Development of a panchromatic photosensitizer and its application to photocatalytic CO2 reduction

Photoexcitation and One-Electron Reduction Processes of a CO2 Photoreduction Dyad Catalyst Having a Zinc(II) Porphyrin Photosensitizer

We have explored the photophysical properties and one-electron reduction process in the dyad photocatalyst for CO2 photoreduction, ZnP-phen=Re, in which the catalyst of fac-[Re(1,10-phenanthoroline)(CO)3Br] is directly connected with the photosensitizer of zinc(II) porphyrin (ZnP), using time-resolved infrared spectroscopy, transient absorption spectroscopy, and quantum chemical calculations. We revealed the following photophysical properties: (1) the intersystem crossing occurs with a time constant of ∼20 ps, which is much faster than that of a ZnP single unit, and (2) the charge density in the excited singlet and triplet states is mainly localized on ZnP, which means that the excited state is assignable to the π-π* transition in ZnP. The one-electron reduction by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole occurs via the triplet excited state with the time constant of ∼100 ns and directly from the ground state with the time constant of ∼3 μs. The charge in the one-electron reduction species spans ZnP and the phenanthroline ligand, and the dihedral angle between ZnP and the phenanthroline ligand is rotated by ∼24° with respect to that in the ground state, which presumably offers an advantage for proceeding to the next CO2 reduction process. These insights could guide the new design of dyad photocatalysts with porphyrin photosensitizers.

Silicon photocathode functionalized with osmium complex catalyst for selective catalytic conversion of CO2 to methane

Solar-driven CO2 reduction to yield high-value chemicals presents an appealing avenue for combating climate change, yet achieving selective production of specific products remains a significant challenge. We showcase two osmium complexes, przpOs, and trzpOs, as CO2 reduction catalysts for selective CO2-to-methane conversion. Kinetically, the przpOs and trzpOs exhibit high CO2 reduction catalytic rate constants of 0.544 and 6.41 s-1, respectively. Under AM1.5 G irradiation, the optimal Si/TiO2/trzpOs have CH4 as the main product and >90% Faradaic efficiency, reaching -14.11 mA cm-2 photocurrent density at 0.0 VRHE. Density functional theory calculations reveal that the N atoms on the bipyrazole and triazole ligands effectively stabilize the CO2-adduct intermediates, which tend to be further hydrogenated to produce CH4, leading to their ultrahigh CO2-to-CH4 selectivity. These results are comparable to cutting-edge Si-based photocathodes for CO2 reduction, revealing a vast research potential in employing molecular catalysts for the photoelectrochemical conversion of CO2 to methane.

Fluorinated chlorin chromophores for red-light-driven CO2 reduction

The utilization of low-energy photons in light-driven reactions is an effective strategy for improving the efficiency of solar energy conversion. In nature, photosynthetic organisms use chlorophylls to harvest the red portion of sunlight, which ultimately drives the reduction of CO2. However, a molecular system that mimics such function is extremely rare in non-noble-metal catalysis. Here we report a series of synthetic fluorinated chlorins as biomimetic chromophores for CO2 reduction, which catalytically produces CO under both 630 nm and 730 nm light irradiation, with turnover numbers of 1790 and 510, respectively. Under appropriate conditions, the system lasts over 240 h and stays active under 1% concentration of CO2. Mechanistic studies reveal that chlorin and chlorinphlorin are two key intermediates in red-light-driven CO2 reduction, while corresponding porphyrin and bacteriochlorin are much less active forms of chromophores.

Photocatalytic CO2 Reduction Using an Osmium Complex as a Panchromatic Self-Photosensitized Catalyst: Utilization of Blue, Green, and Red Light

The photocatalytic reduction of carbon dioxide (CO2) represents an attractive approach for solar-energy storage and leads to the production of renewable fuels and valuable chemicals. Although some osmium (Os) photosensitizers absorb long wavelengths in the visible-light region, a self-photosensitized, mononuclear Os catalyst for red-light-driven CO2 reduction has not yet been exploited. Here, we discovered that the introduction of an Os metal to a PNNP-type tetradentate ligand resulted in the absorption of light with longer-wavelength (350-700 nm) and that can be applied to a panchromatic self-photosensitized catalyst for CO2 reduction to give mainly carbon monoxide (CO) with a total turnover number (TON) of 625 under photoirradiation (λ≥400 nm). CO2 photoreduction also proceeded under irradiation with blue (λ0=405 nm), green (λ0=525 nm), or red (λ0=630 nm) light to give CO with >90 % selectivity. The quantum efficiency using red light was determined to be 12 % for the generation of CO. A catalytic mechanism is proposed based on the detection of intermediates using various spectroscopic techniques, including transient absorption, electron paramagnetic resonance, and UV/Vis spectroscopy.

Photocatalytic conversion of CO2 to CO by Ru(II) and Os(II) octahedral complexes: a DFT/TDDFT study

The reaction mechanisms of the photocatalytic reduction of CO2 to CO catalyzed by [(en)M(CO)3Cl] complexes (M = Ru, Os, en = ethylenediamine) in the presence of triethanolamine (TEOA), R3N (R = -CH2CH2OH), in DCM and DMF solvents, were studied by means of DFT/TDDFT electronic structure calculations. The geometric and free energy reaction profiles for two possible reaction pathways were calculated. Both reaction pathways studied, start with the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ generated from the first triplet excited state, T1 upon reductive quenching by TEOA which acts as a sacrificial electron donor. In the first possible pathway, TEOA- anion binds to the metal center of the catalytically active intermediate, [(en)M(CO)3]˙+ followed by CO2 insertion into the M-OCH2CH2NR2 bond. The latter upon successive protonations releases a metal 'free' [R2NCH2CH2OC(O)(OH)] intermediate which starts a new and final catalytic cycle, leading to the formation of CO and H2O while regenarating TEOA. In the second possible pathway, the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ captures CO2 molecule, forming an η1-CO2 complex. Upon 2H+/2e- successive protonations and reductions, CO product is obtained along with regenarating the catalytically active intermediate [(en)M(CO)3]˙+. The nature of the proton donor affects the reaction profiles of both mechanisms. The nature of the solvent does not affect significantly the reaction mechanisms under study. Finally, since photoexcitation and T1 reductive quenching are common to both pathways, we have srutinized the photophysical properties of the [(en)M(CO)3Cl] complexes along with their T1 excited states reduction potentials, . The [(en)M(CO)3Cl] complexes absorb mainly in the UV region while the absolute are in the range 6.4-0.9 eV.

Phosphorus(V) Tetraazaporphyrin with an Intense, Broad CT Band in the Near-IR Region

In phosphorus tetraazaporphyrins (PTAPs), the Q- and charge-transfer (CT) bands appear as a result of configuration interaction between their excited states. On the basis of this concept, a PTAP with an intense, broad CT band in the near-IR region has been rationally designed and realized by introducing eight diphenylaminophenyl (dPAP) groups. The order of the CT and Q-bands in ascending energy was supported by magnetic circular dichroism (MCD) spectroscopy and theoretical calculations. An intense two-photon absorption was also found in the deep near-IR region.

Electronic Effect Promoted Visible-Light-Driven CO2-to-CO Conversion in a Water-Containing System

The design of unsaturated nonprecious metal complexes with high catalytic performance for photochemical CO2 reduction is still an important challenge. In this paper, four coordinatively unsaturated Co-salen complexes 1-4 were explored in situ using o-phenylenediamine derivatives and 5-methylsalicylaldehyde as precursors of the ligands in 1-4. It was found that complex 4, bearing a nitro substituent (-NO2) on the aromatic ring of the salen ligand, exhibits the highest photochemical performance for visible-light-driven CO2-to-CO conversion in a water-containing system, with TONCO and CO selectivity values of 5300 and 96%, respectively. DFT calculations and experimental results revealed that the promoted photocatalytic activity of 4 is ascribed to the electron-withdrawing effect of the nitro group in 4 compared to 1-3 (with -CH3, -F, and -H groups, respectively), resulting in a lower reduction potential of active metal centers CoII and lower barriers for CO2 coordination and C-O cleavage steps for 4 than those for catalysts 1-3.

Improved transition metal photosensitizers to drive advances in photocatalysis

To function effectively in a photocatalytic application, a photosensitizer's light absorption, excited-state lifetime, and redox potentials, both in the ground state and excited state, are critically important. The absorption profile is particularly relevant to applications involving solar harvesting, whereas the redox potentials and excited-state lifetimes determine the thermodynamics, kinetics, and quantum yields of photoinduced redox processes. This perspective article focuses on synthetic inorganic and organometallic approaches to optimize these three characteristics of transition-metal based photosensitizers. We include our own work in these areas, which has focused extensively on exceptionally strong cyclometalated iridium photoreductants that enable challenging reductive photoredox transformations on organic substrates, and more recent work which has led to improved solar harvesting in charge-transfer copper(i) chromophores, an emerging class of earth-abundant compounds particularly relevant to solar-energy applications. We also extensively highlight many other complementary strategies for optimizing these parameters and highlight representative examples from the recent literature. It remains a significant challenge to simultaneously optimize all three of these parameters at once, since improvements in one often come at the detriment of the others. These inherent trade-offs and approaches to obviate or circumvent them are discussed throughout.

Panchromatic and Perturbed Absorption Spectral Features and Multiredox Properties of Dicyanovinyl- and Dicyanobutadienyl-Appended Cobalt Corroles

Four new β-functionalized π-extended cobalt corroles with one and two dicyanovinyl (DCV) or dicyanobutadienyl (DCBD) moieties at the 3- and 3,17-positions have been synthesized and characterized by various spectroscopic techniques. Interestingly, the synthesized DCV- and DCBD-appended cobalt corroles displayed panchromatic and near-infrared absorption in the range 300-1100 nm in CH2Cl2 and pyridine solvents. (MN)2-(Cor)Co and A2MN2-(Cor)Co exhibited 8-9 times enhancement in the molar absorptivity of the Q band compared to the parent corrole ((Cor)Co). The unique absorption spectral features of these β-functionalized cobalt corroles are splitting, broadening, and red-shifting in the Soret and Q bands. One DCV unit brings a 30-46 nm red shift, whereas one DCBD unit brings a 40-75 nm red shift in the Q band compared to the corresponding precursors. This is rare that the intensity of the longest Q band is greater than or equal to the Soret-like bands. These corrole derivatives exhibit UV-vis spectral features similar to those of chlorophyll a. A 220 mV positive shift per DCV group and 160 mV positive shift per DCBD group were observed in the first oxidation potentials compared to (Cor)Co in the desired direction for the utility of these cobalt complexes in electrocatalysis. DFT studies revealed that HOMO and LUMO were stabilized after appending DCV and DCBD groups on the corrole macrocycle and exhibited a "push-pull" behavior leading to promising material applications in nonlinear optics (NLO) and catalysis.

Fine-tuning benzazole-based probe for the ultrasensitive detection of Hg2+ in water samples and seaweed samples

Developing potentially toxic metal ion probes is significant for environment and food safety. Although Hg²⁺ probes have been extensively studied, small molecule fluorophores that can integrate two applications of visual detection and separation into one unit remain challenging to access. Herein, by incorporating triphenylamine (TPA) into tridentate skeleton with an acetylene bridge, 2,6-bisbenzimidazolpyridine-TPA (4a), 2,6-bisbenzothiazolylpyridine-TPA (4b) and 2,6-bisbenzothiazolylpyridine-TPA (4c) were first constructed, expectably showing distinct solvatochromism and dual-state emission properties. Since the diverse emission properties, the fluorescence detection of 4a-4b can be achieved with an ultrasensitive response (LOD = 10^-11 M) and efficient removal of Hg²⁺. More interestingly, 4a-4b can not only be developed into paper/film sensing platform, but also reliably detect Hg²⁺ in real water and seaweed samples, with recoveries ranging from 97.3% to 107.8% and a relative standard deviation of less than 5%, indicating that they have excellent application potential in the field of environmental and food chemistry.

Reaching strong absorption up to 700 nm with new benzo[g]quinoxaline-based heteroleptic copper(I) complexes for light-harvesting applications

Heteroleptic copper(I) complexes, with a diimine as a chromophoric unit and a bulky diphosphine as an ancillary ligand, have the advantage of a reduced pseudo Jahn-Teller effect in their excited state over the corresponding homoleptic bis(diimine) complexes. Nevertheless, their lowest absorption lies generally between 350 to 500 nm. Aiming at a strong absorption in the visible by stable heteroleptic Cu(I) complexes, we designed a novel diimine based on 4-(benzo[g]quinoxal-2'-yl)-1,2,3-triazole derivatives. The large π-conjugation of the benzoquinoxaline moiety shifted bathochromically the absorption with regard to other diimine-based Cu(I) complexes. Adding another Cu(I) core broadened the absorption and extended it to considerably longer wavelengths. Moreover, by fine-tuning the structure of the dichelating ligand, we achieved a panchromatic absorption up to 700 nm with a high molar extinction coefficient of 8000 M^-1 cm^-1 at maximum (λ = 570 nm), making this compound attractive for light-harvesting antennae.

Photoinduced Catalytic Organic-Hydride Transfer to CO2 Mediated with Ruthenium Complexes as NAD+ /NADH Redox Couple Models

The catalytic organic-hydride transfer to CO₂ was first achieved through the photoinduced two-electron reduction of the [Ru(bpy)₂ (pbn)]²⁺ /[Ru(bpy)₂ (pbnHH)]²⁺ (bpy=2,2'-bipyridine, pbn=2-(pyridin-2-yl)benzo[b]-1,5-naphthyridine, and pbnHH=2-(pyridin-2-yl)-5,10-dihydrobenzo[b]-1,5-naphthyridine) redox couple in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). The active species for the catalytic hydride transfer to carbon dioxide giving formate is [Ru(bpy)(bpy⋅^- )(pbnHH)]⁺ formed by one-electron reduction of [Ru(bpy)₂ (pbnHH)]²⁺ with BI⋅.

Surface-Specific Modification of Graphitic Carbon Nitride by Plasma for Enhanced Durability and Selectivity of Photocatalytic CO2 Reduction with a Supramolecular Photocatalyst

Photocatalytic CO₂ reduction is in high demand for sustainable energy management. Hybrid photocatalysts combining semiconductors with supramolecular photocatalysts represent a powerful strategy for constructing visible-light-driven CO₂ reduction systems with strong oxidation power. Here, we demonstrate the novel effects of plasma surface modification of graphitic carbon nitride (C₃N₄), which is an organic semiconductor, to achieve better affinity and electron transfer at the interface of a hybrid photocatalyst consisting of C₃N₄ and a Ru(II)-Ru(II) binuclear complex (RuRu'). This plasma treatment enabled the "surface-specific" introduction of oxygen functional groups via the formation of a carbon layer, which worked as active sites for adsorbing metal-complex molecules with methyl phosphonic-acid anchoring groups onto the plasma-modified surface of C₃N₄. Upon photocatalytic CO₂ reduction with the hybrid under visible-light irradiation, the plasma-surface-modified C₃N₄ with RuRu' enhanced the durability of HCOOH production by three times compared to that achieved when using a nonmodified system. The high selectivity of HCOOH production against byproduct evolution (H₂ and CO) was improved, and the turnover number of HCOOH production based on the RuRu' used reached 50 000, which is the highest among the metal-complex/semiconductor hybrid systems reported thus far. The improved activity is mainly attributed to the promotion of electron transfer from C₃N₄ to RuRu' under light irradiation via the accumulation of electrons trapped in deep defect sites on the plasma-modified surface of C₃N₄.

Supramolecular multi-electron redox photosensitisers comprising a ring-shaped Re(i) tetranuclear complex and a polyoxometalate

Redox photosensitisers (PSs) play essential roles in various photocatalytic reactions. Herein, we synthesised new redox PSs of 1 : 1 supramolecules that comprise a ring-shaped Re(i) tetranuclear complex with 4+ charges and a Keggin-type heteropolyoxometalate with 4- charges. These PSs photochemically accumulate multi-electrons in one molecule (three or four electrons) in the presence of an electron donor and can supply electrons with different reduction potentials. PSs were successfully applied in the photocatalytic reduction of CO2 using catalysts (Ru(ii) and Re(i) complexes) and triethanolamine as a reductant. In photocatalytic reactions, these supramolecular PSs supply a different number of electrons to the catalyst depending on the redox potential of the intermediate, which is made from the one-electron-reduced species of the catalyst and CO2. Based on these data, information on the reduction potentials of the intermediates was obtained.

Enhanced circularly polarized luminescence of chiral Eu(III) coordination polymers with structural strain

Three types of Eu(III) coordination polymers with different distorted chiral ligands, [Eu(+tfc)₃(p-dpeb)]_n, [Eu(+pfc)₃(p-dpeb)]_n, and [Eu(+hfc)₃(p-dpeb)]_n (+tfc: (+)-3-(trifluoroacetyl)camphorate, +pfc: (+)-3-(pentafluoropropionyl)camphorate, +hfc: (+)-3-(heptafluorobutyryl)camphorate, p-dpeb: 1,4-bis(diphenylphosphorylethynyl)benzene), were prepared for elucidating the relationship between their structural distortions, ligand-to-metal charge transfer (LMCT), and circularly polarized luminescence (CPL) properties. Their strain factors in the ligands were evaluated using crystallographic data obtained by single-crystal X-ray structural analyses. The characteristics of the LMCT excited states were estimated from theoretical calculations. The introduction of a bulky substituent into the chiral ligand afforded a distorted structure of β-diketonates and changed the direction of the transition electric dipole moments, which are related to the magnitude of the CPL intensity. The CPL dissymmetry factor (g_CPL) of [Eu(+hfc)₃(p-dpeb)]_n, with a large distorted structure, was -0.22, while those of [Eu(+tfc)₃(p-dpeb)]_n and [Eu(+pfc)₃(p-dpeb)]_n, with small distorted structures, were -0.05 and -0.10, respectively. The controlled steric hindrance of the chiral ligands in Eu(III) coordination polymers is one of the strain factors enhancing their CPL properties.

Recent Advances in Metal-Based Molecular Photosensitizers for Artificial Photosynthesis

Artificial photosynthesis (AP) has been extensively applied in energy conversion and environment pollutants treatment. Considering the urgent demand for clean energy for human society, many researchers have endeavored to develop materials for AP. Among the materials for AP, photosensitizers play a critical role in light absorption and charge separation. Due to the fact of their excellent tunability and performance, metal-based complexes stand out from many photocatalysis photosensitizers. In this review, the evaluation parameters for photosensitizers are first summarized and then the recent developments in molecular photosensitizers based on transition metal complexes are presented. The photosensitizers in this review are divided into two categories: noble-metal-based and noble-metal-free complexes. The subcategories for each type of photosensitizer in this review are organized by element, focusing first on ruthenium, iridium, and rhenium and then on manganese, iron, and copper. Various examples of recently developed photosensitizers are also presented.

Photocatalyzed decarboxylation of oxamic acids under near-infrared conditions

Photocatalyzed oxidative decarboxylation of oxamic acids under near-infrared irradiation using Os(bptpy)₂(PF₆)₂ as catalyst is reported. The reaction was applied to the synthesis of urethanes and heterocyclic amides. Mechanistic studies and comparative penetration depths between the NIR and the visible light mediated processes are discussed.

Photocatalytic Systems for CO2 Reduction: Metal-Complex Photocatalysts and Their Hybrids with Photofunctional Solid Materials

Photocatalytic CO₂ reduction is a critical objective in the field of artificial photosynthesis because it can potentially make a total solution for global warming and shortage of energy and carbon resources. We have successfully developed various highly efficient, stable, and selective photocatalytic systems for CO₂ reduction using transition metal complexes as both photosensitizers and catalysts. The molecular architectures for constructing selective and efficient photocatalytic systems for CO₂ reduction are discussed herein. As a typical example, a mixed system of a ring-shaped Re(I) trinuclear complex as a photosensitizer and fac-[Re(bpy)(CO)₃{OC₂H₄N(C₂H₄OH)₂}] as a catalyst selectively photocatalyzed CO₂ reduction to CO with the highest quantum yield of 82% and a turnover number (TON) of over 600. Not only rare and noble metals but also earth abundant ones, such as Mn(I), Cu(I), and Fe(II) can be used as central metal cations. In the case using a Cu(I) dinuclear complex as a photosensitizer and fac-Mn(bpy)(CO)₃Br as a catalyst, the total formation quantum yield of CO and HCOOH from CO₂ was 57% and TON_CO+HCOOH exceeded 1300.

Efficient supramolecular photocatalysts for CO₂ reduction, in which photosensitizer and catalyst units are connected through a bridging ligand, were developed for removing a diffusion control on collisions between a photosensitizer and a catalyst. Supramolecular photocatalysts, in which [Ru(N^∧N)₃]²⁺-type photosensitizer and Re(I) or Ru(II) catalyst units are connected to each other with an alkyl chain, efficiently and selectively photocatalyzed CO₂ reduction in solutions. Mechanistic studies using time-resolved IR and electrochemical measurements provided molecular architecture for constructing efficient supramolecular photocatalysts. A Ru(II)–Re(I) supramolecular photocatalyst constructed according to this molecular architecture efficiently photocatalyzed CO₂ reduction even when it was fixed on solid materials. Harnessing this property of the supramolecular photocatalysts, two types of hybrid photocatalytic systems were developed, namely, photocatalysts with light-harvesting capabilities and photoelectrochemical systems for CO₂ reduction.

Introduction of light-harvesting capabilities into molecular photocatalytic systems should be important because the intensity of solar light shone on the earth’s surface is relatively low. Periodic mesoporous organosilica, in which methyl acridone groups are embedded in the silica framework as light harvesters, was combined with a Ru(II)–Re(I) supramolecular photocatalyst with phosphonic acid anchoring groups. In this hybrid, the photons absorbed by approximately 40 methyl acridone groups were transferred to one Ru(II) photosensitizer unit, and then, the photocatalytic CO₂ reduction commenced.

To use water as an abundant electron donor, we developed hybrid photocatalytic systems combining metal-complex photocatalysts with semiconductor photocatalysts that display high photooxidation powers, in which two photons are sequentially absorbed by the metal-complex photosensitizer and the semiconductor, resulting in both high oxidation and reduction power. Various types of dye-sensitized molecular photocathodes comprising the p-type semiconductor electrodes and the supramolecular photocatalysts were developed. Full photoelectrochemical cells combining these dye-sensitized molecular photocathodes and n-type semiconductor photoanodes achieved CO₂ reduction using only visible light as the energy source and water as the reductant. Drastic improvement of dye-sensitized molecular photocathodes is reported.

The results presented in this Account clearly indicate that we can construct very efficient, selective, and durable photocatalytic systems constructed with the metal-complex photosensitizers and catalysts. The supramolecular-photocatalyst architecture in which the photosensitizer and the catalyst are connected to each other is useful especially on the surface of solid owing to rapid electron transfer from the photosensitizer to the catalyst. On basis of these findings, we successfully constructed hybrid systems of the supramolecular photocatalysts with photoactive solid materials. These hybridizations can add new functions to the metal-complex photocatalytic systems, such as water oxidation and light harvesting.

BODIPY and Dipyrrin as Unexpected Robust Anchoring Groups on TiO2 Nanoparticles

Covalent attachment of molecules to metal oxide surfaces typically demands the presence of an anchoring group that in turn requires synthetic steps to introduce. BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) chromophores have long been...