Color tunable of Ln-MOFs (Ln = Tb, Eu) and excellent stability for white light-emitting diode

Highly stable Tb(III) metal-organic framework derived from a new benzothiadiazole functionalized ligand for fluorescence recognition of ascorbic acid

Because ascorbic acid (AA) is one of the basic elements to maintain the normal physiological functions of human body, it is urgent to develop a material that can achieve efficient, rapid and in-situ detection for AA. A new fluorescence organic compound 4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-4-carboxylic acid) (H2BTBC) based on benzothiadiazole group has been synthesized, which can detect Fe3+ ions by fluorescence turn-off effect with a detection limit of 0.015 μM, as well as recognize linear amines by fluorescence turn-on effect. Moreover, a highly stable Tb(III) metal-organic framework has been solvothermally prepared with H2BTBC, namely {[(CH3)2NH2]2[Tb2(BTBC)4]∙solvents}n (JXUST-39), which can selectively detect AA among biological fluids by fluorescence enhancement effect with a detection limit of 0.077 μM. In addition, the mechanism for JXUST-39 detecting AA is possibly the cooperative effect of absorbance-caused enhancement and charge transfer between JXUST-39 and AA. Moreover, LED lamp beads, fluorescent films and fluorescent detection test paper based on JXUST-39 were prepared to achieve portable detection via fluorescence enhancement effect.

Dinuclear enantiopure Ln3+ complexes with (S-) and (R-) 2-phenylbutyrate ligands. Luminescence, CPL and magnetic properties

The reaction of Ln(NO3)2·6H2O (Ln = Nd, Sm, Eu, Tb, Dy, Tm and Yb) with the respective enantiopure (R)-(-)-2-phenylbutyric or (S)-(+)-2-phenylbutyric acid (R/S-2-HPhBut) and 4,7-diphenyl-1,10-phenanthroline (Bphen) allows the isolation of chiral dinuclear compounds of the formula [Ln2(μ-R/S-2-PhBut)4(R/S-2PhBut)2(Bphen)2] where Ln = Nd3+ (R/S-Nd-a), Sm3+ (R/S-Sm-a), Eu3+ (R/S-Eu-a), Tb3+ (R/S-Tb-a and R/S-Tb-b), Dy3+ (R/S-Dy-a and R/S-Dy-b), Tm3+ (R/S-Tm-b) and Yb3+ (R/S-Yb-b). Single crystal X-ray diffraction was performed for compounds S-Eu-a and S-Tm-b. Powder crystal X-ray diffraction was performed for all complexes. From the crystallographic data two different structural motifs were found which are referred to as structure type a and structure type b. In structure type a, the Ln3+ atoms are bridged through four R or S-2-PhBut ligands with two different kinds of coordination modes whereas in structure type b the two Ln3+ atoms are bridged through four R or S-2-PhBut ligands showing only one kind of coordination mode. For those lanthanide ions exhibiting both structure types, Tb3+ and Dy3+, a difference in the luminescence and magnetism behavior is observed. All compounds (except R/S-Tm-b) exhibit sensitized luminescence, notably the Eu3+ and Tb3+ analogues. Circular Dichroism (CD) and Circular Polarized Luminescence (CPL) in the solid state and in 1 mM dichloromethane (DCM) solutions are reported, leading to improved chiroptical properties for the DCM solutions. The asymmetry factor (glum) in 1 mM DCM is ±0.02 (+ for R-Eu-a) for the magnetically allowed transition 5D0 → 7F1 and ±0.03 (+ for R-Tb-a and R-Tb-b) for the 5D4 → 7F5 transition. Magnetic properties of all compounds were studied and the Dy3+ compound with the structural motif b (R-Dy-b) shows Single Molecular Magnet (SMM) behavior under a 0 T magnetic field. However, R-Dy-a is a field-induced SMM.

Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review

Metal-organic frameworks (MOFs) that are the wonder material of the 21st century consist of metal ions/clusters coordinated to organic ligands to form one- or more-dimensional porous structures with unprecedented chemical and structural tunability, exceptional thermal stability, ultrahigh porosity, and a large surface area, making them an ideal candidate for numerous potential applications. In this work, the recent progress in the design and synthetic approaches of MOFs and explore their potential applications in the fields of gas storage and separation, catalysis, magnetism, drug delivery, chemical/biosensing, supercapacitors, rechargeable batteries and self-powered wearable sensors based on piezoelectric and triboelectric nanogenerators are summarized. Lastly, this work identifies present challenges and outlines future opportunities in this field, which can provide valuable references.

Multifunctional Luminescent 3D Ln-MOFs with High Sensitivity for Trace Detection of Micronutrients

The synthesis of two versatile fluorescent metal-organic frameworks (MOFs), [Eu(4-NCP)(1,4-bdc)]n·0.5H2O (1) and [Eu(4-NCP)(4,4'-bpdc)]n·0.75H2O (2) (HNCP = 2-(4-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline, 1,4-H2bdc = benzene-1,4-dicarboxylic acid, 4,4'-H2bpdc = 4,4'-biphenyldicarboxylic acid), was carried out using a hydrothermal method. These MOFs were characterized through various advanced technologies to determine their structural information. The results indicate that both MOFs exhibited 3D network structures with specific topologies. Furthermore, these MOFs demonstrated exceptional thermal stabilities and adsorption capabilities. Additionally, complex 2 was utilized for studying the fluorescence sensing properties of various micronutrients including metal ions, nitro aromatic compounds, and biological small molecules. Notably, complex 2 showed promising potential as a multifunctional sensor for selectively detecting Fe3+, nitrobenzene, and ascorbic acid in aqueous solutions through fluorescence quenching with low limits of detection (LODs ∼ 10-7 M) and high quenching constants (Ksv ∼ 103 M-1). Moreover, the detection mechanism of complex 2 was further investigated by using experimental methods and DFT calculations.

Stable Europium(III) Metal-Organic Framework Demonstrating High Proton Conductivity and Fluorescence Detection of Tetracyclines

A europium(III) metal-organic framework (MOF), namely, {[[(CH₃)₂NH₂]₃Eu₂(DTTP-2OH)₂(HCOO)(H₂O)]·4H₂O}_n (Eu-MOF, H₄DTTP-2OH = 2',5'-dihydroxy-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid) has been assembled through solvothermal method. The Eu-MOF is a three-dimensional (3D) (4,4,8)-connected topological framework with binuclear Eu(III) clusters as secondary building units, in which a richly ordered hydrogen bonding network formed among the free H₂O molecules, dimethylamine cations, and phenolic hydroxyl groups provides a potential pathway for proton conduction. The proton conductivity reaches the category of superionic conductors (σ > 10^-4 S cm^-1) at room temperature with a maximum conductivity of 1.91 × 10^-3 S cm^-1 at 60 °C and 98% RH. Moreover, it also can be used as a fluorescence sensor in aqueous solution with detection limits of 0.14 μM for tetracycline, 0.13 μM for oxytetracycline and 0.11 μM for doxycycline. These results pave new methods for constructing MOFs with high proton conductivity and responsive fluorescence.

Tunable White Light Emission of a Metal-Organic Framework Based on a Bisquinoxaline Derivative by Introducing Red-Green Cationic Dyes

The unique structural advantages give metal-organic frameworks (MOFs) a special use as host substrates to encapsulate organic dyes, which would result in specific host-guest composites for white-light phosphors. In this work, an anionic MOF exhibiting blue emission was constructed using bisquinoxaline derivatives as photoactive centers, which could effectively encapsulate rhodamine B (Rh B) and acriflavine (AF) to form an In-MOF ⊃ Rh B/AF composite. By simply adjusting the amount of Rh B and AF, the emitting color of the resulting composite could be easily adjusted. The formed In-MOF ⊃ Rh B/AF composite exhibits broadband white light emission with ideal Commission International ed'Eclairage (CIE) coordinates of (0.34, 0.35), a color rendering index of 80.8, and a moderately correlated color temperature value of 5193.96 K. This strategy can be easily extended to other blue-emitting MOFs and dyes, thus opening up new prospects for the development of white-light-emitting materials.

Construction of High Quantum Yield Lanthanide Luminescent MOF Platform by In Situ Doping and Its Temperature Sensing Performance

Lanthanide luminescent MOF materials show excellent luminescent properties. However, obtaining lanthanide luminescent MOFs with high quantum yield is a challenging research. A novel bismuth-based metal-organic framework [Bi(SIP)(DMF)₂] was constructed by solvothermal method, utilizing 5-sulfoisophthalic acid monosodium salt (NaH₂SIP) and Bi(NO₃)₃·5H₂O. Thereafter, doped MOFs (Ln-Bi-SIP, Ln = Eu, Tb, Sm, Dy, Yb, Nd, Er) with different luminescent properties have been obtained by in situ doping with different lanthanide metal ions, among which Eu-Bi-SIP, Tb-Bi-SIP, Sm-Bi-SIP, and Dy-Bi-SIP have high quantum yield. What is special is that the doping amount of Ln³⁺ ions is very low, and the doped MOF can achieve high luminescence quantum yields. EuTb-Bi-SIP obtained by Eu³⁺/Tb³⁺ codoping and Dy-Bi-SIP exhibit good temperature sensing performance over a wide temperature range with the maximum sensitivity S_r of 1.6%·K^-1 (433 K) and 2.6%·K^-1, respectively (133 K), while the cycling experiments also show good repeatability in the assay temperature range. Finally, considering the practical application value, EuTb-Bi-SIP was blended with an organic polymer poly(methyl methacrylate) (PMMA) to produce a thin film, which shows different color changes at different temperatures.

Highly thermostable mixed lanthanide organic frameworks with high quantum yield for warm white light-emitting diodes

A mixed lanthanide organic framework was prepared via hydrothermal methods using m-phthalic acid (m-H₂BDC), 1,10-phenanthroline (1,10-Phen), and Ln³⁺ ions, formulated as [HNMe₂][Eu_0.095Tb_1.905(m-BDC)₃(phen)₂] (ZTU-6). The structure and stability of ZTU-6 were characterised by X-ray diffraction (XRD) and thermogravimetric analysis (TGA), which revealed a three-dimensional pcu topology with high thermal stability. Fluorescence tests showed that ZTU-6 emitted orange light with a high quantum yield of 79.15%, and it can be effectively encapsulated in a light-emitting diode (LED) device emitting orange light. In addition, ZTU-6 was found to be compatible with BaMgAl₁₀O₁₇:Eu²⁺ (BAM) blue powder and [(Sr,Ba)₂SiO₄:Eu²⁺] silicate yellow and green powder to create a warm white LED with a high colour rendering index (CRI) of 93.4, a correlated colour temperature (CCT) of 3908 K, and CIE coordinates of (0.38, 036).

Luminescence, CPL and magnetic properties of 1D enantiopure Ln3+ complexes with (S-) and (R-) α-methoxyphenylacetate ligand

The reaction of Ln(NO₃)₂·6H₂O (Ln = Eu, Tb, Dy and Sm) with (R)-(-)-α-methoxyphenylacetic acid (R-HMPA) and 1,10-phenanthroline (phen) in EtOH/H₂O allows the isolation of 1D chiral compounds of formula [Ln(μ-R-MPA)(R-MPA)₂(phen)]_n in which Ln = Eu (R-Eu), Tb (R-Tb), Dy (R-Dy) and Sm (R-Sm). The same synthesis by using (S)-(+)-α-methoxyphenylacetic acid (S-HMPA) instead of (R)-(-)-α-methoxyphenylacetic acid allows the isolation of the enantiomeric compounds with formula [Ln(μ-S-MPA)(S-MPA)₂(phen)]_n where Ln = Eu (S-Eu), Tb (S-Tb), Dy (S-Dy) and Sm (S-Sm). Single crystal X-Ray diffraction measurements were performed for compounds R/S-Eu, R/S-Tb, S-Dy and S-Sm. The luminescence and the circular dichroism measured in the solid state are reported. All compounds show sensitized luminescence, notably the Eu³⁺ and Tb³⁺ ones, whose emission color can be perceived by the naked eye. For the Eu³⁺ and Tb³⁺ derivatives the quantum yield and the circular polarized luminescence have been measured. For the magnetic allowed transition ⁵D₀ → ⁷F₁ of the Eu³⁺ compound, the anisotropy factor g_lum is ±0.013 (+for S-Eu). Also, magnetic properties of all compounds were studied with the Dy³⁺ analogue showing slow relaxation of the magnetization under a direct current magnetic field of 1000 Oe.