An electrochemical sensor for sensitive detection of dopamine based on a COF/Pt/MWCNT-COOH nanocomposite

Real samples sensitive dopamine sensor based on poly 1,3-benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)acetonitrile on a glassy carbon electrode

Herein, a novel electrochemical sensor that was used for the first time for sensitive and selective detection of dopamine (DA) was fabricated. The new sensor is based on the decoration of the glassy carbon electrode surface (GC) with a polymer film of 1,3-Benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)) acetonitrile (poly(BTCA). The prepared (poly(BTCA) was examined by using different techniques such as 1H NMR, 13C NMR, FTIR, and UV-visible spectroscopy. The electrochemical investigations of DA were assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results obtained showed that the modifier increased the electrocatalytic efficiency with a noticeable increase in the oxidation peak current of DA in 0.1 M phosphate buffer solution (PBS) at an optimum pH of 7.0 and scan rate of 200 mV/s when compared to unmodified GC. The new sensor displays a good performance for detecting DA with a limit of detection (LOD 3σ), and limit of quantification (LOQ 10σ) are 0.28 nM and 94 nM respectively. The peak current of DA is linearly proportional to the concentration in the range from 0.1 to 10.0 µM. Additionally, the fabricated electrode showed sufficient reproducibility, stability, and selectivity for DA detection in the presence of different interferents. The proposed poly(BTCA)/GCE sensor was effectively applied to detect DA in the biological samples.

Interfacial galvanic replacement strategy for Pd-doped NiFe MOF nanosheets with highly efficient dopamine detection

An interfacial galvanic replacement strategy to controllable synthesize palladium nanoparticles (Pd NPs)-modified NiFe MOF nanocomposite on nickel foam, which served as an efficient sensing platform for quantitative determination of dopamine (DA). Pd NPs grown in situ on the nanosheets of NiFe MOF via self-driven galvanic replacement reaction (GRR) and well uniform distribution was achieved. This method effectively reduced the aggregation of metallic nanoparticles and significantly promoted the electron transfer rate during the electrochemical process, leading to improved electrocatalytic activity for DA oxidation. Remarkably, the precisely constructed biosensor achieved a low detection limit (LOD) of 0.068 µM and recovery of 94.1% (RSD 6.7%, N = 3) for simulated real sample detection and also exhibited superior selectivity and stability. The results confirmed that the as-fabricated Pd-NiFe/NF composite electrode could realize the quantitative determination of DA and showed promising prospects in real sample biosensing.

Imine-linked covalent organic framework with high crystallinity for constructing sensitive purine bases electrochemical sensor

In this work, a covalent organic framework (TADM-COF) with high crystallinity and large specific surface area (2597 m2 g-1) has been successfully synthesized using 1,3,5-(4-aminophenyl) benzene (TAPB) and 2,5-dimethoxy-p-phenyldiformaldehyde (DMTP). The COF was grown in situ on oxide particles to form core-shell nanocomposites (SiO2@TADM COF, Fe3O4@TADM COF and Co3O4@TADM COF) to realize its function as a shell material. Among them, the Co3O4@TADM COF with the highest electrochemical response to purine bases was further cross-linked with multi-walled carbon nanotubes (MWCNT) to construct a novel electrochemical sensor (Co3O4@TADM COF/MWCNT/GCE) for detection of purine bases. In this nanocomposite, Co3O4 possesses rich catalytic active sites, MWCNT ensures superior electrical conductivity and COF provides a stable environment for electrocatalytic reactions as the shell. At the same time, regular pore structure of the COFs also offers smooth channels for the transfer of analytes to the catalytic site. The synergistic effect among the three components showed remarkable sensing performance for the simultaneous detection of guanine (G) and adenine (A) with a wide linear range of 0.6-180 μM and low limits of detection (LODs) of 0.020 μM for G and 0.024 μM for A (S/N = 3), respectively. The developed sensor platform was also successfully applied in the detection of purine bases in thermally denatured herring DNA extract. The work provided a general strategy for amplifying signal of COF and its composite in the electrochemical sensing.

Fouling-resistant electrode for electrochemical sensing based on covalent-organic frameworks TpPA-1 dispersed cabon nanotubes

The key problem that limits the practical applications of nonenzymatic electrochemical sensors in biological media, is the biofouling and chemical fouling of electrodes due to the adsorption of biological molecules and oxidation (reduction) products. Electrode fouling will cause low accuracy, poor stability, and low sensitivity. Here, a simple and efficient antifouling electrode was demonstrated for electrochemical sensing based on covalent-organic framework (COF) TpPA-1 and carboxylic multi-walled carbon nanotubes (CNT) composites. COF TpPA-1 possesses abundant hydrophilic groups, which assisted the dispersion of CNT in water and formed uniform composites by π-π interaction. In addition, the introduction of CNT into the composites improved the electron transfer rate of COF TpPA-1. The antifouling interface was characterized by electrochemistry, contact angle measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The electrode showed good chemical and bio-fouling resistant performance for the electrochemical detection of β-nicotinamide adenine dinucleotide (NADH) and uric acid (UA) in real serum samples.

Triple microenvironment modulation of zeolite imidazolate framework (ZIF) nanocages for boosting dopamine electrocatalysis

Multiple microenvironmental modulation of zeolite imidazole framework-8 (ZIF-8) is expected to solve the long-term intractable problem of low sensitivity in electrochemical sensing. Herein, the metal phthalocyanines with different central ions (PcM, M = Fe, Co, Ni and Cu) were introduced into ZIF-8 by in-situ synthesis method. Then, the hollow composite nanomaterials, HZIF-8/PcFe and HZIF-8@PcFe (HZIF-8, i.e., hollow ZIF-8) with different TA (tannic acid) coating thicknesses (∼11 nm and ∼33 nm) were successfully fabricated by carefully designed polyphenol-mediated modulation (PMM) strategy. Next, the HZIF-8@PcFe electrochemical sensor was constructed for selective and sensitive analysis by selecting dopamine (DA) as the analyte. The TA coating (superhydrophilic state), PcFe (redox properties) and hollow MOF cavity (faster mass transfer) was used as the triple microenvironment modulation of ZIF-8 to enhance the electrocatalytic performance. Under the optimum conditions (pH = 8.0), the linear correlations of 0.3 to 200 μmol/L was obtained for the peak current response, with a detection limit of 0.1 μmol/L (S/N = 3, i.e., Signal/Noise = 3). Meanwhile, the HZIF-8@PcFe electrochemical sensor exhibited excellent interference selectivity, reproducibility and stability, which enabled it to detect low abundance DA in real samples. And the F-test (homogeneity test of variance) and t-test (student's t test) statistical analyses were employed to enhance the accuracy of the actual samples' detection. This work will enlighten researchers working in the field of porous framework composites and open up new paths for the development of hollow MOFs hybrid materials in electrochemical sensing.

Bimetallic CoCu nanoparticles anchored on COF/SWCNT for electrochemical detection of carbendazim

Carbendazim (CBZ) is a widespread fungicide used in crop protection, but the CBZ residues in drinking water, fruits, and vegetables can also cause adverse impacts on public health due to direct exposure. In this paper, a ternary synergistic composite of bimetallic CoCu nanoparticles anchored on covalent organic framework/single-walled carbon nanotube (CoCu/COF/SWCNT) was prepared and further applied as an electrochemical sensing platform for detecting CBZ. The sensor showed a sensitive response performance toward CBZ oxidation, as a result of the enhanced charge transfer ability, large electrochemically active surface area, and high electro-catalytic activity from the rational integration of the ternary components in CoCu/COF/SWCNT. Under the optimal conditions, the proposed sensor exhibited a detection range of 0.001 to 10 μM and a limit detection of 0.65 nM for CBZ detection. In addition, the sensor displayed practical feasibility for the determination of CBZ in water and pear samples with a recovery of 96.1 % to 102.1 %.

Robust Zeolitic Tetrazole Framework for Electrocatalytic Dopamine Detection with High Selectivity

A novel zeolitic tetrazolate framework (ZTF-8) has been synthesized by solvent-free heat-assisted (70 °C) mechanochemical grinding of zinc acetate and 5-methyl tetrazole in the presence of NaOH powder. The structure of ZTF-8 adopts the zeolitic sodalite (SOD) topology with uncoordinated N-heteroatom sites and resembles the structure of the well-known zeolitic imidazole framework ZIF-8. ZTF-8 is exceptionally stable in 0.1 M aqueous acid and base solutions for 60 days at 25 °C. The unique structure with uncoordinated N-heteroatom active sites and exceptional stability of ZTF-8 facilitated the electrocatalytic oxidation of dopamine to dopamine quinone at neutral pH. Without any postsynthetic modification, ZTF-8 is directly used for the facile electrochemical detection of dopamine over a wide range of concentrations (5-550 μM) with a high sensitivity (2410.8 μA mM-1 cm-2). It also demonstrated promising selectivity over other interferents of similar oxidation potential, such as ascorbic acid and uric acid. The DFT study revealed that the ZTF-8 framework has a higher binding energy (-145.07 kJ/mol) and stronger interaction with dopamine than its isostructural ZIF-8 structure (-130.42 kJ/mol).

Direct glyphosate soil monitoring at the triazine-based covalent organic framework with the theoretical study of sensing principle

Covalent organic frameworks (COFs) are emerging as promising sensing materials due to their controllable structure and function properties, as well as excellent physicochemical characteristics. Here, specific interactions between a triazine-based COF and a mass-used herbicide - glyphosate (GLY) have been utilized to design a disposable sensing platform for GLY detection. This herbicide has been extensively used for decades, however, its harmful environmental impact and toxicity to humans have been recently proven, conditioning the necessity for the strict control and monitoring of its use and its presence in soil, water, and food. Glyphosate is an organophosphorus compound, and its detection in complex matrices usually requires laborious pretreatment. Here, we developed a direct, miniaturized, robust, and green approach for disposable electrochemical sensing of glyphosate, utilizing COF's ability to selectively capture and concentrate negatively charged glyphosate molecules inside its nanopores. This process generates the concentration gradient of GLY, accelerating its diffusion towards the electrode surface. Simultaneously, specific COF-glyphosate binding catalyses the oxidative cleavage of the C-P bond and, together with pore nanoconfinement, enables sensitive glyphosate detection. Detailed sensing principles and selectiveness were scrutinized using DFT-based modelling. The proposed electrochemical method has a linear working range from 0.1 μM to 10 μM, a low limit of detection of 96 nM, and a limit of quantification of 320 nM. The elaborated sensing approach is viable for use in real sample matrices and tested for GLY determination in soil and water samples, without pretreatment, preparation, or purification. The results showed the practical usefulness of the sensor in the real sample analysis and suggested its suitability for possible out-of-laboratory sensing.

Composite materials based on covalent organic frameworks for multiple advanced applications

Covalent organic frameworks (COFs) stand for a class of emerging crystalline porous organic materials, which are ingeniously constructed with organic units through strong covalent bonds. Their excellent design capabilities, and uniform and tunable pore structure make them potential materials for various applications. With the continuous development of synthesis technique and nanoscience, COFs have been successfully combined with a variety of functional materials to form COFs-based composites with superior performance than individual components. This paper offers an overview of the development of different types of COFs-based composites reported so far, with particular focus on the applications of COFs-based composites. Moreover, the challenges and future development prospects of COFs-based composites are presented. We anticipate that the review will provide some inspiration for the further development of COFs-based composites.

Preparation of Molecularly Imprinted Cysteine Modified Zinc Sulfide Quantum Dots Based Sensor for Rapid Detection of Dopamine Hydrochloride

By combining surface molecular imprinting technology with cysteine-modified ZnS quantum dots, an elegant, molecularly imprinted cysteine-modified Mn²⁺: ZnS QDs (MIP@ZnS QDs) based fluorescence sensor was successfully developed. The constructed fluorescence sensor is based on a molecularly imprinted polymer (MIP) coated on the surface cysteine-modified ZnS quantum dots and used for rapid fluorescence detection of dopamine hydrochloride. The MIP@ZnS quantum dots possess the advantages of rapid response, high sensitivity, and selectivity for the detection of dopamine hydrochloride molecules. Experimental results show that the adsorption equilibrium time of MIP@ZnS QDs for dopamine hydrochloride molecules is 12 min, and it can selectively capture and bind dopamine in the sample with an imprinting factor of 29.5. The fluorescence quenching of MIP@ZnS QDs has a good linear (R² = 0.9936) with the concentration of dopamine hydrochloride ranged from 0.01 to 1.0 μM, and the limit of detection is 3.6 nM. In addition, The MIP@ZnS QDs demonstrate good recyclability and stability and are successfully employed for detection of dopamine hydrochloride in urine samples with recoveries was 95.2% to 103.8%. The proposed MIP@ZnS QDs based fluorescent sensor provides a promising approach for food safety detection and drug analysis.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Vein-Like Ni-BTC@Ni3S4 with Sulfur Vacancy and Ni3+ Fabricated In Situ Etching Vulcanization Strategy for an Electrochemical Sensor of Dopamine

In this study, a novel Ni-BTC@Ni₃S₄ composite was fabricated by solvothermal reaction using an in situ etching vulcanization strategy and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and Brunauer-Emmett-Teller (BET) analyses. The existence of a sulfur vacancy and Ni³⁺ in the as-prepared vein-like Ni-BTC@Ni₃S₄ greatly promoted the electrochemical sensing activity of the materials. Herein, a simple electrochemical sensor (Ni-BTC@Ni₃S₄/CPE) has been fabricated and used for the detection of dopamine (DA). The current signal of the Ni-BTC@Ni₃S₄/CPE-modified electrode was linear with the concentration of DA in the range of 0.05-750 μM (R² = 0.9995) with a sensitivity of 560.27 μA·mM^-1·cm^-2 and a detection limit of 0.016 μM. At the same time, the sensor has good stability and anti-interference ability. This study could provide a new idea and strategy for the structural regulation of composite electrode-modified materials and sensitive sensing detection of small biological molecules.

Exploring maleimide-anchored halloysites as nanophotoinitiators for surface-initiated photografting strategies

Maleimide-functionalized HNTs (HNTs-I) were prepared and explored as a nanophotoinitiator. Vinyl monomers can be grafted onto the nanotubes following a spatially controllable, metal-free and non-contact photoinitiated approach. The obtained HNTs-I were further used in a 3D printing system to fabricate hydrogels with designed configurations.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.