Atomic Ni and Cu co-anchored 3D nanoporous graphene as an efficient oxygen reduction electrocatalyst for zinc-air batteries

General and Facile Synthesis of Co/CoO Nanoparticals Supported by Nitrogen-Doped Graphenic Networks as Efficient Oxygen Electrocatalyst for Zn-Air Batteries

Reasonable design of low-cost, high-efficiency and stable bifunctional oxygen electrocatalysts is of great significance to improve the reaction efficiency of Zn-air batteries, which is still a huge challenge. Here, we report a highly efficient bifunctional oxygen electrocatalyst with three-dimensional (3D) N-doped graphene network-supported cobalt and cobalt oxide nanoparticles (Co/CoO-NG), which can be in situ synthesized by inducing metal ions on metal plates via graphene oxide as an inducer. This 3D network structure and open active center show excellent bifunctional oxygen electrocatalytic activity under alkaline conditions, and can be used as an air electrode in rechargeable Zn-air batteries, with significantly better power density (244.28 mW cm-2) and stability (over 340 h) than commercial Pt/C+RuO2 mixtures. This work is conducive to advancing the practical application of graphene-based materials as air electrodes for rechargeable zinc-air batteries.

Advances in Transition-Metal-Based Dual-Atom Oxygen Electrocatalysts

Oxygen electrocatalysis has aroused considerable interest over the past years because of the new energy technologies boom in hydrogen energy and metal-air battery. However, due to the sluggish kinetic of the four-electron transfer process in oxygen reduction reaction and oxygen evolution reaction, the electro-catalysts are urgently needed to accelerate the oxygen electrocatalysis. Benefit from the high atom utilization efficiency, unprecedentedly high catalytic activity, and selectivity, single-atom catalysts (SACs) are considered the most promising candidate to replace the traditional Pt-group-metal catalysts. Compared with SACs, the dual-atom catalysts (DACs) are attracting more attraction including higher metal loading, more versatile active sites, and excellent catalytic activity. Therefore, it is essential to explore the new universal methods approaching to the preparation, characterization, and to elucidate the catalytic mechanisms of the DACs. In this review, several general synthetic strategies and structural characterization methods of DACs are introduced and the involved oxygen catalytic mechanisms are discussed. Moreover, the state-of-the-art electrocatalytic applications including fuel cells, metal-air batteries, and water splitting have been sorted out at present. The authors hope this review has given some insights and inspiration to the researches about DACs in electro-catalysis.

Cu-based catalysts with the co-existence of single atoms and nanoparticles for basic electrocatalytic oxygen reduction reaction

Developing efficient and stable oxygen reduction reaction (ORR) catalysts to replace the precious Pt/C is very important for the industrial application of proton-exchange membrane fuel cells. Herein, using bismuth-based metal-organic frameworks as the substrate to disperse copper ions, we prepared a catalyst containing both Cu single atoms and Cu nanoparticles (CuSACuNP/BiCN) by a pyrolysis method. In 0.1 M KOH electrolyte, the electrocatalytic ORR performance of CuSACuNP/BiCN was superior to that of commercial Pt/C. With a hierarchical porous architecture, CuSACuNP/BiCN displayed a half-wave potential of 0.86 V vs. RHE and a diffusion-limiting current density of 5.82 mA cm-2 with a four-electron transfer process. In addition, it was stable during a 12-hour durability test. This study provides guidance for the synthesis of advanced Cu-based nano-single-atom catalytic materials for ORR applications.

Insight into the Mechanism for Catalytic Activity of the Oxygen/Hydrogen Evolution Reaction on a Dual-Site Catalyst

The dual-site catalysts consisting of two adjacent single-atom sites on graphene have exhibited promising catalytic activity of the electrochemical oxygen/hydrogen evolution reaction (OER/HER). However, the electrochemical mechanisms of the OER/HER on dual-site catalysts have still been ambiguous. In this work, we employed density functional theory calculations to study the catalytic activity of the OER/HER with a O-O (H-H) direct coupling mechanism on dual-site catalysts. Specifically, these element steps should be classified into two categories: a step evolving proton-coupled electron transfer (PCET step) that needs to be driven by electrode potential and a step without PCET (non-PCET step) that occurs naturally under mild conditions. Our calculated results show that both the maximal free energy change (ΔG_Max) contributed by the PCET step and the activity barrier (E_a) of the non-PCET step must be examined to evaluate the catalytic activity of the OER/HER on the dual site. Importantly, it is a basically inevitable negative relationship between ΔG_Max and E_a, which would play a critical role in guiding the rational design of effective dual-site catalysts for electrochemical reactions.

Oxygen Spillover Effect at Cu/Fe2O3 Heterointerfaces to Enhance Oxygen Electrocatalytic Reactions for Rechargeable Zn-Air Batteries

Rational design and synthesis of high-performance electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are critical for practical application of Zn-air batteries (ZABs). In this work, the bifunctional composite Cu-Fe₂O₃/PNC was prepared by a simple and effective wet-hydrothermal coupled dry-annealing synthesis strategy. The Cu-Fe₂O₃/PNC displayed excellent catalytic activity in ORR and OER with a potential difference of 0.63 V. More importantly, the ZAB assembled with Cu-Fe₂O₃/PNC exhibited a high-power density of 138.00 mW cm^-2 and an excellent long-term cyclability. X-ray photoelectron spectroscopy (XPS) demonstrated that the excellent performance is due to the strong electronic interaction between Cu and Fe₂O₃ that arises as a result of the fast electron transfer through the Cu-O-Fe bond and the higher concentration of surface oxygen vacancies. Meanwhile, the spillover factor Bsp/2zF of Cu/PNC and Cu-Fe₂O₃/PNC obtained by the rotating disk experiment was 1.00 × 10^-7 and 1.10 × 10^-7 cm²·s^-1, respectively, indicating that the oxygen spillover effect between Cu and Fe₂O₃ lowers the energy barrier, increases the number of active sites, and alters the rate-determining reaction step. This work demonstrated the significant potential of Cu-Fe₂O₃/PNC in energy conversion and storage applications, providing a new perspective for the rational design of bifunctional electrocatalysts.

3D Continuously Porous Graphene for Energy Applications

Constructing bulk graphene materials with well-reserved 2D properties is essential for device and engineering applications of atomically thick graphene. In this article, the recent progress in the fabrications and applications of sterically continuous porous graphene with designable microstructures, chemistries, and properties for energy storage and conversion are reviewed. Both template-based and template-free methods have been developed to synthesize the 3D continuously porous graphene, which typically has the microstructure reminiscent of pseudo-periodic minimal surfaces. The 3D graphene can well preserve the properties of 2D graphene of being highly conductive, surface abundant, and mechanically robust, together with unique 2D electronic behaviors. Additionally, the bicontinuous porosity and large curvature offer new functionalities, such as rapid mass transport, ample open space, mechanical flexibility, and tunable electric/thermal conductivity. Particularly, the 3D curvature provides a new degree of freedom for tailoring the catalysis and transport properties of graphene. The 3D graphene with those extraordinary properties has shown great promises for a wide range of applications, especially for energy conversion and storage. This article overviews the recent advances made in addressing the challenges of developing 3D continuously porous graphene, the benefits and opportunities of the new materials for energy-related applications, and the remaining challenges that warrant future study.

Different Bonding Defects on Dual-Metal Single-Atom Electrocatalyst CoZnN6(OH) for Oxygen Reduction Reaction

Since dual-metal single-atom catalyst (CoZnN/C) has been experimentally synthesized by atomically arching CoZn on N-doped carbon nanofibers and exhibited potential electrocatalysis activity toward oxygen reduction reaction (ORR), we perform first-principles calculation to identify the high active sites at different defects by comparing the four-step ORR processes on the constructed four CoZnN 6 models on graphene. The corresponding N-edge effect, dopant effect and C-edge ring-closing effect are evaluated with the ORR evolution on different bonding environments, including pristine CoZnN 6 (OH), nanoribbon (NR) along zigzag direction, substitution of oxygen/carbon (C/O substitution), and C-edge ring-closing configurations. OH-ligand is shown to significantly improve the ORR activities for all the considered structures, especially, C-substituted CoZnN 6 (OH), NR-CoZnN 5 O(OH) and CoZnN 6 (OH) with C-edge-effect exhibit obviously reduced overpotentials (h lim = 0.28, 0.48 and 0.41 V) of RDS among all the considered nine candidates. By plotting the relationship between the limiting potentials (U lim ) and free energies of intermediate *OH (DG OH* ), two prior catalysts of pristine-CoZnN 5 C(OH) and defect-CoZnN 6 CH(OH) are located near the top of the volcano curve with higher U lim = 0.95 and 0.82 V than Pt(111) (U lim = 0.80 V), implying that C-substitution could facilitate ORR performance in pristine- and defect-CoZnN 6 (OH) bonding situation.

Fe-ZIF8 Coating Cu Foil Derived Carbon as A pH-universal Electrocatalyst for Efficient Oxygen Reduction Reaction

It is a great challenge to fabricate highly efficient pH-universal electrocatalysts for oxygen reduction reaction (ORR). Herein, a facile strategy, which includes coating the Fe modified ZIF8 on Cu foil and in-situ pyrolysis to evaporate and dope Cu into the MOF derived carbon, is developed to fabricate Fe/Cu-N co-doped carbon material (Cu/Fe-NC). Profiting from the modulated electron distribution and textual properties, well-designed Cu/Fe-NC exhibits superior half-wave potential (E 1/2 ) of 0.923 V in alkaline, 0.757 V in neutral and comparable 0.801 V in acid electrolytes, respectively. Furthermore, the ultralow peroxides yield of ORR demonstrates the high selectivity of Cu/Fe-NC in full pH scale electrolytes. As expected, the self-made alkaline and neutral zinc-air batteries equipped with Cu/Fe-NC cathode display excellent discharge voltages, outstanding peak power densities and remarkable stability. This work opens a new way to fabricate highly efficient and pH-universal electrocatalysts for ORR through strategy of Fe/Cu-N co-doping, Cu foil evaporation and carbon defects capture.