Recent advances in heterostructured cathodic electrocatalysts for non-aqueous Li-O2 batteries

Enhanced Li-O2 battery performance using NiS/MoS2 heterostructure by building internal electric field to promote the one-electron oxygen reduction/oxidation

Electrocatalysts with appropriate electron coupling toward LiO2 intermediates can exhibit superior oxygen reduction/evolution reaction kinetics in Li-O2 batteries (LOBs). In this work, a charge redistribution strategy has been developed by constructing NiS/MoS2 heterostructure nanosheet self-assembled hollow microspheres with an internal electric field to regulate the interaction with LiO2 and then improve the electrochemical performance of LOBs. Density functional theory calculations and physicochemical characterizations reveal that the difference of work functions between NiS and MoS2 promotes the electron redistribution in heterointerface via built-in electrical field, leading to increased electron density of interfacial Ni atom, thereby enhancing its electron coupling toward LiO2 intermediates and promoting one-electron oxygen reduction/oxidation reaction kinetics. As a result, the NiS/MoS2-based LOBs exhibit evidently higher discharge capacity and much better cycling performance than the batteries using NiS and MoS2. This work provides a reliable charge redistribution strategy induced by build-in electric field to design efficient catalysts for LOBs.

Unleashing the potential of Li-O2 batteries with electronic modulation and lattice strain in pre-lithiated electrocatalysts

Efficient catalysts are indispensable for overcoming the sluggish reaction kinetics and high overpotentials inherent in Li-O2 batteries. However, the lack of precise control over catalyst structures at the atomic level and limited understanding of the underlying catalytic mechanisms pose significant challenges to advancing catalyst technology. In this study, we propose the concept of precisely controlled pre-lithiated electrocatalysts, drawing inspiration from lithium electrochemistry. Our results demonstrate that Li+ intercalation induces lattice strain in RuO2 and modulates its electronic structure. These modifications promote electron transfer between catalysts and reaction intermediates, optimizing the adsorption behavior of Li-O intermediates. As a result, Li-O2 batteries employing Li0.52RuO2 exhibit ultrahigh energy efficiency, long lifespan, high discharge capacity, and excellent rate performance. This research offers valuable insights for the design and optimization of efficient electrocatalysts at the atomic level, paving the way for further advancements in Li-O2 battery technology.

Constructed Mott-Schottky Heterostructure Catalyst to Trigger Interface Disturbance and Manipulate Redox Kinetics in Li-O2 Battery

Lithium-oxygen batteries (LOBs) with high energy density are a promising advanced energy storage technology. However, the slow cathodic redox kinetics during cycling causes the discharge products to fail to decompose in time, resulting in large polarization and battery failure in a short time. Therefore, a self-supporting interconnected nanosheet array network NiCo2O4/MnO2 with a Mott-Schottky heterostructure on titanium paper (TP-NCO/MO) is ingeniously designed as an efficient cathode catalyst material for LOBs. This heterostructure can accelerate electron transfer and influence the charge transfer process during adsorption of intermediate by triggering the interface disturbance at the heterogeneous interface, thus accelerating oxygen reduction and oxygen evolution kinetics and regulating product decomposition, which is expected to solve the above problems. The meticulously designed unique structural advantages enable the TP-NCO/MO cathode catalyst to exhibit an astounding ultra-long cycle life of 800 cycles and an extraordinarily low overpotential of 0.73 V. This study utilizes a simple method to cleverly regulate the morphology of the discharge products by constructing a Mott-Schottky heterostructure, providing important reference for the design of efficient catalysts aimed at optimizing the adsorption of reaction intermediates.

2D MXene/MBene Superlattice with Narrow Bandgap as Superior Electrocatalyst for High-Performance Lithium-Oxygen Battery

Lithium-oxygen (Li-O2) battery with large theoretical energy density (≈3500 Wh kg-1) is one of the most promising energy storage and conversion systems. However, the slow kinetics of oxygen electrode reactions inhibit the practical application of Li-O2 battery. Thus, designing efficient electrocatalysts is crucial to improve battery performance. Here, Ti3C2 MXene/Mo4/3B2-x MBene superlattice is fabricated its electrocatalytic activity toward oxygen redox reactions in Li-O2 battery is studied. It is found that the built-in electric field formed by a large work function difference between Ti3C2 and Mo4/3B2-x will power the charge transfer at the interface from titanium (Ti) site in Ti3C2 to molybdenum (Mo) site in Mo4/3B2-x. This charge transfer increases the electron density in 4d orbital of Mo site and decreases the d-band center of Mo site, thus optimizing the adsorption of intermediate product LiO2 at Mo site and accelerating the kinetics of oxygen electrode reactions. Meanwhile, the formed film-like discharge products (Li2O2) improve the contact with electrode and facilitate the decomposition of Li2O2. Based on the above advantages, the Ti3C2 MXene/Mo4/3B2-x MBene superlattice-based Li-O2 battery exhibits large discharge specific capacity (17 167 mAh g-1), low overpotential (1.16 V), and superior cycling performance (475 cycles).

Nanoengineering of Cathode Catalysts for Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries have obtained widespread attention as next-generation energy storage systems due to their extremely high energy density. However, the high charge overpotential, attributed to the insulating property of Li2O2, significantly limits the energy efficiency and triggers solvent degradation. The high electrochemical activities of oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) on the cathode are crucial for alleviating the high charging polarizations and enhancing the lifetime of Li-O2 batteries, which are also top challenges of state-of-art research. In this review, the scientific challenges and the proposed solutions in the development of cathode catalysts have been summarized. The recent research advancements on the nanoengineering of cathode catalysts for Li-O2 batteries have been comprehensively discussed, and the perspectives on the structure optimization are presented. Meanwhile, we have elucidated the structure-performance relationship between the electronic state and performance of the cathode catalysts at the nanoscale level. This review intends to provide guidelines for the design and construction of cathode catalysts in advanced Li-O2 batteries.

First Principles Study of the Structure-Performance Relation of Pristine Wn+1Cn and Oxygen-Functionalized Wn+1CnO2 MXenes as Cathode Catalysts for Li-O2 Batteries

Li-O2 batteries are considered a highly promising energy storage solution. However, their practical implementation is hindered by the sluggish kinetics of the oxygen reduction (ORR) and oxygen evolution (OER) reactions at cathodes during discharging and charging, respectively. In this work, we investigated the catalytic performance of Wn+1Cn and Wn+1CnO2 MXenes (n = 1, 2, and 3) as cathodes for Li-O2 batteries using first principles calculations. Both Wn+1Cn and Wn+1CnO2 MXenes show high conductivity, and their conductivity is further enhanced with increasing atomic layers, as reflected by the elevated density of states at the Fermi level. The oxygen functionalization can change the electronic properties of WC MXenes from the electrophilic W surface of Wn+1Cn to the nucleophilic O surface of Wn+1CnO2, which is beneficial for the activation of the Li-O bond, and thus promotes the Li+ deintercalation during the charge-discharge process. On both Wn+1Cn and Wn+1CnO2, the rate-determining step (RDS) of ORR is the formation of the (Li2O)2* product, while the RDS of OER is the LiO2* decomposition. The overpotentials of ORR and OER are positively linearly correlated with the adsorption energy of the RDS LixO2* intermediates. By lowering the energy band center, the oxygen functionalization and increasing atomic layers can effectively reduce the adsorption strength of the LixO2* intermediates, thereby reducing the ORR and OER overpotentials. The W4C3O2 MXene shows immense potential as a cathode catalyst for Li-O2 batteries due to its outstanding conductivity and super-low ORR, OER, and total overpotentials (0.25, 0.38, and 0.63 V).

Bimetallic MXene with tailored vanadium d-band as highly efficient electrocatalyst for reversible lithium-oxygen battery

Lithium-oxygen (Li-O2) battery possesses high theoretical energy density of ∼ 3500 Wh kg-1, yet the sluggish kinetics of oxygen redox reactions hinder its practical application. Herein, TiVC bimetallic MXene solid solution is prepared as the efficient electrocatalyst for Li-O2 battery. The results of experiment and theoretical calculations reveal that through the formation of Ti-C-V bond in TiVC, electrons transfer from V site to Ti site enhances electron delocalization of V sites, which causes the upshift of d band center of V site and strengthens the adsorption of intermediate products (LiO2) on TiVC electrode surface. Due to the strong adsorption of intermediates, the film-like Li2O2 can be formed on TiVC electrode via the surface-adsorbed pathway, which ensures the full contact between the electrode and discharged product and thus facilitates the charge transfer between TiVC electrode and oxygen species during charge process. As a consequence, the TiVC based Li-O2 battery exhibits superior electrochemical performance including large discharge capacity (12780 mAh/g) and extended cycling stability (422 cycles) at the current density of 300 mA g-1.

A facile coprecipitation approach for synthesizing LaNi0.5Co0.5O3 as the cathode for a molten-salt lithium-oxygen battery

The cathode of a lithium-oxygen battery (LOB) should be well designed to deliver high catalytic activity and long stability, and to provide sufficient space for accommodating the discharge product. Herein, a facile coprecipitation approach is employed to synthesize LaNi0.5Co0.5O3 (LNCO) perovskite oxide with a low annealing temperature. The assembled LOB exhibits superior electrochemical performance with a low charge overpotential of 0.03-0.05 V in the current density range of 0.1-0.5 mA cm-2. The battery ran stably for 119 cycles at a high coulombic efficiency. The superior performance is ascribed to (i) the high catalytic activity of LNCO towards oxygen reduction/evolution reactions; (ii) the increased temperature enabling fast kinetics; and (iii) the LiNO3-KNO3 molten salt enhancing the stability of the LOB operating at high temperature.

Delocalized Electronic Engineering of Ni5 P4 Nanoroses for Durable Li-O2 Batteries

The sluggish kinetics and issues associated with the parasitic reactions of cathodes are major obstacles to the large-scale application of Li-O2 batteries (LOBs), despite their large theoretical energy density. Therefore, efficient electrocatalyst design is critical for optimizing their performance. Ni5 P4 is analyzed theoretically as a cathode material, and the downshift of the d-band center is found to enhance electron occupation in antibonding orbits, providing a valuable descriptor for understanding and enhancing the intrinsic electrocatalytic activity. In this study, it is demonstrated that incorporating additional nitrogen atoms into Ni5 P4 nanoroses regulates the electronic structure, resulting in superior electrocatalytic performance in LOBs. Further spectroscopic analysis and density functional theory calculations reveal that the incorporated nitrogen sites can effectively induce localized structure polarization, lowering the energy barrier for the production of desirable intermediates and thus enhancing battery capacity and preventing cell degradation. This approach provides a sound basis for developing advanced electrode materials with optimized electronic structures for high-performance LOBs.

Turn "Waste" Into Wealth: MoO2 @coal Gangue Electrocatalyst with Amorphous/Crystalline Heterostructure for Efficient Li-O2 Batteries

Unreasonable accumulation of coal gangue in mining area has become the major source of global pollution. Probing the high-valued utilization of coal gangue has become a key approach to address the problem. Herein, a promising catalyst of MoO₂ @coal gangue with amorphous/crystalline heterostructure derived from mine solid waste, which acts as an efficient cathode for Li-O₂ batteries is first reported. Impressively, the as-prepared catalyst exhibits a favorable initial discharge capacity of 9748 mAh g^-1 and promising long-term cyclic stability over 2200 h. Experimental results coupled with density functional theory (DFT) analysis reveal that the synergistic interaction between high-activity MoO₂ and stable SiO₂ , unique amorphous/crystalline heterostructure and the modified interfacial adsorption of LiO₂ intermediate are critical factors in promoting the electrochemical performance. This work provides a new insight to design marked electrocatalysts by mine solid waste for Li-O₂ batteries.

Stepping Up the Kinetics of Li-O2 Batteries by Shrinking Down the Li2O2 Granules through Concertedly Enhanced Catalytic Activity and Photoactivity of Se-Doped LaCoO3

Owing to their structural tunability for furnishing high catalytic activity and photoactivity, perovskite oxides are a class of promising materials for high-performance photocathode catalysts in a photoassisted lithium oxygen battery (LOB), which is still in its infancy. Herein, single-crystalline LaCoO3 (LCO) is successfully synthesized through a microwave-assisted approach and selenylated to simultaneously introduce anionic doping and oxygen vacancies, boosting not only the electrocatalytic activity toward reversible Li2O2 formation/decomposition, but also the photoactivity to further reduce the charge/discharge polarization. As a result, LOBs utilizing Se-doped LCO as the photocathode catalyst demonstrate a superior performance under illumination in all aspects of energy efficiency, specific capacity, and cycling stability, ranking among the best reported in the literature for perovskite oxides. The photoenhanced charge kinetics is found to be correlated with the accelerated Li2O2 nucleation with lowered granule size, which is key to both the improved charge/discharge capacity and reversibility. The results underscore the tailoring of perovskite structure to aggrandize both the catalytic activity and photoactivity for concertedly promoting the kinetics of LOBs.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

Anchoring NiO Nanosheet on the Surface of CNT to Enhance the Performance of a Li-O2 Battery

Li₂O₂, as the cathodic discharge product of aprotic Li-O₂ batteries, is difficult to electrochemically decompose. Transition-metal oxides (TMOs) have been proven to play a critical role in promoting the formation and decomposition of Li₂O₂. Herein, a NiO/CNT catalyst was prepared by anchoring a NiO nanosheet on the surface of CNT. When using the NiO/CNT as a cathode catalyst, the Li-O₂ battery had a lower overpotential of 1.2 V and could operate 81 cycles with a limited specific capacity of 1000 mA h g⁻¹ at a current density of 100 mA g⁻¹. In comparison, with CNT as a cathodic catalyst, the battery could achieve an overpotential of 1.64 V and a cycling stability of 66 cycles. The introduction of NiO effectively accelerated the generation and decomposition rate of Li₂O₂, further improving the battery performance. SEM and XRD characterizations confirmed that a Li₂O₂ film formed during the discharge process and could be fully electrochemical decomposed in the charge process. The internal network and nanoporous structure of the NiO/CNT catalyst could provide more oxygen diffusion channels and accelerate the decomposition rate of Li₂O₂. These merits led to the Li-O₂ battery’s better performance.