Green construction of eco-friendly phosphotungstic acid Sr-MOF catalysts for crystal violet removal and synthesis of coumarin and xanthene compounds

Solar-driven seawater desalination via plasmonic hybrid MOF/polymer and its antibacterial activity

In recent years, solar seawater desalination has been considered to be a promising and cost-effective technique to produce clean sources for water treatment and water deficiency. In addition, this technique shows high photothermal conversion efficiency by solar collectors to transfer solar energy into heat and the transformation of molecules in the capillaries of solar evaporators. In this study, we report the preparation of graphene-supported MIL-125 with polyurethane foam (MGPU) for solar steam generation. We modified MGPU by using the plasmonic nanoparticles of Ag and a polymer of polyaniline to increase the evaporation rate. Polyurethane foam can float on the surface of water and self-pump water by its hydrophilic porous structure, superior thermal insulation capabilities, and easy fabrication. MIL-125 has a high salt rejection and higher water permeability. It can reduce the affinity between water molecules and the pore surface of membrane, making it simple for water molecules to move through the pores. GO is a great alternative for steam generation applications since it exhibits broad-band light. The strong solar absorption, photothermal conversion efficiency, and photoreaction efficiency are enhanced by the use of silver nanoparticles in the photoreaction. The salt resistance capability is enhanced in saline water in the presence of polyaniline in a composite. Under one solar irradiation, the Ag/PANI/GO@MIL-125 (Ag-PMG) nanocomposite demonstrates an average 1.26 kg m² h^-1 rate of evaporation and an efficiency as high as 90%. The composite exhibits remarkable stability and durability after more than 10 cycles of use without a noticeable decrease in activity. In addition, the composite exhibits excellent organic dye removal from contaminated water and generates pure condensed freshwater. The antibacterial photoactivity of the photocatalysts was examined against B. subtilis and E. coli. The results demonstrate that Ag-PMG shows higher antibacterial activity than MIL-125 and PMG. It was shown that the presence of rGO, PANI, and Ag in the sample enhances the antimicrobial activity.

Cesium salt of tungstophosphoric acid/mesoporous (zirconia-silica) composite for highly efficient synthesis of 7-hydroxy-4-methyl coumarin and removal of methylene blue

The removal of harmful organic dyes from aqueous solutions has drawn the attention of scientists because of the substantial threat they pose to society's worldwide health. Hence, it is crucial to design an adsorbent that is both very effective in removing dyes and has the benefit of being inexpensive. In the present work, Cs salts of tungstophosphoric acid (CPW) supported mesoporous Zr-mSiO₂ (mZS) with varying extents of Cs ions have been prepared by a two-step impregnation technique. Accordingly, a lowering in the surface acidity modes was observed after Cs exchanged protons of H₃W₁₂O₄₀ and formed salts immobilized on the mZS support. After exchanging the protons with Cs ions, the characterization results revealed that the primary Keggin structure was unaltered. Moreover, the Cs exchanged catalysts had higher surface area than the parent H₃W₁₂O₄₀/mZS, suggesting that Cs reacts with H₃W₁₂O₄₀ molecules to create new primary particles with smaller sizes possessing inter-crystallite centers with a higher dispersion degree. With an increase in Cs content and thus a decrease in the acid strength and surface acid density, the methylene blue (MB) monolayer adsorption capacities on CPW/mZS catalysts were increased and reached an uptake capacity of 359.9 mg g^-1 for Cs₃PW₁₂O₄₀/mZS (3.0CPW/mZS). The catalytic formation of 7-hydroxy-4-methyl coumarin was also studied at optimum conditions and it is found that the catalytic activity is influenced by the amount of exchangeable Cs with PW on the mZrS support, which is in turn influenced by the catalyst acidity. The catalyst kept approximately the initial catalytic activity even after the fifth cycle.

Enhanced Peroxidase-Mimic Catalytic Activity via Cerium Doping of Strontium-Based Metal-Organic Frameworks with Design of a Smartphone-Based Sensor for On-Site Salivary Total Antioxidant Capacity Detection in Lung Cancer Patients

The development of artificial nanozymes with superior catalytic performance and excellent stability has been a long-standing objective for chemists. The total antioxidant capacity (TAC) is one of the most important bioanalytical measures of oxidative stress in the body. The present work aims to develop a smartphone-assisted visual detection sensor using cerium-doped strontium-based metal-organic frameworks (Ce-SrMOFs) as peroxidase-like nanozymes for the rapid, low-cost, on-site detection of TAC. The pristine SrMOF functioned as a peroxidase nanozyme, and its enzymatic activity was enhanced after doping it with Ce(IV) ions because of the multivalent nature and synergistic impact of the heteroatoms. The Ce-SrMOFs were sensitive to the single electron transfer and hydrogen atom transfer processes, which implies that the Ce-SrMOFs can serve as an ideal nanozyme candidate for TAC analysis. The investigated mechanism revealed that •OH is the most active oxygen species for the peroxidase-like activity. The Ce-SrMOFs exhibited a strong affinity for 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂, with K_m values of 0.082 and 0.427 mM, which are 5.29- and 8.67-fold lower than those of horseradish peroxidase (HRP), respectively. The Ce-SrMOFs were used for the detection of ascorbic acid, cysteine, and glutathione, with limits of detection of 44, 53, and 512 nM, respectively. The proposed method proved effective in measuring the TAC in saliva samples from lung cancer patients, thereby yielding results with satisfactory precision and accuracy.

Facile Synthesis of NiO-CuO/Activated Carbon Nanocomposites for Use in the Removal of Lead and Cadmium Ions from Water

In this work, activated carbon (AC) was synthesized and then modified using nickel(II) oxide and copper(II) oxide. Pure-AC, 10, 20, 30, and 40 wt % nanohybrid NiO-CuO/AC nanocomposites (χ-NC/AC NCs) were characterized using XRD, IR, EDS, surface area, and FE-SEM techniques. Furthermore, the adsorbents obtained were tested for their ability to remove hazardous Pb(II) and Cd(II) from water. The fabricated x-NC/AC NC adsorbents showed the highest adsorptive performance toward the adsorption of Pb(II) and Cd(II) from water. The 30-NC/AC NC adsorbent showed the complete removal of Pb(II) at pH = 5 and Cd(II) at pH = 7 within 30 min. Overall, the obtained superior experimental results suggest that the adsorptive performance of AC was greatly enhanced after loading hybrid metal oxide nanoparticles, so its application in water treatment is potential and applicable.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Adsorptive removal of crystal violet from aqueous solution by ultrasonic-assisted synthesized zirconium-2,6-naphthalenedicarboxylate metal-organic framework

Zirconium-2,6-naphthalenedicarboxylate metal-organic framework (Zr-NDC MOF) was prepared using ultrasound-assisted synthesis and tested for the adsorptive removal of crystal violet (CV) dye from aqueous solution. The pristine Zr-NDC was characterized using powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, Fourier-transform infrared, elemental analysis, and dynamic light scattering techniques. The maximum percentage removal of CV dye was found to be 99.45% with an initial dye concentration of 10 mg L-1. The kinetics and adsorption isotherm models were used to investigate the removal of CV dye from aqueous solution using Zr-NDC. Langmuir adsorption isotherm model (R2 = 0.9880) describes the adsorption of CV dye onto Zr-NDC and the maximum equilibrium adsorption capacity (454.2 mg g-1) was achieved with the CV dye having an initial concentration of 100 mg L-1. The adsorption was found to follow pseudo-second-order kinetics (R2 = 0.9960) with a rate constant of 6.52 × 10-4 g mg-1 min-1. The effect of various parameters such as dye concentration, contact time, pH of dye solution, and MOF dose on the adsorption of dye was investigated. The study proved that the Zr-NDC is a promising adsorbent in the removal of CV dye from aqueous solution.

Oxidation of BINOLs by Hypervalent Iodine Reagents: Facile Synthesis of Xanthenes and Lactones

Xanthene derivatives have broad applications in medicines, fluorescent probes, dyes, food additives, etc. Therefore, much attention was focused on developing the synthetic methods to prepare these compounds. Binaphthyl‐based xanthene derivatives were prepared through the oxidation of BINOLs promoted by the hypervalent iodine reagent iodosylbenzene (PhIO). Nine‐membered lactones were obtained through a similar oxidative reaction when iodoxybenzene (PhIO₂) was used. Additionally, one‐pot reactions of BINOLs, PhIO and nucleophiles such as alcohols and amines were also investigated to provide alkoxylated products and amides in good to excellent yields.

A novel trigonal bipyramidal cage-based Zn(ii)-MOF featuring two types of trinuclear clusters with high gas sorption properties

A unique trigonal bipyramidal cage-based Zn(ii)-MOF built from a linear trinuclear pin-wheel cluster and a triangular trinuclear cluster was prepared and shows a moderate gas adsorption amounts and high selectivities towards C2Hn/CH4 and C2H2/CO2.