Germ-line transformation of the South American malaria vector, Anopheles albimanus, with a piggyBac/EGFP transposon vector is routine and highly efficient

Mosquito Embryo Microinjection

Genetically modified (GM) mosquitoes are an important tool in the fight against mosquito-borne disease, both indirectly through their use in research investigating host-pathogen interaction, mosquito olfaction, and anthropomorphic behavior and in future direct uses for suppression and possibly eradication through sterile insect technique (SIT) and/or gene-drive programs. Successful creation of GM mosquitoes depends on microinjection procedures that precisely deliver injection materials while causing as little damage to mosquito embryos as possible. Genetic modification reagents, such as transposon system components (vector plasmids, helper plasmids, and helper mRNA), and CRISPR-Cas9 components (guide RNAs, Cas9 protein, plasmids expressing Cas9 and/or guide RNAs, and donor plasmids used in homology-directed repair [HDR]), must be delivered into the preblastoderm embryo at the posterior end where the pole cells will form before cellularization occurs. Sharp needles that pierce the embryo easily are important tools in this procedure and work best when the embryos are not desiccated. The two main procedures for mosquito embryo microinjection involve injecting embryos under halocarbon oil or under aqueous solution.

Improved piggyBac Transformation with Capped Transposase mRNA in Pest Insects

Creating transgenic insects is a key technology in insect genetics and molecular biology. A widely used instrument in insect transgenesis is the piggyBac transposase, resulting in essentially random genomic integrations. In contrast, site-specific recombinases allow the targeted integration of the transgene construct into a specific genomic target site. Both strategies, however, often face limitations due to low transgenesis efficiencies. We aimed to enhance transgenesis efficiencies by utilizing capped mRNA as a source of transposase or recombinase instead of a helper plasmid. A systematic comparison of transgenesis efficiencies in Aedes mosquitoes, as models for hard-to-transform insects, showed that suppling piggyBac transposase as mRNA increased the average transformation efficiency in Aedes aegypti from less than 5% with the plasmid source to about 50% with mRNA. Similar high activity was observed in Ae. albopictus with pBac mRNA. No efficiency differences between plasmid and mRNA were observed in recombination experiments. Furthermore, a hyperactive version of piggyBac transposase delivered as a plasmid did not improve the transformation efficiency in Ae. aegypti or the agricultural pest Drosophila suzukii. We believe that the use of mRNA has strong potential for enhancing piggyBac transformation efficiencies in other mosquitoes and important agricultural pests, such as tephritids.

Establishment of highly efficient transgenic system for black soldier fly (Hermetia illucens)

The black soldier fly (BSF), Hermetia illucens, is a promising insect for mitigating solid waste problems as its larvae are able to bioconvert organic waste into valuable biomass. We recently reported a high-quality genome assembly of the BSF; analysis of this genome sequence will further the understanding of insect biology and identify genes that can be manipulated to improve efficiency of bioconversion. To enable genetic manipulation of the BSF, we have established the first transgenic methods for this economically important insect. We cloned and identified the ubiquitous actin5C promoter (Hiactin5C-p3k) and 3 endogenous U6 promoters (HiU6:1, HiU6:2, and HiU6:3). The Hiactin5C promoter was used to drive expression of a hyperactive variant of the piggyBac transposase, which exhibited up to 6-fold improvement in transformation rate when compared to the wild-type transposase. Furthermore, we evaluated the 3 HiU6 promoters using this transgenic system. HiU6:1 and HiU6:2 promoters provided the highest knockdown efficiency with RNAi and are thus promising candidates for future Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) development. Overall, our findings provide valuable genetic engineering toolkits for basic research and genetic manipulation of the BSF.

A perspective on the expansion of the genetic technologies to support the control of neglected vector-borne diseases and conservation

Genetic-based technologies are emerging as promising tools to support vector population control. Vectors of human malaria and dengue have been the main focus of these development efforts, but in recent years these technologies have become more flexible and adaptable and may therefore have more wide-ranging applications. Culex quinquefasciatus, for example, is the primary vector of avian malaria in Hawaii and other tropical islands. Avian malaria has led to the extinction of numerous native bird species and many native bird species continue to be threatened as climate change is expanding the range of this mosquito. Genetic-based technologies would be ideal to support avian malaria control as they would offer alternatives to interventions that are difficult to implement in natural areas, such as larval source reduction, and limit the need for chemical insecticides, which can harm beneficial species in these natural areas. This mosquito is also an important vector of human diseases, such as West Nile and Saint Louis encephalitis viruses, so genetic-based control efforts for this species could also have a direct impact on human health. This commentary will discuss the current state of development and future needs for genetic-based technologies in lesser studied, but important disease vectors, such as C. quinquefasciatus, and make comparisons to technologies available in more studied vectors. While most current genetic control focuses on human disease, we will address the impact that these technologies could have on both disease and conservation focused vector control efforts and what is needed to prepare these technologies for evaluation in the field. The versatility of genetic-based technologies may result in the development of many important tools to control a variety of vectors that impact human, animal, and ecosystem health.

Generation of Transgenic Mosquitoes Harboring a Replication-Restricted Virus

Live microbe vaccines are designed to elicit strong cellular and antibody responses without developing the symptoms of the disease, and these are effective in preventing infectious diseases. A flying vaccinator (also known as a flying syringe) is a conceptual, genetically engineered hematophagous insect that is used to deliver vaccines such as an antigen from a parasite produced in mosquito saliva; bites from such insects may elicit antibody production by immunizing the host with an antigen through blood-feeding. In addition to a simple vaccine antigen, a flying vaccinator may potentially load a live attenuated microbe with an appropriate mechanism for sustaining its constitutive proliferation in the insect. In this study, a recombinant vesicular stomatitis virus (VSV) lacking the glycoprotein gene (VSV-G) was used to produce replication-restricted VSV (rrVSV) containing GFP. Transgenic Anopheles stephensi mosquitoes, in which the salivary glands expressed a VSV-G gene driven by an aapp salivary gland-specific promoter, were generated and injected intraperitoneally with rrVSV. The injected rrVSV entered the cells of the salivary gland and stimulated endogenous production of progeny rrVSV particles, as seen in rrVSV-infected Drosophila melanogaster expressing VSV-G. These data suggested the possibility of developing a valuable tool for delivering genetically attenuated virus vaccines via mosquito saliva, although efficient replication-restricted virus production is required.

Mosquito transgenesis for malaria control

Malaria is one of the deadliest diseases. Because of the ineffectiveness of current malaria-control methods, several novel mosquito vector-based control strategies have been proposed to supplement existing control strategies. Mosquito transgenesis and gene drive have emerged as promising tools for preventing the spread of malaria by either suppressing mosquito populations by self-destructing mosquitoes or replacing mosquito populations with disease-refractory populations. Here we review the development of mosquito transgenesis and its application for malaria control, highlighting the transgenic expression of antiparasitic effector genes, inactivation of host factor genes, and manipulation of miRNAs and lncRNAs. Overall, from a malaria-control perspective, mosquito transgenesis is not envisioned as a stand-alone approach; rather, its use is proposed as a complement to existing vector-control strategies.

Genetic transformation of mosquitoes by microparticle bombardment

Mosquitoes constitute the major living beings causing human deaths in the world. They are vectors of malaria, yellow fever, dengue, zika, filariases, chikungunya, among other diseases. New strategies to control/eradicate mosquito populations are based on newly developed genetic manipulation techniques. However, genetic transformation of mosquitoes is a major technical bottleneck due to low efficiency, the need of sophisticated equipment, and highly trained personnel. The present report shows the transgenerational genetic transformation of Aedes aegypti, using the particle inflow gun (PIG), by integrating the ecfp gene in the AAEL000582 mosquito gene with the CRISPR-Cas9 technique, achieving a mean efficiency of 44.5% of bombarded individuals (G0) that showed ECFP expression in their tissues, and a mean of 28.5% transformation efficiency measured on G1 individuals. The same transformation technique was used to integrate the egfp/scorpine genes cloned in the Minos transposon pMinHygeGFP into the Anopheles albimanus genome, achieving a mean efficiency of 43.25% of bombarded individuals (G0) that showed EGFP expression in their tissues. Once the technique was standardized, transformation of Ae. aegypti neonate larvae and An. albimanus eggs was achieved when exposed to gold microparticle bombardment. Integration of genes and heterologous protein expression were confirmed by PCR, sequencing, fluorescent microscopy, mass spectrometry, Western blot and dot blot analyses. Transgenerational inheritance of the transgenes was observed only on Ae. aegypti, as all transformed An. albimanus individuals died at the pupal stage of the G0 generation.

Molecular tools and genetic markers for the generation of transgenic sexing strains in Anopheline mosquitoes

Malaria is a serious global health burden, affecting more than 200 million people each year in over 90 countries, predominantly in Africa, Asia and the Americas. Since the year 2000, a concerted effort to combat malaria has reduced its incidence by more than 40%, primarily due to the use of insecticide-treated bednets, indoor residual spraying and artemisinin-based combination drug therapies. Nevertheless, the cost of control is expected to nearly triple over the next decade and the current downward trend in disease transmission is threatened by the rise of resistance to drugs and insecticides. Novel strategies that are sustainable and cost-effective are needed to help usher in an era of malaria elimination. The most effective strategies thus far have focussed on control of the mosquito vector. The sterile insect technique (SIT) is a potentially powerful strategy that aims to suppress mosquito populations through the unproductive mating of wild female mosquitoes with sterile males that are released en masse. The technique and its derivatives are currently not appropriate for malaria control because it is difficult to sterilise males without compromising their ability to mate, and because anopheline males cannot be easily separated from females, which if released, could contribute to disease transmission. Advances in genome sequencing technologies and the development of transgenic techniques provide the tools necessary to produce mosquito sexing strains, which promise to improve current malaria-control programs and pave the way for new ones. In this review, the progress made in the development of transgenic sexing strains for the control of Anopheles gambiae, a major vector of human malaria, is discussed.

Molecular tools to create new strains for mosquito sexing and vector control

Vector control programs based on population reduction by matings with mass-released sterile insects require the release of only male mosquitoes, as the release of females, even if sterile, would increase the number of biting and potentially disease-transmitting individuals. While small-scale releases demonstrated the applicability of sterile males releases to control the yellow fever mosquito Aedes aegypti, large-scale programs for mosquitoes are currently prevented by the lack of efficient sexing systems in any of the vector species.Different approaches of sexing are pursued, including classical genetic and mechanical methods of sex separation. Another strategy is the development of transgenic sexing systems. Such systems already exist in other insect pests. Genome modification tools could be used to apply similar strategies to mosquitoes. Three major tools to modify mosquito genomes are currently used: transposable elements, site-specific recombination systems, and genome editing via TALEN or CRISPR/Cas. All three can serve the purpose of developing sexing systems and vector control strains in mosquitoes in two ways: first, via their use in basic research. A better understanding of mosquito biology, including the sex-determining pathways and the involved genes can greatly facilitate the development of sexing strains. Moreover, basic research can help to identify other regulatory elements and genes potentially useful for the construction of transgenic sexing systems. Second, these genome modification tools can be used to apply the gained knowledge to build and test mosquito sexing strains for vector control.

Opening the toolkit for genetic analysis and control of Anopheles mosquito vectors

Anopheles is the only genus of mosquitoes that transmit human malaria and consequently the focus of large scale genome and transcriptome-wide association studies. Genetic tools to define the function of the candidate genes arising from these analyses are vital. Moreover, genome editing offers the potential to modify Anopheles population structure at local and global scale to provide complementary tools towards the ultimate goal of malaria elimination. Major breakthroughs in Anopheles genetic analysis came with the development of germline transformation and RNA interference technology. Yet, the field has been revolutionised again by precise genome editing now possible through site-specific nucleases. Here we review the components of the current genetic toolkit available to study Anopheles, focusing particularly on how these technical advances are used to gain insight into malaria transmission and the design of genetic methods to control Anopheles vectors.

Multi-tissue GAL4-mediated gene expression in all Anopheles gambiae life stages using an endogenous polyubiquitin promoter

The ability to manipulate the Anopheles gambiae genome and alter gene expression effectively and reproducibly is a prerequisite for functional genetic analysis and for the development of novel control strategies in this important disease vector. However, in vivo transgenic analysis in mosquitoes is limited by the lack of promoters active ubiquitously. To address this, we used the GAL4/UAS system to investigate the promoter of the An. gambiae Polyubiquitin-c (PUBc) gene and demonstrated its ability to drive expression in mosquito cell culture before incorporation into An. gambiae transgenic driver lines. To generate such lines, piggyBac-mediated insertion was used to identify genomic regions able to sustain widespread expression and to create φC31 docking lines at these permissive sites. Patterns of expression induced by PUBc-GAL4 drivers carrying single intergenic insertions were assessed by crossing with a novel responder UAS-mCD8:mCherry line that was created by φC31-mediated integration. Amongst the drivers created at single, unique chromosomal integration loci, two were isolated that induced differential expression levels in a similar multiple-tissue spatial pattern throughout the mosquito life cycle. This work expands the tools available for An. gambiae functional analysis by providing a novel promoter for investigating phenotypes resulting from widespread multi-tissue expression, as well as identifying and tagging genomic sites that sustain broad transcriptional activity.

Highly Efficient Site-Specific Mutagenesis in Malaria Mosquitoes Using CRISPR

Anopheles mosquitoes transmit at least 200 million annual malaria infections worldwide. Despite considerable genomic resources, mechanistic understanding of biological processes in Anopheles has been hampered by a lack of tools for reverse genetics. Here, we report successful application of the CRISPR/Cas9 system for highly efficient, site-specific mutagenesis in the diverse malaria vectors Anopheles albimanus, A. coluzzii, and A. funestus. When guide RNAs (gRNAs) and Cas9 protein are injected at high concentration, germline mutations are common and usually biallelic, allowing for the rapid creation of stable mutant lines for reverse genetic analysis. Our protocol should enable researchers to dissect the molecular and cellular basis of anopheline traits critical to successful disease transmission, potentially exposing new targets for malaria control.

Modern Vector Control

The rapid spread of mosquito resistance to currently available insecticides, and the current lack of an efficacious malaria vaccine are among many challenges that affect large-scale efforts for malaria control. As goals of malaria elimination and eradication are put forth, new vector-control paradigms and tools and/or further optimization of current vector-control products are required to meet public health demands. Vector control remains the most effective measure to prevent malaria transmission and present gains against malaria mortality and morbidity may be maintained as long as vector-intervention strategies are sustained and adapted to underlying vector-related transmission dynamics. The following provides a brief overview of vector-control strategies and tools either in use or under development and evaluation that are intended to exploit key entomological parameters toward driving down transmission.

Gene Drive for Mosquito Control: Where Did It Come from and Where Are We Headed?

Mosquito-borne pathogens place an enormous burden on human health. The existing toolkit is insufficient to support ongoing vector-control efforts towards meeting disease elimination and eradication goals. The perspective that genetic approaches can potentially add a significant set of tools toward mosquito control is not new, but the recent improvements in site-specific gene editing with CRISPR/Cas9 systems have enhanced our ability to both study mosquito biology using reverse genetics and produce genetics-based tools. Cas9-mediated gene-editing is an efficient and adaptable platform for gene drive strategies, which have advantages over innundative release strategies for introgressing desirable suppression and pathogen-blocking genotypes into wild mosquito populations; until recently, an effective gene drive has been largely out of reach. Many considerations will inform the effective use of new genetic tools, including gene drives. Here we review the lengthy history of genetic advances in mosquito biology and discuss both the impact of efficient site-specific gene editing on vector biology and the resulting potential to deploy new genetic tools for the abatement of mosquito-borne disease.

Use of electroporation as an option to transform the horn fly, Haematobia irritans: a species recalcitrant to microinjection

The horn fly, Haematobia irritans, is a serious pest of cattle in North America. The control of horn flies has primarily relied on insecticides. However, the heavy use of insecticides has led to the development of insecticide resistance in horn flies. Novel methods to control horn flies are greatly needed. Transgenic technology is an effective tool to genetically modify insects and may lead to novel methods of pest control based on genomic approaches. Here we report a piggyBac-mediated transformation of the horn fly via electroporation. Transformation with a DsRed fluorescent marker protein coding region was verified by PCR analysis of individual fly bodies and pupal cases and sequencing of PCR products. However, Southern blot analysis failed to indicate the DsRed gene was integrated into the horn fly genome. Thus, the electroporation protocol may have caused the DsRed gene to be integrated into bacterial symbionts of the horn fly.

Insect transformation with piggyBac: getting the number of injections just right

The insertion of exogenous genetic cargo into insects using transposable elements is a powerful research tool with potential applications in meeting food security and public health challenges facing humanity. piggyBac is the transposable element most commonly utilized for insect germline transformation. The described efficiency of this process is variable in the published literature, and a comprehensive review of transformation efficiency in insects is lacking. This study compared and contrasted all available published data with a comprehensive data set provided by a biotechnology group specializing in insect transformation. Based on analysis of these data, with particular focus on the more complete observational data from the biotechnology group, we designed a decision tool to aid researchers' decision-making when using piggyBac to transform insects by microinjection. A combination of statistical techniques was used to define appropriate summary statistics of piggyBac transformation efficiency by species and insect order. Publication bias was assessed by comparing the data sets. The bias was assessed using strategies co-opted from the medical literature. The work culminated in building the Goldilocks decision tool, a Markov-Chain Monte-Carlo simulation operated via a graphical interface and providing guidance on best practice for those seeking to transform insects using piggyBac.

piggyBac Transposon

The piggyBac transposon was originally isolated from the cabbage looper moth, Trichoplusia ni, in the 1980s. Despite its early discovery and dissimilarity to the other DNA transposon families, the piggyBac transposon was not recognized as a member of a large transposon superfamily for a long time. Initially, the piggyBac transposon was thought to be a rare transposon. This view, however, has now been completely revised as a number of fully sequenced genomes have revealed the presence of piggyBac-like repetitive elements. The isolation of active copies of the piggyBac-like elements from several distinct species further supported this revision. This includes the first isolation of an active mammalian DNA transposon identified in the bat genome. To date, the piggyBac transposon has been deeply characterized and it represents a number of unique characteristics. In general, all members of the piggyBac superfamily use TTAA as their integration target sites. In addition, the piggyBac transposon shows precise excision, i.e., restoring the sequence to its preintegration state, and can transpose in a variety of organisms such as yeasts, malaria parasites, insects, mammals, and even in plants. Biochemical analysis of the chemical steps of transposition revealed that piggyBac does not require DNA synthesis during the actual transposition event. The broad host range has attracted researchers from many different fields, and the piggyBac transposon is currently the most widely used transposon system for genetic manipulations.

Genetic technologies for disease vectors

The first genetic technologies for insect vectors of disease were introduced 20 years ago. As of today there are 12 classes of genetic technologies used as functional genomic tools for insect vectors of important diseases. Although the applications of genetic technologies in insect disease vectors have been conducted primarily in mosquitoes, other insect systems could benefit from current technologies. While the various technological platforms are likely to function in diverse arthropods, the delivery of these technologies to cells and tissues of interest is the major technical constraint that limits their widespread adoption. Increased community resources of various types would enhance the adoption of these technologies and potentially eliminate technical limitations.

piggyBac: A vehicle for integrative DNA transformation of parasitic nematodes

In addition to their natural role in eukaryotic genome evolution, transposons can be powerful tools for functional genomics in diverse taxa. The piggyBac transposon has been applied as such in eukaryotic parasites, both protozoa and helminths, and in several important vector mosquitoes. piggyBac is advantageous for functional genomics because of its ability to transduce a wide range of taxa, its capacity to integrate large DNA ‘cargoes’ relative to other mobile genetic elements, its propensity to target transcriptional units and its ability to re-mobilize without leaving a pattern of non-excised sequences or ‘footprint’ in the genome. We recently demonstrated that piggyBac can integrate transgenes into the genome of the parasitic nematode Strongyloides ratti, an important model for parasitic nematode biology and a close relative of the significant human pathogen S. stercoralis. Unlike transgenes encoded in conventional plasmid vectors, which we assume are assembled into multi-copy episomal arrays as they are in Caenorhabditis elegans, transgenes integrated via piggyBac are not only stably inherited in S. ratti, they are also continuously expressed. This has allowed derivation of the first stable transgene expressing lines in any parasitic nematode, a significant advance in the development of functional genomic tools for these important pathogens.

Efficient ΦC31 integrase-mediated site-specific germline transformation of Anopheles gambiae

Current transgenic methodology developed for mosquitoes has not been applied widely to the major malaria vector Anopheles gambiae, which has proved more difficult to genetically manipulate than other mosquito species and dipteran insects. In this protocol, we describe ΦC31-mediated site-specific integration of transgenes into the genome of A. gambiae. The ΦC31 system has many advantages over 'classical' transposon-mediated germline transformation systems, because it allows integration of large transgenes at specific, characterized genomic locations. Starting from a general protocol, we have optimized steps from embryo collection to co-injection of transgene-containing plasmid and in vitro-produced ΦC31 integrase mRNA. We also provide tips for screening transgenic larvae. The outlined procedure provides robust transformation in A. gambiae, resulting in homozygous transgenic lines in ∼2-3 months.

IPB7 transposase behavior in Drosophila melanogaster and Aedes aegypti

Transposons are used in insect science as genetic tools that enable the transformation of insects and the identification and isolation of genes though their ability to insert in or near to them. Four transposons, piggyBac, Mos1, Hermes and Minos are commonly used in insects beyond Drosophila melanogaster with piggyBac, due to its wide host range and frequency of transposition, being the most commonly chosen. The utility of these transposons as genetic tools is directly proportional to their activity since higher transposition rates would be expected to lead to higher transformation frequencies and higher frequencies of insertion throughout the genome. As a consequence there is an ongoing need for hyperactive transposases for use in insect genetics, however these have proven difficult to obtain. IPB7 is a hyperactive mutant of the piggyBac transposase that was identified by a genetic screen performed in yeast, a mammalian codon optimized version of which was then found to be highly active in rodent embryonic stem cells with no apparent deleterious effects. Here we report the activity of IPB7 in D. melanogaster and the mosquito, Aedes aegypti. Somatic transposition assays revealed an increase in IPB7's transposition rate from wild-type piggyBac transposase in D. melanogaster but not Ae. aegypti. However the use of IPB7 in D. melanogaster genetic transformations produced a high rate of sterility and a low transformation rate compared to wild-type transposase. This high rate of sterility was accompanied by significant gonadal atrophy that was also observed in the absence of the piggyBac vector transposon. We conclude that IPB7 has increased activity in the D. melanogaster germ-line but that a component of the sterility associated with its activity is independent of the presence of the piggyBac transposon.

Exogenous gypsy insulator sequences modulate transgene expression in the malaria vector mosquito, Anopheles stephensi

Malaria parasites are transmitted to humans by mosquitoes of the genus Anopheles, and these insects are the targets of innovative vector control programs. Proposed approaches include the use of genetic strategies based on transgenic mosquitoes to suppress or modify vector populations. Although substantial advances have been made in engineering resistant mosquito strains, limited efforts have been made in refining mosquito transgene expression, in particular attenuating the effects of insertions sites, which can result in variations in phenotypes and impacts on fitness due to the random integration of transposon constructs. A promising strategy to mitigate position effects is the identification of insulator or boundary DNA elements that could be used to isolate transgenes from the effects of their genomic environment. We applied quantitative approaches that show that exogenous insulator-like DNA derived from the Drosophila melanogaster gypsy retrotransposon can increase and stabilize transgene expression in transposon-mediated random insertions and recombinase-catalyzed, site-specific integrations in the malaria vector mosquito, Anopheles stephensi. These sequences can contribute to precise expression of transgenes in mosquitoes engineered for both basic and applied goals.

Next-generation site-directed transgenesis in the malaria vector mosquito Anopheles gambiae: self-docking strains expressing germline-specific phiC31 integrase

Diseases transmitted by mosquitoes have a devastating impact on global health and the situation is complicated due to difficulties with both existing control measures and the impact of climate change. Genetically modified mosquitoes that are refractory to disease transmission are seen as having great potential in the delivery of novel control strategies. The Streptomyces phage phiC31 integrase system has been successfully adapted for site-directed transgene integration in a range of insects, thus overcoming many limitations due to size constraints and random integration associated with transposon-mediated transformation. Using this technology, we previously published the first site-directed transformation of Anopheles gambiae, the principal vector of human malaria. Mosquitoes were initially engineered to incorporate the phiC31 docking site at a defined genomic location. A second phase of genetic modification then achieved site-directed integration of an anti-malarial effector gene. In the current publication we report improved efficiency and utility of the phiC31 integrase system following the generation of Anopheles gambiae self-docking strains. Four independent strains, with docking sites at known locations on three different chromosome arms, were engineered to express integrase under control of the regulatory regions of the nanos gene from Anopheles gambiae. The resulting protein accumulates in the posterior oocyte to provide integrase activity at the site of germline development. Two self-docking strains, exhibiting significantly different levels of integrase expression, were assessed for site-directed transgene integration and found to demonstrate greatly improved survival and efficiency of transformation. In the fight against malaria, it is imperative to establish a broad repertoire of both anti-malarial effector genes and tissue-specific promoters to regulate their expression, enabling those offering maximum effect with minimum fitness cost to be identified. The improved technology we describe here will facilitate comparative studies of effector transgenes, allowing informed choices to be made that potentially lead to transmission blockade.

Transposable elements as tools for reshaping the genome: it is a huge world after all!

Transposable elements (TEs) are discrete pieces of DNA that can move from one site to another within genomes and sometime between genomes. They are found in all major branches of life. Because of their wide distribution and considerable diversity, they are a considerable source of genomic variation and as such, they constitute powerful drivers of genome evolution. Moreover, it is becoming clear that the epigenetic regulation of certain genes is derived from defense mechanisms against the activity of ancestral transposable elements. TEs now tend to be viewed as natural molecular tools that can reshape the genome, which challenges the idea that TEs are natural tools used to answer biological questions. In the first part of this chapter, we review the classification and distribution of TEs, and look at how they have contributed to the structural and transcriptional reshaping of genomes. In the second part, we describe methodological innovations that have modified their contribution as molecular tools.

Mosquito transgenic technologies to reduce Plasmodium transmission

The ability to introduce genetic constructs of choice into the genome of Anopheles mosquitoes provides a valuable tool to study the molecular interactions between the Plasmodium parasite and its insect host. In the long term, this technology could potentially offer new ways to control vector-borne diseases through the suppression of target mosquito populations or through the introgression of traits that preclude pathogen transmission. Here, we describe in detail protocols for the generation of transgenic Anopheles gambiae mosquitoes based on germ-line transformation using either modified transposable elements or the site-specific PhiC31 recombinase.

Low- and high-tech approaches to control Plasmodium parasite transmission by anopheles mosquitoes

Current efforts have proven inadequate to stop the transmission of Plasmodium parasites, and hence the spread of malaria, by Anopheles mosquitoes. Therefore, a novel arsenal of strategies for inhibiting Plasmodium infection of mosquitoes is urgently needed. In this paper, we summarize research on two approaches to malaria control, a low-tech strategy based on parasite inhibition by the mosquito's natural microflora, and a high-tech strategy using genetic modification of mosquitoes that renders them resistant to infection and discuss advantages and disadvantages for both approaches.

Size matters: versatile use of PiggyBac transposons as a genetic manipulation tool

Transposons have been promising elements for gene integration, and the Sleeping Beauty (SB) system has been the major one for many years, although there have been several other transposon systems available, for example, Tol2. However, recently another system known as PiggyBac (PB) has been introduced and developed for fulfilling the same purposes, for example, mutagenesis, transgenesis and gene therapy and in some cases with improved transposition efficiency and advantages over the Sleeping Beauty transposon system, although improved hyperactive transposase has highly increased the transposition efficacy for SB. The PB systems have been used in many different scientific research fields; therefore, the purpose of this review is to describe some of these versatile uses of the PiggyBac system to give readers an overview on the usage of PiggyBac system.

Developing transgenic Anopheles mosquitoes for the sterile insect technique

In the last 10 years the availability of the genome sequence of Anopheles gambiae and the development of a transgenic technology for several species of Anopheles mosquitoes have, in combination, helped in enabling us to gain several insights into the biology of these mosquitoes that is relevant to their capacity as vectors of the malaria parasite. While this information is anticipated to inform many novel vector control strategies, the technique most likely to benefit in the near future from the availability of a reliable transgenic technology is the sterile insect technique (SIT), which relies on releasing large numbers of sterile insects to compete for mates in the wild, leading to population suppression. Although SIT has been proven to work reliably for many insects, the construction of suitable strains, and induction of sterility, has until now been a laborious process, combining classical genetics with radiation-induced sterility. Using transgenesis to create strains of Anopheles suitable for SIT could potentially offer several advantages over current approaches, in that the basic design of transgenic constructs designed for other insects should be rapidly transferable to mosquitoes, and induction of sterility as a product of the transgenic modification could obviate the requirement for radiation and its associated deleterious effects. In this paper the progress of different transgenic approaches in constructing tools for SIT will be reviewed.

Safe and fit genetically modified insects for pest control: from lab to field applications

Insect transgenesis is continuously being improved to increase the efficacy of population suppression and replacement strategies directed to the control of insect species of economic and sanitary interest. An essential prerequisite for the success of both pest control applications is that the fitness of the transformant individuals is not impaired, so that, once released in the field, they can efficiently compete with or even out-compete their wild-type counterparts for matings in order to reduce the population size, or to spread desirable genes into the target population. Recent research has shown that the production of fit and competitive transformants can now be achieved and that transgenes may not necessarily confer a fitness cost. In this article we review the most recent published results of the fitness assessment of different transgenic insect lines and underline the necessity to fulfill key requirements of ecological safety. Fitness evaluation studies performed in field cages and medium/large-scale rearing will validate the present encouraging laboratory results, giving an indication of the performance of the transgenic insect genotype after release in pest control programmes.

Validation of novel promoter sequences derived from two endogenous ubiquitin genes in transgenic Aedes aegypti

To date, only a limited number of promoter sequences have been described to drive transgene expression in the disease vector Aedes aegypti. We sought to increase this repertoire by characterizing the ability of upstream sequences derived from the Ae. aegypti Ub(L40) and polyubiquitin genes to drive the expression of marker proteins. Both genomic fragments were able to drive robust expression of luciferase in cultured mosquito cells. Following Mos1-transformation, the Ub(L40) promoter drove strong expression of a fluorescent marker in early larvae and in ovaries, while the polyubiquitin promoter drove robust EGFP expression in all stages of development, including constitutive expression throughout the midgut. These promoter fragments provide two new expression profiles for future Ae. aegypti genetic experiments.

Transgenic technologies to induce sterility

The last few years have witnessed a considerable expansion in the number of tools available to perform molecular and genetic studies on the genome of Anopheles mosquitoes, the vectors of human malaria. As a consequence, knowledge of aspects of the biology of mosquitoes, such as immunity, reproduction and behaviour, that are relevant to their ability to transmit disease is rapidly increasing, and could be translated into concrete benefits for malaria control strategies. Amongst the most important scientific advances, the development of transgenic technologies for Anopheles mosquitoes provides a crucial opportunity to improve current vector control measures or design novel ones. In particular, the use of genetic modification of the mosquito genome could provide for a more effective deployment of the sterile insect technique (SIT) against vector populations in the field. Currently, SIT relies on the release of radiation sterilized males, which compete with wild males for mating with wild females. The induction of sterility in males through the genetic manipulation of the mosquito genome, already achieved in a number of other insect species, could eliminate the need for radiation and increase the efficiency of SIT-based strategies. This paper provides an overview of the mechanisms already in use for inducing sterility by transgenesis in Drosophila and other insects, and speculates on possible ways to apply similar approaches to Anopheles mosquitoes.

Molecular analysis of a mutant Anticarsia gemmatalis multiple nucleopolyhedrovirus (AgMNPV) shows an interruption of an inhibitor of apoptosis gene (iap-3) by a new class-II piggyBac-related insect transposon

A new piggyBac-related transposable element (TE) was found in the genome of a mutant Anticarsia gemmatalis multiple nucleopolyhedrovirus interrupting an inhibitor of apoptosis gene. This mutant virus induces apoptosis upon infection of an Anticarsia gemmatalis cell line, but not in a Trichoplusia ni cell line. The sequence of the new TE (which was named IDT for iap disruptor transposon) has 2531 bp with two DNA sequences flanking a putative Transposase (Tpase) ORF of 1719 bp coding for a protein with 572 amino acids. These structural features are similar to the piggyBac TE, also reported for the first time in the genome of a baculovirus. We have also isolated variants of this new TE from different lepidopteran insect cells and compared their Tpase sequences.

Transgenesis and paratransgenesis to control insect-borne diseases: current status and future challenges

Insect-borne diseases cause significant human morbidity and mortality. Current control and preventive methods against vector-borne diseases rely mainly on insecticides. The emergence of insecticide resistance in many disease vectors highlights the necessity to develop new strategies to control these insects. Vector transgenesis and paratransgenesis are novel strategies that aim at reducing insect vectorial capacity, or seek to eliminate transmission of pathogens such as Plasmodium sp., Trypanosoma sp., and Dengue virus currently being developed. Vector transgenesis relies on direct genetic manipulation of disease vectors making them incapable of functioning as vectors of a given pathogen. Paratransgenesis focuses on utilizing genetically modified insect symbionts to express molecules within the vector that are deleterious to pathogens they transmit. Despite the many successes achieved in developing such techniques in the last several years, many significant barriers remain and need to be overcome prior to any of these approaches become a reality. Here, we highlight the current status of these strategies, pointing out advantages and constraints, and also explore issues that need to be resolved before the establishment of transgenesis and paratransgenesis as tools to prevent vector-borne diseases.

The vasa regulatory region mediates germline expression and maternal transmission of proteins in the malaria mosquito Anopheles gambiae: a versatile tool for genetic control strategies

BACKGROUND

Germline specific promoters are an essential component of potential vector control strategies which function by genetic drive, however suitable promoters are not currently available for the main human malaria vector Anopheles gambiae.

RESULTS

We have identified the Anopheles gambiae vasa-like gene and found its expression to be specifically localized to both the male and female gonads in adult mosquitoes. We have functionally characterised using transgenic reporter lines the regulatory regions required for driving transgene expression in a pattern mirroring that of the endogenous vasa locus. Two reporter constructs indicate the existence of distinct vasa regulatory elements within the 5' untranslated regions responsible not only for the spatial and temporal but also for the sex specific germline expression. vasa driven eGFP expression in the ovary of heterozygous mosquitoes resulted in the progressive accumulation of maternal protein and transcript in developing oocytes that were then detectable in all embryos and neonatal larvae.

CONCLUSION

We have characterized the vasa regulatory regions that are not only suited to drive transgenes in the early germline of both sexes but could also be utilized to manipulate the zygotic genome of developing embryos via maternal deposition of active molecules. We have used computational models to show that a homing endonuclease-based gene drive system can function in the presence of maternal deposition and describe a novel non-invasive control strategy based on early vasa driven homing endonuclease expression.

The NemaGENETAG initiative: large scale transposon insertion gene-tagging in Caenorhabditis elegans

The nematode Caenorhabditis elegans is a widely appreciated, powerful platform in which to study important biological mechanisms related to human health. More than 65% of human disease genes have homologues in the C. elegans genome, and essential aspects of mammalian cell biology, neurobiology and development are faithfully recapitulated in this organism. The EU-funded NemaGENETAG project was initiated with the aim to develop cutting-edge tools and resources that will facilitate modelling of human pathologies in C. elegans, and advance our understanding of animal development and physiology. The main objective of the project involves the generation and evaluation of a large collection of transposon-tagged mutants. In the process of achieving this objective the NemaGENETAG consortium also endeavours to optimize and automate existing transposon-mediated mutagenesis methodologies based on the Mos1 transposable element, in addition to developing alternatives using other transposon systems. The final product of this initiative-a comprehensive collection of transposon-tagged alleles-together with the acquisition of efficient transposon-based tools for mutagenesis and transgenesis in C. elegans, should yield a wealth of information on gene function, immediately relevant to key biological processes and to pharmaceutical research and development.

Mutational analysis of highly conserved aspartate residues essential to the catalytic core of the piggyBac transposase

Background

The piggyBac mobile element is quickly gaining popularity as a tool for the transgenesis of many eukaryotic organisms. By studying the transposase which catalyzes the movement of piggyBac, we may be able to modify this vector system to make it a more effective transgenesis tool. In a previous publication, Sarkar A, Sim C, Hong YS, Hogan JR, Fraser MJ, Robertson HM, and Collins FH have proposed the presence of the widespread 'DDE/DDD' motif for piggyBac at amino acid positions D268, D346, and D447.

Results

This study utilizes directed mutagenesis and plasmid-based mobility assays to assess the importance of these residues as the catalytic core of the piggyBac transposase. We have functionally analyzed individual point-mutations with respect to charge and physical size in all three proposed residues of the 'DDD' motif as well as another nearby, highly conserved aspartate at D450. All of our mutations had a significant effect on excision frequency in S2 cell cultures. We have also aligned the piggyBac transposase to other close family members, both functional and non-functional, in an attempt to identify the most highly conserved regions and position a number of interesting features.

Conclusion

We found all the designated DDD aspartates reside in clusters of amino acids that conserved among piggyBac family transposase members. Our results indicate that all four aspartates are necessary, to one degree or another, for excision to occur in a cellular environment, but D450 seems to have a tolerance for a glutamate substitution. All mutants tested significantly decreased excision frequency in cell cultures when compared with the wild-type transposase.

Analysis of the piggyBac transposase reveals a functional nuclear targeting signal in the 94 c-terminal residues

Background

The piggyBac transposable element is a popular tool for germ-line transgenesis of eukaryotes. Despite this, little is known about the mechanism of transposition or the transposase (TPase) itself. A thorough understanding of just how piggyBac works may lead to more effective use of this important mobile element. A PSORTII analysis of the TPase amino acid sequence predicts a bipartite nuclear localization signal (NLS) near the c-terminus, just upstream of a putative ZnF (ZnF).

Results

We fused the piggyBac TPase upstream of and in-frame with the enhanced yellow fluorescent protein (EYFP) in the Drosophila melanogaster inducible metallothionein protein. Using Drosophila Schneider 2 (S2) cells and the deep red fluorescent nuclear stain Draq5, we were able to track the pattern of piggyBac localization with a scanning confocal microscope 48 hours after induction with copper sulphate.

Conclusion

Through n and c-terminal truncations, targeted internal deletions, and specific amino acid mutations of the piggyBac TPase open reading frame, we found that not only is the PSORTII-predicted NLS required for the TPase to enter the nucleus of S2 cells, but there are additional requirements for negatively charged amino acids a short length upstream of this region for nuclear localization.

From population structure to genetically-engineered vectors: New ways to control vector-borne diseases?

Epidemiological studies on vectors and the pathogens they can carry (such as Borrelia burgdorferi) are showing some correlations between infection rates and biodiversity highlighting the "dilution" effects on potential vectors. Meanwhile other studies comparing sympatric small rodent species demonstrated that rodent species transmitting more pathogens are parasitized by more ectoparasite species. Studies on population structure and size have also proven a difference on the intensity of the parasitic infection. Furthermore, preliminary results in genetic improvement in mosquitoes (genetic markers, sexing, and genetic sterilization) will also increase performance as it has already been shown in field applications in developing countries. Recent results have greatly improved the fitness of genetically-modified insects compared to wild type populations with new approaches such as the post-integration elimination of transposon sequences, stabilising any insertion in genetically-modified insects. Encouraging results using the Sterile Insect Technique highlighted some metabolism manipulation to avoid the viability of offspring from released parent insect in the wild. Recent studies on vector symbionts would also bring a new angle in vector control capabilities, while complete DNA sequencing of some arthropods could point out ways to block the deadly impact on animal and human populations. These new potential approaches will improve the levels of control or even in some cases would eradicate vector species and consequently the vector-borne diseases they can transmit. In this paper we review some of the population biology theories, biological control methods, and the genetic techniques that have been published in the last years that are recommended to control for vector-borne diseases.

Expression of a mutated phospholipase A2 in transgenic Aedes fluviatilis mosquitoes impacts Plasmodium gallinaceum development

The genetic manipulation of mosquito vectors is an alternative strategy in the fight against malaria. It was previously shown that bee venom phospholipase A2 (PLA2) inhibits ookinete invasion of the mosquito midgut although mosquito fitness was reduced. To maintain the PLA2 blocking ability without compromising mosquito biology, we mutated the protein-coding sequence to inactivate the enzyme while maintaining the protein's structure. DNA encoding the mutated PLA2 (mPLA2) was placed downstream of a mosquito midgut-specific promoter (Anopheles gambiae peritrophin protein 1 promoter, AgPer1) and this construct used to transform Aedes fluviatilis mosquitoes. Four different transgenic lines were obtained and characterized and all lines significantly inhibited Plasmodium gallinaceum oocyst development (up to 68% fewer oocysts). No fitness cost was observed when this mosquito species expressed the mPLA2.

Perspectives in the control of infectious diseases by transgenic mosquitoes in the post-genomic era--a review

Arthropod-borne diseases caused by a variety of microorganisms such as dengue virus and malaria parasites afflict billions of people worldwide imposing major economic and social burdens. Despite many efforts, vaccines against diseases transmitted by mosquitoes, with the exception of yellow fever, are not available. Control of such infectious pathogens is mainly performed by vector management and treatment of affected individuals with drugs. However, the numbers of insecticide-resistant insects and drug-resistant parasites are increasing. Therefore, inspired in recent years by a lot of new data produced by genomics and post-genomics research, several scientific groups have been working on different strategies to control infectious arthropod-borne diseases. This review focuses on recent advances and perspectives towards construction of transgenic mosquitoes refractory to malaria parasites and dengue virus transmission.

Genomic resources for invertebrate vectors of human pathogens, and the role of VectorBase

High-throughput genome sequencing techniques have now reached vector biology with an emphasis on those species that are vectors of human pathogens. The first mosquito to be sequenced was Anopheles gambiae, the vector for Plasmodium parasites that cause malaria. Further mosquitoes have followed: Aedes aegypti (yellow fever and dengue fever vector) and Culex pipiens (lymphatic filariasis and West Nile fever). Species that are currently in sequencing include the body louse Pediculus humanus (Typhus vector), the triatomine Rhodnius prolixus (Chagas disease vector) and the tick Ixodes scapularis (Lyme disease vector). The motivations for sequencing vector genomes are to further understand vector biology, with an eye on developing new control strategies (for example novel chemical attractants or repellents) or understanding the limitations of current strategies (for example the mechanism of insecticide resistance); to analyse the mechanisms driving their evolution; and to perform an exhaustive analysis of the gene repertory. The proliferation of genomic data creates the need for efficient and accessible storage. We present VectorBase, a genomic resource centre that is both involved in the annotation of vector genomes and act as a portal for access to the genomic information (http://www.vectorbase.org).

Gene expression studies in mosquitoes

Research on gene expression in mosquitoes is motivated by both basic and applied interests. Studies of genes involved in hematophagy, reproduction, olfaction, and immune responses reveal an exquisite confluence of biological adaptations that result in these highly-successful life forms. The requirement of female mosquitoes for a bloodmeal for propagation has been exploited by a wide diversity of viral, protozoan and metazoan pathogens as part of their life cycles. Identifying genes involved in host-seeking, blood feeding and digestion, reproduction, insecticide resistance and susceptibility/refractoriness to pathogen development is expected to provide the bases for the development of novel methods to control mosquito-borne diseases. Advances in mosquito transgenesis technologies, the availability of whole genome sequence information, mass sequencing and analyses of transcriptomes and RNAi techniques will assist development of these tools as well as deepen the understanding of the underlying genetic components for biological phenomena characteristic of these insect species.

Evolution and horizontal transfer of a DD37E DNA transposon in mosquitoes

ITmD37E, a unique class II transposable element (TE) with an ancient origin, appears to have been involved in multiple horizontal transfers in mosquitoes as ITmD37E sequences from 10 mosquito species of five genera share high nucleotide (nt) identities. For example, ITmD37E sequences from Aedes aegypti and Anopheles gambiae, which have an estimated common ancestor of 145-200 million years ago, display 92% nt identity. The comparison of ITmD37E and host mosquito phylogenies shows a lack of congruence. The wide distribution of conserved ITmD37Es in mosquitoes and the presence of intact copies suggest that this element may have been recently active.

Post-integration stability of piggyBac in Aedes aegypti

The post-integration activity of piggyBac transposable element gene vectors in Aedes aegypti mosquitoes was tested under a variety of conditions. The embryos from five independent transgenic lines of Ae. aegypti, each with a single integrated non-autonomous piggyBac transposable element gene vector, were injected with plasmids containing the piggyBac transposase open-reading frame under the regulatory control of the Drosophila melanogaster hsp70 promoter. No evidence for somatic remobilization was detected in the subsequent adults whereas somatic remobilization was readily detected when similar lines of transgenic D. melanogaster were injected with the same piggyBac transposase-expressing plasmid. Ae. aegypti heterozygotes of piggyBac reporter-containing transgenes and piggyBac transposase-expressing transgenes showed no evidence of somatic and germ-line remobilization based on phenotypic and molecular detection methods. The post-integration mobility properties of piggyBac in Ae. aegypti enhance the utility of this gene vector for certain applications, particularly those where any level of vector remobilization is unacceptable.

Post-integration behavior of a Minos transposon in the malaria mosquito Anopheles stephensi

Transposable elements represent important tools to perform functional studies in insects. In Drosophila melanogaster, the remobilization properties of transposable elements have been utilized for enhancer-trapping and insertional mutagenesis experiments, which have considerably helped in the functional characterization of the fruitfly genome. In Anopheles mosquitoes, the sole vectors of human malaria, as well as in other mosquito vectors of disease, the use of transposons has also been advocated to achieve the spread of anti-parasitic genes throughout field populations. Here we report on the post-integration behavior of the Minos transposon in both the germ-line and somatic tissues of Anopheles mosquitoes. Transgenic An. stephensi lines developed using the piggyBac transposon and expressing the Minos transposase were tested for their ability to remobilize an X-linked Minos element. Germ-line remobilization events were not detected, while somatic excisions and transpositions were consistently recovered. The analysis of these events showed that Minos activity in Anopheles cells is characterized by unconventional functionality of the transposon. In the two cases analyzed, re-integration of the transposon occurred onto the same X chromosome, suggesting a tendency for local hopping of Minos in the mosquito genome. This is the first report of the post-integration behavior of a transposable element in a human malaria vector.

Malaria vector control in the third millennium: progress and perspectives of molecular approaches

Remarkable progress has been made towards a deeper understanding of mosquito biology since the completion of the Anopheles gambiae Giles genome project. Combined with the development of efficient transgenic technologies for genetic modification of major vector species and the availability of powerful molecular, genetic and bioinformatics tools, this is allowing the identification of genes involved in mosquito biological functions crucial to malaria transmission, ranging from host-seeking behaviour and innate immunity to insecticide resistance. Moreover, population genetic studies are beginning to elucidate the complex structure of vector populations. Finally, novel methods for malaria control are emerging that are based on the use of genetically modified mosquitoes either to interrupt the journey of the Plasmodium parasite within its insect host or to suppress those mosquito species that function as vectors for parasite transmission.

High efficiency germ-line transformation of mosquitoes

The ability to manipulate the mosquito genome through germ-line transformation provides us with a powerful tool for investigating gene structure and function. It is also a valuable method for the development of novel approaches to combating the spread of mosquito-vectored diseases. To date, germ-line transformation has been demonstrated in several mosquito species. Transgenes are introduced into pre-blastocyst mosquito embryos using microinjection techniques that take a few hours, and progeny are screened for the presence of a marker gene. The microinjection protocol presented here can be applied to most mosquitoes and contains several improvements over other published methods that increase the survival of injected embryos and, therefore, the number of transformants. Transgenic lines can be established in approximately 1 month using this technique.