Pt- and Pd-modified transition metal nitride catalysts for the hydrogen evolution reaction

Restructuring and Hydrogen Evolution on Sub-Nanosized PdxBy Clusters

As a Pt-group element, Pd has been regarded as one of the alternatives to Pt-based catalysts for the hydrogen evolution reaction (HER). Herein, we performed density functional theory (DFT) computations to explore the most stable structures of PdxBy (x = 6, 19, 44), revealed the in situ structural reconstruction of these clusters under acidic conditions, and evaluated their HER activity. We found that the presence of B can prevent underpotential hydrogen adsorption and activate the H atoms on the cluster surface for the HER. The theoretical calculations show that the reaction barrier for the HER on ~1 nm sized Pd44B4 can be as low as 0.36 eV, which is even lower than for the same-sized Pt and Pd2B nanoparticles. The ultra-high HER activity of sub-nanosized PdxBy clusters makes them a potential new and efficient HER electro-catalyst. This study provides new ideas for evaluating and designing novel nanocatalysts based on the structural reconstruction of small-sized nanoparticles in the future.

Transition metal nitride catalysts for selective conversion of oxygen-containing molecules

Earth abundant transition metal nitrides (TMNs) are a promising group of catalysts for a wide range of thermocatalytic, electrocatalytic and photocatalytic reactions, with potential to achieve high activity and selectivity while reducing reliance on the use of Pt-group metals. However, current fundamental understanding of the active sites of these materials and the mechanisms by which selective transformations occur is somewhat lacking. Recent investigations of these materials from our group and others have utilized probe molecules, model surfaces, and in situ techniques to elucidate the origin of their activity, strong metal-support interactions, and unique d-band electronic structures. This Perspective discusses three classes of reactions for which TMNs have been used as case studies to highlight how these properties, along with synergistic interactions with metal overlayers, can be exploited to design active, selective and stable TMN catalysts. First, studies of the reactions of C1 molecules will be discussed, specifically highlighting the ability of TMNs to activate CO2. Second, the upgrading of biomass and biomass-derived oxygenates over TMN catalysts will be reviewed. Third, the use of TMNs for H2 production via water electrolysis will be discussed. Finally, we will discuss the challenges and future directions in the study of TMN catalysts, in particular expanding on opportunities to enhance fundamental mechanistic understanding using model surfaces, the elucidation of active centers via in situ techniques, and the development of efficient synthesis methods and design principles.

Pt nanoparticles anchored by oxygen vacancies in MXenes for efficient electrocatalytic hydrogen evolution reaction

The improvement of the hydrogen evolution reaction (HER) performance of nanomaterials is associated with the interfacial synergistic interaction and their hydrogen adsorption kinetics. Nevertheless, it is still a challenge to accelerate the proton transfer and optimize the HER kinetics by constructing Pt-supported heterostructures based on the hydrogen spillover phenomenon. Herein, oxygen vacancies on the surface of MXene nanosheets were constructed via a high-temperature annealing method, which was employed to anchor/stabilize Pt nanoparticles and fabricate a Pt/MXene heterostructure. EPR and XPS analyses verified the presence of oxygen vacancies, which could enhance the intrinsic HER activity of the MXene. The HER catalytic performance was investigated by taking into account the surface structure of the MXene affected by the annealing temperature, the concentration of Pt and the number of deposition cycles. Electrochemical results showed that Pt/MXene with higher utilization of Pt was obtained at 900 °C and 0.05 mgPt mL-1. The 0.05-Pt/MXene-900 obtained at deposition of 60 cycles in 0.5 M H2SO4 solution exhibited the optimized HER activity. The overpotential was 22 mV at a current density of 10 mA cm-2 and the Tafel slope was 42.41 mV dec-1. Furthermore, the accelerated HER kinetics was mainly due to the electron trapping ability of the MXene, small particles of Pt, as well as the enhanced charge transfer between the oxygen vacancies of the MXene and Pt. This strategy for constructing Pt-supported heterostructures based on the vacancy anchoring effects provides new ideas for the design of well-defined electrocatalysts toward the HER.

Heterointerface engineering of cobalt molybdenum suboxide for overall water splitting

Highly active and earth-abundant electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are of great significance for sustainable hydrogen generation through alkaline water electrolysis. Here, with an aim to enhance the bifunctional electrocatalytic activity of cobalt molybdate towards overall water splitting, we demonstrate a simple method involving the modulation of the cobalt to molybdenum ratio and creation of phase-modulated heterointerfaces. Samples with varying Co/Mo molar ratios are obtained via a microwave-assisted synthesis method using appropriate starting precursors. The synthesis conditions are modified to create a heterointerface involving multiple phases of cobalt molybdenum suboxides (CoO/CoMoO3/Co2Mo3O8) supported on Ni foam (NF). Detailed electrochemical studies reveal that modulating the composition and hence the interface can tweak the bifunctional electrocatalytic activity of the material for HER and OER and thus improve the overall water splitting efficiency with very high durability over 500 h. To further evaluate the practical applicability of the studied catalyst in water splitting, an alkaline electrolyser is fabricated with the optimized cobalt molybdenum suboxide material (CMO-1.25) as a bifunctional electrocatalyst. A current density of 220 mA cm-2 @1.6 V and 670 mA cm-2 @1.8 V was obtained, and the device showed very good long-term durability.

Recent Advances Regarding Precious Metal-Based Electrocatalysts for Acidic Water Splitting

Electrochemical water splitting has wide applicability in preparing high-density green energy. The Proton exchange membrane (PEM) water electrolysis system is a promising technique for the generation of hydrogen due to its high electrolytic efficiency, safety and reliability, compactness, and quick response to renewable energy sources. However, the instability of catalysts for electrochemical water splitting under operating conditions limits their practical applications. Until now, only precious metal-based materials have met the requirements for rigorous long-term stability and high catalytic activity under acid conditions. In this review, the recent progress made in this regard is presented and analyzed to clarify the role of precious metals in the promotion of the electrolytic decomposition of water. Reducing precious metal loading, enhancing catalytic activity, and improving catalytic lifetime are crucial directions for developing a new generation of PEM water electrolysis catalysts. A summary of the synthesis of high-performance catalysts based on precious metals and an analysis of the factors affecting catalytic performance were derived from a recent investigation. Finally, we present the remaining challenges and future perspectives as guidelines for practical use.

The High Electrocatalytic Performance of NiFeSe/CFP for Hydrogen Evolution Reaction Derived from a Prussian Blue Analogue

Non-noble-metal-based chalcogenides are promising candidates for hydrogen evolution reaction (HER) by harnessing the architectural design and the synergistic effect between the elements. Herein, a porous bimetallic selenide (NiFeSe) nanocube deposited on carbon fiber paper (NiFeSe/CFP) was synthesized through a facile selenization reaction based on Prussian blue analogues (PBAs) as precursors. The NiFeSe/CFP exhibited excellent HER activity with an overpotential of just 186 mV for a current density of 10 mA cm−2 in 1.0 M KOH at ambient temperature, similar to most of the state-of-the-art transition metal chalcogenides. The corresponding Tafel slope was calculated to be 52 mV dec−1, indicating fast discharge of the proton during the HER. Furthermore, the catalyst could endure long-term catalytic tests and showed remarkable durability. The enhanced electrocatalytic performance of NiFeSe/CFP is attributed to the unique 3D porous configuration inherited from the PBA templates, enhanced charge transfer occurring at the heterogeneous interface due to the synergistic effect between the bimetallic phases, and the high conductivity improved by the formation of amorphous carbon shells during the selenization. These findings prove that the combination of inexpensive metal–organic framework precursors and hybrid metallic compounds is a feasible way to realize the performance enhancement of non-noble-metal-based chalcogenides towards alkaline HER.