Rational mechanochemical design of Diels-Alder crosslinked biocompatible hydrogels with enhanced properties

Molecular Ball Joints: Mechanochemical Perturbation of Bullvalene Hardy-Cope Rearrangements in Polymer Networks

The solution-state fluxional behavior of bullvalene has fascinated physical organic and supramolecular chemists alike. Little effort, however, has been put into investigating bullvalene applications in bulk, partially due to difficulties in characterizing such dynamic systems. To address this knowledge gap, we herein probe whether bullvalene Hardy-Cope rearrangements can be mechanically perturbed in bulk polymer networks. We use dynamic mechanical analysis to demonstrate that the activation barrier to the glass transition process is significantly elevated for bullvalene-containing materials relative to "static" control networks. Furthermore, bullvalene rearrangements can be mechanically perturbed at low temperatures in the glassy region; such behavior facilitates energy dissipation (i.e., increased hysteresis energy) and polymer chain alignment to stiffen the material (i.e., increased Young's modulus) under load. Computational simulations corroborate our work that showcases bullvalene as a reversible "low-force" covalent mechanophore in the modulation of viscoelastic behavior.

Experimental observation of near-wall effects during the puncture of soft solids

Performing conventional mechanical characterization techniques on soft materials can be challenging due to issues such as limited sample volumes and clamping difficulties. Deep indentation and puncture is a promising alternative as it is an information-rich measurement with the potential to be performed in a high-throughput manner. Despite its promise, the method lacks standardized protocols, and open questions remain about its possible limitations. Addressing these shortcomings is vital to ensure consistent methodology, measurements, and interpretation across samples and labs. To fill this gap, we examine the role of finite sample dimensions (and by extension, volume) on measured forces to determine the sample geometry needed to perform and unambiguously interpret puncture tests. Through measurements of puncture on a well-characterized elastomer using systematically varied sample dimensions, we show that the apparent mechanical response of a material is in fact sensitive to near-wall effects, and that additional properties, such as the sliding friction coefficient, can only be extracted in the larger dimension case where such effects are negligible.

Chemical and Biological Engineering Strategies to Make and Modify Next-Generation Hydrogel Biomaterials

There is a growing interest in the development of technologies to probe and direct in vitro cellular function for fundamental organoid and stem cell biology, functional tissue and metabolic engineering, and biotherapeutic formulation. Recapitulating many critical aspects of the native cellular niche, hydrogel biomaterials have proven to be a defining platform technology in this space, catapulting biological investigation from traditional two-dimensional (2D) culture into the 3D world. Seeking to better emulate the dynamic heterogeneity characteristic of all living tissues, global efforts over the last several years have centered around upgrading hydrogel design from relatively simple and static architectures into stimuli-responsive and spatiotemporally evolvable niches. Towards this end, advances from traditionally disparate fields including bioorthogonal click chemistry, chemoenzymatic synthesis, and DNA nanotechnology have been co-opted and integrated to construct 4D-tunable systems that undergo preprogrammed functional changes in response to user-defined inputs. In this Review, we highlight how advances in synthetic, semisynthetic, and bio-based chemistries have played a critical role in the triggered creation and customization of next-generation hydrogel biomaterials. We also chart how these advances stand to energize the translational pipeline of hydrogels from bench to market and close with an outlook on outstanding opportunities and challenges that lay ahead.

Designing Site Specificity in the Mechanochemical Cargo Release of Small Molecules

Mechanical force can trigger the predictable and precise release of small molecules from macromolecular carriers. In this article, based on mechanochemical simulations, we show that norborn-2-en-7-one (NEO), I, and its derivatives can selectively release CO, N₂, and SO₂ and produce two distinctly different products, A ((3E,5Z,7E)-dimethyl-5,6-diphenyldeca-3,5,7-triene-1,10-diyl bis(2-bromo-2-methylpropanoate)) and B (4',5'-dimethyl-4',5'-dihydro-[1,1':2',1''-terphenyl]-3',6'-diyl)bis(ethane-2,1-diyl) bis(2-bromo-2-methylpropanoate). Site-specific design in the pulling points (PP) ensures that by changing the regioselectivity, either A or B can be exclusively generated. Controlling the rigidity of the NEO scaffold by replacing a 6-membered ring with an 8-membered ring and concomitantly tuning the pulling groups makes it mechanolabile toward the selective formation of B. The diradical intermediate formed during I → A is predicted to be persistent for ∼150 fs. The structural design holds the key to the trade-off between mechanochemical rigidity and lability.

Strain-triggered acidification in a double-network hydrogel enabled by multi-functional transduction of molecular mechanochemistry

Recent work has demonstrated that force-triggered mechanochemical reactions within a polymeric material are capable of inducing measurable changes in macroscopic material properties, but examples of bulk property changes without irreversible changes in shape or structure are rare. Here, we report a double-network hydrogel that undergoes order-of-magnitude increases in acidity when strained, while recovering its initial shape after large deformation. The enabling mechanophore design is a 2-methoxy-gem-dichlorocyclopropane mechanoacid that is gated within a fused methyl methoxycyclobutene carboxylate mechanophore structure. This gated mechanoacid is incorporated via radical co-polymerization into linear and network polymers. Sonication experiments confirm the mechanical release of HCl, and single-molecule force spectroscopy reveals enhanced single-molecular toughness in the covalent strand. These mechanochemical functions are incorporated into a double-network hydrogel, leading to mechanically robust and thermally stable materials that undergo strain-triggered acid release. Both quasi-static stretching and high strain rate uniaxial compression result in substantial acidification of the hydrogel, from pH ∼ 7 to ∼5.

Engineering Hydrogels for Modulation of Dendritic Cell Function

Dendritic cells (DCs), the most potent antigen-presenting cells, are necessary for the effective activation of naïve T cells. DCs encounter numerous microenvironments with different biophysical properties, such as stiffness and viscoelasticity. Considering the emerging importance of mechanical cues for DC function, it is essential to understand the impacts of these cues on DC function in a physiological or pathological context. Engineered hydrogels have gained interest for the exploration of the impacts of biophysical matrix cues on DC functions, owing to their extracellular-matrix-mimetic properties, such as high water content, a sponge-like pore structure, and tunable mechanical properties. In this review, the introduction of gelation mechanisms of hydrogels is first summarized. Then, recent advances in the substantial effects of developing hydrogels on DC function are highlighted, and the potential molecular mechanisms are subsequently discussed. Finally, persisting questions and future perspectives are presented.

Nanocomposite multifunctional hyaluronic acid hydrogel with photothermal antibacterial and antioxidant properties for infected wound healing

Bacterial infection and subsequent reactive oxygen species (ROS) damage are major factors that delay wound healing in infected skin. Recently, photothermal therapy (PTT), as a new antibacterial method, has shown great advantages in the treatment of infected skin wound. Antibacterial and antioxidant hydrogels can reduce bacterial colonization and infection, scavenge ROS, relieve inflammation, and accelerate wound healing. In this study, an enzyme-crosslinked hyaluronic acid-tyramine (HT) hydrogel loaded with antioxidant and photothermal silver nanoparticles (AgNPs), named HTA, was developed as functional wound dressing to promote the infected skin wound healing. Natural antioxidant tannic acids (TA) were used as both reducing and stabilizing agents to facilely synthesize the silver nanoparticles capped with TA (AgNPs@TA). The incorporation of AgNPs@TA significantly enhanced the antioxidant, antibacterial, photothermal antibacterial, adhesive, and hemostatic abilities of the resulted HTA hydrogel. Besides, HTA hydrogel has rapid gelation, well injection and biocompatibility. In vivo results on the Staphylococcus aureus and Escherichia coli co-infected mouse skin wound model showed that HTA_0.4 (containing 0.4 mg/mL AgNPs@TA) hydrogel combined with near infrared ray radiation highly alleviated inflammation, promoted angiogenesis, and accelerated the healing process. Therefore, this nanocomposite hydrogel wound dressing with antibacterial and antioxidant capabilities has great application potential in the treatment of infected skin wounds.

How friction and adhesion affect the mechanics of deep penetration in soft solids

The mechanics of puncture and soft solid penetration is commonly explored with the assumption of frictionless contact between the needle (penetrator) and the specimen. This leads to the hypothesis of a constant penetration force. Experimental observations, however, report a linear increment of penetration force with needle tip depth. This force increment is due to friction and adhesion, and this paper provides its correlation with the properties of the cut material. Specifically, the force-depth slope depends on the rigidity and toughness of the soft material, the radius of the penetrator and the interfacial properties (friction and adhesion) between the two. We observe that adhesion prevails at relatively low toughness, while friction is dominant at high toughness. Finally, we compare our results with experiments and observe good agreement. Our model provides a valuable tool to predict the evolution of penetration force with depth and to measure the friction and adhesion characteristics at the needle-specimen interface from puncture experiments.

Dynamic Covalent Hydrogels: Strong yet Dynamic

Hydrogels are crosslinked polymer networks with time-dependent mechanical response. The overall mechanical properties are correlated with the dynamics of the crosslinks. Generally, hydrogels crosslinked by permanent chemical crosslinks are strong but static, while hydrogels crosslinked by physical interactions are weak but dynamic. It is highly desirable to create synthetic hydrogels that possess strong mechanical stability yet remain dynamic for various applications, such as drug delivery cargos, tissue engineering scaffolds, and shape-memory materials. Recently, with the introduction of dynamic covalent chemistry, the seemingly conflicting mechanical properties, i.e., stability and dynamics, have been successfully combined in the same hydrogels. Dynamic covalent bonds are mechanically stable yet still capable of exchanging, dissociating, or switching in response to external stimuli, empowering the hydrogels with self-healing properties, injectability and suitability for postprocessing and additive manufacturing. Here in this review, we first summarize the common dynamic covalent bonds used in hydrogel networks based on various chemical reaction mechanisms and the mechanical strength of these bonds at the single molecule level. Next, we discuss how dynamic covalent chemistry makes hydrogel materials more dynamic from the materials perspective. Furthermore, we highlight the challenges and future perspectives of dynamic covalent hydrogels.