Edge contacts accelerate the response of MoS2 photodetectors

A simple 230 MHz photodetector based on exfoliated WSe2 multilayers

We demonstrate 230 MHz photodetection and a switching energy of merely 27 fJ using WSe2 multilayers and a very simple device architecture. This improvement over previous, slower WSe2 devices is enabled by systematically reducing the RC constant of devices through decreasing the photoresistance and capacitance. In contrast to MoS2, reducing the WSe2 thickness toward a monolayer only weakly decreases the response time, highlighting that ultrafast photodetection is also possible with atomically thin WSe2. Our work provides new insights into the temporal limits of pure transition metal dichalcogenide photodetectors and suggests that gigahertz photodetection with these materials should be feasible.

CVD-Grown Monolayer MoS2 and GaN Thin Film Heterostructure for a Self-Powered and Bidirectional Photodetector with an Extended Active Spectrum

Photodetector technology has evolved significantly over the years with the emergence of new active materials. However, there remain trade-offs between spectral sensitivity, operating energy, and, more recently, an ability to harbor additional features such as persistent photoconductivity and bidirectional photocurrents for new emerging application areas such as switchable light imaging and filter-less color discrimination. Here, we demonstrate a self-powered bidirectional photodetector based on molybdenum disulfide/gallium nitride (MoS2/GaN) epitaxial heterostructure. This fabricated detector exhibits self-powered functionality and achieves detection in two discrete wavelength bands: ultraviolet and visible. Notably, it attains a peak responsivity of 631 mAW-1 at a bias of 0V. The device's response to illumination at these two wavelengths is governed by distinct mechanisms, activated under applied bias conditions, thereby inducing a reversal in the polarity of the photocurrent. This work underscores the feasibility of self-powered and bidirectional photocurrent detection but also opens new vistas for technological advancements for future optoelectronic, neuromorphic, and sensing applications.

Toward Gigahertz Photodetection with Transition Metal Dichalcogenides

ConspectusTransition metal dichalcogenides (TMDCs) exhibit favorable properties for optical communication in the gigahertz (GHz) regime, such as large mobilities, high extinction coefficients, cheap fabrication, and silicon compatibility. While impressive improvements in their sensitivity have been realized over the past decade, the bandwidths of these devices have been mostly limited to a few megahertz. We argue that this shortcoming originates in the relatively large RC constants of TMDC-based photodetectors, which suffer from high surface defect densities, inefficient charge carrier injection at the electrode/TMDC interface, and long charging times. However, we show in a series of papers that rather simple adjustments in the device architecture afford TMDC-based photodetectors with bandwidths of several hundreds of megahertz. We rationalize the success of these adjustments in terms of the specific physical-chemical properties of TMDCs, namely their anisotropic in-plane/out-of-plane carrier behavior, large optical absorption, and chalcogenide-dependent surface chemistry. Just one surprisingly simple yet effective pathway to fast TMDC photodetection is the reduction of the photoresistance by using light-focusing optics, which enables bandwidths of 0.23 GHz with an energy consumption of only 27 fJ/bit.By reflecting on the ultrafast intrinsic photoresponse times of a few picoseconds in TMDC heterostructures, we motivate the application of more demanding chemical strategies to exploit such ultrafast intrinsic properties for true GHz operation in real devices. A key aspect in this regard is the management of surface defects, which we discuss in terms of its dependence on the layer thickness, its tunability by molecular adlayers, and the prospects of replacing thermally evaporated metal contacts by laser-printed electrodes fabricated with inks of metalloid clusters. We highlight the benefits of combining TMDCs with graphene to heterostructures that exhibit the ultrafast photoresponse and large spectral range of Dirac materials with the low dark currents and high responsivities of semiconductors. We introduce the bulk photovoltaic effect in TMDC-based materials with broken inversion symmetry as well as a combination of TMDCs with plasmonic nanostructures as means for increasing the bandwidth and responsivity simultaneously. Finally, we describe the prospects of embedding TMDC photodetectors into optical cavities with the objective of tuning the lifetime of the photoexcited state and increasing the carrier mobility in the photoactive layer.The findings and concepts detailed in this Account demonstrate that GHz photodetection with TMDCs is feasible, and we hope that these bright prospects for their application as next-generation optoelectronic materials motivate more chemists and material scientists to actively pursue the development of the more complicated material combinations outlined here.

Plasma Processing and Treatment of 2D Transition Metal Dichalcogenides: Tuning Properties and Defect Engineering

Two-dimensional transition metal dichalcogenides (TMDs) offer fascinating opportunities for fundamental nanoscale science and various technological applications. They are a promising platform for next generation optoelectronics and energy harvesting devices due to their exceptional characteristics at the nanoscale, such as tunable bandgap and strong light-matter interactions. The performance of TMD-based devices is mainly governed by the structure, composition, size, defects, and the state of their interfaces. Many properties of TMDs are influenced by the method of synthesis so numerous studies have focused on processing high-quality TMDs with controlled physicochemical properties. Plasma-based methods are cost-effective, well controllable, and scalable techniques that have recently attracted researchers' interest in the synthesis and modification of 2D TMDs. TMDs' reactivity toward plasma offers numerous opportunities to modify the surface of TMDs, including functionalization, defect engineering, doping, oxidation, phase engineering, etching, healing, morphological changes, and altering the surface energy. Here we comprehensively review all roles of plasma in the realm of TMDs. The fundamental science behind plasma processing and modification of TMDs and their applications in different fields are presented and discussed. Future perspectives and challenges are highlighted to demonstrate the prominence of TMDs and the importance of surface engineering in next-generation optoelectronic applications.