Ir-Doped Core-Shell Hollow Heterogeneous Nanospindles for Electrocatalytic Oxygen Evolution Reaction

By utilizing Metal-organic framework (MOF) materials as a base, constructing electrocatalysts with heterogeneous structures offers advantages for catalyzing water splitting. In this study, a hollow heterogeneous nanocatalyst, Ir-MIL-88A@NiFe-LDHs, was prepared by growing a layered double hydroxides (LDHs) shell on MIL-88A substrate. The catalyst shows excellent oxygen evolution reaction (OER) performance in a 1.0 M KOH solution, requiring only 217 mV overpotential to achieve a current density of 10 mA cm-2 with a Tafel slope of 62.18 mV dec-1, indicating significant electrocatalytic performance and reaction kinetics characteristics. Furthermore, long-term OER testing also demonstrates the catalyst's outstanding stability. Emphasizing the interfacial interaction between MOF and LDHs, as well as the synergistic effect among Ni, Fe, and Ir elements, the study highlights how these factors collaboratively control the local electronic structure of the hollow Ir-MIL-88A@NiFe-LDHs, resulting in an efficient MOF-derived electrocatalyst.

Voltage activation induced MoO42- dissolution to enhance performance of iron doped nickel molybdate for oxygen evolution reaction

Transition metal-based precatalysts are typically voltage-activated before electrochemical testing in the condition of alkaline oxygen evolution reaction. Nevertheless, the impact of voltage on the catalyst and the anion dissolution is frequently disregarded. In this study, Fe-doped NiMoO4 (Fe-NiMoO4) was synthesized as a precursor through a straightforward hydrothermal method, and MoFe-modified Ni (oxygen) hydroxide (MoFe-NiOxHy) was obtained via cyclic voltammetry (CV) activation. The effects of voltage on Fe-NiMoO4 and the dissolved inactive MoO42- ions in the process were examined in relation to OER performance. It has demonstrated that the crystallinity of the catalyst is reduced by voltage, thereby enhancing its electrocatalytic activity. The electron distribution state can be adjusted during the application of voltage, leading to the generation of additional active sites and an acceleration in the reaction rate. Additionally, MoO42- exhibits potential dependence during its dissolution. In the OER process, the dissolution of MoO42- enhances the reconstruction degree of Fe-NiMoO4 into the active substance and expedites the formation of active Ni(Fe)OOH. Hence, the optimized MoFe-NiOxHy exhibited exceptional electrocatalytic performance, with a current density of 100 mA cm-2 achieved at an overpotential of only 256 mV. This discovery contributes to a more comprehensive understanding of alkaline OER performance under the influence of applied voltage and the presence of inactive oxygen ions, offering a promising avenue for the development of efficient electrocatalysts.

Designing highly efficient oxygen evolution reaction electrocatalyst of high-entropy oxides FeCoNiZrOx: Theory and experiment

The correlations between the experimental methods and catalytic activities are urgent to be defined for the design of highly efficient catalysts. In this work, a new oxygen evolution reaction electrocatalyst of high-entropy oxide (HEO) FeCoNiZrOx was designed and analyzed by experimental and theoretical methods. On account of the shortened coordinate bond along with the increased annealing temperature, the atomic/electronic structures of active site were adjusted quantitatively with the aid of the pre-designed correlator of d electron density, which contributed to adjust the catalytic activity of HEO specimens. The prepared HEO specimen exhibited the low overpotentials of 245 mV at 10 mA cm-2 and 288 mV at 100 mA cm-2 with small Tafel slope of 35.66 mV dec-1, fast charge transfer rate, and stable electrocatalytic activity. This strategy would be adopted to improve the catalytic activity of HEO by adjusting the d electron density of transition metal ions with suitable preparation method.

Heteroatom Doping Promoting CoP for Driving Water Splitting

CoP nanomaterials have been extensively regarded as one of the most promising electrocatalysts for overall water splitting due to their unique bifunctionality. Although the great promise for future applications, some important issues should also be addressed. Heteroatom doping has been widely acknowledged as a potential strategy for improving the electrocatalytic performance of CoP and narrowing the gap between experimental study and industrial applications. Recent years have witnessed the rapid development of heteroatom-doped CoP electrocatalysts for water splitting. Aiming to provide guidance for the future development of more effective CoP-based electrocatalysts, we herein organize a comprehensive review of this interesting field, with the special focus on the effects of heteroatom doping on the catalytic performance of CoP. Additionally, many heteroatom-doped CoP electrocatalysts for water splitting are also discussed, and the structure-activity relationship is also manifested. Finally, a systematic conclusion and outlook is well organized to provide direction for the future development of this interesting field.

Recent Progress on the Synthesis and Modified Strategies of Zeolitic-Imidazole Framework-67 Towards Electrocatalytic Oxygen Evolution Reaction

As a class of metal-organic framework, the zeolitic-imidazole framework-67 is constructed from bridging cobalt ions and 2-methylimidazole. The high content of abundant active cobalt species, uniform structure, ultrahigh porosity, and large surface area show the potential for multiple catalytic applications, especially electrocatalytic oxygen evolution reaction (OER). The design and synthetic strategies of catalyst-based ZIF-67 that approach the maximized catalytic performance are still challenging in further development. Herein, the current progress strategy on the structural design, synthetic route, and functionalization of electrocatalysts based on ZIF-67 to boost the catalytic performance of OER is reviewed. Besides, the structurally designed catalyst from various fabricated strategies corresponding to enhancing catalytic activity is discussed. The emphasized review for understanding design and synthetic structure with catalytic performance could guide researchers in further developing catalyst-based ZIF-67 for improving the efficient electrocatalytic OER.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

Pd-Based Metallenes for Fuel Cell Reactions

Pd-based metallenes, atomically thin layers composed primarily of under-coordinated Pd atoms, have emerged as the newest members in the family of two-dimensional (2D) nanomaterials. Moreover, the unique physiochemical properties, high intrinsic activity associated with metallenes coupled with the ease of applying chemical modifications result in great potential in catalyst engineering for fuel cell reactions. Especially in recent years, interest in Pd-based metallenes is growing, as evidenced by surge in available literatures. Herein, we have reviewed the recent findings achieved in Pd-based metallenes in fuel cells by highlighting the technologies available for deriving metallenes and manifesting the modification strategies for designing them to better suit the application demand. Moreover, we also discuss the perspective insights of Pd-based metallenes for fuel cells regarding the surfactant-free synthesis method, strain engineering, constructing high-entropy alloy, and so on.

Introducing Te for boosting electrocatalytic reactions

The deployment of robust catalysts for electrochemical reactions is a critical topic for energy conversion techniques. Te-based nanomaterials have attracted increasing attention for their application in electrochemical reactions due to their positive influence on the electrocatalytic performance induced by their distinctive electronic and physicochemical properties. Herein, we have summarized the recent progress on Te-based nanocatalysts for electrocatalytic reactions by primarily focusing on the positive influence of Te on electrocatalysts. Firstly, Te-based nanomaterials can serve as an ideal template for the construction of well-defined nanostructures. Secondly, Te doping can significantly modify the electronic structure of the host catalyst, thereby, leading to the optimization of binding strength with intermediates. Furthermore, the Te etching strategy can also create a high density of surface defects, thereby leading to substantial improvement in the electrocatalytic performance. Additionally, many representative Te-based nanocatalysts for electrocatalytic reactions are also summarized and systematically discussed. Finally, a conclusive and perspective discussion is also provided to provide guidance for the future development of more efficient electrocatalysts.

Dual-mode biosensing platform for sensitive and portable detection of hydrogen sulfide based on cuprous oxide/gold/copper metal organic framework heterojunction

Hydrogen sulfide (H2S) can not only be regarded as a critical gas signal transduction substance, but also its excess levels can lead to a range of diseases. Currently, the accurate analysis combined with electrochemical (EC) or photothermal (PT) technology for H2S in a complex biological system remains a significant challenge. Herein, an endogenous H2S-triggered heterojunction cuprous oxide/gold/copper metal organic framework (Cu2O/Au/HKUST-1) nanoprobe is designed for dual-mode EC- second near-infrared (NIR-II)/PT analysis in tumor cells with high sensitivity and simplicity. Dual-mode EC quantification - PT is achieved through "off-on" mode of EC and PT signals based on electronic transfer and biosynthesis via an in situ sulfuration reaction. Under the optimum conditions, the EC quantification mode for trace H2S exhibits a wide linear range and an excellent limit of detection of 0.1 μM. More importantly, the dual-mode can display the selective detection of trace H2S in living tumor cells because of the specific interaction between copper ion and H2S. These results provide a new EC-PT promising biosensing platform for noninvasive intelligent detection of H2S in living tumor cells.

Heterojunction MnO2-nanosheet-decorated Ag nanowires with enhanced oxidase-like activity for the sensitive dual-mode detection of glutathione

The biocatalytic design of nanomaterials with enzyme-like activity is considered a reliable and promising toolkit for the generation of diagnostic agents in complex biological microenvironments. However, the preparation of nanomaterials while maintaining a high catalytic activity in tumor cells (pH 6.0-6.5) poses a prominent challenge. Herein, we constructed a biomimetic enzyme-trigged dual-mode system with colorimetry at 652 nm and photothermal biosensors to detect glutathione based on hollow MnO₂-nanosheet-decorated Ag nanowires (Ag@MnO₂) as an oxidase-like nanozyme. As expected, Ag@MnO₂ catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the absence of H₂O₂, leading to a blue-colored oxidized TMB (oxTMB) that displayed oxidase-like activity in pH 6.0. Interestingly, the portable dual-mode colorimetry and photothermal method for GSH was developed based on the redox reaction between GSH and oxTMB. This detection method exhibited a wide linear range of 0.1-55 μM for GSH with a low detection limit of 0.08 μM. This work highlights a new insight into nanotechnology by taking advantage of biomimetic design in biological analysis.

Cation-Anion Dual Doping Modifying Electronic Structure of Hollow CoP Nanoboxes for Enhanced Water Oxidation Electrocatalysis

Tuning the electronic state of a nanocatalyst is of vital importance for elevating its catalytic performance toward oxygen evolution reaction (OER). Herein, a cation-anion dual doping strategy has been proposed for modifying the electronic structure of CoP via doping Fe and S atoms. Impressively, Fe doping has been demonstrated to be favorable for improving the carrier density of CoP to produce more hydroxyl radicals (^•OH), while S doping can further modify the electronic structure of CoP to improve the charge-transfer characteristics, thereby synergistically decreasing the energy barrier for the transformation of O* to OOH* and promoting the electrocatalytic OER performance. More importantly, the highly open nanobox structure is also beneficial for the exposure of more accessible catalytically active sites, which can substantially facilitate the electron and mass transport, leading to the superb catalytic OER performance. The successful modulation of OER performance via dual-doping strategy will pose a new strategy for designing more advanced nanocatalysts for energy-related catalysis process.

Biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation enabling sensitive detection of endogenous hydrogen sulfide with dual-readout signals

Hydrogen sulfide (H₂S) is a vital endogenous gas signal molecule undertaking numerous physiological functions such as biological regulation and cytoprotection. Herein, we developed an electrochemical (EC) and photothermal (PT) dual-readout signals method for H₂S detection based on a novel biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation strategy. Interestingly, the Cu²⁺-based Ni-Fe LDH (Ni-Fe-Cu LDH) can act as the Cu²⁺ source to react with H₂S, resulting in the in-situ generation of Cu_xS on Ni-Fe-Cu LDH surfaces. Because of the EC signal and intrinsic near-infrared (NIR) PT conversion ability of Cu_xS under 808 nm laser irradiation, the obtained Cu_xS@Ni-Fe-Cu LDH is applied to stimulate EC signal and temperature readout. By this means, a dual-readout signal mode is established for H₂S detection. Under the optimum conditions, this combination of EC and PT methods displays a wide linear range for H₂S to 0.1 μM-90 μM and 50 μM-400 μM, respectively, with a low detection limit of 0.09 μM. In addition, the practicality of Ni-Fe-Cu LDH is verified by determination of endogenous H₂S in living cells. This work not only provides a promising application for H₂S diagnosis but also exhibits the new characteristic of Ni-Fe-Cu LDH nanomaterials as signal transduction tags.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Recent advances in hollow nanomaterials with multiple dimensions for electrocatalytic water splitting

Electrocatalytic water splitting has great research prospects in the production of green hydrogen energy, and electrocatalysts are the prerequisite. As widely employed efficient electrocatalysts, hollow nanostructures have attracted a lot of research attention due to their excellent catalytic activity and structural stability. Moreover, the abundant catalytically active sites and tunable morphology also make hollow nanomaterials promising electrocatalysts for water splitting. Despite these advantages, the industrial applications of these hollow nanocatalysts are impeded by limitations like the lack of effective synthesis methods and unclear formation mechanisms. Therefore, extensive efforts have been devoted to the development of efficient synthesis strategies to boost the development of more efficient hollow electrocatalysts, and great progress has been achieved in recent years. To gain a better understanding of the rapid development of hollow nanocatalysts for water splitting, we herein organize a review to summarize the recent synthetic methods and advantages of hollow materials with different dimensions. The specific advantages of hollow nanomaterials in electrocatalytic water splitting, such as abundant active sites, a stable structure, high mass transfer efficiency, and reduced aggregation of catalytic particles, are also summarized. Finally, the challenges and prospects of hollow nanostructures with multiple dimensions in electrocatalytic water splitting are further explored.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Electrospun one-dimensional electrocatalysts for boosting electrocatalysis

Electrocatalytic reaction plays a crucial role in determining the energy conversion efficiency in advanced technology. However, it is limited by the sluggish reaction kinetics and high energy barrier. These shortcomings...