Investigations on sub-structures within cavities of surface imprinted polymers using AFM and PF-QNM

Template bacteria-free fabrication of surface imprinted polymer-based biosensor for E. coli detection using photolithographic mimics: Hacking bacterial adhesion

As one class of molecular imprinted polymers (MIPs), surface imprinted polymer (SIP)-based biosensors show great potential in direct whole-bacteria detection. Micro-contact imprinting, that involves stamping the template bacteria immobilized on a substrate into a pre-polymerized polymer matrix, is the most straightforward and prominent method to obtain SIP-based biosensors. However, the major drawbacks of the method arise from the requirement for fresh template bacteria and often non-reproducible bacteria distribution on the stamp substrate. Herein, we developed a positive master stamp containing photolithographic mimics of the template bacteria (E. coli) enabling reproducible fabrication of biomimetic SIP-based biosensors without the need for the "real" bacteria cells. By using atomic force and scanning electron microscopy imaging techniques, respectively, the E. coli-capturing ability of the SIP samples was tested, and compared with non-imprinted polymer (NIP)-based samples and control SIP samples, in which the cavity geometry does not match with E. coli cells. It was revealed that the presence of the biomimetic E. coli imprints with a specifically designed geometry increases the sensor E. coli-capturing ability by an "imprinting factor" of about 3. These findings show the importance of geometry-guided physical recognition in bacterial detection using SIP-based biosensors. In addition, this imprinting strategy was employed to interdigitated electrodes and QCM (quartz crystal microbalance) chips. E. coli detection performance of the sensors was demonstrated with electrochemical impedance spectroscopy (EIS) and QCM measurements with dissipation monitoring technique (QCM-D).

Surface-Imprinted Polysiloxane with Recognition Ability Based on an ITO Layer for Rapid Detection of Fusarium oxysporum f. sp. cubense by the Naked Eye

Direct observation by the naked eye of fluorescence-stained microbes adsorbed on surface imprinted polymers (SIPs) is highly challenging and limited by speed, accuracy and the semiquantitative nature of the method. In this study, we tested for the presence of spores of Fusarium oxysporum f. sp. cubense race 4 (Foc4), which cause severe banana Fusarium wilt disease and reduces the area of banana plants. This kind of spore can become dormant in soil, which means that the detection of secreted molecules (molecular imprinting) in soil may be inaccurate; detection methods such as polymerase chain reaction (PCR) and Raman spectroscopy are more accurate but time-consuming and inconvenient. Therefore, a semiquantitative and rapid SIP detection method for Foc4 was proposed. Based on the ITO conductive layer, a reusable and naked-eye-detectable Foc4-PDMS SIP film was prepared with a site density of approximately 9000 mm-2. Adsorption experiments showed that when the Foc4 spore concentration was between 104 to 107 CFU/mL, the number of Foc4 spores adsorbed and the fluorescence intensity were strongly correlated with the concentration and could be fully distinguished by the naked eye after fluorescence staining. Adsorption tests on other microbes showed that the SIP film completely recognized only the Foc series. All the results were highly consistent with the naked-eye observations after fluorescence staining, and the results of the Foc4-infected soil experiment were also close to the ideal situation. Taken together, these results showed that Foc4-PDMS SIPs have the ability to rapidly and semiquantitatively detect the concentration of Foc in soil, which can provide good support for banana cultivation. This method also has potential applications in the detection of other fungal diseases.

A Surface Imprinted Polymer EIS Sensor for Detecting Alpha-Synuclein, a Parkinson's Disease Biomarker

Parkinson's Disease (PD) is a debilitating neurodegenerative disease, causing loss of motor function and, in some instances, cognitive decline and dementia in those affected. The quality of life can be improved, and disease progression delayed through early interventions. However, current methods of confirming a PD diagnosis are extremely invasive. This prevents their use as a screening tool for the early onset stages of PD. We propose a surface imprinted polymer (SIP) electroimpedance spectroscopy (EIS) biosensor for detecting α-Synuclein (αSyn) and its aggregates, a biomarker that appears in saliva and blood during the early stages of PD as the blood-brain barrier degrades. The surface imprinted polymer stamp is fabricated by low-temperature melt stamping polycaprolactone (PCL) on interdigitated EIS electrodes. The result is a low-cost, small-footprint biosensor that is highly suitable for non-invasive monitoring of the disease biomarker. The sensors were tested with αSyn dilutions in deionized water and in constant ionic concentration matrix solutions with decreasing concentrations of αSyn to remove the background effects of concentration. The device response confirmed the specificity of these devices to the target protein of monomeric αSyn. The sensor limit of detection was measured to be 5 pg/L, and its linear detection range was 5 pg/L-5 µg/L. This covers the physiological range of αSyn in saliva and makes this a highly promising method of quantifying αSyn monomers for PD patients in the future. The SIP surface was regenerated, and the sensor was reused to demonstrate its capability for repeat sensing as a potential continuous monitoring tool for the disease biomarker.

Imprinting of nanoparticles in thin films: Quo Vadis?

Nanomaterials, and especially nanoparticles, have been introduced to almost any aspect of our lives. This has caused increasing concern as to their toxicity and adverse effects on the environment and human health. The activity of nanoparticles, including their nanotoxicity, is not only a function of the material they are made of but also their size, shape, and surface properties. It is evident that there is an unmet need for simple approaches to the speciation of nanoparticles, namely to monitor and detect them based on their properties. An appealing method for such speciation involves the imprinting of nanoparticles in soft matrices. The principles of imprinting nanoparticles originate from the molecularly imprinted polymer (MIP) approach. This review summarizes the current status of this emerging field, which bridges between the traditional MIP approach and the imprinting of larger entities such as viruses and bacteria. The concepts of nanoparticle imprinting and the requirement of both physical and chemical matching between the nanoparticles and the matrix are discussed and demonstrated.

Dual Synthetic Receptor-Based Sandwich Electrochemical Sensor for Highly Selective and Ultrasensitive Detection of Pathogenic Bacteria at the Single-Cell Level

Sensitive and rapid detection of pathogenic bacteria is essential for effective source control and prevention of microbial infectious diseases. However, it remains a substantial challenge to rapidly detect bacteria at the single-cell level. Herein, we present an electrochemical sandwich sensor for highly selective and ultrasensitive detection of a single bacterial cell based on dual recognition by the bacteria-imprinted polymer film (BIF) and aptamer. The BIF was used as the capture probe, which was in situ fabricated on the electrode surface within 15 min via electropolymerization. The aptamer and electroactive 6-(Ferrocenyl)hexanethiol cofunctionalized gold nanoparticles (Au@Fc-Apt) were employed as the signal probe. Once the target bacteria were anchored on the BIF-modified electrode, the Au@Fc-Apt was further specifically bound to the bacteria, generating enhanced current signals for ultrasensitive detection of Staphylococcus aureus down to a single cell in phosphate buffer solution. Even in the complex milk samples, the sensor could detect as low as 10 CFU mL^-1 of S. aureus without any complicated pretreatment except for 10-fold dilution. Moreover, the current response to the target bacteria was hardly affected by the coexisting multiple interfering bacteria, whose number is 30 times higher than the target, demonstrating the excellent selectivity of the sensor. Compared with most reported sandwich-type electrochemical sensors, this assay is more sensitive and more rapid, requiring less time (1.5 h) for the sensing interface construction. By virtue of its sensitivity, rapidity, selectivity, and cost-effectiveness, the sensor can serve as a universal detection platform for monitoring pathogenic bacteria in fields of food/public safety.

Dy(III)-coordination imprinted self-assembly microspheres based on a silica core for highly sensitive and selective detection of two carbamate pesticides

Carbamate (CB) pesticides possess potential carcinogenic and mutagenic activities towards humans even at very low dosages. Thus, broad-specificity probes with high sensitivity and speed are needed for multiple CB determination. This study is the first to focus on Dy³⁺ ions-coordinated self-assembly on a silica core using a surface imprinting procedure, for the simultaneous fluorometric detection of residues of metolcarb (MC) and pirimicarb (PC) insecticides. A simple and mild solvothermal method was applied for the preparation of fluorescent imprinted microspheres starting from 1,10-phenanthroline (Phen)-ligated Dy³⁺ ions to guide imprinted self-assembly of chitosan (CTS), glutaraldehyde (GA), and two carbamate pesticides (MC and PC) on the silica surface by means of coordinate bonds and hydrogen bonds. The as-prepared microspheres displayed strong fluorescence emissions via the antenna effect derived from the Phen ligand and the Schiff base oligomers for sensitizing the Dy³⁺ ions. An expanded in-depth mechanism study was performed on the fluorescence enhancement involving Förster resonance energy transfer (FRET) from the pesticides (donor) to the acceptor. A linear increase in fluorescence at 483 nm for MC and 574 nm for PC upon the imprinted microspheres was observed under the same 350 nm excitation wavelength. Moreover, the quantitative recognition process could be carried out simultaneously and tolerate strong distractions both from five other similar carbamate insecticides and from complicated matrices (e.g., an extract of Chrysanthemum morifolium Ramat). The detection limit was 4 ng mL^-1 with a range of 10-60 ng mL^-1 for MC and 0.4 ng mL^-1 with a range of 1-30 ng mL^-1 for PC. Further characterization of the material, including TEM, SEM, XPS, and FTIR, Raman, and fluorescence spectra, verified that the Dy³⁺ ions play a decisive role in promoting imprinted self-assembly around the silica core. Hence, a novel polynuclear Ln-organic imprinted probe having high selectivity, stability, and sensitivity for the detection of two carbamate insecticides is presented in this study.

Raman and Scanning Probe Microsocopy for differentiating surface imprints of E.coli and B.cereus

Molecularly imprinted polymers (MIPs) are artificial recognition materials mimicking biological recognition entities such as antibodies. The general model of imprinting assumes that functional monomers interact with functional groups present on...