Enhanced Catalysis of LIS3· Radical-to-Polysulfide Interconversion via Increased Sulfur Vacancies in Lithium–Sulfur Batteries

A Universal Electronic Structure Modulation Strategy: Is Strong Adsorption Always Correlated with High Catalysis?

Unveiling the inherent link between polysulfide adsorption and catalytic activity is key to achieving optimal performance in Lithium-sulfur (Li-S) batteries. Current research on the sulfur reaction process mainly relies on the strong adsorption of catalysts to confine lithium polysulfides (LiPSs) to the cathode side, effectively suppressing the shuttle effect of polysulfides. However, is strong adsorption always correlated with high catalysis? The inherent relationship between adsorption and catalytic activity remains unclear, limiting the in-depth exploration and rational design of catalysts. Herein, the correlation between "d-band center-adsorption strength-catalytic activity" in porous carbon nanofiber catalysts embedded with different transition metals (M-PCNF-3, M = Fe, Co, Ni, Cu) is systematically investigated, combining the d-band center theory and the Sabatier principle. Theoretical calculations and experimental analysis results indicate that Co-PCNF-3 electrocatalyst with appropriate d-band center positions exhibits moderate adsorption capability and the highest catalytic conversion activity for LiPSs, validating the Sabatier relationship in Li-S battery electrocatalysts. These findings provide indispensable guidelines for the rational design of more durable cathode catalysts for Li-S batteries.

Toward robust lithium-sulfur batteries via advancing Li2S deposition

Lithium-sulfur batteries (LSBs) with two typical platforms during discharge are prone to the formation of soluble lithium polysulfides (LiPS), leading to a decrease in the cycling life of the battery. Under practical working conditions, the transformation of S8 into Li2S is cross-executed rather than a stepwise reaction, where the liquid LiPS to solid Li2S conversion can occur at a high state of charge (SOC) to maintain the current requirement. Therefore, advancing Li2S deposition can effectively reduce the accumulation of LiPSs and ultimately improve the reaction kinetics. Herein, a "butterfly material" GeS2-MoS2/rGO is used as a sulfur host. Rich catalytic heterointerfaces can be obtained via the abundant S-S bonds formed between GeS2 and MoS2. MoS2 (left wing) can enhance LiPS adsorption, while the lattice-matching nature of Fdd2 GeS2 (right wing) and Fm3̄m Li2S can induce multiple nucleation and regulate the 3D growth of Li2S. Li2S deposition can be advanced to occur at 80% SOC, thereby effectively inhibiting the accumulation of soluble LiPSs. Attributed to the synergistic effect of catalytic and lattice-matching properties, robust coin and pouch LSBs can be achieved.

Undercoordination Chemistry of Sulfur Electrocatalyst in Lithium-Sulfur Batteries

Undercoordination chemistry is an effective strategy to modulate the geometry-governed electronic structure and thereby regulate the activity of sulfur electrocatalysts. Efficient sulfur electrocatalysis is requisite to overcome the sluggish kinetics in lithium-sulfur (Li-S) batteries aroused by multi-electron transfer and multi-phase conversions. Recent advances unveil the great promise of undercoordination chemistry in facilitating and stabilizing sulfur electrochemistry, yet a related review with systematicness and perspectives is still missing. Herein, it is carefully combed through the recent progress of undercoordination chemistry in sulfur electrocatalysis. The typical material structures and operational strategies are elaborated, while the underlying working mechanism is also detailly introduced and generalized into polysulfide adsorption behaviors, polysulfide conversion kinetics, electron/ion transport, and dynamic reconstruction. Moreover, perspectives on the future development of undercoordination chemistry are further proposed.

Elevating Lithium-Sulfur Battery Durability through Samarium Oxide/Ketjen Black Modified Separator

Lithium-sulfur batteries have garnered significant attention as a promising next-generation battery technology due to their potential for high energy density. However, their practical application is hampered by slow reaction kinetics and the shuttle effect of lithium polysulfide intermediates. In this context, the authors introduce a pioneering solution in the form of a novel porous carbon nanostructure modified with samarium oxide, denoted as Sm2O3/KB. The material has a highly polar surface, allowing lithium polysulfide to be chemisorbed efficiently. The unsaturated sites provided by the oxygen vacancies of Sm2O3 promote Li2S nucleation, lowering the reaction energy barrier and accelerating Li2S dissolution. The porous structure of Ketjen Black provides a highly conductive channel for electron transport and effectively traps polysulfides. Meanwhile, the batteries with Sm2O3/KB/PP spacers exhibited remarkable electrochemical performances, including a low-capacity decay rate of only 0.046 % for 1000 cycles at 2 C and an excellent multiplicative performance of 624 mAh g-1 at 3 C. This work opens up a new avenue for the potential use of rare-earth-based materials in lithium-sulfur batteries.

Accelerating Sulfur Redox Kinetics by Electronic Modulation and Drifting Effects of Pre-Lithiation Electrocatalysts

Efficient catalyst design is crucial for addressing the sluggish multi-step sulfur redox reaction (SRR) in lithium-sulfur batteries (LiSBs), which are among the promising candidates for the next-generation high-energy-density storage systems. However, the limited understanding of the underlying catalytic kinetic mechanisms and the lack of precise control over catalyst structures pose challenges in designing highly efficient catalysts, which hinder the LiSBs' practical application. Here, drawing inspiration from the theoretical calculations, the concept of precisely controlled pre-lithiation SRR electrocatalysts is proposed. The dual roles of channel and surface lithium in pre-lithiated 1T'-MoS2 are revealed, referred to as the "electronic modulation effect" and "drifting effect", respectively, both of which contribute to accelerating the SRR kinetics. As a result, the thus-designed 1T'-Lix MoS2 /CS cathode obtained by epitaxial growth of pre-lithiated 1T'-MoS2 on cubic Co9 S8 exhibits impressive performance with a high initial specific capacity of 1049.8 mAh g-1 , excellent rate-capability, and remarkable long-term cycling stability with a decay rate of only 0.019% per cycle over 1000 cycles at 3 C. This work highlights the importance of precise control in pre-lithiation parameters and the synergistic effects of channel and surface lithium, providing new valuable insights into the design and optimization of SRR electrocatalysts for high-performance LiSBs.

Embedding cobalt (II, III) oxide nanoparticles into nitrogen-doped carbon nanotubes-grafted hollow polyhedrons as sulfur hosts for ultralong-life lithium-sulfur batteries

The sluggish reaction kinetics and unfavorable shuttling effect are regarded as obstacles to the practical application of lithium-sulfur (Li-S) batteries. To resolve these inherent drawbacks, we synthesized novel multifunctional Co3O4@NHCP/CNT as the cathode materials consisting of carbon nanotubes (CNTs)-grafted N-doped hollow carbon polyhedrons (NHCP) embedded with cobalt (II, III) oxide (Co3O4) nanoparticles. The results indicate that the NHCP and interconnected CNTs could provide favorable channels for electron/ion transport and physically restrict the diffusion of lithium polysulfides (LiPSs). Furthermore, N doping and in-situ Co3O4 embedding could endow the carbon matrix with strong chemisorption and effective electrocatalytic activity toward LiPSs, thus prominently promoting the sulfur redox reaction. Benefiting from these synergistic effects, the Co3O4@NHCP/CNT electrode exhibits a high initial capacity of 1322.1 mAh/g at 0.1 C, and a capacity retention of 710.4 mAh/g after 500 cycles at 1 C. Impressively, even at a relatively high current density of 4 C, the Co3O4@NHCP/CNT electrode achieves a high capacity of 653.4 mAh/g and outstanding long-term cycle stability for 1000 cycles with a low decay rate of 0.035% per cycle. Hence, the design of N-doped CNTs-grafted hollow carbon polyhedrons coupled with transition metal oxides would provide effective promising perspective for developing high-performance Li-S batteries.

Stable Lithium-Sulfur Batteries Ensured by GeS2 and α-S8 Lattice Matching During the Charge Process

The charge process of lithium-sulfur batteries (LSBs) is a process in which molecular polarity decreases and the volume shrinks gradually, which is the process most likely to cause lithium polysulfides (LiPSs) loss and interfacial collapse. In this work, GeS2 is utilized, whose (111) lattice plane exactly matches with the (113) lattice of α-S8 , to solve these problems. GeS2 can regulate the interconversion-deposition behavior of S-species during the charge process. Soluble LiPSs can be spontaneously adsorbed on the GeS2 surface, then obtain electrons and eventually convert to α-S8 molecules. More importantly, the α-S8 molecules will crystallize uniformly along the (111) lattice plane of GeS2 to maintain a stable cathode-electrolyte interface. Therefore, outstanding charge/discharge LSBs are successfully accomplished.

Establishing Transition Metal Phosphides as Effective Sulfur Hosts in Lithium-Sulfur Batteries through the Triple Effect of "Confinement-Adsorption-Catalysis"

Structurally optimized transition metal phosphides are identified as a promising avenue for the commercialization of lithium-sulfur (Li-S) batteries. In this study, a CoP nanoparticle-doped hollow ordered mesoporous carbon sphere (CoP-OMCS) is developed as a S host with a "Confinement-Adsorption-Catalysis" triple effect for Li-S batteries. The Li-S batteries with CoP-OMCS/S cathode demonstrate excellent performance, delivering a discharge capacity of 1148 mAh g-1 at 0.5 C and good cycling stability with a low long-cycle capacity decay rate of 0.059% per cycle. Even at a high current density of 2 C after 200 cycles, a high specific discharge capacity of 524 mAh g-1 is maintained. Moreover, a reversible areal capacity of 6.56 mAh cm-2 is achieved after 100 cycles at 0.2 C, despite a high S loading of 6.8 mg cm-2 . Density functional theory (DFT) calculations show that CoP exhibits enhanced adsorption capacity for sulfur-containing substances. Additionally, the optimized electronic structure of CoP significantly reduces the energy barrier during the conversion of Li2 S4 (L) to Li2 S2 (S). In summary, this work provides a promising approach to optimize transition metal phosphide materials structurally and design cathodes for Li-S batteries.

A Radical Pathway and Stabilized Li Anode Enabled by Halide Quaternary Ammonium Electrolyte Additives for Lithium-Sulfur Batteries

Passivation of the sulfur cathode by insulating lithium sulfide restricts the reversibility and sulfur utilization of Li-S batteries. 3D nucleation of Li2 S enabled by radical conversion may significantly boost the redox kinetics. Electrolytes with high donor number (DN) solvents allow for tri-sulfur (S3 ⋅- ) radicals as intermediates, however, the catastrophic reactivity of such solvents with Li anodes pose a great challenge for their practical application. Here, we propose the use of quaternary ammonium salts as electrolyte additives, which can preserve the partial high-DN characteristics that trigger the S3 ⋅- radical pathway, and inhibit the growth of Li dendrites. Li-S batteries with tetrapropylammonium bromide (T3Br) electrolyte additive deliver the outstanding cycling stability (700 cycles at 1 C with a low-capacity decay rate of 0.049 % per cycle), and high capacity under a lean electrolyte of 5 μLelectrolyte  mgsulfur -1 . This work opens a new avenue for the development of electrolyte additives for Li-S batteries.

Insight into Accelerating Polysulfides Redox Kinetics by BN@MXene Heterostructure for Li-S Batteries

Sluggish redox kinetics and shuttle effect of polysulfides hinder the extensive application of the lithium-sulfur batteries (LSBs). Herein a functional heterostructure of boron nitride (BN) and MXene with an alternately layered structure (BN@MXene) is designed as separator interlayer. High efficiency Li+ transmission, uniform lithium deposition, strong adsorption, and efficient catalytic conversion activities of lithium polysulfides (LiPSs) realized by this heterostructure are confirmed by experiments and theoretical calculations. The alternately layered structure provides unblocked ion transmission channels and abundant active sites to accelerate the polysulfides redox kinetics with reduced energy barriers of oxidation and reduction reactions. As a result, the LSBs deliver an initial discharge capacity of up to 1273.9 mAh g-1 at 0.2 °C and a low decay of 0.058% per cycle in long-term cycling up to 700 cycles at 1 °C. This work provides an effective designing strategy to accelerate the polysulfides redox kinetics for advanced Li-S electrochemical system.

Synthesis of Deliquescent Lithium Sulfide in Air

In the field of lithium-sulfur batteries (LSBs) and all-solid-state batteries, lithium sulfide (Li2S) is a critical raw material. However, its practical application is greatly hindered by its high price due to its deliquescent property and production at high temperatures (above 700 °C) with carbon emission. Hereby, we report a new method of preparing Li2S, in air and at low temperatures (∼200 °C), which presents enriched and surprising chemistry. The synthesis relies on the solid-state reaction between inexpensive and air-stable raw materials of lithium hydroxide (LiOH) and sulfur (S), where lithium sulfite (Li2SO3), lithium thiosulfate (Li2S2O3), and water are three major byproducts. About 57% of lithium from LiOH is converted into Li2S, corresponding to a material cost of ∼$64.9/kg_Li2S, less than 10% of the commercial price. The success of conducting this water-producing reaction in air lies in three-fold: (1) Li2S is stable with oxygen below 220 °C; (2) the use of excess S can prevent Li2S from water attack, by forming lithium polysulfides (Li2Sn); and (3) the byproduct water can be expelled out of the reaction system by the carrier gas and also absorbed by LiOH to form LiOH·H2O. Two interesting and beneficial phenomena, i.e., the anti-hydrolysis of Li2Sn and the decomposition of Li2S2O3 to recover Li2S, are explained with density functional theory computations. Furthermore, our homemade Li2S (h-Li2S) is at least comparable with the commercial Li2S (c-Li2S), when being tested as cathode materials for LSBs.

Boosting Lean Electrolyte Lithium-Sulfur Battery Performance with Transition Metals: A Comprehensive Review

Lithium-sulfur (Li-S) batteries have received widespread attention, and lean electrolyte Li-S batteries have attracted additional interest because of their higher energy densities. This review systematically analyzes the effect of the electrolyte-to-sulfur (E/S) ratios on battery energy density and the challenges for sulfur reduction reactions (SRR) under lean electrolyte conditions. Accordingly, we review the use of various polar transition metal sulfur hosts as corresponding solutions to facilitate SRR kinetics at low E/S ratios (< 10 µL mg-1), and the strengths and limitations of different transition metal compounds are presented and discussed from a fundamental perspective. Subsequently, three promising strategies for sulfur hosts that act as anchors and catalysts are proposed to boost lean electrolyte Li-S battery performance. Finally, an outlook is provided to guide future research on high energy density Li-S batteries.

Vacancy designed 2D materials for electrodes in energy storage devices

Vacancies are ubiquitous in nature, usually playing an important role in determining how a material behaves, both physically and chemically. As a consequence, researchers have introduced oxygen, sulphur and other vacancies into bi-dimensional (2D) materials, with the aim of achieving high performance electrodes for electrochemical energy storage. In this article, we focused on the recent advances in vacancy engineering of 2D materials for energy storage applications (supercapacitors and secondary batteries). Vacancy defects can effectively modify the electronic characteristics of 2D materials, enhancing the charge-transfer processes/reactions. These atomic-scale defects can also serve as extra host sites for inserted protons or small cations, allowing easier ion diffusion during their operation as electrodes in supercapacitors and secondary batteries. From the viewpoint of materials science, this article summarises recent developments in the exploitation of vacancies (which are surface defects, for these materials), including various defect creation approaches and cutting-edge techniques for detection of vacancies. The crucial role of defects for improvement in the energy storage performance of 2D electrode materials in electrochemical devices has also been highlighted.

Mesoporous Carbon-Based Materials for Enhancing the Performance of Lithium-Sulfur Batteries

The most promising energy storage devices are lithium-sulfur batteries (LSBs), which offer a high theoretical energy density that is five times greater than that of lithium-ion batteries. However, there are still significant barriers to the commercialization of LSBs, and mesoporous carbon-based materials (MCBMs) have attracted much attention in solving LSBs' problems, due to their large specific surface area (SSA), high electrical conductivity, and other unique advantages. The synthesis of MCBMs and their applications in the anodes, cathodes, separators, and "two-in-one" hosts of LSBs are reviewed in this study. Most interestingly, we establish a systematic correlation between the structural characteristics of MCBMs and their electrochemical properties, offering recommendations for improving performance by altering the characteristics. Finally, the challenges and opportunities of LSBs under current policies are also clarified. This review provides ideas for the design of cathodes, anodes, and separators for LSBs, which could have a positive impact on the performance enhancement and commercialization of LSBs. The commercialization of high energy density secondary batteries is of great importance for the achievement of carbon neutrality and to meet the world's expanding energy demand.

Regulating the Anion Redox and Suppressing the Structural Distortion of Cation-Disordered Rock-Salt Cathode Materials to Improve Cycling Durability through Chlorine Substitution

Owing to the capacity boost from anion redox activities, cation-disordered rock-salt oxides are considered as potential candidates for the next-generation of high energy density Li-ion cathode materials. Unfortunately, the anion redox process that affords ultra-high specific capacity often triggers irreversible O₂ release, which brings about structural degradation and rapid capacity decay. In this study, we present a partial chlorine (Cl) substitution strategy to synthesize a new cation-disordered rock-salt compound of Li_1.225Ti_0.45Mn_0.325O_1.9Cl_0.1 and investigate the impact of Cl substitution on the oxygen redox process and the structural stability of cation-disordered rock-salt cathodes. We find that partial replacement of O^2- by Cl^- expands the cell volume and promotes anion redox reaction reversibility, thus increasing the Li⁺ ion diffusion rate and suppressing irreversible lattice oxygen loss. As a result, the Li_1.225Ti_0.45Mn_0.325O_1.9Cl_0.1 cathode exhibits significantly improved cycling durability at high current densities, compared with the pristine Li_1.225Ti_0.45Mn_0.325O₂ cathode. This work demonstrates the promising feasibility of the Cl substitution process for advanced cation-disordered rock-salt cathode materials.

Metal Coordinated Polymer as Three-Dimensional Network Binder for High Sulfur Loading Cathode of Lithium-Sulfur Battery

The construction of high sulfur (S) loading cathode is one of the critical parameters to obtain lithium-sulfur (Li-S) batteries with high energy density, but the slow redox reaction rate of high S loading cathode limits the development process. In this paper, a metal coordinated polymer-based three-dimensional network binder, which can improve the reaction rate and stability of S electrode. Compared with traditional linear polymer binders, the metal coordinated polymer binder can not only increase the load amount of S through the three-dimensional cross-linking, but also promote the interconversion reactions between S and lithium sulfide (Li₂ S), avoiding the passivation of electrode and improving the stability of the positive electrode. At an S load of 4-5 mg cm^-2 and an E/S ratio of 5.5 µL mg^-1 , the discharged voltage in the second platform is 2.04 V and the initial capacity is 938 mA h g^-1 with metal coordinated polymer binder. Moreover, the capacity retention rate approaches 87% after 100 cycles. In comparison, the discharged voltage in the second platform is lost and the initial capacity is 347 mA h g^-1 with PVDF binder. It demonstrates the advanced properties of metal-coordinated polymer binders for improving the performance of Li-S batteries.

Adaptively Reforming Natural Enzyme to Activate Catalytic Microenvironment for Polysulfide Conversion in Lithium-Sulfur Batteries

Catalyzing polysulfide conversion is a promising way toward accelerating complex and sluggish sulfur redox reactions (SRRs) in lithium-sulfur batteries. Reasonable alteration of an enzyme provides a new means to expand the natural enzyme universe to catalytic reactions in abiotic systems. Herein, we design and fabricate a denatured hemocyanin (DHc) to efficiently catalyze the SRR. After denaturation, the unfolded β-sheet architectures with exposed rich atomically dispersed Cu, O, and N sites and intermolecular H-bonds are formed in DHc, which not only provides the polysulfides for a strong spatial confinement effect in microenvironment via S-O and Li···N interactions but also activates chemical channels for electron/Li⁺ transport into the Cu active center via H/Li-bonds to catalyze polysulfide conversion. As expected, the charge/discharge kinetics of DHc-containing cathodes is fundamentally improved in cyclability with nearly 100% Coulombic efficiency and capacity even under high sulfur loading (4.3 mg cm^-2) and lean-electrolyte (8 μL mg^-1) conditions.