Imidazole Cationic-Bridged Pillar[5]arene Polymer as a Recycle Adsorbent for Iodine Capture

Developing efficient and recyclable iodine adsorbents is crucial for addressing radioactive iodine pollution. An imidazole cation-bridged pillar[5]arene polymer (P5-P5I) was synthesized via a salt formation reaction. P5-P5I exhibited a high iodine vapor capture capacity of 2130.0 mg/g and a maximum adsorption capacity of 1935.3 and 942.4 mg/g for I2 and I3- in solution, respectively. The adsorption kinetics of I2 and I3- on P5-P5I in aqueous solution followed a pseudo-second-order kinetic model, reaching adsorption equilibrium within a few minutes. P5-P5I demonstrated the ability to selectively capture I2 and I3- in the presence of competing anions (10-1000-fold), removing over 97.1% of iodine from various environments. Meanwhile, under extreme conditions (strong acids, strong bases, and high temperature), P5-P5I still has a superior adsorption performance and cycling ability for I2 and I3-. Molecular modeling revealed that P5-P5I could synergistically enhance iodine capture through multiple weak interactions, including host-guest, C-H···I hydrogen bond, and electrostatic interactions. This study indicates that P5-P5I has promising applications for rapid and efficient iodine uptake from vapor and various aqueous media.

Porous pillar[6]arene-based polymers for reversible iodine capture

Iodine in nuclear waste can cause serious environment pollution and health risks, and has thus driven more development of materials for iodine capture. Herein, a novel porous pillar[6]arene-based polymer (P-P6APs) was easily prepared as a supramolecular adsorbent for iodine via a one-step crosslinking reaction between per-hydroxylated pillar[6]arene and decafluorobiphenyl. Nitrogen adsorption tests demonstrated that this material possessed a satisfactory surface area (S BET = 366 m2 g-1) and pore diameter (3.8 nm), which was due to the macrocyclic scaffolds. Compared with commercially available activated carbon, P-P6APs exhibited superior adsorption efficiency toward volatile iodine not only in the solution phase (water and n-hexane) but also in the gas phase. This outcome was mainly ascribed to nonspecific adsorption by the pore structure of the crosslinked material coupled with multiple intermolecular binding sites of the macrocyclic scaffold. Moreover, this supramolecular absorbent was recyclable and could be reused 5 times with no obvious loss of performance.

Phenyl-Extended Resorcin[4]arenes: Synthesis and Highly Efficient Iodine Adsorption

The continuous exploration of new analogs of calixarenes and pillararenes unlocks infinite opportunities in supramolecular chemistry and materials. In this work, we introduce a new class of macrocycle, phenyl-extended resorcin[4]arenes (ExR4), a unique and innovative design that incorporates unsubstituted phenylene moieties into the resorcin[4]arene scaffold. Single-crystal analysis reveals a chair-like conformation for per-methylated ExR4 (Me-ExR4) and a twisted "Figure-of-eight" shaped conformation for per-hydroxylated ExR4 (OH-ExR4). Notably, OH-ExR4 demonstrates exceptional adsorption capability toward I3 - ions in an aqueous solution, with a rapid kinetic rate of 1.18×10-2 g ⋅ mg-1 ⋅ min-1. Furthermore, OH-ExR4 shows excellent recyclability and potential as a stationary phase in column setups. The discovery of ExR4 opens up new avenues for constructing new macrocycles and inspires further research in functional adsorption materials for water pollutant removal.

Synthesis of a Novel Zwitterionic Hypercrosslinked Polymer for Highly Efficient Iodine Capture from Water

Cationic porous organic polymers have a unique advantage in removing radioactive iodine from the aqueous phase because iodine molecules exist mainly in the form of iodine-containing anions. However, halogen anions will inevitably be released into water during the ion-exchange process. Herein, we reported a novel and easy-to-construct zwitterionic hypercrosslinked polymer (7AIn-PiP)-containing cationic pyridinium-type group, uncharged pyridine-type group, pyrrole-type group, and even an electron-rich phenyl group, which in synergy effectively removed 94.2% (456 nm) of I2 from saturated I2 aqueous solution within 30 min, surpassing many reported iodine adsorbents. Moreover, an I2 adsorption efficiency of ~95% can still be achieved after three cyclic evaluations, indicating a good recycling performance. More importantly, a unique dual 1,3-dipole was obtained and characterized by 1H/13C NMR, HRMS, and FTIR, correlating with the structure of 7AIn-PiP. In addition, the analysis of adsorption kinetics and the characterization of I2@7AIn-PiP indicate that the multiple binding sites simultaneously contribute to the high affinity towards iodine species by both physisorption and chemisorption. Furthermore, an interesting phenomenon of inducing the formation of HIO2 in unsaturated I2 aqueous solution was discovered and explained. Overall, this work is of great significance for both material and radiation protection science.

Effect of different initiators on the properties of diacetone acrylamide grafted starch-based adhesive

Environmentally friendly and non-toxic bio-based adhesives are emerging as the most promising substitutes for petroleum-based adhesives, attracting increasing attention. This work involved the synthesis of a starch-based adhesive for particleboards by grafting diacetone acrylamide (DAAM) onto starch. The graft polymerization was initiated using three different initiators: ammonium persulfate (APS), hydrogen peroxide (H2O2)/ammonium ferrous sulfate system, and ceric ammonium nitrate (CAN). A comparative study was conducted to assess the varying effects of these initiators. The results showed that in the graft copolymerization of starch with DAAM, different initiators produced different types of free radicals, and CAN initiation produced alkyl radicals and long-chain alkyl radicals with a peak total spin value of 3.96 × 1015, and thus had the highest grafting efficiency and grafting rate of 72.59 % and 16.75 %, respectively. From the comparison of the total number of spins, it can be seen that CAN is more targeted for starch initiation. In addition, characterization results from Fourier transform infrared spectroscopy and confocal Raman spectroscopy showed that DAAM underwent a graft copolymerization reaction with starch. Notably, the adhesive initiated by CAN demonstrated the highest water resistance and mechanical strength, with an absorption thickness expansion and static bending strength of 8.52 % and 10.56 MPa, respectively.

A Cucurbit[8]uril-Based Supramolecular Framework Material for Reversible Iodine Capture in the Vapor Phase and Solution

The safe and efficient management of hazardous radioactive iodine is significant for nuclear waste reprocessing and environmental industries. A novel supramolecular framework compound based on cucurbit[8]uril (Q[8]) and 4-aminopyridine (4-AP) is reported in this paper. In the single crystal structure of Q[8]-(4-AP), two 4-AP molecules interact with the outer surface of Q[8] and the two other 4-AP molecules are encapsulated into the Q[8] cavity to form the self-assembly Q[8]-(4-AP). Iodine adsorption experiments show that the as-prepared Q[8]-(4-AP) not only has a high adsorption capacity (1.74 g· g-1) for iodine vapor but also can remove the iodine in the organic solvent and the aqueous solution with the removal efficiencies of 95% and 91%, respectively. The presence of a large number of hydrogen bonds between the iodine molecule and the absorbent, as seen in the single crystal structure of iodine-loaded Q[8]-(4-AP) (I2@Q[8]-(4-AP)), is thought to be responsible for the exceptional iodine adsorption capacity of the material. In addition, the adsorption-desorption tests reveal that the self-assembly material has no significant loss of iodine capture capacity after five cycles, indicating that it has sufficient reusability.

Water-soluble Pillar[5]arene-based drug candidates for lung and breast cancer

The objective of research was to examine the likely anticancer effectiveness of distinct pillar[5] arene derivatives, ws-penta-P[5] and ws-deca-P[5], on breast and lung cancer cell lines in vitro. To achieve this goal, breast cancer (MCF7) cells, lung cancer (A549) cells, healthy cells (HEK293) were utilized. The IC50 dose of ws-penta-P[5] and ws-deca-P[5] was determined using the MTT method. Both treatment (pillar[5] arene applied) and control (pillar[5] arene not applied) groups were established for all three cell lines. Real-time polymerase chain reaction (qPCR) was used to evaluate changes in gene expression following pillar[5] arene treatment. Flow cytometry analysis was used to determine apoptosis and cell cycle arrest. The treatment group and control group results were compared after the study. The results revealed that in both cell lines treated with ws-deca-P[5], proapoptotic gene expressions were upregulated, while antiapoptotic gene expressions and caspase activation gene expressions were down-regulated. The flow cytometry apoptosis and cell cycle analysis in treatment group compared to the control, it was observed that the apoptosis rate increased in the ws-deca-P[5] and ws-deca-P[5] were shown to cause G0/G1 phase arrest in both cell groups. Results from our study that pillar[5] arene derivatives had the potential for treating breast and lung cancer, and more research is required in this area.Communicated by Ramaswamy H. Sarma.

Recent progress in iodine capture by macrocycles and cages

The effective capture of radioiodine is vital to the development of the nuclear industry and ecological environmental protection. There is, therefore, a continuously growing research exploration in various types of solid-state materials for iodine capture. During the last decade, the potential of using macrocycle and cage-based supramolecular materials in effective uptake and separation of radioactive iodine has been demonstrated. Interest in the application of these materials in iodine capture originates from their diversified porous characteristics, abundant host-guest chemistry, high iodine affinity and adsorption capacity, high stability in various environments, facile modification and functionalization, and intrinsic structural flexibility, among other attributes. Herein, recent progress in macrocycle and cage-based solid-state materials, including pure discrete macrocycles and cages, and their polymeric forms, for iodine capture is summarized and discussed with an emphasis on iodine capture capacities, mechanisms, and design strategies.

Selectively transport and removal of fluoride ion by pillar[5]arene polymer-filled nanochannel membrane

Excess fluoride ions in groundwater accumulate through the roots of crops, affecting photosynthesis and inhibiting their growth. Long-term bioaccumulation also threatens human health because it is poorly degradable and toxic. Currently, one of the biggest challenges is developing a unique material that can efficiently remove fluoride ions from the environment. The excellent properties of functionalized pillar[5]arene polymer-filled nanochannel membranes were explored to address this challenge. Constructing a multistage porous nanochannel membrane, consisting of microscale etched nanochannels and nanoscale pillar[5]arene cross-linked polymer voids. A fluoride removal rate of 0.0088 mmol ⋅ L-1  ⋅ min-1 was achieved. Notably, this rate surpassed the rates observed with other control ions by a factor of 6 to 8.8. Our research provides a new direction for developing water fluoride ion removal materials.

Pillararene-Based Supramolecular Polymers for Adsorption and Separation

Supramolecular polymers have attracted increasing attention in recent years due to their perfect combination of supramolecular chemistry and traditional polymer chemistry. The design and synthesis of macrocycles have driven the rapid development of supramolecular chemistry and polymer science. Pillar[n]arenes, a new generation of macrocyclic compounds possessing unique pillar-shaped structures, nano-sized cavities, multi-functionalized groups, and excellent host-guest complexation abilities, are promising candidates to construct supramolecular polymer materials with enhanced properties and functionalities. This review summarizes recent progress in the design and synthesis of pillararene-based supramolecular polymers (PSPs) and illustrates their diverse applications as adsorption and separation materials. All performances are evaluated and analyzed in terms of efficiency, selectivity, and recyclability. Typically, PSPs can be categorized into three typical types according to their topologies, including linear, cross-linked, and hybrid structures. The advances made in the area of functional supramolecular polymeric adsorbents formed by new pillararene derivatives are also described in detail. Finally, the remaining challenges and future perspectives of PSPs for separation-based materials science are discussed. This review will inspire researchers in different fields and stimulate creative designs of supramolecular polymeric materials based on pillararenes and other macrocycles for effective adsorption and separation of a variety of targets.

Applications of Supramolecular Polymers Generated from Pillar[n]arene-Based Molecules

Supramolecular chemistry enables the manipulation of functional components on a molecular scale, facilitating a "bottom-up" approach to govern the sizes and structures of supramolecular materials. Using dynamic non-covalent interactions, supramolecular polymers can create materials with reversible and degradable characteristics and the abilities to self-heal and respond to external stimuli. Pillar[n]arene represents a novel class of macrocyclic hosts, emerging after cyclodextrins, crown ethers, calixarenes, and cucurbiturils. Its significance lies in its distinctive structure, comparing an electron-rich cavity and two finely adjustable rims, which has sparked considerable interest. Furthermore, the straightforward synthesis, uncomplicated functionalization, and remarkable properties of pillar[n]arene based on supramolecular interactions make it an excellent candidate for material construction, particularly in generating interpenetrating supramolecular polymers. Polymers resulting from supramolecular interactions involving pillar[n]arene find potential in various applications, including fluorescence sensors, substance adsorption and separation, catalysis, light-harvesting systems, artificial nanochannels, and drug delivery. In this context, we provide an overview of these recent frontier research fields in the use of pillar[n]arene-based supramolecular polymers, which serves as a source of inspiration for the creation of innovative functional polymer materials derived from pillar[n]arene derivatives.

One-pot synthesis of pillar[5]quinone-amine polymer coated silica as stationary phase for high-performance liquid chromatography

To expand the application of pillararene in chromatographic separation, we designed and fabricated a pillar[5]quinone-amine polymer coated silica through quinone-amine reaction by facile one-pot synthesis method, which was applied as a stationary phase for high-performance liquid chromatography. Separation of hydrophobic compounds, hydrophilic compounds, halogenated aromatic compounds, and 11 aromatic positional isomers was achieved successfully in this stationary phase. Reverse-phase separation mode and hydrophilic-interaction separation mode were proved to exist, indicating the potential application of the mix-mode stationary phase. Studies of chromatographic retention behavior and molecular simulation showed that multiple interactions might play an important role in the separation process, including hydrophobic interaction, hydrogen-bonding interaction, aromatic π-π interaction, electron donor-acceptor interaction, and host-guest interaction. Column repeatability and stability were tested, which showed relative standard deviations of retention time less than 0.2% for continuous 11 injections, and the durability relative standard deviations of retention time were less than 0.91% after 90 days. This novel design strategy would broaden the application of pillararene-based covalent organic polymer in chromatography and separation science.

Photoresponsive reversible self-assembly of rod-coil amphiphiles containing spiropyran groups

Stimuli-responsive assembly deformation is a key feature in constructing smart soft materials, which makes them versatile and autonomous. In this study, rod-coil amphiphilic compounds containing spiropyran (SP) groups were developed and synthesized to investigate their stimuli-responsive assembly in a solution system with 99% water content. In addition to photochromic phenomena, reversible light-mediated morphological alterations occurred in these molecular aggregates. Based on the different flexible chain segments of rod-coil amphiphiles, the initial assemblies underwent a dissociation-reassembly process under ultraviolet (UV) irradiation, whereupon they deformed or disassembled to assemblies. Furthermore, as the UV source was removed, the original nanostructures were gradually recovered again via the ring-closing reaction process. These compounds, interestingly, can selectively combine with copper ions to produce cross-linked co-assembled nanostructures. The copper ion complex solution of rod-coil amphiphilic compounds emitted unique bright blue fluorescence, which allowed for the specific visual identification of copper ions in aqueous solutions.

Covalently bridged pillararene-based polymers: structures, synthesis, and applications

Covalently bridged pillararene-based polymers (CBPPs) are a special class of macrocycle-based polymers in which multiple pillararene monomers are attached to the polymer structures by covalent bonds. Owing to the unique molecular structures including the connection components or the spatial structures, CBPPs have become increasingly popular in applications ranging from environmental science to biomedical science. In this review, CBPPs are divided into three types (linear polymers, grafted polymers, and cross-linked polymers) according to their structural characteristics and described from the perspective of synthesis methods comprehensively. In addition, the applications of CBPPs are presented, including selective adsorption and separation, fluorescence sensing and detection, construction of supramolecular gels, anticancer drug delivery, artificial light-harvesting, catalysis, and others. Finally, the current challenging issues and comprehensive prospects of CBPPs are discussed.

Cluster-Based Crystalline Materials for Iodine Capture

The treatment of radioactive iodine in nuclear waste has always been a critical issue of social concern. The rational design of targeted and efficient capture materials is of great significance to the sustainable development of the ecological environment. In recent decades, crystalline materials have served as a molecular platform to study the binding process and capture mechanism of iodine molecules, enabling people to understand the interaction between radioactive iodine guests and pores intuitively. Cluster-based crystalline materials, including molecular clusters and cluster-based metal-organic frameworks, are emerging candidates for iodine capture due to their aggregative binding sites, precise structural information, tunable pores/packing patterns, and abundant modifications. Herein, recent progress of different types of cluster materials and cluster-dominated metal-organic porous materials for iodine capture is reviewed. Research prospects, design strategies to improve the affinity for iodine and possible capture mechanisms are discussed.

Simultaneous Recognition and Separation of Organic Isomers Via Cooperative Control of Pore-Inside and Pore-Outside Interactions

Despite the desirability of organic isomer recognition and separation, current strategies are expensive and complicated. Here, a simple strategy for simultaneously recognizing and separating organic isomers using pillararene-based charge-transfer cocrystals through the cooperative control of pore-inside and pore-outside intermolecular interactions is presented. This strategy is illustrated using 1-bromobutane (1-BBU), which is often produced as an isomeric mixture with 2-bromobutane (2-BBU). According to its structure, perethylated pillar[5]arene (EtP5) and 3,5-dinitrobenzonitrile (DNB) are strategically chosen as a donor and an acceptor. As a result, their cocrystal exhibited stronger pore-inside interactions and much weaker pore-outside interactions with 1-BBU than with 2-BBU. Consequently, nearly 100% 1-BBU selectivity is achieved in two-component mixtures, even in those containing trace 1-BBU (1%), whereas free EtP5 only achieved 89.80% selectivity. The preference for linear bromoalkanes is retained in 1-bromopentane/3-bromopentane and 1-bromohexane/2-bromohexane mixtures, demonstrating the generality of this strategy. Selective adsorption of linear bromoalkanes induced a naked-eye-detectable color change from red to white. Moreover, the cocrystal are used over multiple cycles without losing selectivity.

Detection of aliphatic aldehydes by a pillar[5]arene-based fluorescent supramolecular polymer with vaporchromic behavior

The detection of volatile aliphatic aldehydes is of significance because of their chemical toxicity, physical volatility and widespread applications in chemical industrial processes. In this work, the direct detection of aliphatic aldehydes is tackled using a fluorescent supramolecular polymer with vaporchromic behavior which is contructed by pillar[5]arene-based host-guest intereactions. Thin films with strong orange-yellow fluorescence are prepared by coating the linear supramolecular polymer on glass sheets. When the thin films are exposed to aliphatic aldehydes with different carbon chain lengths, they can selectivly sensing  n -butyraldehyde ( C 4 ) and caprylicaldehyde ( C 8 ), accompanied by fluorescence quenching, indicating that the supramolecular polymer is a highly selective vapochromic response material for aliphatic aldehydes with long alkyl chains.

Supramolecular systems prepared using terpyridine-containing pillararene

Recent progresses about the preparation of terpyridine-containing pillararene, as well as the utilization of those building blocks for making external stimulud-responsive supramolecular systems were summarized in this review.

Supramolecular hyperbranched polymer gels based on pillar[5]arene and their applications in removal of micropollutants from water

Two kinds of pillar[5]arene-based supramolecular hyperbranched polymer gels were constructed and applied to efficiently remove micropollutants from water.