Metal-free cysteamine-functionalized graphene alleviates mutual interferences in heavy metal electrochemical detection

Sensitive and selective detection of heavy metal ions and organic pollutants with graphene-integrated sensing platforms

Graphene-based sensors have emerged as promising tools for environmental monitoring due to their exceptional properties such as high surface area, excellent electrical conductivity, and sensitivity to various analytes. This paper presents a review of recent advancements in the development and application of graphene-based sensors for the detection of heavy metal ions and organic pollutants. These sensors employ either graphene or its derivatives, often in combination with graphene hybrid nanocomposites, as the primary sensing material. The synthesis methods of graphene and sensing mechanisms of graphene-based sensors are discussed. Furthermore, performance metrics including the determination range and detection limits of these sensors are itemized. The potential challenges and future directions in the field of graphene-based sensors for environmental monitoring are also highlighted. Overall, this review provides valuable insights into the current state-of-the-art technologies and paves the way for the development of highly efficient and reliable sensors for environmental monitoring purposes.

A novel electrode for simultaneous detection of multiple heavy metal ions without pre-enrichment in food samples

Integrating a pre-enrichment step into electrochemical detection methodologies has traditionally been employed to enhance the performance of heavy metal detection. However, this augmentation also introduces a degree of intricacy into the sensing process and increases energy consumption. In this work, Mo-doped WO3 is grown in situ on carbon cloth by one-step electrodeposition. The electrode detect multiple heavy metal ions simultaneously in the range of 0.1-100.0 μM with LODs ranging from 11.2 to 17.1 nM. The electrode successfully detected heavy metal ions in diverse food samples. This pioneering detection strategy realized the direct and simultaneous detection of multiple heavy metal ions by utilizing the valence property of WO3 and oxygen vacancies generated by molybdenum doping. The Mo-WO3/CC pre-enrichment-free detection electrode boasts straightforward preparation, a streamlined detection procedure, swift response kinetics, and superior performance relative to previously reported electrodes, which makes it possible to develop a portable heavy metal ion detection device.

Thiol-based chemically modified carbon screen-printed electrode for simultaneous quantification of trace level Pb(II) and Cd(II)

Present work reports, the development of a novel electrochemical sensor based on a diazonium-coupling reaction and covalent attachment of the -NH2 group of cysteamine (Cyst) on screen-printed carbon electrode (SPCE), for simultaneous determination of Pb(II) and Cd(II). Initially, the in-situ generated 4-carboxyphenyl (4-CP) diazonium salt was electro-grafted to generate 4-CP/SPCE, followed by covalent bonding of terminal carboxylic group of 4-CP with -NH2 group of Cyst to give Cyst/4-CP/SPCE. The modified electrode showed an enhanced selectivity and sensitivity toward the quantification of Pb(II) and Cd(II) using square wave anodic stripping voltammetry (SWASV) without mutual interference. Under optimal experimental conditions, the newly designed sensor showed a wide linear range of 0.01 µM to 0.7 µM. The limit of detection (LOD) obtained was 0.882 nM (0.09 ppb) and 0.65 nM (0.134 ppb) for Cd(II) and Pb(II), respectively. The modified SPCE exhibited good stability, selectivity, and reproducibility. Furthermore, the sensor was successfully applied for the determination of Pb(II) and Cd(II) ions in water samples which illustrated excellent recoveries in different spiked samples and the results were in line with the standard ICP-AES analysis.

Graphene derivative-based ink advances inkjet printing technology for fabrication of electrochemical sensors and biosensors

The field of biosensing would significantly benefit from a disruptive technology enabling flexible manufacturing of uniform electrodes. Inkjet printing holds promise for this, although realizing full electrode manufacturing with this technology remains challenging. We introduce a nitrogen-doped carboxylated graphene ink (NGA-ink) compatible with commercially available printing technologies. The water-based and additive-free NGA-ink was utilized to produce fully inkjet-printed electrodes (IPEs), which demonstrated successful electrochemical detection of the important neurotransmitter dopamine. The cost-effectiveness of NGA-ink combined with a total cost per electrode of $0.10 renders it a practical solution for customized electrode manufacturing. Furthermore, the high carboxyl group content of NGA-ink (13 wt%) presents opportunities for biomolecule immobilization, paving the way for the development of advanced state-of-the-art biosensors. This study highlights the potential of NGA inkjet-printed electrodes in revolutionizing sensor technology, offering an affordable, scalable alternative to conventional electrochemical systems.

Research progress in the detection of trace heavy metal ions in food samples

Food safety is the basis for ensuring human survival and development. The threat of heavy metal ions to food safety has become a social concern with the rapid growth of the economy and the accompanying environmental pollution. Some heavy metal ions are highly toxic even at trace levels and pose significant health risks to humans. Therefore, ultrasensitive detection of heavy metal ions in food samples is important. In this mini-review, recent advances in the analytical methods based on nanomaterials for detecting trace heavy metal ions in food samples are summarized in three categories: electrochemical, colorimetric, and fluorescent methods. We present the features and sensing mechanisms of these three methods, along with typical examples to illustrate their application in the detection of heavy metal ions in foods. This mini-review ends with a discussion of current challenges and future prospects of these approaches for sensing heavy metal ions. The review will help readers understand the principles of these methods, thereby promoting the development of new analytical methods for the detection of heavy metal ions in food samples.

Diethylenetriamine-functionalized reduced graphene oxide having more amino groups for methylene blue removal

To obtain a high-performance amino-functionalized graphene, a new aminated graphene was prepared through a substitution reaction between chlorine-functionalized reduced graphene oxide and diethylenetriamine. The product exhibits high nitrogen content uniformly distributed in its sheets, with diethylenetriamine covalently attached to these sheets. The C-N bond in the product was certified by the Fourier transform infrared spectrum, which implies the successful attachment of diethylenetriamine to the graphene sheets. The average interlayer spacing is 0.42 nm. Diethylenetriamine features many more amino groups that act as ligands and spacers during adsorption and layer stacking processes. Compared with the adsorption capacities of reduced graphene oxide (77.1 mg g-1) and activated carbon (46.7 mg g-1), the product exhibits higher adsorption capacity (291.4 mg g-1). The adsorption process fits the quasi-first-order model and Langmuir model. Physical adsorption plays a primary role in the adsorption process. The amino group of the product easily reacts with other chemicals, making it a useful intermediate for other graphene materials.

Xylan derived carbon dots composite with PCL/PLA for construction biomass nanofiber membrane used as fluorescence sensor for detection Cu2+ in real samples

Water and soil pollution caused by Cu2+ is not conducive to sustainable development of environment and could cause damage to environment and even human body. Currently, fluorescent sensor solutions analysis method has been used for Cu2+ detection, but they also suffer from drawbacks including easy leakage, difficult storage, and inaccurate. Herein, a green solid-state biomass fluorescence platform (NBU-CDs) consisting of xylan-derived carbon dots (U-CDs) and polylactic acid/polycaprolactone (PLA/PCL) was designed by using in situ electrospinning technology. The prepared NBU-CDs fluorescence platform showed good fluorescence effect and can be served as fluorescence sensor for detecting Cu2+ with high sensitively, selectively and low detection limit (LOD = 0.83 μM). The practical applications of NBU-CDs exhibited high specificity for Cu2+ detection in zebrafish, water samples (school lake, Xuanwu Lake and Yangtze River) with high recovery rates of 97 %-104 % and soil (pond soil, grassland soil and bamboo soil) samples, respectively. The developed fluorescence platform was utilized to predict water and soil safety by monitoring Cu2+ concentration and provides a new strategy for Cu2+ detection.

Revealing the solid-solution interface interference behaviors between Cu2+ and As(III) via partial peak area analysis of simulations and experiments

The mutual interference in the sensing detection of heavy metal ions (HMIs) is considerably serious and complex. Besides, the co-existed ions may change the stripping peak intensity, shape and position of the target ion, which partly makes peak current analysis inaccurate. Herein, a promising approach of partial peak area analysis was proposed firstly to research the mutual interference. The interference between two species on their electrodeposition processes was investigated by simulating different kinetics parameters, including surface coverage, electro-adsorption, -desorption rate constant, etc. It was proved that the partial peak area is sensitive and regular to these interference kinetics parameters, which is favorable for distinctly identifying different interferences. Moreover, the applicability of the partial peak area analysis was verified on the experiments of Cu2+, As(III) interference at four sensing interfaces: glassy carbon electrode, gold electrode, Co3O4, and Fe2O3 nanoparticles modified electrodes. The interference behaviors between Cu2+ and As(III) relying on solid-solution interfaces were revealed and confirmed by physicochemical characterizations and kinetics simulations. This work proposes a new descriptor (partial peak area) to recognize the interference mechanism and provides a meaningful guidance for accurate detection of HMIs in actual water environment.

An ultrasensitive electrochemical sensor based on antimonene simultaneously detect multiple heavy metal ions in food samples

Here, we constructed a novel ultra-sensitive electrochemical sensor based on ZIF-67@antimonene (AMNFs) nanocomposites which are based on the first-principles density functional theory the adsorption properties of antimonene on heavy metal ions were studied for simultaneous determination of Cu²⁺, Pb²⁺ and Hg²⁺. The ZIF-67@AMNFs was prepared by using ZIF-67 MOF surface loaded with a large amount of antimonene sheet. Its morphology and crystal structure were characterized by Transmission electron microscope (TEM), Energy Dispersive Spectroscopy (EDS), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). Functional ZIF-67@AMNFs due to its unique layered structure, large active surface area, strong adsorption capacity and good electrical conductivity. In addition, the adsorption capacity of the sensor electrode for Cu²⁺, Pb²⁺ and Hg²⁺ was effectively enhanced. The detection limits of Cu²⁺, Pb²⁺ and Hg²⁺ were 0.01 pM, 0.042 pM and 0.031 pM, respectively. The determination mechanism of Cu²⁺, Pb²⁺ and Hg²⁺ was further clarified based on the adsorption properties and electrochemical accumulation of antimonene on metal atoms. It has been successfully applied to the simultaneous determination of Cu²⁺, Pb²⁺ and Hg²⁺ in rice, sorghum, corn, milk, honey and tea samples, and has good practicability.