Polyoxometalate-based frameworks for photocatalysis and photothermal catalysis

Hot Electrons Induced by Localized Surface Plasmon Resonance in Ag/g-C3N4 Schottky Junction for Photothermal Catalytic CO2 Reduction

Converting carbon dioxide (CO2) into high-value-added chemicals using solar energy is a promising approach to reducing carbon dioxide emissions; however, single photocatalysts suffer from quick the recombination of photogenerated electron-hole pairs and poor photoredox ability. Herein, silver (Ag) nanoparticles featuring with localized surface plasmon resonance (LSPR) are combined with g-C3N4 to form a Schottky junction for photothermal catalytic CO2 reduction. The Ag/g-C3N4 exhibits higher photocatalytic CO2 reduction activity under UV-vis light; the CH4 and CO evolution rates are 10.44 and 88.79 µmol·h-1·g-1, respectively. Enhanced photocatalytic CO2 reduction performances are attributed to efficient hot electron transfer in the Ag/g-C3N4 Schottky junction. LSPR-induced hot electrons from Ag nanoparticles improve the local reaction temperature and promote the separation and transfer of photogenerated electron-hole pairs. The charge carrier transfer route was investigated by in situ irradiated X-ray photoelectron spectroscopy (XPS). The three-dimensional finite-difference time-domain (3D-FDTD) method verified the strong electromagnetic field at the interface between Ag and g-C3N4. The photothermal catalytic CO2 reduction pathway of Ag/g-C3N4 was investigated using in situ diffuse reflectance infrared Fourier transform spectra (DRIFTS). This study examines hot electron transfer in the Ag/g-C3N4 Schottky junction and provides a feasible way to design a plasmonic metal/polymer semiconductor Schottky junction for photothermal catalytic CO2 reduction.

Enhanced performance of a Na3.5Co4[Bi2Co2W19.75O70(H2O)6]/porous graphitic carbon nitride heterojunction based photocatalyst realized by the addition of copper sulfide nanoparticles

Photocatalytic hydrogen (H2) evolution can effectively solve the global energy problem, in which the key factor is the synthesis of efficient photocatalytic materials. In this study, we successfully synthesized a novel photocatalyst, BiWCo/CuS/PGCN, by functionalizing porous graphitic carbon nitride (PGCN) with sandwich-type polyoxometalate Na3.5Co4[Bi2Co2W19.75O70(H2O)6]·39.5H2O (BiWCo) and introducing copper sulfide (CuS) nanoparticles as a cocatalyst. This approach was aimed at enhancing the built inner electric field between interfaces, resulting in a significant improvement in photocatalytic H2 evolution performance. This research adopts a step-by-step method to synthesize BiWCo/CuS/PGCN composites with p-n heterojunctions, which has high visible light absorption and a synergistic effect of multiple elements. PGCN with a high specific surface area contributes to the uniform distribution of active sites. In addition, the nano-CuS cocatalyst provides abundant active sites and more electron transfer pathways for photocatalysis. Therefore, the H2 production efficiency of BiWCo/CuS/PGCN is 6.3 times that of PGCN, 4.5 times that of BiWCo and 2.5 times that of BiWCo/PGCN under visible light. The H2 production rate of BiWCo/CuS/PGCN reaches 3477.58 μmol g-1 h-1. At the same time, the ternary photocatalyst shows high stability after 30 hours and 5 cycles. This work demonstrates that BiWCo/CuS/PGCN has good application prospects in H2 evolution, and provides a new strategy for the design of efficient ternary photocatalytic materials.

Crystalline nanosheets of three-dimensional supramolecular frameworks with uniform thickness and high stability

Fabricating three dimensional (3D) supramolecular frameworks (SMFs) into stable crystalline nanosheets remains a great challenge due to the homogeneous and weak inter-building block interactions along 3D directions. Herein, crystalline nanosheets of a 3D SMF with a uniform thickness of 4.8 ± 0.1 nm immobilized with Pt nanocrystals on the surface (Q[8]/Pt NSs) were fabricated via the solid-liquid reaction between cucurbit[8]uril/H2PtCl6 single crystals and hydrazine hydrate with the help of gas and heat yielded during the reaction process. A series of experiments and theoretical calculations reveal the ultrahigh stability of Q[8]/Pt NSs due to the high density hydrogen bonding interaction among neighboring Q[8] molecules. This in turn endows Q[8]/Pt NSs with excellent photocatalytic and continuous thermocatalytic CO oxidation performance, representing the thus-far reported best Pt nano-material-based catalysts.

Multi-stimuli-responsive polymer degradation by polyoxometalate photocatalysis and chloride ions

Photocatalytic polymer degradation based on harnessing the abundant light energy present in the environment is one of the promising approaches to address the issue of plastic waste. In this study, we developed a multi-stimuli-responsive photocatalytic polymer degradation system facilitated by the photocatalysis of a polyoxometalate [γ-PV2W10O40]5- in conjunction with chloride ions (Cl-) as harmless and abundant stimuli. The degradation of various polymers was significantly accelerated in the presence of Cl-, which was attributed to the oxidation of Cl- by the polyoxometalate photocatalysis into a highly reactive chlorine radical that can efficiently generate a carbon-centered radical for subsequent polymer degradation. Although organic and organometallic photocatalysts decomposed under the conditions for photocatalytic polymer degradation in the presence of Cl-, [γ-PV2W10O40]5- retained its structure even under these highly oxidative conditions.

Highly Stable 72-Nuclearity Nanocages for Efficient Synthesis of Aryl Nitriles via Ni/Cu Synergistic Catalysis

Seeking noble-metal-free catalysts for efficient synthesis of aryl nitriles under mild conditions poses a significant challenge due to the use of hypertoxic cyanides or high-pressure/temperature NH3/O2 in conventional synthesis processes. Herein, we developed a novel framework 1 assembled by [Ni72] nanocages with excellent solvents/pH stability. To investigate the structure-activity relationship of catalytic performance, several isostructural MOFs with different molar ratios of Ni/Cu by doping Cu2+ into framework 1 (Ni0.59Cu0.41 (2), Ni0.81Cu0.19 (3), Ni0.88Cu0.12 (4), and Ni0.92Cu0.08 (5)) were prepared. Catalytic studies revealed that catalyst 3 exhibited remarkable performance in the synthesis of aryl nitriles, utilizing a formamide alternative to hypertoxic NaCN/KCN. Notably, catalyst 3 achieved an excellent TOF value of 9.8 h-1. Furthermore, catalyst 3 demonstrated its applicability in a gram-scale experiment and maintained its catalytic performance even after six recycling cycles, owing to its high stability resulting from significant electrostatic and orbital interactions between the Ni center and ligands as well as a large SOMO-LUMO energy gap supported by DFT calculations. Control experiments and DFT calculations further revealed that the excellent catalytic performance of catalyst 3 originated from the synergistic effect of Ni/Cu. Importantly, this work not only provides a highly feasible method to construct highly stable MOFs containing multinuclear nanocages with exceptional catalytic performance but also represents the first example of a heterogeneous catalyst for the synthesis of aryl nitriles using formamide as the cyanide source.

Donor-Acceptor Assembly of Amphiphilic Molecules Based on 9,10-Distyrylanthracene Derivatives with Terminal Naphthalene Groups

Amphiphilic rod-coil compounds have excellent photophysical properties and can be assembled into supramolecular nanostructures of different sizes in water or polar solvents. Herein, we synthesized the amphiphilic compounds 2N-DSA, 4N-DSA, and 6N-DSA with 9,10-distyrylanthracene (DSA) as the core and a naphthalene unit as the terminal group that connected DSA through a tetraethylene glycol chain. These compounds have excellent aggregation-induced emission (AIE) properties in aqueous solution and are assembled into worm-like fragments or different sizes of spherical assemblies, defending the volume ratio of the rod to coil segments. Notably, the donor-acceptor interaction between DSA and electron- deficient compounds 2,4,6-trinitrophenol (TNP), 2,4,5,7-tetranitrofluorenone (TNF), and tetraethylene glycol dinitrobenzoate (TGDNB) forms a charge transfer complex, which can be used as a nanoreactor to improve the yield of the Suzuki coupling reaction about 8-10 times. The experimental results reveal that the synergy effect of the donor-acceptor, intermolecular π-π stacking, and hydrophobic-hydrophilic interactions significantly influences the morphology of aggregates and the efficiency of the nanoreactor.

An iron-containing POM-based hybrid compound as a heterogeneous catalyst for one-step hydroxylation of benzene to phenol

It is a major challenge to perform one-pot hydroxylation of benzene to phenol under mild conditions, which replaces the environmentally harmful cumene method. Thus, finding highly efficient heterogeneous catalysts that can be recycled is extremely significant. Herein, a (POM)-based hybrid compound {[FeII(pyim)2(C2H5O)][FeII(pyim)2(H2O)][PMoV2MoVI9VIV3O42]}·H2O (pyim = 2-(2-pyridyl)benzimidazole) (Fe2-PMo11V3) was successfully prepared by hydrothermal synthesis using typical Keggin POMs, iron ions and pyim ligands. Single-crystal diffraction shows that the Fe-pyim unit in Fe2-PMo11V3 forms a stable double-supported skeleton by Fe-O bonding to the polyacid anion. Remarkably, due to the introduction of vanadium, Fe2-PMo11V3 forms a divanadium-capped conformation. Benzene oxidation experiments indicated that Fe2-PMo11V3 can catalyze the benzene hydroxylation reaction to phenol in a mixed solution of acetonitrile and acetic acid containing H2O2 at 60 °C, affording a phenol yield of about 16.2% and a selectivity of about 94%.

One-Step Synthesis of Hollow CoS2 Spheres Derived from Polyoxometalate-Based Metal-Organic Frameworks with Peroxidase-like Activity

In this work, hollow CoS2 particles were prepared by a one-step sulfurization strategy using polyoxometalate-based metal-organic frameworks as the precursor. The morphology and structure of CoS2 have been monitored by scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The mechanism for the formation of CoS2 is discussed. The reaction time and sulfur content are found to be important factors that affect the morphology and pure phase formation of CoS2, and a hollow semioctahedral morphology of CoS2 with open voids was obtained when the sulfur source was twice as large as the precursor and the reaction time was 24 h. The CoS2 (24 h) particles show an excellent peroxidase-like activity for the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized (oxTMB) by hydrogen peroxide. The polyoxometalate used as a precursor helps to stabilize oxTMB during catalytic oxidation, forming a stable curve platform for at least 8 min. Additionally, the colorimetric detection of hydroquinone is developed with a low detection limit of 0.42 μM. This research provides a new strategy to design hollow materials with high peroxidase-mimicking activity.

A review of metal-organic framework (MOF) materials as an effective photocatalyst for degradation of organic pollutants

Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.

Highly efficient degradation of polyesters and polyethers by decatungstate photocatalysis

Photocatalytic polymer degradation has been recognized as a promising solution to the global disposal of waste plastics. In this work, we revealed that various polyesters and polyethers were efficiently degraded in the presence of a polyoxometalate photocatalyst, specifically, decatungstate ([W10O32]4-, W10). A catalytic amount of W10 initiated the degradation of various polyesters and polyethers under photo-irradiation with a xenon lamp (λ > 350 nm) using O2 (1 atm) as the oxidant in acetonitrile or water. Moreover, this system can promote polymer degradation even under sunlight. The degradation efficiency, assessed from the degradation rate (Mw0 - Mw)/Mw0 (%) (where Mw0 is the Mw before the reaction), of W10 was notably higher than those of previously reported photocatalysts such as titanium oxide, other polyoxometalates, organometallic compounds, and organic dyes.

Adsorption and Photocatalytic Degradation of Methylene Blue on TiO2 Thin Films Impregnated with Anderson-Evans Al-Polyoxometalates: Experimental and DFT Study

In this work, we fabricated a TiO2 thin film, and the same film was modified with an Anderson aluminum polyoxometalate (TiO2-AlPOM). Physical-chemical characterization of the catalysts showed a significant change in morphological and optical properties of the TiO2 thin films after surface modification. We applied the kinetic and isothermal models to the methylene blue (MB) adsorption process on both catalysts. The pseudo-second order model was the best fitting model for the kinetic results; qe (mg/g) was 11.9 for TiO2 thin films and 14.6 for TiO2-AlPOM thin films, and k2 (g mg-1 min-1) was 16.3 × 10-2 for TiO2 thin films and 28.2 × 10-2 for TiO2-AlPOM thin films. Furthermore, the Freundlich model was suitable to describe the isothermal behavior of TiO2, KF (5.42 mg/g), and 1/n (0.312). The kinetics of photocatalytic degradation was fitted using the Langmuir-Hinshelwood model; kap was 7 × 10-4 min-1 for TiO2 and 13 × 10-4 min-1 for TiO2-AlPOM. The comparative study showed that TiO2 thin films reach a 19.6% MB degradation under UV irradiation and 9.1% MB adsorption, while the TiO2-AlPOM thin films reach a 32.6% MB degradation and 12.2% MB adsorption on their surface. The surface modification improves the morphological, optical, and photocatalytic properties of the thin films. Finally, the DFT study supports all the previously shown results.