Adhesive and tough hydrogels: from structural design to applications

An in situ forming cartilage matrix mimetic hydrogel scavenges ROS and ameliorates osteoarthritis after superficial cartilage injury

Superficial cartilage defects represent the most prevalent type of cartilage injury encountered in clinical settings, posing significant treatment challenges. Here, we fabricated a cartilage extracellular matrix mimic hydrogel (GHC, consisting of Gelatin, Hyaluronic acid, and Chondroitin sulfate) to avoid the exacerbation of cartilage deterioration, which is often driven by the accumulation of reactive oxygen species (ROS) and a pro-inflammatory microenvironment. The GHC hydrogel exhibited multifunctional properties, including in situ formation, tissue adhesiveness, anti-ROS capabilities, and the promotion of chondrogenesis. The enhancement of tissue adhesion was achieved by chemically modifying hyaluronic acid and chondroitin sulfate with o-nitrobenzene, enabling a covalent connection to the cartilage surface upon light irradiation. In vitro characterization revealed that GHC hydrogel facilitated chondrocyte adhesion, migration, and differentiation into cartilage. Additionally, GHC hydrogels demonstrated the ability to scavenge ROS in vitro and inhibit the production of inflammatory factors by chondrocytes. In the animal model of superficial cartilage injury, the hydrogel effectively promoted cartilage ECM regeneration and facilitated the interface integration between the host tissue and the material. These findings suggest that the multifunctional GHC hydrogels hold considerable promise as a strategy for cartilage defect repair. STATEMENT OF SIGNIFICANCE: Superficial cartilage defects represent the most prevalent type of cartilage injury encountered in the clinic. Previous cartilage tissue engineering materials are only suitable for full-thickness cartilage defects or osteochondral defects. Here, we developed a multifunctional GHC hydrogel composed of gelatin, hyaluronic acid, and chondroitin sulfate, which are natural cartilage extracellular matrix components. The drug-free and cell-free hydrogel not only avoids immune rejection and drug toxicity, but also shows good mechanical properties and biocompatibility. More importantly, the GHC hydrogel could adhere tightly to the superficial cartilage defects and promote cartilage regeneration while protecting against oxidation. This natural ingredients and multifunctional hydrogel is a potential material for repairing superficial cartilage defects.

Soft Actuators and Actuation: Design, Synthesis, and Applications

Soft actuators are one of the most promising technological advancements with potential solutions to diverse fields' day-to-day challenges. Soft actuators derived from hydrogel materials possess unique features such as flexibility, responsiveness to stimuli, and intricate deformations, making them ideal for soft robotics, artificial muscles, and biomedical applications. This review provides an overview of material composition and design techniques for hydrogel actuators, exploring 3D printing, photopolymerization, cross-linking, and microfabrication methods for improved actuation. It examines applications of hydrogel actuators in biomedical, soft robotics, bioinspired systems, microfluidics, lab-on-a-chip devices, and environmental, and energy systems. Finally, it discusses challenges, opportunities, advancements, and regulatory aspects related to hydrogel actuators.

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Microbial fuel cells (MFCs) have the functions of wastewater treatment and power generation. The incorporation of modified anodes enhances the sustainable power generation performance of MFCs. In this study, to evaluate the feasibility of sodium alginate (SA) as a biocompatible binder, hydrogel mixed with super activated carbon (SAC) and SA was modified the carbon cloth anode of MFC. The results showed that the maximum output voltage in the SAC/SA hydrogel modified anode MFC was 0.028 V, which was increased by 115%, compared with the blank carbon cloth anode. The internal resistance of MFC was 9429 Ω, which was 18% lower than that of control (11560 Ω). The maximum power density was 6.14 mW/m2, which was increased by 365% compared to the control. After modification of SAC/SA hydrogel, the chemical oxygen demand (COD) removal efficiency reached to 56.36% and was 12.72% higher than the control. Coulombic efficiency with modified anode MFC reached 17.65%, which was increased by 104%, compared with the control. Our findings demonstrate the feasibility of utilizing SA as a biocompatible binder for anode modification, thereby imparting sustainable and enhanced power generation performance to MFCs. This study presented a new selectivity for harnessing algal bioresources and improving anode binders in future MFC applications.

A grape seed protein-tannic acid powder to transform various non-adhesive hydrogels into adhesive gels

Realizing adhesion between wet materials remains challenging because of the interfacial water. Current strategies depend on complicated surface modifications, resulting in limited functions. Herein, a facile strategy based on the powder of grape seed protein and tannic acid (GSP-TA) was reported to endow various non-adhesive hydrogels adhesion without chemical modifications for both hydrogels and adherents. The GSP-TA powder has the capability to absorb interfacial water, form an adhesive layer on the hydrogel surface, diffusion into the underneath hydrogel matrix, and establish the initial adhesion within 5 s. By forming multiple non-covalent interactions between powders and substrates, the GSP-TA powder served as an efficient surface treating agent, enabling robust adhesion to solid substrates (wood, cardboard, glass, iron, and rubber) and wet tissues (pigskin, muscle, liver and heart). The adhesive strength for wood, cardboard, glass, iron, and rubber was 145.92 ± 5.93, 123.93 ± 15.98, 66.24 ± 7.67, 98.22 ± 4.13, and 80.83 ± 7.48 kPa, respectively. Because of reversible interactions, the adhesion was also repeatable. Due to the merits of grape seed protein and plant polyphenol, it could be completely degraded within 11 days. Bearing several merits, this strategy has promising applications in wound patches, tissue repair, and sensors.

Synthesis of Topological Gels by Penetrating Polymerization Using a Molecular Net

Topological gels possess structures that are cross-linked only via physical constraints; ideally, no attractive intermolecular interactions act between their components, which yields interesting physical properties. However, most reported previous topological gels were synthesized based on supramolecular interlocked structures such as polyrotaxane, for which attractive intermolecular interactions are essential. Here, we synthesize a water-soluble "molecular net" (MN) with a large molecular weight and three-dimensional network structure using poly(ethylene glycol). When a water-soluble monomer (N-isopropylacrylamide) is polymerized in the presence of the MNs, the extending polymer chains penetrates the MNs to form an ideal topological MN gel with no specific attractive interactions between its components. The MN gels show unique physical properties as well a significantly high degree of swelling and high extensibility due to slipping of the physical cross-linking. We postulate this method to yield a new paradigm in gel science with unprecedented physical properties.

Magneto-Induced Janus Adhesive-Tough Hydrogels for Wearable Human Motion Sensing and Enhanced Low-Grade Heat Harvesting

Janus hydrogels with different properties on the two surfaces have considerable potential in the field of material engineering applications. Various Janus hydrogels have been developed, but there are still some problems, such as stress mismatch caused by the double-layer structure and Janus failure caused by material diffusion in the gradient structure. Here, we report a Janus adhesive-tough hydrogel with polydopamine-decorated Fe3O4 nanoparticles (Fe3O4@PDA) at one side induced by magnetic field to avoid uncontrollable material diffusion in the cross-linking polymerization of acrylamide with alginate-calcium. The magneto-induced Janus (MIJ) hydrogel has an adhesive surface and a tough bulk without an obvious interface to avoid stress mismatch. Due to the intrinsic dissipative matrix and the abundant catechol groups on the adhesive surface, it shows strong adhesion onto various substrates. The MIJ hydrogel has high sensitivity (GF = 0.842) in detecting tiny human motion. Owing to the synergy of Fe3O4@PDA-enhanced interfacial adhesion and heat transfer, it is possible to quickly generate effective temperature differences when adhering to human skin. The MIJ hydrogel achieves a Seebeck coefficient of 13.01 mV·K-1 and an output power of 462.02 mW·m-2 at a 20 K temperature difference. This work proposes a novel strategy to construct Janus hydrogels for flexible wearable devices in human motion sensing and low-grade heat harvesting.

Progress of Research on Conductive Hydrogels in Flexible Wearable Sensors

Conductive hydrogels, characterized by their excellent conductivity and flexibility, have attracted widespread attention and research in the field of flexible wearable sensors. This paper reviews the application progress, related challenges, and future prospects of conductive hydrogels in flexible wearable sensors. Initially, the basic properties and classifications of conductive hydrogels are introduced. Subsequently, this paper discusses in detail the specific applications of conductive hydrogels in different sensor applications, such as motion detection, medical diagnostics, electronic skin, and human-computer interactions. Finally, the application prospects and challenges are summarized. Overall, the exceptional performance and multifunctionality of conductive hydrogels make them one of the most important materials for future wearable technologies. However, further research and innovation are needed to overcome the challenges faced and to realize the wider application of conductive hydrogels in flexible sensors.

Biomimetic Gradient Hydrogels with High Toughness and Antibacterial Properties

Traditional hydrogels, as wound dressings, usually exhibit poor mechanical strength and slow drug release performance in clinical biomedical applications. Although various strategies have been investigated to address the above issues, it remains a challenge to develop a simple method for preparing hydrogels with both toughness and controlled drug release performance. In this study, a tannic acid-reinforced poly (sulfobetaine methacrylate) (TAPS) hydrogel was fabricated via free radical polymerization, and the TAPS hydrogel was subjected to a simple electrophoresis process to obtain the hydrogels with a gradient distribution of copper ions. These gradient hydrogels showed tunable mechanical properties by changing the electrophoresis time. When the electrophoresis time reached 15 min, the hydrogel had a tensile strength of 368.14 kPa, a tensile modulus of 16.17 kPa, and a compressive strength of 42.77 MPa. It could be loaded at 50% compressive strain and then unloaded for up to 70 cycles and maintained a constant compressive stress of 1.50 MPa. The controlled release of copper from different sides of the gradient hydrogels was observed. After 6 h of incubation, the hydrogel exhibited a strong bactericidal effect on Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, with low toxicity to NIH/3T3 fibroblasts. The high toughness, controlled release of copper, and enhanced antimicrobial properties of the gradient hydrogels make them excellent candidates for wound dressings in biomedical applications.

Glycopolymer-Based Antiswelling, Conductive, and Underwater Adhesive Hydrogels for Flexible Strain Sensor Application

With the fast development of soft electronics, underwater adhesion has become a highly desired feature for various sensing uses. Currently, most adhesive hydrogels are based on catechol-based structures, such as polydopamine, pyrogallol, and tannic acid, with very limited structural variety. Herein, a new type of glycopolymer-based underwater adhesive hydrogel has been prepared straightforwardly by random copolymerization of acrylic acid, acetyl-protected/unprotected glucose, and methacrylic anhydride in dimethyl sulfoxide (DMSO). By employing a DMSO-water solvent exchange strategy, the underwater adhesion was skillfully induced by the synergetic effects of hydrophobic aggregation and hydrogen bonding, leading to excellent adhesion behaviors on various surfaces, including pig skins, glasses, plastics, and metals, even after 5 days of storage in water. In addition, the underwater adhesive hydrogels with simple and low-cost protected/unprotected carbohydrate compositions showed good mechanical and rheological properties, together with cytocompatibility and antiswelling behavior in water, all of which are beneficial for underwater adhesions. In application as a flexible strain sensor, the adhesive hydrogel exhibited stable and reliable sensing ability for monitoring human motion in real time, suggesting great potential for intelligent equipment design.

Abdominal wall hernia repair: from prosthetic meshes to smart materials

Hernia reconstruction is one of the most frequently practiced surgical procedures worldwide. Plastic surgery plays a pivotal role in reestablishing desired abdominal wall structure and function without the drawbacks traditionally associated with general surgery as excessive tension, postoperative pain, poor repair outcomes, and frequent recurrence. Surgical meshes have been the preferential choice for abdominal wall hernia repair to achieve the physical integrity and equivalent components of musculofascial layers. Despite the relevant progress in recent years, there are still unsolved challenges in surgical mesh design and complication settlement. This review provides a systemic summary of the hernia surgical mesh development deeply related to abdominal wall hernia pathology and classification. Commercial meshes, the first-generation prosthetic materials, and the most commonly used repair materials in the clinic are described in detail, addressing constrain side effects and rational strategies to establish characteristics of ideal hernia repair meshes. The engineered prosthetics are defined as a transit to the biomimetic smart hernia repair scaffolds with specific advantages and disadvantages, including hydrogel scaffolds, electrospinning membranes, and three-dimensional patches. Lastly, this review critically outlines the future research direction for successful hernia repair solutions by combing state-of-the-art techniques and materials.

"Casein micelle -nanoparticle double cross-linking" triggered stable adhesive, tough CA/MWCNT/PAAm hydrogel wearable strain sensors, for human motion monitoring

Flexible hydrogels have emerged as highly-desirable materials for wearable strain sensors. However, pristine biomass hydrogel systems are limited by their lack of stretchability, self-adhesion, and sensitivity. Here, a novel CA/MWCNT/PAAm double-network conductive hydrogel was developed through integrating casein (CA) micelles and multi-walled carbon nanotubes (MWCNT) into the polyacrylamide (PAAm) network. The resulting hydrogel displayed desired properties such as adhesiveness, toughness, self-healing, and near-infrared photothermal response. In this hybrid system, MWCNT were uniformly dispersed in the presence of casein micelles through hydrogen bonding and electrostatic interactions, favoring its role of nano reinforcement. Moreover, based on the "casein micelle-nanoparticle double cross-linking" mechanism and its double network structure, the prepared hydrogel showed high extensibility (2288 % ± 63 %), fast responsiveness (273 ± 5.13 ms), high sensitivity (GF = 12.46 ± 0.35), and a wide strain range (1-1000 %). Through consistent and repeated electrical inputs, this hydrogel was able to detect including large and small human movements, such as hand, leg, and swallowing motions. The results from this study provide a new way to fabricate bio-based hydrogel sensors with excellent mechanical and electrical properties.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

Biomass-based hydrogels with high ductility, self-adhesion and conductivity inspired by starch paste for strain sensing

Currently, hydrogel sensors for health monitoring require external tapes, bandages or adhesives to immobilize them on the surface of human skin. However, these external fixation methods easily lead to skin allergic reactions and the decline of monitoring accuracy. A simple strategy to solve this problem is to endow hydrogel sensors with good adhesion. Inspired by the starch paste adhesion mechanism, a biomass-based hydrogel with good conductivity and high repetitive adhesion strength was prepared by introducing modified starch into polyacrylic acid hydrogel system. The properties of biomass-based hydrogels could be controlled by changing the proportion of amylose and amylopectin. The biomass-based hydrogel exhibited a variety of excellent properties, including good stretchability (1290 %), high adhesion strength (pig skin: 46.51 kPa) and conductivity (2.3 S/m). Noticeably, the repeated adhesive strength of biomass-based hydrogel did not decrease with the increase of adhesion times. The strain sensor based on the biomass-based hydrogel could accurately monitor the large-scale and small movements of the human body, and had broad application prospects in the field of flexible wearable devices.

Conductive Hydrogels with Ultrastretchability and Adhesiveness for Flame- and Cold-Tolerant Strain Sensors

Hydrogel strain sensors with extreme temperature tolerance have recently gained great attention. However, the sensing ability of these hydrogel strain sensors changes with temperature, resulting in the variety of output signals that causes signal distortion. In this study, double-network hydrogels comprising SiO₂ nanoparticles composed of polyacrylamide and phytic acid-doped polypyrrole were prepared and applied on strain sensors with a wide sensing range, high adhesiveness, and invariable strain sensitivity under flame and cold environments. The hydrogels had stable conductivity, excellent adhesive strength of up to 79.7 kPa on various substrates, and high elongation of up to 1896% at subzero temperature and after heating. They also exhibited effective flame retardancy with low surface temperature (71.2 °C) after 1200 s of heating (200 °C) and antifreezing properties at a low temperature of -20 °C. Remarkably, even under cold temperature and heat treatment, the hydrogel-based strain sensor displayed consistent sensing behaviors in detecting human motions with a broad strain range (up to 500%) and steady gauge factor (GF, ∼2.90). Therefore, this work paves the way for the applications of hydrogel sensors in robotic skin, human-mechanical interfaces, and health monitoring devices under harsh operating environments.

Switchable Adhesion: On-Demand Bonding and Debonding

Adhesives have a long and illustrious history throughout human history. The development of synthetic polymers has highly improved adhesions in terms of their strength and environmental tolerance. As soft robotics, flexible electronics, and intelligent gadgets become more prevalent, adhesives with changeable adhesion capabilities will become more necessary. These adhesives should be programmable and switchable, with the ability to respond to light, electromagnetic fields, thermal, and other stimuli. These requirements necessitate novel concepts in adhesion engineering and material science. Considerable studies have been carried out to develop a wide range of adhesives. This review focuses on stimuli-responsive material-based adhesives, outlining current research on switchable and controlled adhesives, including design and manufacturing techniques. Finally, the potential for smart adhesives in applications, and the development of future adhesive forms are critically suggested.

Gradient adhesion modification of polyacrylamide/alginate-calcium tough hydrogels

Strong hydrogel adhesion requires the synergy of adhesion and cohesion. Gradient adhesive-tough hydrogels can balance adhesion and cohesion, however, their construction is still a challenging task. Here, we used ethylenediaminetetraacetic acid (EDTA) on-side coordination-induced diffusion chelating Ca²⁺ to form an adhesive surface in a polyacrylamide/alginate-calcium (PAAm/Alg-Ca²⁺) tough hydrogel as a facile method for the construction of gradient adhesive-tough hydrogels. The adhesion energy of a gradient adhesive-tough hydrogel to skin is increased by 128% compared with PAAm/Alg-Ca²⁺ tough hydrogels and the elongation at break is two times higher than that of PAAm/Alg hydrogels. In addition, gradient adhesive-tough hydrogels also exhibit wide linear sensitivity (the gauge factor (GF) = 0.196 (0% < ε < 400%); GF = 0.260 (400% < ε < 650%)) as a wearable strain sensor to monitor human motions. This work provides a versatile strategy for the design of gradient adhesive-tough hydrogels and also provides a practical model for the development of wearable strain sensors.

Hydrogels for Treatment of Oral and Maxillofacial Diseases: Current Research, Challenge, and Future Directions

Oral and maxillofacial diseases such as infection and trauma often involve various organs and tissues, resulting in structural defects, dysfunctions and/or adverse effects on facial appearance. Hydrogels have been applied...