Synthesis and biological properties of novel glucose-based fluoro segmented macromolecular architectures

The emergence of novel well-defined biological macromolecular architectures containing fluorine moieties displaying superior functionalities can satisfactorily address many biomedical challenges. In this research, ABA- and AB-type glucose-based biological macromolecules were synthesized using acryl-2,3,4,6-tetra-O-acetyl-D-glucopyranoside with pentafluorophenyl (FPM), pentafluorobenzyl (FBM), phenyl (PM) and benzyl (BM) methacrylate-based macro-RAFT agents following RAFT polymerization. The macro-RAFT agents and the corresponding copolymers were characterized by 19F, 1H, and 13C NMR and FTIR spectroscopic techniques to understand the chemical structure, molecular weight by size-exclusion chromatography, thermal analysis by TGA and DSC. Thermal stability (Td5%) of the FPM and FBM fluoro-based polymers was observed in the range of 219-267 °C, while the non-fluoro PM and BM polymers exhibited in the range of 216-264 °C. Among the macro-RAFT agents, PFPM (107 °C, ΔH: 0.613 J/g) and PPM (103 °C, ΔH: 0.455 J/g) showed higher Tm values, while among the block copolymers, PFBM-b-PG (123 °C, ΔH: 0.412 J/g) and PG-b-PFPM-b-PG (126 °C, ΔH: 0.525 J/g) exhibited higher Tm values. PFBMT and PPM macro-RAFT agents, PPM-b-PG and PG-b-PPM-b-PG copolymer spin-coated films showed the highest hydrophobicity (120°) among the synthesized polymers. The block copolymers exhibited self-assembled segregation by using relatively hydrophobic segments as the core and hydrophilic moieties as the corona. Synthesized biological macromolecules exhibit maximum antibacterial activity towards S. aureus than E. coli bacteria. Fluorophenyl (PFPM) and non-fluorobenzyl-based (PBMT) macro-RAFT agents exhibit low IC50 values, suggesting high cytotoxicity. All the triblock copolymers exhibit lesser cytotoxicity than the di-block polymers.

Fluorinated Organic Polymers for Cancer Drug Delivery

In the realm of cancer therapy, the spotlight is on nanoscale pharmaceutical delivery systems, especially polymer-based nanoparticles, for their enhanced drug dissolution, extended presence in the bloodstream, and precision targeting achieved via surface engineering. Leveraging the amplified permeation and retention phenomenon, these systems concentrate therapeutic agents within tumor tissues. Nonetheless, the hurdles of systemic toxicity, biological barriers, and compatibility with living systems persist. Fluorinated polymers, distinguished by their chemical idiosyncrasies, are poised for extensive biomedical applications, notably in stabilizing drug metabolism, augmenting lipophilicity, and optimizing bioavailability. Material science heralds the advent of fluorinated polymers that, by integrating fluorine atoms, unveil a suite of drug delivery merits: the hydrophobic traits of fluorinated alkyl chains ward off lipid or protein disruption, the carbon-fluorine bond's stability extends the drug's lifecycle in the system, and a lower alkalinity coupled with a diminished ionic charge bolsters the drug's ability to traverse cellular membranes. This comprehensive review delves into the utilization of fluorinated polymers for oncological pharmacotherapy, elucidating their molecular architecture, synthetic pathways, and functional attributes, alongside an exploration of their empirical strengths and the quandaries they encounter in both experimental and clinical settings.

Chemical Information Processing by a Responsive Chemical System

Nature has an extraordinary capacity to precisely regulate the chemical reactivity in a highly complex mixture of molecules that is present in the cell. External stimuli lead to transient up- and downregulation of chemical reactions and provide a means for a cell to process information arriving from the environment. The development of synthetic chemical systems with life-like properties requires strategies that allow likewise control over chemical reactivity in a complex environment. Here, we show a synthetic system that mimics the initial steps that take place when a natural signal transduction pathway is activated. Monophosphate nucleosides act as chemical triggers for the self-assembly of nanoreactors that upregulate chemical reactions between reagents present at low micromolar concentrations. Different nucleotides template different assemblies and hence activate different pathways, thus establishing a distinct connection between input and output molecules. Trigger-induced upregulation of chemical reactivity occurs for only a limited amount of time because the chemical triggers are gradually removed from the system by enzymes. It is shown that the same system transiently produces different output molecules depending on the chemical input that is provided.

Altering the bio-inert properties of surfaces by fluorinated copolymers of mPEGMA

Hydrophilic materials display "bio-inert properties", meaning that they are less recognized as foreign substances by proteins and cells. Such materials are often water soluble; therefore, one general approach to enable the use of these materials in various applications deals with copolymerizing hydrophilic monomers with hydrophobic ones to facilitate such resulting copolymers water insoluble. However, reducing the hydrophilic monomer amount may reduce the bio-inert properties of the material. The decrease in bio-inert properties can be avoided when small amounts of fluorine are used in copolymers with hydrophilic monomers, as presented in this article. Even in small quantities (7.9 wt%), the fluorinated monomer, 1,1,1,3,3,3-hexafluoropropan-2-yl 2-fluoroacrylate (FAHFiP), contributed to the improved hydrophobicity of the polymers of the long side-chain poly(ethylene glycol) methyl ether methacrylate (mPEGMA) bearing nine ethylene glycol units turning them water insoluble. As evidenced by the AFM deformation image, a phase separation between the FAHFiP and mPEGMA domains was observed. The copolymer with the highest amount of the fluorinated monomer (66.2 wt%) displayed also high (82 %) FAHFiP amount at the polymer-water interface. In contrast, the hydrated sample with the lowest FAHFiP/highest mPEGMA amount was enriched of three times more hydrophilic domains at the polymer-water interface compared to that of the sample with the highest FAHFiP content. Thus, by adding a small FAHFiP amount to mPEGMA copolymers, water insoluble in the bulk too, could be turned highly hydrophilic at the water interface. The high content of intermediate water contributed to their excellent bio-inert properties. Platelet adhesion and fibrinogen adsorption on their surfaces were even more decreased as compared to those on poly(2-methoxyethyl acrylate), which is typically used in medical devices.

Fluorine-Containing Triblock Copolymer Vesicles with Microphase-Separated Structure

Introduction of a fluorine-containing block into block copolymers is an effective method to tune block copolymer nanoassemblies with a microphase-separated structure. However, this microphase-separated structure is difficult to clearly observe due to its nanoscale size. In this work, fluorine-containing ABC triblock copolymer vesicles of poly(ethylene glycol)-block-polystyrene-block-poly(4-vinylbenzyl pentafluorophenyl ether) (PEG-b-PS-b-PVBFP) are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization under dispersed condition. Owing to the choice of a suitable degree of polymerization of the three blocks, the synthesized PEG₄₅-b-PS₁₉₇-b-PVBFP₂₃₃ vesicles have a relatively large size of around 216 nm and a thin vesicular membrane with a thickness of around 28 nm. Ascribed to the relatively large size of the vesicles and the thin vesicular membrane, it is concluded that the fluorine-containing PVBFP block forms 9 nm columnar microdomains shielded by the PS phase in the vesicular membrane.

Hierarchical Self-Assembly of Triphilic Main-Chain-Type Semifluorinated Alternating Graft Copolymers in Aqueous Solution

Fluorinated copolymers can self-assemble in solution and form micelles with rare properties due to the peculiar behavior of fluorinated groups. However, the process description of the self-assembly is still largely phenomenological and difficult to explain due to the tendency of the fluorinated segments to segregate from both the hydrophilic and lipophilic segments, which can result in various morphologies. Herein, the controlled formation of ellipsoidal micelles, disklike micelles, and sheets by hierarchical self-assembly of triphilic main-chain-type semifluorinated alternating graft copolymers (AB)_n A-g-mOEG is presented (where A represents unit of α,ω-diiodoperfluoroalkane, B represents the unit of α,ω-unconjugated diene, and mOEG represents methoxy oligo(ethylene glycol)), which are synthesized by step transfer-addition and radical-termination (START) polymerization and azide-alkyne click chemistry. Furthermore, the possible self-assembly mechanism of these micron-level aggregates is proposed, which is ascribed to the hierarchical self-assembly, crowding effect of hydrophilic chains and the interfacial tension between the fluoroalkane and alkane segments. This study can provide a facile and highly efficient approach to the synthesis of main-chain-type fluorinated graft copolymers and expand the research field for the solution self-assembly of fluorinated copolymers.

RAFT polymerization-induced self-assembly of semifluorinated liquid-crystalline block copolymers

It is a major challenge to prepare commercially viable scale semifluorinated liquid-crystalline block copolymers (SEFL-BCPs) using solution processing techniques. The technology of selectively solvating one block in a suitable solvent to realize self-assembly provides a promising route for the preparation of core-corona block polymer materials with extensive potential applications. However, considerable limitations have been discovered after much practice. BCP assemblies often require a separate synthesis step and are performed at high dilution. Herein, a one-pot approach combining polymerization-induced and crystallization-driven self-assembly (PISA-CDSA) was used to obtain well-defined, precise compositions of SEFL-BCPs. It is first synthesized via reversible addition-fragmentation chain transfer ethanol dispersion polymerization between 1H,1H,2H,2H-heptadecafluorodecyl acrylate and poly(N,N-dimethylacrylamide) at a concentration up to 20% v/v. Various morphologies, including 1D fiber-like micelles, 2D lamellar structures, and fusion structures, were first observed via transmission electron microscopy. This scalable PISA-CDSA strategy is greatly expanding the morphology scope and applicability of the polymer liquid crystal materials science field.

Polymerization-Induced Self-Assembly (PISA) for in situ drug encapsulation or drug conjugation in cancer application

HYPOTHESIS

We describe the possibility of using the same block copolymer carriers prepared by PISA for in situ drug encapsulation or drug conjugation.

EXPERIMENTS

Block copolymers containing poly((ethylene glycol) methacrylate)-co-poly(pentafluorophenyl methacrylate)-b-poly(hydroxypropyl methacrylate) (P((PEGMA-co-PFBMA)-b-PHPMA)) were synthesized at 10 wt% using PISA. The first approach involved in situ Doxorubicin (DOX) loading during PISA, while the second exhibited surface functionalization of PISA-made vesicles with dual drug therapies, N-acetyl cysteine (NAC) and DOX using para-fluoro-thiol reaction (PFTR) and carbodiimide chemistry, respectively. Cytotoxicity, cell uptake, and cell apoptosis were assessed on MDA-MB-231 cell lines.

FINDINGS

P((PEGMA-co-PFBMA)-b-PHPMA) nanocarriers were prepared, showing size and shape transformations from spheres, cylinders to raspberry-forming vesicles. DOX was readily loaded into NPs during PISA with relatively high encapsulation efficiency of 70 %, whereas the plain PISA-made vesicles could be functionalized with NAC and DOX at high yields. DOX-free NPs showed biocompatibility, whilst DOX-conjugated NPs imparted a concentration-dependent cytotoxicity, as well as an enhanced cell uptake compared to free DOX. The results demonstrated that the same PISA-derived self-assemblies enabled either in situ drug encapsulation, or post-polymerization surface engineering with useful functionalities upon tuning the macro-CTA block, thus holding promises for future drug delivery and biomedical applications.

A robust platform to construct molecular patchy particles with a pentiptycene skeleton toward controlled mesoscale structures

A new pentiptycene skeleton with orthogonally reactive sites and inherent D2h-symmetry to construct molecular pathy particles toward mesoscale structures.

Depolymerizable semi-fluorinated polymers for sustainable functional materials

Chemically recyclable semi-fluorinated polymers are demonstrated for the first time, and the hydrophobicity, self-assembly, and post-polymerization functionalization of these polymers are explored.

Semi-Fluorinated Di and Triblock Copolymer Nano-Objects Prepared via RAFT Alcoholic Dispersion Polymerization (PISA)

A set of well-defined amphiphilic, semi-fluorinated di and triblock copolymers were synthesized via polymerization-induced self-assembly (PISA) under alcoholic dispersion polymerization conditions. This study investigates the influence of the length, nature and position of the solvophobic semi-fluorinated block. A poly(N,N-dimethylaminoethyl methacrylate) was used as the stabilizing block to prepare the di and tri block copolymer nano-objects via reversible addition-fragmentation chain transfer (RAFT) controlled dispersion polymerization at 70 °C in ethanol. Benzylmethacrylate (BzMA) and semi-fluorinated methacrylates and acrylates with 7 (heptafluorobutyl methacrylate (HFBMA)), 13 (heneicosafluorododecyl methacrylate (HCFDDMA)) and 21 (tridecafluorooctyl acrylate (TDFOA)) fluorine atoms were used as monomers for the core-forming blocks. The RAFT polymerization of these semi-fluorinated monomers was monitored by SEC and 1H NMR. The evolution of the self-assembled morphologies was investigated by transmission electron microscopy (TEM). The results demonstrate that the order of the blocks and the number of fluorine atoms influence the microphase segregation of the core-forming blocks and the final morphology of the nano-objects.

Recent advances in the preparation of semifluorinated polymers

Synthesis of semifluorinated polymers containing fluorous groups on the backbone or as side chains is an increasingly popular field of research.