Adsorption Behavior and Mechanism of Palladium on Diethylaminoethyl-Modified Polyglycidyl Methacrylate Macroporous Spheres

The recovery of precious metals, such as palladium (Pd), from wastewater, is an economically important field. The present study reports the application of polyglycidyl methacrylate (PGMA) macroporous spheres with diethylaminoethyl (DEAE) functional groups (PGMA-DEAE) for the adsorption of palladium ions [Pd(II)] from simulated wastewater solutions. The effects of pH, adsorption duration, and initial concentration of Pd(II) on the adsorption amount were evaluated systematically. The results revealed that within the experimental pH range, the adsorption efficiency of Pd(II) increased with increasing pH. In particular, between pH 4 and 6, the Pd(II) adsorption efficiencies were approximately 100%. At 298 K and pH ∼ 4, the adsorption capacity of PGMA-DEAE for Pd(II) was 1.22 mmol/g. The adsorption rates of PGMA-DEAE for Pd(II) were high, and the adsorption equilibrium was reached within 10 min. Ca(II), Mg(II), Co(II), Cu(II), Ni(II), and Fe(II) were selected as representative competitive adsorption metal ions. PGMA-DEAE had good separation selectivity for Pd(II) at pH 1-6 (all RPd/Me > 30), especially at pH ∼ 4 (all RPd/Me > 100). The SEM, TEM, EDS, TG, XRD, and XPS results indicated that in a high-acidity environment (CHCl ≥ 1 mol/L), Pd(II) was adsorbed on PGMA-DEAE through electrostatic attraction, while in a low-acidity environment (pH 1-6), Pd(II) was adsorbed on PGMA-DEAE through coordinated bonding between the Pd(II) ions and the N. PGMA-DEAE exhibited excellent stability and regeneration performance for five regeneration cycles.

Preparation and application of hemostatic microspheres containing biological macromolecules and others

Bleeding from uncontrollable wounds can be fatal, and the body's clotting mechanisms are unable to control bleeding in a timely and effective manner in emergencies such as battlefields and traffic accidents. For irregular and inaccessible wounds, hemostatic materials are needed to intervene to stop bleeding. Hemostatic microspheres are promising for hemostasis, as their unique structural features can promote coagulation. There is a wide choice of materials for the preparation of microspheres, and the modification of natural macromolecular materials such as chitosan to enhance the hemostatic properties and make up for the deficiencies of synthetic macromolecular materials makes the hemostatic microspheres multifunctional and expands the application fields of hemostatic microspheres. Here, we focus on the hemostatic mechanism of different materials and the preparation methods of microspheres, and introduce the modification methods, related properties and applications (in cancer therapy) for the structural characteristics of hemostatic microspheres. Finally, we discuss the future trends of hemostatic microspheres and research opportunities for developing the next generation of hemostatic microsphere materials.

Preparation and application of UPLC silica microsphere stationary phase:A review

In this review, microspheres for ultra-performance liquid chromatography (UPLC) were reviewed in accordance with the literature in recent years. As people's demands for chromatography are becoming more and more sophisticated, the preparation and application of UPLC stationary phases have become the focus of researchers in this field. This new analytical separation science not only maintains the practicality and principle of high-performance liquid chromatography (HPLC), but also improves the step function of chromatographic performance. The review presents the morphology of four types of sub-2 μm silica microspheres that have been used in UPLC, including non-porous silica microspheres (NPSMs), mesoporous silica microspheres (MPSMs), hollow silica microspheres (HSMs) and core-shell silica microspheres (CSSMs). The preparation, pore control and modification methods of different microspheres are introduced in the review, and then the applications of UPLC in drug analysis and separation, environmental monitoring, and separation of macromolecular proteins was presented. Finally, a brief overview of the existing challenges in the preparation of sub-2 μm microspheres, which required further research and development, was given.

Strategies and Applications of Graphene and Its Derivatives-Based Electrochemical Sensors in Cancer Diagnosis

Graphene is an emerging nanomaterial increasingly being used in electrochemical biosensing applications owing to its high surface area, excellent conductivity, ease of functionalization, and superior electrocatalytic properties compared to other carbon-based electrodes and nanomaterials, enabling faster electron transfer kinetics and higher sensitivity. Graphene electrochemical biosensors may have the potential to enable the rapid, sensitive, and low-cost detection of cancer biomarkers. This paper reviews early-stage research and proof-of-concept studies on the development of graphene electrochemical biosensors for potential future cancer diagnostic applications. Various graphene synthesis methods are outlined along with common functionalization approaches using polymers, biomolecules, nanomaterials, and synthetic chemistry to facilitate the immobilization of recognition elements and improve performance. Major sensor configurations including graphene field-effect transistors, graphene modified electrodes and nanocomposites, and 3D graphene networks are highlighted along with their principles of operation, advantages, and biosensing capabilities. Strategies for the immobilization of biorecognition elements like antibodies, aptamers, peptides, and DNA/RNA probes onto graphene platforms to impart target specificity are summarized. The use of nanomaterial labels, hybrid nanocomposites with graphene, and chemical modification for signal enhancement are also discussed. Examples are provided to illustrate applications for the sensitive electrochemical detection of a broad range of cancer biomarkers including proteins, circulating tumor cells, DNA mutations, non-coding RNAs like miRNA, metabolites, and glycoproteins. Current challenges and future opportunities are elucidated to guide ongoing efforts towards transitioning graphene biosensors from promising research lab tools into mainstream clinical practice. Continued research addressing issues with reproducibility, stability, selectivity, integration, clinical validation, and regulatory approval could enable wider adoption. Overall, graphene electrochemical biosensors present powerful and versatile platforms for cancer diagnosis at the point of care.

Precipitation Polymerization: A Powerful Tool for Preparation of Uniform Polymer Particles

Precipitation polymerization (PP) is a powerful tool to prepare various types of uniform polymer particles owing to its outstanding advantages of easy operation and the absence of any surfactant. Several PP approaches have been developed up to now, including traditional thermo-induced precipitation polymerization (TRPP), distillation precipitation polymerization (DPP), reflux precipitation polymerization (RPP), photoinduced precipitation polymerization (PPP), solvothermal precipitation polymerization (SPP), controlled/‘‘living’’ radical precipitation polymerization (CRPP) and self-stabilized precipitation polymerization (2SPP). In this review, a general introduction to the categories, mechanisms, and applications of precipitation polymerization and the recent developments are presented, proving that PP has great potential to become one of the most attractive polymerization techniques in materials science and bio-medical areas.

Characterization of a heptapeptide-modified microsphere for oriented antibody immobilization

Oriented immobilization of antibodies is important for the effective recognition of target antigens. In this paper, a heptapeptide ligand, HWRGWVC (HC7), was modified onto non-porous mono-sized poly (glyceryl methacrylate) (pGMA) microspheres (named pGMA-HC7) to explore the antibody immobilization behaviors. Characterization of the microspheres by particle size analyzer, scanning electron microscopy, Fourier transform infrared spectroscopy, and reversed-phase chromatography proved the success of each fabrication step. The capacity and activity of antibody immobilization through HC7 were studied using immunoglobulin G (IgG) as a model antibody and horseradish peroxidase (HRP) as a model antigen. Additionally, IgG immobilizations on pGMA microspheres by nonspecific adsorption and covalent coupling through carbodiimide chemistry were conducted for comparison. pGMA-HC7 exhibited an IgG adsorption capacity of 3-4 mg/g in 10 min by the specific binding of HC7 without nonspecific interactions. Notably, the ligand HC7 showed a by two orders of magnitude stronger affinity for IgG than its original hexapeptide ligand HWRGWV. Moreover, the capacity and activity of the immobilized anti-HRP antibody on pGMA-HC7 were 1.6-fold and 3-fold higher than those of the covalent coupling, respectively. The results proved the superior role of HWRGWVC in the affinity binding of antibody and the potential of pGMA-HC7-25 in immunoassay and immunodiagnostic applications.

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by 13C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N2 sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.

Rational Design of Pore Parameters in Monodisperse Porous Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) Particles Based on Response Surface Methodology

Monodisperse porous poly(glycidyl methacrylate-co–ethylene glycol dimethacrylate) particles are widely applied in different fields, as their pore properties can be influenced and functionalization of the epoxy group is versatile. However, the adjustment of parameters which control morphology and pore properties such as pore volume, pore size and specific surface area is scarcely available. In this work, the effects of the process factors monomer:porogen ratio, GMA:EDMA ratio and composition of the porogen mixture on the response variables pore volume, pore size and specific surface area are investigated using a face centered central composite design. Non-linear effects of the process factors and second order interaction effects between them were identified. Despite the complex interplay of the process factors, targeted control of the pore properties was possible. For each response a response surface model was derived with high predictive power (all R2predicted > 0.85). All models were tested by four external validation experiments and their validity and predictive power was demonstrated.