Peroxidase catalytic activity of carbon nanoparticles for glutathione detection

Integrated ultrastructural, physiological, transcriptomic, and metabolomic analysis uncovers the mechanisms by which nicotinamide alleviates cadmium toxicity in Pistia stratiotes L

Exogenous nicotinamide (NIC) is a promising solution to relieve heavy metal (HM) toxicity in plants. Nonetheless, the underlying mechanisms involved remain poorly understood. As NIC addition (200 μM) can increase the tolerance of Pistia stratiotes L. to Cd stress (10 mg L-1), this strategy was subjected to integrated ultrastructural, physiological, transcriptomic, and metabolomic analysis to reveal the mechanisms involved. Exogenous NIC initiated a series of physiological, transcriptional, and metabolic responses that alleviated Cd damage. NIC addition improved Cd transfer from roots to leaves and reduced Cd damage in roots. The transported Cd to leaves did not induce further toxicity because it was abundantly compartmentalised in cell walls, which might be mediated by lignin synthesis. Moreover, NIC addition improved the repair of photosystem II in leaves under Cd stress by inducing key genes (e.g., chlorophyll A-B binding protein and PSII repair protein encoding genes), resulting in the restoration of Fv/Fm. In addition, antioxidant enzyme activities (e.g., peroxidase and catalase) and synthesis of antioxidants (e.g., stachydrine and curculigoside) were triggered to overcome oxidative stress. Our work paves the way for a deeper understanding of the mechanisms by which NIC alleviates HM toxicity in plants, providing a basis for improving phytoremediation.

Biodegradable composites from poly(butylene adipate-co-terephthalate) with carbon nanoparticles: Preparation, characterization and performances

The development of composites for food packaging that have good mechanical and antimicrobial characteristics is still a major challenge. In applications like food packaging, the usage of poly (butylene adipate-co-terephthalate) (PBAT), which has an adversative effect on the environment and reduces petroleum resources, has grown widespread. The present work reveals PBAT composites reinforced with CNPs at a few percentages up to 5.0 wt %. The PBAT/CNPs composites were produced using the solvent casting method. The results of TGA studies, CNPs significantly enhanced the thermal stability of composites using PBAT. The mechanical strength of the PBAT composites was improved by increasing CNPs concentration. Tensile strength increased from 7.38 to 10.22 MPa, respectively. The oxygen transmission rate (OTR) decreased with increasing the CNPs concentrations. The barrier properties (H2O and O2) of PBAT were improved by the presence of CNPs. WVTR was calculated to be 108.6 ± 1.8 g/m2/day for PBAT. WVTR reduced when CNPs concentration in PBAT increased. The PCN-5.0 film sample had the lowest WVTR value, 34.1 ± 3.1 g/m2/day. For PCN-3.0, WVTR dropped by 45.39%, indicating and even with a 3.0 wt% loading of CNPs in PBAT, the rise is noticeable. Contact angle measurements indicate that PBAT/CNPs composites becomes hydrophobic after reinforcing. Gram-positive (S. aureus) and Gram-negative (E. coli) food-borne pathogenic microorganisms showed enhanced antimicrobial activity against the developed PBAT composites. The carrot pieces preserved their freshness for an extended period of 12 days while packaged in the PBAT/CNPs composite film, indicating that the film is an effective and excellent packaging for food materials.

Magnetoplasmonic gold nanorods for the sensitive and label-free detection of glutathione

This work exploits the magneto-optical activity of gold nanorods for the detection of sub-micromolar concentrations of glutathione using magnetic circular dichroism spectroscopy. Modulations of the magnetoplasmonic response of nanorods serve as the basis of the sensing methodology, whereby the presence of glutathione induces the end-to-end assembly of nanorods. In particular, the nanorod self-assembly enables a localized electric field in the nanocavities with adsorbed thiol molecules, whose field strength is amplified by the external magnetic field as confirmed by finite-element modeling, enabling their high-sensitivity detection. Our simple magnetoplasmonic sensor for glutathione requires no specific chemical tags and exhibits an impressive limit of detection of 97 nM.

Aptamer-Engineered Cu2O Nanocubes as a Surface-Modulated Catalytic Optical Sensor for Lung Cancer Cell Detection

Herein, fine and homogeneous Cu₂O nanocubes are synthesized and sensitized with a hairpin-structured AS1411 aptamer for the establishment of a biosensor for lung cancer cell detection. The Apt-Cu₂O nanocubes feature a recognition function in identifying a cancer-associated surface nucleolin protein. The intrinsic reduction catalytic ability is also confirmed by the use of two benchmark substrates, methylene blue (MB) and 4-nitrophenol (4-NP). The aptamer grafting on Apt-Cu₂O nanocubes is able to greatly prevent nonspecific-protein binding and to show specificity toward the nucleolin protein. The specific binding resulting from nucleolin protein leads to less exposure of the active area of the Apt-Cu₂O nanocubes, so the catalytic ability of Apt-Cu₂O nanocubes is thus diminished. The modulated catalytic ability led to less generation of the reduced 4-AP product, and the change in absorption of 4-AP allows the quantification of the nucleolin protein with a detection limit of 0.47 nM. The as-developed biosensor is applied to the detection of nucleolin-overexpressed A549 lung cancer cells, presenting a sensitive detection limit down to 20 cells. This may be ascribed to the clustering of surface nucleolin protein in a lipid raft membrane of cancer cells, as evidenced by a notable binding of Apt-Cu₂O nanocubes on the cancer cell surface. Real human serum samples spiked with cancer cells were also investigated, and a recovery rate of 87 ± 2.4% for 20 extracted cells validates the surface-modulated Apt-Cu₂O nanocubes-based catalytic optical biosensor as a promising tool for the detection of circulating tumor cells. The establishment of the Apt-Cu₂O nanocubes may allow for further studies on their use as a potential theranostics tool for cancer therapy.

Fabrication of microtiter plate on paper using 96-well plates for wax stamping

Paper-based analytical devices have prominently emerged as a group of diagnostic tools with prospective to eliminate the expensive, time-consuming, and intricate analytical methodologies. Wax printing has been a dominant technique to fabricate hydrophobic patterns on paper for fluid control, but the discontinuation of commercial solid ink printers has begun a genesis of alternate wax patterning strategies. In this study, a simple and rapid fabrication methodology for realizing a 96-well microtiter plate on paper has been developed. The method involves the use of commercially available polystyrene microplates as a stamp for wax patterning. The technique further eradicates the requirement of customized stamps and the step of heating paper substrates for creating wax barriers. Thus, wax stamped paper microplates can be used for a wide range of bioanalytical tests maneuvering reduced generation of non-biodegradable waste, minimal reagent usage, and inexpensive readout strategies. The viability of the fabricated platform has been assessed by colorimetric detection of glutathione using 3,3',5,5'-tetramethylbenzidine-H₂O₂ redox system. RGB analysis of the colorimetric response showed a linear concentration range from 0 to 90 µM (R ² = 0.989) along with a detection limit of 28.375 µM.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10404-022-02606-3.

The Mn-modified porphyrin metal-organic framework with enhanced oxidase-like activity for sensitively colorimetric detection of glutathione

The selective detection of glutathione (GSH) has been used as important colorimetric probe for human health. Herein, we used a facile method to synthesize manganese ions modified porphyrin metal-organic framework (PCN-224-Mn) with a size of 125.7 ± 14.2 nm and zeta potential of -3.9 ± 0.5 mV. We showed that PCN-224-Mn catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the absence of H₂O₂, resulting in a blue-colored oxidized TMB (oxTMB) that exhibits oxidase-like activity. Furthermore, a simple colorimetric detection method for GSH was developed based on the oxidase-like activity of PCN-224-Mn. This method shows wide linear detection range of 0.5-60 μM for GSH with a much lower detection limit of 0.233 μM. Finally, the recovery of colorimetric sensor of PCN-224-Mn suggests its great potential as a biosensor. As the catalytically active site, the manganese porphyrin unit plays a major role in the oxidase-like property and detection ability of PCN-224-Mn. Our data suggest that GSH detection method using PCN-224-Mn has great potential in multiple applications in the future.

Physiological and rhizospheric response characteristics to cadmium of a newly identified cadmium accumulator Coreopsis grandiflora Hogg. (Asteraceae)

Screening for superior cadmium (Cd) phytoremediation resources and uncovering the mechanisms of plant response to Cd are important for effective phytoremediation of Cd-polluted soils. In this study, the characteristics of Coreopsis grandiflora related to Cd tolerance and accumulation were analyzed to evaluate its Cd phytoremediation potential. The results revealed that C. grandiflora can tolerate up to 20 mg kg^-1 of Cd in the soil. This species showed relatively high shoot bioconcentration factors (1.09-1.85) and translocation factors (0.46-0.97) when grown in soils spiked with 5-45 mg kg^-1 Cd, suggesting that C. grandiflora is a Cd accumulator and can potentially be used for Cd phytoextraction. Physiological analysis indicated that antioxidant enzymes (i.e., superoxide dismutase, peroxidase, and catalase) and various free amino acids (e.g., proline, histidine, and methionine) participate in Cd detoxification in C. grandiflora grown in soil spiked with 20 mg kg^-1 of Cd (Cd20). The overall microbial richness and diversity remained similar between the control (Cd0) and Cd20 soils. However, the abundance of multiple rhizospheric microbial taxa was altered in the Cd20 soil compared with that in the Cd0 soil. Interestingly, many plant growth-promoting microorganisms (e.g., Nocardioides, Flavisolibacter, Rhizobium, Achromobacter, and Penicillium) enriched in the Cd20 soil likely contributed to the growth and vitality of C. grandiflora under Cd stress. Among these, some microorganisms (e.g., Rhizobium, Achromobacter, and Penicillium) likely affected Cd uptake by C. grandiflora. These abundant plant growth-promoting microorganisms potentially interacted with soil pH and the concentrations of Cd and AK in soil. Notably, potassium-solubilizing microbes (e.g., Rhizobium and Penicillium) may effectively solubilize potassium to assist Cd uptake by C. grandiflora. This study provides a new plant resource for Cd phytoextraction and improves our understanding of rhizosphere-associated mechanisms of plant adaptation to Cd-contaminated soil.