Origin of the N-coordinated single-atom Ni sites in heterogeneous electrocatalysts for CO2 reduction reaction

Bifunctional oxygen reduction/evolution reaction electrocatalysts achieved by axial ligand modulation on two-dimensional porphyrin frameworks

Exploring efficient and low-cost oxygen reduction and oxygen evolution reaction (ORR/OER) bifunctional catalysts is essential for the development of energy storage and conversion devices. Herein, enlightened by the experimentally synthesized cobalt(II) meso-tetraethynylporphyrins (Co-TEP) molecule, we designed a novel 2D covalent organic framework (COF), namely a 2D Co-TEP monolayer, by dimensional expansion. The 2D Co-TEP monolayer, with Co atoms distributed separately and stabilized by uniform pyrrolic-N coordination, features metal-nitrogen-carbon single-atom catalyst activity and shows tunable catalytic activity for the electrochemical ORR/OER by axial ligand (O, OH, Cl, CN, CH3, NO, F) modulation. By means of the state-of-the-art constant-potential first-principles computations and microkinetic simulations, we demonstrated that 2D Co-TEP-CN exhibits good ORR/OER performance in both acidic and alkaline conditions. The difference between the onset-potential for the OER and the half-wave potential for the ORR is only 0.85 V at pH = 1, smaller than that of Pt/IrO2 electrocatalysts. The good electrocatalytic performance is maintained by replacing the center metal atoms with Mn, Fe and/or Ni. Our investigation highlights the role of the pyrrolic-N coordination and the ligands in improving the catalytic activity of 2D COFs and provides new insights into the rational design of efficient bifunctional ORR/OER catalysts.

First-Principles Insights into the Selectivity of CO2 Electroreduction over Heterogeneous Single-Atom Catalysts

Heterogeneous metal-nitrogen-carbon (M-N-C) single-atom catalysts (SACs) have garnered considerable attention in the two-electron CO2 reduction reaction (2e-CO2RR). Interestingly, almost M-N-C SACs mainly produce CO, while Sb is one of the few SACs reported so far that can produce HCOOH. Nevertheless, the underlying factors for different selectivities on Sb-N-C SAC remain controversial, and the lack of in-depth understanding of limiting factors hampers further regulations. Here, by using constant-potential first-principles calculations, we revealed that the high HCOOH selectivity of Sb-N-C SAC is mainly attributed to their weak charge accumulation ability. Remarkably, considering the highly tunable geometric structure of M-N-C SACs, we provide that Sb-N-C SAC with the SbN3S1 center is a promising candidate for CO production. Our work provides the mechanism insight into 2e-CO2RR selectivity and further paves the way toward electrocatalyst regulation and design.

Not One, Not Two, But at Least Three: Activity Origin of Copper Single-Atom Catalysts toward CO2/CO Electroreduction to C2+ Products

Copper (Cu) single-atom catalysts (SACs) exhibit great potential for generating multicarbon (C2+) products, but the intrinsic activity of single-atom Cu (Cu1) under realistic conditions remains controversial. Herein, we perform extensive calculations with explicit solvation to investigate the underlying mechanism of Cu SACs, disclosing the absence of C2+ activity in Cu1 sites regardless of the different substrates. The original Cu1 sites (first taking Cu1 stably anchored on carbon nitride as an example) cannot facilitate *CO hydrogenation and CO-CO coupling due to the lack of active sites nearby, and they are unstable under operation, causing leaching and aggregation to form small Cu clusters. The derived Cu clusters composed of at least three Cu atoms can efficiently promote CO-CO coupling, as revealed by kinetic analyses. We extend the modeling to other typical Cu SACs and reveal that all of the Cu1 sites are inactive, while the C2+ performance of the derived Cu-cluster catalysts is substrate-dependent. This study offers mechanistic insights into Cu SACs and provides practical guidance for their rational optimization.

Novel Perovskite Structured Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ as Highly Efficient Catalyst for Oxygen Electrode in Solid Oxide Electrochemical Cells

Developing catalytic materials with highly efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for lower-temperature solid oxide fuel cell (SOFC) and electrolysis cell (SOEC) technologies. In this work, a novel triple perovskite material, Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ, has been developed and employed as a catalyst for both ORR and OER in SOFC and SOEC operations at relatively lower temperatures, showing a low polarization resistance of 0.327 Ω cm2, high-power output of SOFC up to 773 mW cm-2 at 650 °C, and a high current density of 1.57 A cm-2 from SOEC operation at 1.5 V at 600 °C. The relaxation time distribution reveals that Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ could maintain a slow polarization process at the relatively low operating temperature, offering a significant antipolarization advantage over other perovskite electrode materials. The Nd0.5Ba0.5Co1/3Ni1/3Mn1/3O3-δ electrode provides a low energy barrier of about 0.36 eV in oxygen ion mobility, which is beneficent for oxygen reduction/evolution reaction processes.

Local compressive strain regulation of atomically dispersed NiN4 sites for enhancing CO2 electroreduction to CO

Electroreduction of CO2 to valuable chemicals powered by renewable electricity provides a sustainable approach to reduce the environmental issues originating from CO2 emission. However, insufficient current density and production selectivity hinder its further application. In this case, precisely regulating the CO2 reduction reaction (CO2RR) active sites is an excellent strategy to simultaneously reduce the reaction barrier and suppress the hydrogen evolution reaction (HER) pathway. Herein, the strain regulation of atomically dispersed NiN4 active sites is investigated in helical carbon. Ni-N coordination in the curved carbon lattice displays a reduced distance compared to that in a straight lattice, inflicting local compressive strain on NiN4. The resultant catalyst shows the highest CO selectivity of up to 99.4% at -1.4 V (vs. RHE), the FECO is maintained at over 85% over a wide potential range from -0.8 to -1.8 V (vs. RHE), and the maximum partial current density for CO reaches a high of 458 mA cm-2 at -1.8 V (vs. RHE). Theoretical investigations show the superior CO2 electroreduction performance of curved NiN4 stems from its remarkable ability to generate the *COOH intermediate and to suppress the hydrogen combination simultaneously. Our findings offer a novel strategy to rationally regulate the local three-dimensional structure of single-atom sites for efficient electrocatalysis.

Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.

Tracking the Evolution of Single-Atom Catalysts for the CO2 Electrocatalytic Reduction Using Operando X-ray Absorption Spectroscopy and Machine Learning

Transition metal-nitrogen-doped carbons (TMNCs) are a promising class of catalysts for the CO2 electrochemical reduction reaction. In particular, high CO2-to-CO conversion activities and selectivities were demonstrated for Ni-based TMNCs. Nonetheless, open questions remain about the nature, stability, and evolution of the Ni active sites during the reaction. In this work, we address this issue by combining operando X-ray absorption spectroscopy with advanced data analysis. In particular, we show that the combination of unsupervised and supervised machine learning approaches is able to decipher the X-ray absorption near edge structure (XANES) of the TMNCs, disentangling the contributions of different metal sites coexisting in the working TMNC catalyst. Moreover, quantitative structural information about the local environment of active species, including their interaction with adsorbates, has been obtained, shedding light on the complex dynamic mechanism of the CO2 electroreduction.

A conductive catecholate-based framework coordinated with unsaturated bismuth boosts CO2 electroreduction to formate

Bismuth-based metal-organic frameworks (Bi-MOFs) have received attention in electrochemical CO₂-to-formate conversion. However, the low conductivity and saturated coordination of Bi-MOFs usually lead to poor performance, which severely limits their widespread application. Herein, a conductive catecholate-based framework with Bi-enriched sites (HHTP, 2,3,6,7,10,11-hexahydroxytriphenylene) is constructed and the zigzagging corrugated topology of Bi-HHTP is first unraveled via single-crystal X-ray diffraction. Bi-HHTP possesses excellent electrical conductivity (1.65 S m^-1) and unsaturated coordination Bi sites are confirmed by electron paramagnetic resonance spectroscopy. Bi-HHTP exhibited an outstanding performance for selective formate production of 95% with a maximum turnover frequency of 576 h^-1 in a flow cell, which surpassed most of the previously reported Bi-MOFs. Significantly, the structure of Bi-HHTP could be well maintained after catalysis. In situ attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirms that the key intermediate is *COOH species. Density functional theory (DFT) calculations reveal that the rate-determining step is *COOH species generation, which is consistent with the in situ ATR-FTIR results. DFT calculations confirmed that the unsaturated coordination Bi sites acted as active sites for electrochemical CO₂-to-formate conversion. This work provides new insights into the rational design of conductive, stable, and active Bi-MOFs to improve their performance towards electrochemical CO₂ reduction.

Geometric and Electronic Structural Engineering of Isolated Ni Single Atoms for a Highly Efficient CO2 Electroreduction

Tuning the coordination environment and geometric structures of single atom catalysts is an effective approach for regulating the reaction mechanism and maximize the catalytic efficiency of single-atom centers. Here, a template-based synthesis strategy is proposed for the synthesis of high-density NiN_x sites anchored on the surface of hierarchically porous nitrogen-doped carbon nanofibers (Ni-HPNCFs) with different coordination environments. First-principles calculations and advanced characterization techniques demonstrate that the single Ni atom is strongly coordinated with both pyrrolic and pyridinic N dopants, and that the predominant sites are stabilized by NiN₃ sites. This dual engineering strategy increases the number of active sites and utilization efficiency of each single atom as well as boosts the intrinsic activity of each active site on a single-atom scale. Notably, the Ni-HPNCF catalyst achieves a high CO Faradaic efficiency (FE_CO ) of 97% at a potential of -0.7 V, a high CO partial current density (j_CO ) of 49.6 mA cm^-2 (-1.0 V), and a remarkable turnover frequency of 24 900 h^-1 (-1.0 V) for CO₂ reduction reactions (CO₂ RR). Density functional theory calculations show that compared to pyridinic-type NiN_x , the pyrrolic-type NiN₃ moieties display a superior CO₂ RR activity over hydrogen evolution reactions, resulting in their superior catalytic activity and selectivity.

Can Metal-Nitrogen-Carbon Single-Atom Catalysts Boost the Electroreduction of Carbon Monoxide?

Metal-nitrogen-carbon single-atom catalysts (SACs) have exhibited substantial potential for CO₂ electroreduction. Unfortunately, the SACs generally cannot generate chemicals other than CO, while deep reduction products are more appealing because of their higher market potential, and the origin of governing CO reduction (COR) remains elusive. Here, by using constant-potential/hybrid-solvent modeling and revisiting Cu catalysts, we show that the Langmuir-Hinshelwood mechanism is of importance for *CO hydrogenation, and the pristine SACs lack another site to place *H, thus preventing their COR. Then, we propose a regulation strategy to enable COR on the SACs: (I) the metal site has a moderate CO adsorption affinity; (II) the graphene skeleton is doped by a heteroatom to allow *H formation; and (III) the distance between the heteroatom and the metal atom is appropriate to facilitate *H migration. We discover a P-doped Fe-N-C SAC with promising COR reactivity and further extend this model to other SACs. This work provides mechanistic insight into the limiting factors of COR and highlights the rational design of the local structures of active centers in electrocatalysis.

Carbon Capture Materials in Post-Combustion: Adsorption and Absorption-Based Processes

Global warming and climate changes are among the biggest modern-day environmental problems, the main factor causing these problems is the greenhouse gas effect. The increased concentration of carbon dioxide in the atmosphere resulted in capturing increased amounts of reflected sunlight, causing serious acute and chronic environmental problems. The concentration of carbon dioxide in the atmosphere reached 421 ppm in 2022 as compared to 280 in the 1800s, this increase is attributed to the increased carbon dioxide emissions from the industrial revolution. The release of carbon dioxide into the atmosphere can be minimized by practicing carbon capture utilization and storage methods. Carbon capture utilization and storage (CCUS) has four major methods, namely, pre-combustion, post-combustion, oxyfuel combustion, and direct air capture. It has been reported that applying CCUS can capture up to 95% of the produced carbon dioxide in running power plants. However, a reported cost penalty and efficiency decrease hinder the wide applicability of CCUS. Advancements in the CCSU were made in increasing the efficiency and decreasing the cost of the sorbents. In this review, we highlight the recent developments in utilizing both physical and chemical sorbents to capture carbon. This includes amine-based sorbents, blended absorbents, ionic liquids, metal-organic framework (MOF) adsorbents, zeolites, mesoporous silica materials, alkali-metal adsorbents, carbonaceous materials, and metal oxide/metal oxide-based materials. In addition, a comparison between recently proposed kinetic and thermodynamic models was also introduced. It was concluded from the published studies that amine-based sorbents are considered assuperior carbon-capturing materials, which is attributed to their high stability, multifunctionality, rapid capture, and ability to achieve large sorption capacities. However, more work must be done to reduce their cost as it can be regarded as their main drawback.

What is the Real Origin of the Activity of Fe-N-C Electrocatalysts in the O2 Reduction Reaction? Critical Roles of Coordinating Pyrrolic N and Axially Adsorbing Species

Fe-N-C electrocatalysts have emerged as promising substitutes for Pt-based catalysts for the oxygen reduction reaction (ORR). However, their real catalytic active site is still under debate. The underlying roles of different types of coordinating N including pyridinic and pyrrolic N in catalytic performance require thorough clarification. In addition, how to understand the pH-dependent activity of Fe-N-C catalysts is another urgent issue. Herein, we comprehensively studied 13 different N-coordinated FeN_xC configurations and their corresponding ORR activity through simulations which mimic the realistic electrocatalytic environment on the basis of constant-potential implicit solvent models. We demonstrate that coordinating pyrrolic N contributes to a higher activity than pyridinic N, and pyrrolic FeN₄C exhibits the highest activity in acidic media. Meanwhile, the in situ active site transformation to *O-FeN₄C and *OH-FeN₄C clarifies the origin of the higher activity of Fe-N-C in alkaline media. These findings can provide indispensable guidelines for rational design of better durable Fe-N-C catalysts.

Density Functional Theory Study on NiNx (x = 1, 2, 3, 4) Catalytic Hydrogenation of Acetylene

In this study, using the application of density functional theory, the mechanism of graphene-NiN_x (x = 1, 2, 3, 4) series non-noble metal catalysts in acetylene hydrogenation was examined under the B3LYP/6-31G** approach. With the DFT-D3 density functional dispersion correction, the effective core pseudopotential basis set of LANL2DZ was applied to metallic Ni atoms. The reaction energy barriers of NiN_x catalysts are different from the co-adsorption structure during the catalytic hydrogenation of graphene-NiN_x (x = 1, 2, 3, 4). The calculated results showed that the energy barrier and selectivity of graphene-NiN₄ for ethylene production were 25.24 kcal/mol and 26.35 kcal/mol, respectively. The low energy barrier and high activity characteristics showed excellent catalytic performance of the catalyst. Therefore, graphene-NiN₄ provides an idea for the direction of catalytic hydrogenation.

Why heterogeneous single-atom catalysts preferentially produce CO in the electrochemical CO2 reduction reaction

Formate and CO are competing products in the two-electron CO₂ reduction reaction (2e CO₂RR), and they are produced via *OCHO and *COOH intermediates, respectively. However, the factors governing CO/formate selectivity remain elusive, especially for metal–carbon–nitrogen (M–N–C) single-atom catalysts (SACs), most of which produce CO as their main product. Herein, we show computationally that the selectivity of M–N–C SACs is intrinsically associated with the CO₂ adsorption mode by using bismuth (Bi) nanosheets and the Bi–N–C SAC as model catalysts. According to our results, the Bi–N–C SAC exhibits a strong thermodynamic preference toward *OCHO, but under working potentials, CO₂ is preferentially chemisorbed first due to a charge accumulation effect, and subsequent protonation of chemisorbed CO₂ to *COOH is kinetically much more favorable than formation of *OCHO. Consequently, the Bi–N–C SAC preferentially produces CO rather than formate. In contrast, the physisorption preference of CO₂ on Bi nanosheets contributes to high formate selectivity. Remarkably, this CO₂ adsorption-based mechanism also applies to other typical M–N–C SACs. This work not only resolves a long-standing puzzle in M–N–C SACs, but also presents simple, solid criteria (i.e., CO₂ adsorption modes) for indicating CO/formate selectivity, which help strategic development of high-performance CO₂RR catalysts.

This report discloses a nontrivial role of the CO₂ adsorption mode in governing the CO/formate selectivity of single-atom catalysts towards two-electron CO₂ reduction.