Non-〈111〉-oriented semiconductor nanowires: growth, properties, and applications

Anisotropic crystal orientations dependent mechanical properties and fracture mechanisms in zinc blende ZnTe nanowires

The orientations of crystal growth significantly affect the operating characteristics of elastic and inelastic deformation in semiconductor nanowires (NWs). This work uses molecular dynamics simulation to extensively investigate the orientation-dependent mechanical properties and fracture mechanisms of zinc blende ZnTe NWs. Three different crystal orientations, including [100], [110], and [111], coupled with temperatures (100 to 600 K) on the fracture stress and elastic modulus, are thoroughly studied. In comparison to the [110] and [100] orientations, the [111]-oriented ZnTe NW exhibits a high fracture stress. The percentage decrease in fracture strength exhibits a pronounced variation with increasing temperature, with the highest magnitude observed in the [100] direction and the lowest magnitude observed in the [110] direction. The elastic modulus dropped by the largest percentage in the [111] direction as compared to the [100] direction. Most notably, the [110]-directed ZnTe NW deforms unusually as the strain rate increases, making it more sensitive to strain rate than other orientations. The strong strain rate sensitivity results from the unusual short-range and long-range order crystals appearing due to dislocation slipping and partial twinning. Moreover, the {111} plane is the principal cleavage plane for all orientations, creating a dislocation slipping mechanism at room temperature. The {100} plane becomes active and acts as another fundamental cleavage plane at increasing temperatures. This in-depth analysis paves the way for advancing efficient and reliable ZnTe NWs-based nanodevices and nanomechanical systems.

Crystal orientation-dependent tensile mechanical behavior and deformation mechanisms of zinc-blende ZnSe nanowires

Crystal deformation mechanisms and mechanical behaviors in semiconductor nanowires (NWs), in particular ZnSe NWs, exhibit a strong orientation dependence. However, very little is known about tensile deformation mechanisms for different crystal orientations. Here, the dependence of crystal orientations on mechanical properties and deformation mechanisms of zinc-blende ZnSe NWs are explored using molecular dynamics simulations. We find that the fracture strength of [111]-oriented ZnSe NWs shows a higher value than that of [110] and [100]-oriented ZnSe NWs. Square shape ZnSe NWs show greater value in terms of fracture strength and elastic modulus compared to a hexagonal shape at all considered diameters. With increasing temperature, the fracture stress and elastic modulus exhibit a sharp decrease. It is observed that the {111} planes are the deformation planes at lower temperatures for the [100] orientation; conversely, when the temperature is increased, the {100} plane is activated and contributes as the second principal cleavage plane. Most importantly, the [110]-directed ZnSe NWs show the highest strain rate sensitivity compared to the other orientations due to the formation of many different cleavage planes with increasing strain rates. The calculated radial distribution function and potential energy per atom further validates the obtained results. This study is very important for the future development of efficient and reliable ZnSe NWs-based nanodevices and nanomechanical systems.