilitate further development in this field.

Metal- and Photocatalyst-Free, Visible-Light-Initiated C3 α-Aminomethylation of Quinoxalin-2(1H)-ones via Electron Donor-Acceptor Complexes

We report a metal- and photocatalyst-free C3 α-aminomethylation of quinoxalin-2(1H)-ones with N-alkyl-N-methylanilines. The reaction proceeds through the formation of a photoactivated electron donor-acceptor complex between quinoxalin-2(1H)-ones and N-alkyl-N-methylanilines. The present method provides a mild and environmentally friendly protocol that exhibits good atom economy and excellent functional group tolerance to obtain a library of biologically significant C3 α-aminomethylated quinoxalin-2(1H)-ones in good yields.

Electro-organic synthesis of C-5 sulfenylated amino uracils: Optimization and exploring topoisomerase-I based anti-cancer profile

Cancer is spreading worldwide and is one of the leading causes of death. The use of existing chemotherapeutic agents is frequently limited due to side effects. As a result, it is critical to investigate new agents for cancer treatment. In this context, we developed an electrochemical method for the synthesis of a series of thiol-linked pyrimidine derivatives (3a-3p) and explored their anti-cancer potential. The biological profile of the synthesized compounds was evaluated against breast (MDAMB-231 and MCF-7) and colorectal (HCT-116) cancer cell lines. 3b and 3d emerged to be the most potent agents, with IC50 values ranging between 0.98 to 2.45 µM. Target delineation studies followed by secondary anticancer parameters were evaluated for most potent compounds, 3b and 3d. The analysis revealed compounds possess DNA intercalation potential and selective inhibition towards human topoisomerase (hTopo1). The analysis was further corroborated by DNA binding studies and in silico-based molecular modeling studies that validated the intercalating binding mode between the compounds and the DNA.

A visible-light-mediated cascade reaction of quinoxalin-2(1H)-ones, alkenes, and sulfinic acids

A photocatalytic three-component cascade reaction of quinoxalin-2(1H)-ones, alkenes, and sulfinic acids under metal-, strong oxidant-, and external photocatalyst-free conditions was developed. The reaction was performed at room temperature using air as a green oxidant. Various sulfonated quinoxalin-2(1H)-ones were obtained in satisfactory yields with good functional group compatibility. The preliminary study showed that the current transformation was enabled by the formation of an electron donor-acceptor (EDA) complex between quinoxalin-2(1H)-ones and sulfinic acids.

Recent Developments in Direct C–H Functionalization of Quinoxalin-2(1H)-Ones via Multi-Component Tandem Reactions

The direct C–H multifunctionalization of quinoxalin-2(1H)-ones via multicomponent reactions has attracted considerable interest due to their diverse biological activities and chemical profile. This review will focus on recent achievements. It mainly covers reaction methods for the simultaneous introduction of C–C bonds and C–RF/C/O/N/Cl/S/D bonds into quinoxalin-2(1H)-ones and their reaction mechanisms. Meanwhile, future developments of multi-component reactions of quinoxalin-2(1H)-ones are envisaged, such as the simultaneous construction of C–C and C–B/SI/P/F/I/SE bonds through multi-component reactions; the construction of fused ring and macrocyclic compounds; asymmetric synthesis; green chemistry; bionic structures and other fields. The aim is to enrich the methods for the reaction of quinoxalin-2(1H)-ones at the C3 position, which have rich applications in materials chemistry and pharmaceutical pharmacology.

Selectfluor-Mediated Regioselective C-3 Alkoxylation, Amination, Sulfenylation, and Selenylation of Quinoxalin-2(1H)-ones

A Selectfluor-promoted oxidative coupling of quinoxalin-2(1H)-ones with alcohols, amines, thiols, and selenols leading to the formation of C-O, C-N, C-S, and C-Se bonds has been developed. The protocol provided good to excellent (53-95%) yields of a wide range of quinoxalin-2(1H)-ones decorated with alkoxy, alkylamino, alkylthio, and arylselenyl groups at the C3-position under metal- and photocatalyst-free conditions. The reaction is believed to proceed through a radical pathway. A broad substrate scope including bioactive molecules, mild reaction conditions, readily available coupling partners, high yields, scalability, step-economy, and metal- and photocatalyst-free conditions are the highlighting features of the method. The synthetic utility of the developed protocol was demonstrated by gram-scale synthesis, C3-alkoxylation of quinoxaline-2(1H)-one with natural alcohols, and synthesis of aldose reductase (ALR2) inhibitor and histamine-4 receptor antagonist in good yields.

Electrosynthetic C-O Bond Activation in Alcohols and Alcohol Derivatives

Alcohols and their derivatives are ubiquitous and versatile motifs in organic synthesis. Deoxygenative transformations of these compounds are often challenging due to the thermodynamic penalty associated with the cleavage of the C-O bond. However, electrochemically driven redox events have been shown to facilitate the C-O bond cleavage in alcohols and their derivatives either through direct electron transfer or through the use of electron transfer mediators and electroactive catalysts. Herein, a comprehensive overview of preparative electrochemically mediated protocols for C-O bond activation and functionalization is detailed, including direct and indirect electrosynthetic methods, as well as photoelectrochemical strategies.

Acid-Promoted Direct C-H Carbamoylation at the C-3 Position of Quinoxalin-2(1H)-ones with Isocyanide in Water

Described herein is a concise and practical direct amidation at the C-3 position of quinoxalin-2(1H)-ones through an acid-promoted carbamoylation with isocyanide in water. In this conversion, environmentally friendly water and commercial inexpensive isocyanide were used as a solvent and carbamoylation reagent, respectively. This study not only provides a green and efficient strategy for the construction of 3-carbamoylquinoxalin-2(1H)-one derivatives that can be applied to the synthesis of druglike structures but also expands the application of isocyanide in organic chemistry.

Visible-Light Promoted Regioselective Oxygenation of Quinoxalin-2(1H)-ones Using O2 as an Oxidant

A visible-light-mediated sustainable approach for metal-free oxygenation of quinoxalin-2(1H)-one by employing Mes-Acr-MeClO₄ as a photocatalyst without using any additive or cocatalyst is reported here. O₂ served as the eco-friendly and green oxidant source for this conversion. In addition, the protocol exhibited high regioselectivity and tolerance toward a broad spectrum of functional groups to furnish quinoxaline-2,3-diones in good to excellent yields.

Sunlight Induced and Recyclable g-C3N4 Catalyzed C-H Sulfenylation of Quinoxalin-2(1H)-Ones

A sunlight-promoted sulfenylation of quinoxalin-2(1H)-ones using recyclable graphitic carbon nitride (g-C₃N₄) as a heterogeneous photocatalyst was developed. Using the method, various 3-sulfenylated quinoxalin-2(1H)-ones were obtained in good to excellent yields under an ambient air atmosphere. Moreover, the heterogeneous catalyst can be recycled at least six times without significant loss of activity.

A covalent organic framework-catalyzed visible-light-induced three-component cascade synthesis of trifluoroalkyl and trifluoroalkenyl quinoxalin-2(1H)-one derivatives

A COF-catalyzed visible-light-induced three-component synthesis of trifluoroalkyl and trifluoroalkenyl quinoxalin-2(1H)-one derivatives features robust substrate adaptability, good sustainability, and Z-selectivity.

Catalytic selective oxidation of aromatic amines to azoxy derivatives with an ultralow loading of peroxoniobate salts

Tartaric acid-coordinated peroxoniobate salts demonstrate an exceptionally high TOF value (up to 4435 h−1) even at an ultralow catalyst loading for the oxidation of aromatic amines to azoxy compounds under green and very mild conditions.