The cold-active lipase of Pseudomonas fragi. Heterologous expression, biochemical characterization and molecular modeling

Multimodal analysis of south-eastern Black Sea sediment bacterial population diversity

This study focused on marine sediments from the Black Sea, mainly due to bacterial diversity-induced public health / biotechnology application value. Sediment samples were gathered from 14 locations at differing depths across Turkish shores on a seasonal basis over 10 months, with bacterial identifications performed through using multimodal analytical platforms. Overall, 26 differing, predominantly Gram-positive (57.5 %) bacterial species were identified for this region, including Bacillaceae (50.0 %) and Pseudomonadaceae (15.0 %). The most dominant classes were identified as Bacilli (52.5 %) and Gammaproteobacteria (40.0 %). Ten isolates (25 %) to the species level and thirty-six isolates (90 %) to the genus level were identified using VITEK® MS and Bruker Microflex® LT/SH, in comparison to 16S rRNA sequencing results. Identified species - particularly, novel reported species - can contribute to the knowledge of microbial life dwelling upon sediments of the south-eastern regions of the Black Sea.

Extremophilic lipases for industrial applications: A general review

With industrialization and development in modern science enzymes and their applications increased widely. There is always a hunt for new proficient enzymes with novel properties to meet specific needs of various industrial sectors. Along with the high efficiency, the green and eco-friendly side of enzymes attracts human attention, as they form a true answer to counter the hazardous and toxic conventional industrial catalyst. Lipases have always earned industrial attention due to the broad range of hydrolytic and synthetic reactions they catalyse. When these catalytic properties get accompanied by features like temperature stability, pH stability, and solvent stability lipases becomes an appropriate tool for use in many industrial processes. Extremophilic lipases offer the same, thermostable: hot and cold active thermophilic and psychrophilic lipases, acid and alkali resistant and active acidophilic and alkaliphilic lipases, and salt tolerant halophilic lipases form excellent biocatalyst for detergent formulations, biofuel synthesis, ester synthesis, food processing, pharmaceuticals, leather, and paper industry. An interesting application of these lipases is in the bioremediation of lipid waste in harsh environments. The review gives a brief account on various extremophilic lipases with emphasis on thermophilic, psychrophilic, halophilic, alkaliphilic, and acidophilic lipases, their sources, biochemical properties, and potential applications in recent decades.

Molecular characterization of lipase from a psychrotrophic bacterium Pseudomonas sp. CRBC14

Lipases from Pseudomonas species are particularly useful due to their broader biocatalytic applications and temperature activity. In this study, we amplified the gene encoding wild-type cold-active lipase from the genome of psychrotrophic bacterium isolated from the Himalayan glacier. The isolated CRBC14 strain was identified as Pseudomonas sp. based on the 16S rRNA gene sequence. Lipase activity was determined by observing the hydrolysis zone on nutrient agar containing tributyrin (1%, v/v). The sequence analysis of cold-active lipase revealed a protein of 611 amino acids with a calculated molecular mass of 63.71 kDa. The three-dimensional structure of this lipase was generated through template-supported modeling. Distinct techniques stamped the model quality, following which the binding free energies of tributyrin and oleic acid in the complex state with this enzymatic protein were predicted through molecular mechanics generalized born surface area (MMGBSA). A relative comparison of binding free energy values of these substrates indicated tributyrin's comparatively higher binding propensity towards the lipase. Using molecular docking, we evaluated the binding activity of cold-active lipase against tributyrin and oleic acid. Our docking analysis revealed that the lipase had a higher affinity for tributyrin than oleic acid, as evidenced by our measurement of the hydrolysis zone on two media plates. This study will help to understand the bacterial diversity of unexplored Himalayan glaciers and the possible application of their cold-adapted enzymes.

Production of extracellular lipase from psychrotrophic bacterium Oceanisphaera sp. RSAP17 isolated from arctic soil

Cold-active extracellular lipases produced by different psychrotrophs are important for various industrial applications. We have isolated a Gram-negative, rod-shaped, aerobe, non-pigment producing psychrotrophic bacterial strain RSAP17 (MTCC 12991, MCC 4275) from the unexplored Arctic soil sample of NyAlesund, Svalbard, Norway (78° 55″ N, 11° 54″ E). The detailed morphological, biochemical, and molecular characteristics were investigated to characterize the isolate RSAP17. Analyses of the 16S rDNA sequence of strain RSAP17 (Accession no. MK391379) shows the closest match with Oceanisphaera marina YM319^T (99.45%) and Oceanisphaera sediminis TW92 JCM 17329^T (97.40%). The isolate is capable of producing extracellular lipase but not amylase, cellulase or urease. The optimal parameters for lipase production have been found in tributyrin based (10 mL/L) agar media supplemented with 3% (w/v) NaCl after 2-3 days of incubation at 20-22 °C temperature and pH 9 at shaking condition. We have purified the extracellular lipase from the RSAP17 grown culture supernatant through 75% ammonium sulfate precipitation followed by dialysis and DEAE cellulose column chromatography. The invitro lipolytic activity of the purified lipase enzymes has been done through zymogram analysis. The molecular weight found for the lipase is 103.8 kD. The optimal activity of the purified lipase has been found at 25 °C and pH 9. MALDI-TOF-MS study of the purified lipase showed the highest match with the sequence of prolipoprotein diacylglyceryl transferase with 44% sequence coverage. Further study on large-scale production, substrate utilization and enzymatic kinetics of this lipase could unravel its possibility in future biotechnological applications.

Comparative Proteomics Reveals the Anaerobic Lifestyle of Meat-Spoiling Pseudomonas Species

The ability of certain Pseudomonas (P.) species to grow or persist in anoxic habitats by either denitrification, acetate fermentation, or arginine fermentation has been described in several studies as a special property. Previously, we had isolated strains belonging to the species P. lundensis, P. weihenstephanensis, and P. fragi from anoxic modified atmosphere packaged (MAP) minced beef and further proved their anaerobic growth in vitro on agar plates. This follow-up study investigated the anaerobic growth of two strains per respective species in situ on inoculated chicken breast filet under 100% N₂ modified atmosphere. We were able to prove anaerobic growth of all six strains on chicken breast filet with cell division rates of 0.2–0.8/day. Furthermore, we characterized the anaerobic metabolic lifestyle of these Pseudomonas strains by comparative proteomics, upon their cultivation in meat simulation media, which were constantly gassed with either air or 100% N₂ atmospheres. From these proteomic predictions, and respective complementation by physiological experiments, we conclude that the Pseudomonas strains P. fragi, P. weihenstephanensis, P. lundensis exhibit a similar anaerobic lifestyle and employ arginine fermentation via the arginine deiminase (ADI) pathway to grow anaerobically also on MAP meats. Furthermore, glucose fermentation to ethanol via the ED-pathway is predicted to enable long term survival but no true growth, while respiratory growth with nitrate as alternative electron acceptor or glucose fermentation to acetate could be excluded due to absence of essential genes. The citric acid cycle is partially bypassed by the glyoxylate shunt, functioning as the gluconeogenetic route without production of NADH₂ under carbon limiting conditions as e.g., in packaged meats. Triggered by an altered redox balance, we also detected upregulation of enzymes involved in protein folding as well as disulfide bonds isomerization under anoxic conditions as a counteracting mechanism to reduce protein misfolding. Hence, this study reveals the mechanisms enabling anaerobic grow and persistence of common meat-spoiling Pseudomonas species, and further complements the hitherto limited knowledge of the anaerobic lifestyle of Pseudomonas species in general.

Habitat Elevation Shapes Microbial Community Composition and Alter the Metabolic Functions in Wild Sable (Martes zibellina) Guts

In recent decades, wild sable (Carnivora Mustelidae Martes zibellina) habitats, which are often natural forests, have been squeezed by anthropogenic disturbances such as clear-cutting, tilling and grazing. Sables tend to live in sloped areas with relatively harsh conditions. Here, we determine effects of environmental factors on wild sable gut microbial communities between high and low altitude habitats using Illumina Miseq sequencing of bacterial 16S rRNA genes. Our results showed that despite wild sable gut microbial community diversity being resilient to many environmental factors, community composition was sensitive to altitude. Wild sable gut microbial communities were dominated by Firmicutes (relative abundance 38.23%), followed by Actinobacteria (30.29%), and Proteobacteria (28.15%). Altitude was negatively correlated with the abundance of Firmicutes, suggesting sable likely consume more vegetarian food in lower habitats where plant diversity, temperature and vegetation coverage were greater. In addition, our functional genes prediction and qPCR results demonstrated that energy/fat processing microorganisms and functional genes are enriched with increasing altitude, which likely enhanced metabolic functions and supported wild sables to survive in elevated habitats. Overall, our results improve the knowledge of the ecological impact of habitat change, providing insights into wild animal protection at the mountain area with hash climate conditions.

Gene cloning, heterologous expression, and partial characterization of a novel cold-adapted subfamily I.3 lipase from Pseudomonas fluorescence KE38

A novel cold-active true lipase from Pseudomonas sp. KE38 was cloned, sequencing and expressed in E. coli by degenerate PCR and genome walking technique. The open reading frame of the cloned gene encoded a polypeptide chain of 617 amino acids with a confirmed molecular weight of 64 kD. Phylogenetic analysis of the deduced amino acid sequence of the lipase indicated that it had high similarity with lipases of subfamily Ι.3 of bacterial lipases. Recombinant lipase was purified in denatured form as inclusion bodies, which were then renatured by urea followed by dialysis. Lipase activity was determined titrimetrically using olive oil as substrate. The enzyme showed optimal activity at 25 °C, pH 8.5 and was highly stable in the presence of various metal ions and organic solvents. Low optimal temperature and high activity in the presence of methanol and ethanol make this lipase a potential candidate for transesterification reactions and biodiesel production.

Co-expression of Pseudomonas alcaligenes lipase and its specific foldase in Pichia pastoris by a dual expression cassette strategy

Lipomax is a commercialized foldase-dependent Pseudomonas lipase that was previously expressed only in Pseudomonas strains. Here, using Pichia pastoris as the host, we report a new co-expression method that leads to the successful production of Lipomax. The active Lipomax is extracellularly co-expressed with its cognate foldase (LIM); and the purified enzyme mix has the optimum pH at pH 8.0 and an optimal temperature around 40 °C. N-glycosylation was observed for Pichia produced Lipomax, and its reduction was shown to increase the lipolytic activity. With different p-nitrophenyl esters as the substrates, the substrate profiling analyses further indicate that Lipomax prefers esters with middle-long chain fatty acids, showing the highest specific activity to p-nitrophenyl caprylate (C8). The extracellular co-expression of Lipomax and LIM in Pichia will not only increase our ability to investigate additional eukaryotic hosts for lipase expression, but also be of considerable value in analyzing other foldase-dependent lipases.

The co-existence of cold activity and thermal stability in an Antarctic GH42 β-galactosidase relies on its hexameric quaternary arrangement

To survive in cold environments, psychrophilic organisms produce enzymes endowed with high specific activity at low temperature. The structure of these enzymes is usually flexible and mostly thermolabile. In this work, we investigate the structural basis of cold adaptation of a GH42 β-galactosidase from the psychrophilic Marinomonas ef1. This enzyme couples cold activity with astonishing robustness for a psychrophilic protein, for it retains 23% of its highest activity at 5 °C and it is stable for several days at 37 °C and even 50 °C. Phylogenetic analyses indicate a close relationship with thermophilic β-galactosidases, suggesting that the present-day enzyme evolved from a thermostable scaffold modeled by environmental selective pressure. The crystallographic structure reveals the overall similarity with GH42 enzymes, along with a hexameric arrangement (dimer of trimers) not found in psychrophilic, mesophilic, and thermophilic homologues. In the quaternary structure, protomers form a large central cavity, whose accessibility to the substrate is promoted by the dynamic behavior of surface loops, even at low temperature. A peculiar cooperative behavior of the enzyme is likely related to the increase of the internal cavity permeability triggered by heating. Overall, our results highlight a novel strategy of enzyme cold adaptation, based on the oligomerization state of the enzyme, which effectively challenges the paradigm of cold activity coupled with intrinsic thermolability. DATABASE: Structural data are available in the Protein Data Bank database under the accession number 6Y2K.

Calcium-Induced Activity and Folding of a Repeat in Toxin Lipase from Antarctic Pseudomonas fluorescens Strain AMS8

It is hypothesized that the Ca²⁺ ions were involved in the activity, folding and stabilization of many protein structures. Many of these proteins contain repeat in toxin (RTX) motifs. AMS8 lipase from Antarctic Pseudomonas fluorescens strain AMS8 was found to have three RTX motifs. So, this research aimed to examine the influence of Ca²⁺ ion towards the activity and folding of AMS8 lipase through various biophysical characterizations. The results showed that CaCl₂ increased lipase activity. The far-UV circular dichroism (CD) and Fourier-transform infrared (FTIR) analysis suggested that the secondary structure content was improved with the addition of CaCl₂. Fluorescence spectroscopy analysis showed that the presence of CaCl₂ increased protein folding and compactness. Dynamic light scattering (DLS) analysis suggested that AMS8 lipase became aggregated at a high concentration of CaCl₂.The binding constant (K_d) value from the isothermal titration calorimetry (ITC) analysis proved that the Ca²⁺ ion was tightly bound to the AMS8 lipase. In conclusion, Ca²⁺ ions play crucial roles in the activity and folding of the AMS8 lipase. Calcium binding to RTX nonapeptide repeats sequences will induced the formation and folding of the RTX parallel β-roll motif repeat structure.

In Silico insights on enhancing thermostability and activity of a plant Fructosyltransferase from Pachysandra terminalis via introduction of disulfide bridges

Drawbacks of industrially-used fructosyltransferases (FTs) such as low optimum temperature and low fructooligosaccharides (FOS) yield necessitates the search for engineered FTs that are highly thermostable and active. With the availability of the first plant FT crystal structure from Pachysandra terminalis (PDB ID: 3UGH), computer-aided protein engineering of plant FT is now feasible. To obtain insights on the effect of specific mutations i.e. disulfide bridge introduction, wild-type and mutant FTs were subjected to a 15 μs Martini Coarse-grained Molecular Dynamics (CGMD) simulations at 303 K and 334 K. We report here the five mutants, M31C-Q49C, L144C-S193C, P34C-W300C, S219C-L226C and V470C-S498C with enhanced thermostabilities and/or activities relative to the wild type. Interestingly, M31C-Q49C, which is located within the catalytic-carrying blade of the catalytic domain, has an activity enhancement at both temperatures. At 334 K, three mutations, L144C-S193C, P34C-W300C and V470C-S498C, achieved thermostability relative to the wild type. Intriguingly, both activity and stability enhancement exhibited only at 334 K can be achieved provided that the mutation is located either on the catalytic-carrying residue blade of the catalytic domain or on the non-catalytic domain. Our results suggest that V470C-S498C and L144C-S193C are promising mutants and that domain-specific approach may be exploited to customize enzyme properties.

New Recombinant Cold-Adapted and Organic Solvent Tolerant Lipase from Psychrophilic Pseudomonas sp. LSK25, Isolated from Signy Island Antarctica

In recent years, studies on psychrophilic lipases have become an emerging area of research in the field of enzymology. The study described here focuses on the cold-adapted organic solvent tolerant lipase strain Pseudomonas sp. LSK25 isolated from Signy Station, South Orkney Islands, maritime Antarctic. Strain LSK25 lipase was successfully cloned, sequenced, and over-expressed in an Escherichia coli system. Sequence analysis revealed that the lipase gene of Pseudomonas sp. LSK25 consists of 1432 bp, lacks an N-terminal signal peptide and encodes a mature protein consisting of 476 amino acids. The recombinant LSK25 lipase was purified by single-step purification using Ni-Sepharose affinity chromatography and had a molecular mass of approximately 65 kDa. The final recovery and purification fold were 44% and 1.3, respectively. The LSK25 lipase was optimally active at 30 °C and at pH 6. Stable lipolytic activity was reported between temperatures of 5–30 °C and at pH 6–8. A significant enhancement of lipolytic activity was observed in the presence of Ca²⁺ ions, the organic lipids of rice bran oil and coconut oil, a synthetic C12 ester and a wide range of water immiscible organic solvents. Overall, lipase strain LSK25 is a potentially desirable candidate for biotechnological application, due to its stability at low temperatures, across a range of pH and in organic solvents.

Cloning, expression and characterization of cold active esterase (EstN7) from Bacillus cohnii strain N1: A novel member of family IV

Esterases and lipases from extremophiles have attracted great attention due to their unique characteristics and wide applications. In the present study, an open reading frame (ORF) encoding a novel cold active esterase (EstN7) from Bacillus cohnii strain N1 was cloned and expressed in Escherichia coli. The full-length esterase gene encoding a protein of 320 amino acids with estimated molecular weight of 37.0 kDa. Amino acid sequence analysis revealed that the EstN7 belongs to family IV lipases with a characteristic penta-peptide motif (GXSXG), the catalytic triad Ser, Asp, His and the conserved HGGG motif of the family IV. The recombinant enzyme was purified to apparent homogeneity using nickel-affinity chromatography with a purification fold of 5 and recovery 94.5%. The specific activity of the purified enzyme was 336.89 U/mg. The recombinant EstN7 showed optimal activity at 5 °C moreover, EstN7 displayed full robust stability in the presence of wide range of organic solvents. The purified enzyme had K_m and V_max of 45 ± 0.019 μM and 1113 μmol min^-1 mg^-1, respectively on p-NP-acetate. These promising characteristics of the recombinant EstN7 would underpin its possible usage with high potential in the synthesis of fragile compounds in pharmaceutical industries.

A novel cold-adapted esterase from Enterobacter cloacae: Characterization and improvement of its activity and thermostability via the site of Tyr193Cys

Background

In industries lipolytic reactions occur in insensitive conditions such as high temperature thus novel stout esterases with unique properties are attracts to the industrial application. Protein engineering is the tool to obtain desirable characters of enzymes. A novel esterase gene was isolated from South China Sea and subjected to a random mutagenesis and site directed mutagenesis for higher activity and thermo-stability compared to wild type.

Results

A novel esterase showed the highest hydrolytic activity against p-nitrophenyl acetate (pNPA, C2) and the optimal activity at 40 °C and pH 8.5. It was a cold-adapted enzyme and retained approximately 40% of its maximum activity at 0 °C. A mutant, with higher activity and thermo-stability was obtained by random mutagenesis. Kinetic analysis indicated that the mutant Val29Ala/Tyr193Cys shown 43.5% decrease in K_m, 2.6-fold increase in K_cat, and 4.7-fold increase in K_cat/K_m relative to the wild type. Single mutants V29A and Y193C were constructed and their kinetic parameters were measured. The results showed that the values of K_m, K_cat, and K_cat/K_m of V29A were similar to those of the wild type while Y193C showed 52.7% decrease in K_m, 2.7-fold increase in K_cat, and 5.6-fold increase in K_cat/K_m compared with the wild type. The 3-D structure and docking analysis revealed that the replacement of Tyr by Cys could enlarge the binding pocket. Moreover Y193C also showed a better thermo-stability for the reason its higher hydrophobicity and retained 67% relative activity after incubation for 3 h at 50 °C.

Conclusions

The superior quality of modified esterase suggested it has great potential application in extreme conditions and the mutational work recommended that important information for the study of esterase structure and function.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-0885-z) contains supplementary material, which is available to authorized users.

Pseudomonas sp. BUP6 produces a thermotolerant alkaline lipase with trans-esterification efficiency in producing biodiesel

The present study describes the characteristics of a thermotolerant and alkaline lipase secreted by Pseudomonas sp. BUP6, a novel rumen bacterium isolated from Malabari goat, and its trans-esterification efficiency in producing biodiesel from used cooking oil (UCO). The extracellular lipase was purified to homogeneity (35.8 times purified with 14.8% yield) employing (NH₄)₂SO₄ salt precipitation and Sephadex G-100 chromatography. The apparent molecular weight of this lipase on SDS-PAGE was 35 kDa, the identity of which was further confirmed by MALDI-TOF/MS. The purified lipase was found stable at a pH range of 7-9 with the maximum activity (707 U/ml) at pH 8.2; and was active at the temperature ranging from 35 to 50 °C with the optimum at 45 °C (891 U/ml). Triton X-100 and EDTA had no effect on the activity of lipase; whereas SDS, Tween-80 and β-mercaptoethanol inhibited its activity significantly. Moreover, Ca²⁺ (1.0 mM) enhanced the activity of lipase (1428 U/ml) by 206% vis-à-vis initial activity; while Zn²⁺, Fe²⁺ and Cu²⁺ decreased the activity significantly. Using para-nitrophenyl palmitate as substrate, the K_m (11.6 mM) and V_max [668.9 μmol/(min/mg)] of the purified lipase were also determined. Crude lipase was used for analyzing its trans-esterification efficiency with used cooking oil and methanol which resulted in the worthy yield of fatty acid methyl esters, FAME (45%) at 37 °C, indicating its prospects in biodiesel industry. Thus, the lipase secreted by the rumen bacterium, Pseudomonas sp. BUP6, offers great potentials to be used in various industries including the production of biodiesel by trans-esterification.

Controlled drug release through regulated biodegradation of poly(lactic acid) using inorganic salts

Biodegradation rate of poly(lactic acid) (PLA) has been regulated, both increase and decrease with respect to the biodegradation of pure PLA, by embedding meager amount of inorganic salts in polymer matrix. Biodegradation is performed in enzyme medium on suspension and film and the extent of biodegradation is measured through spectroscopic technique which is also verified by weight loss measurement. Media pH has been controlled using trace amount of inorganic salt which eventually control the biodegradation of PLA. High performance liquid chromatography confirms the hydrolytic degradation of PLA to its monomer/oligomer. Induced pH by metal salts show maximum degradation at alkaline range (with calcium salt) while inhibition is observed in acidic medium (with iron salt). The pH of media changes the conformation of enzyme which in turn regulate the rate of biodegradation. Thermal degradation and increment of modulus indicate improvement in thermo-mechanical properties of PLA in presence of inorganic salts. Functional stability of enzyme with metal salts corresponding to acidic and alkaline pH has been established through a model to explain the conformational changes of the active sites of enzyme at varying pH influencing the rate of hydrolysis leading to regulated biodegradation of PLA. The tuned biodegradation has been applied for the controlled release of drug from the polymer matrix (both sustained and enhanced cumulative release as compared to pure polymer). The cell proliferation and adhesion are influenced by the acidic and basic nature of polymeric material tuned by two different inorganic salts showing better adhesion and proliferation in calcium based composite and, therefore, suggest biological use of these composites in biomedical applications.

Prolonged Production and Aggregation Complexity of Cold-Active Lipase from Pseudomonas proteolytica (GBPI_Hb61) Isolated from Cold Desert Himalaya

Pseudomonas, being the common inhabitant of colder environments, are suitable for the production of cold-active enzymes. In the present study, a newly isolated strain of Pseudomonas from cold desert site in Indian Himalayan Region, was investigated for the production of cold-active lipase. The bacteria were identified as Pseudomonas proteolytica by 16S rDNA sequencing. Lipase production by bacteria was confirmed by qualitative assay using tributyrin and rhodamine-B agar plate method. The bacterium produced maximum lipase at 25 °C followed by production at 15 °C while utilizing olive, corn, as well as soybean oil as substrate in lipase production broth. Enzyme produced by bacteria was partially purified using ammonium sulphate fractionation. GBPI_Hb61 showed aggregation behaviour which was confirmed using several techniques including gel filtration chromatography, dynamic light scattering, and native PAGE. Molecular weight determined by SDS-PAGE followed by in-gel activity suggested two lipases of nearly similar molecular weight of ~50 kDa. The enzyme showed stability in wide range of pH from 5 to 11 and temperature up to 50 °C. The enzyme from GBPI_Hb61 exhibited maximum activity toward p-nitrophenyldecanoate (C10). The stability of enzyme was not affected with methanol while it retained more than 75% activity when incubated with ethanol, acetone, and hexane. The bacterium is likely to be a potential source for production of cold-active lipase with efficient applicability under multiple conditions.

Expression and characterization of thermotolerant lipase with broad pH profiles isolated from an Antarctic Pseudomonas sp strain AMS3

A gene encoding a thermotolerant lipase with broad pH was isolated from an Antarctic Pseudomonas strain AMS3. The recombinant lipase AMS3 was purified by single-step purification using affinity chromatography, yielding a purification fold of approximately 1.52 and a recovery of 50%. The molecular weight was approximately ∼60 kDa including the strep and affinity tags. Interestingly, the purified Antarctic AMS3 lipase exhibited broad temperature profile from 10-70 °C and stable over a broad pH range from 5.0 to pH 10.0. Various mono and divalent metal ions increased the activity of the AMS3 lipase, but Ni2+ decreased its activity. The purified lipase exhibited the highest activity in the presence of sunflower oil. In addition, the enzyme activity in 25% v/v solvents at 50 °C particularly to n-hexane, DMSO and methanol could be useful for catalysis reaction in organic solvent and at broad temperature.

Cold-adapted organic solvent tolerant alkalophilic family I.3 lipase from an Antarctic Pseudomonas

Lipolytic enzymes with cold adaptation are gaining increasing interest due to their biotechnological prospective. Previously, a cold adapted family I.3 lipase (AMS8 lipase) was isolated from an Antarctic Pseudomonas. AMS8 lipase was largely expressed in insoluble form. The refolded His-tagged recombinant AMS8 lipase was purified with 23.0% total recovery and purification factor of 9.7. The purified AMS8 lipase migrated as a single band with a molecular weight approximately 65kDa via electrophoresis. AMS8 lipase was highly active at 30°C at pH 10. The half-life of AMS8 lipase was reported at 4 and 2h under the incubation of 30 and 40°C, respectively. The lipase was stable over a broad range of pH. It showed enhancement effect in its relative activity under the presence of Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ after 30min treatment. Heavy metal ions such as Cu²⁺, Fe³⁺ and Zn²⁺ inhibited AMS8 activity. This cold adapted alkalophilic AMS lipase was also active in various organic solvent of different polarity. These unique properties of this biological macromolecule will provide considerable potential for many biotechnological applications and organic synthesis at low temperature.

Functional Characterization of a Novel Marine Microbial Esterase and its Utilization in the Enantioselective Preparation of (R)-Methyl 2-Chloropropionate

Chiral 2-chloropropanoic acids and their ester derivatives are crucial intermediates in the synthesis of many chemicals, especially herbicides. The enzymatic synthesis of chiral 2-chloropropanoic acids and their ester derivatives by esterases was not easily achieved, because the structural difference between the two enantiomers was too small to be recognized by esterases. Herein, we report the expression and functional characterization of one novel low temperature-resistant esterase EST12-7 identified from the genome of Pseudonocardia antitumoralis SCSIO 01299 isolated from the sediments of the South China Sea. Biocatalyst EST12-7 could hydrolyze racemic methyl 2-chloropropinate and generate optically pure (R)-methyl 2-chloropropinate with high enantiomeric excess (>99 %) and conversion (>49 %) after process optimization. Notably, the addition of different surfactants and using surfactants of different concentrations in the kinetic resolution catalyzed by EST12-7 could greatly affect the enantiomeric excess and conversion rate of product (R)-methyl 2-chloropropinate.

Expression, purification and characterization of a functional, recombinant, cold-active lipase (LipA) from psychrotrophic Yersinia enterocolitica

A novel cold-active lipase gene encoding 294 amino acid residues was obtained from the Yersinia enterocolitica strain KM1. Sequence alignment and phylogenetic analysis revealed that this novel lipase is a new member of the bacterial lipase family I.1. The lipase shares the conserved GXSXG motif and catalytic triad Ser85-Asp239-His261. The recombinant protein LipA was solubly and heterogeneously expressed in Escherichia coli, purified by Ni-affinity chromatography, and then characterized. LipA was active over a broad range spanning 15-60°C with an optimum activity at 25°C and across a wide pH range from 5.0 to 11.0 with an optimum activity at pH 7.5. The molecular weight was estimated to be 34.2 KDa. The lipase could be activated by Mg(2+) and a low concentration (10%) of ethanol, dimethyl sulfoxide, methanol and acetonitrile, whereas it was strongly inhibited by Zn(2+), Cu(2+) and Mn(2+). This cold-active lipase may be a good candidate for detergents and biocatalysts at low temperature.

Contribution of Disulfide Bridges to the Thermostability of a Type A Feruloyl Esterase from Aspergillus usamii

The contribution of disulfide bridges to the thermostability of a type A feruloyl esterase (AuFaeA) from Aspergillus usamii E001 was studied by introducing an extra disulfide bridge or eliminating a native one from the enzyme. MODIP and DbD, two computational tools that can predict the possible disulfide bridges in proteins for thermostability improvement, and molecular dynamics (MD) simulations were used to design the extra disulfide bridge. One residue pair A126-N152 was chosen, and the respective amino acid residues were mutated to cysteine. The wild-type AuFaeA and its variants were expressed in Pichia pastoris GS115. The temperature optimum of the recombinant (re-) AuFaeAA126C-N152C was increased by 6°C compared to that of re-AuFaeA. The thermal inactivation half-lives of re-AuFaeAA126C-N152C at 55 and 60°C were 188 and 40 min, which were 12.5- and 10-folds longer than those of re-AuFaeA. The catalytic efficiency (kcat/Km) of re-AuFaeAA126C-N152C was similar to that of re-AuFaeA. Additionally, after elimination of each native disulfide bridge in AuFaeA, a great decrease in expression level and at least 10°C decrease in thermal stability of recombinant AuEaeA variants were also observed.

Purification and characterization of an extracellular cold-adapted alkaline lipase produced by psychrotrophic bacterium Yersinia enterocolitica strain KM1

An extracellular cold-adapted alkaline lipase from the psychrotrophic Yersinia enterocolitica strain KM1 was purified 26-fold to homogeneity. The enzyme was active over a broad range spanning 0-60 °C with an optimum activity at 37 °C, and it was found to be alkaline-preferring with an optimum activity at pH 9.0. The molecular weight was estimated to be 34.3 KDa and monomeric. The lipase could be activated by Ca(2+) and low concentration (10%) of ethanol, dimethyl sulphoxide, methanol, and acetonitrile, whereas it was strongly inhibited by Zn(2+), Cu(2+), SDS, EDTA, and PMSF. Using p-nitrophenyl butyrate as a substrate at 37 °C, the Km and Vmax of the enzyme were found to be 16.58 mM and 5.24 × 10(5)  μM · min(-1), respectively. This extracellular cold-adapted alkaline lipase may be a good candidate for detergents and biocatalysts at low temperature.

A new cold-adapted, organic solvent stable lipase from mesophilic Staphylococcus epidermidis AT2

The gene encoding a cold-adapted, organic solvent stable lipase from a local soil-isolate, mesophilic Staphylococcus epidermidis AT2 was expressed in a prokaryotic system. A two-step purification of AT2 lipase was achieved using butyl sepharose and DEAE sepharose column chromatography. The final recovery and purification fold were 47.09 % and 3.45, respectively. The molecular mass of the purified lipase was estimated to be 43 kDa. AT2 lipase was found to be optimally active at pH 8 and stable at pH 6-9. Interestingly, this enzyme demonstrated remarkable stability at cold temperature (<30 °C) and exhibited optimal activity at a temperature of 25 °C. A significant enhancement of the lipolytic activity was observed in the presence of Ca(2+), Tween 60 and Tween 80. Phenylmethylsulfonylfluoride, a well known serine inhibitor did not cause complete inhibition of the enzymatic activity. AT2 lipase exhibited excellent preferences towards long chain triglycerides and natural oils. The lipolytic activity was stimulated by dimethylsulfoxide and diethyl ether, while more than 50 % of its activity was retained in methanol, ethanol, acetone, toluene, and n-hexane. Taken together, AT2 lipase revealed highly attractive biochemical properties especially because of its stability at low temperature and in organic solvents.

Adaptational properties and applications of cold-active lipases from psychrophilic bacteria

Psychrophilic microorganisms are cold-adapted with distinct properties from other thermal classes thriving in cold conditions in large areas of the earth's cold environment. Maintenance of functional membranes, evolving cold-adapted enzymes and synthesizing a range of structural features are basic adaptive strategies of psychrophiles. Among the cold-evolved enzymes are the cold-active lipases, a group of microbial lipases with inherent stability-activity-flexibility property that have engaged the interest of researchers over the years. Current knowledge regarding these cold-evolved enzymes in psychrophilic bacteria proves a display of high catalytic efficiency with low thermal stability, which is a differentiating feature with that of their mesophilic and thermophilic counterparts. Improvement strategies of their adaptive structural features have significantly benefited the enzyme industry. Based on their homogeneity and purity, molecular characterizations of these enzymes have been successful and their properties make them unique biocatalysts for various industrial and biotechnological applications. Although, strong association of lipopolysaccharides from Antarctic microorganisms with lipid hydrolases pose a challenge in their purification, heterologous expression of the cold-adapted lipases with affinity tags simplifies purification with higher yield. The review discusses these cold-evolved lipases from bacteria and their peculiar properties, in addition to their potential biotechnological and industrial applications.

Unusual carboxylesterase bearing a GGG(A)X-type oxyanion hole discovered in Paenibacillus barcinonensis BP-23

Strain Paenibacillus barcinonensis BP-23, previously isolated from Ebro's river delta (Spain), bears a complex hydrolytic system showing the presence of at least two enzymes with activity on lipidic substrates. EstA, a cell-bound B-type carboxylesterase from the strain was previously isolated and characterized. The gene coding for a second putative lipase, located upstream cellulase Cel5A, was obtained using a genome walking strategy and cloned in Escherichia coli for further characterization. The recombinant clone obtained displayed high activity on medium/short-chain fatty acid-derivative substrates. The enzyme, named Est23, was purified and characterized, showing maximum activity on pNP-caprylate (C8:0) or MUF-heptanoate (C7:0) under conditions of moderate temperature and pH. Although Est23 displays a GGG(A)X-type oxyanion hole, described as an important motif for tertiary alcohol ester resolution, neither conversion nor enantiomeric resolution of tertiary alcohols could be detected. Amino acid sequence alignment of Est23 with those of known bacterial lipase families and with closely related proteins suggests that the cloned enzyme does not belong to any of the described bacterial lipase families. A phylogenetic tree including Est23 and similar amino acid sequences showed that the enzyme belongs to a differentiated sequence cluster which probably constitutes a new family of bacterial lipolytic enzymes.

Enhancing the thermostability of a cold-active lipase from Penicillium cyclopium by in silico design of a disulfide bridge

Cysteine mutants of a cold-active lipase (PcLipI) from Penicillium cyclopium were designed by the software Disulfide by Design Ver. 1.20 in an effort to improve enzyme thermostability by addition of a disulfide bridge. Those mutants predicted by molecular dynamics simulation to have better thermostability than the wild type were first expressed in Escherichia coli BL21(DE3) and then, for further investigation, in Pichia pastoris GS115. By replacing Val248 and Thr251 with cysteines to create a disulfide bridge, the recombinant lipases reE-PcLipV248C-T251C (expressed in E. coli) and reP-PcLipV248C-T251C (expressed in P. pastoris) were obtained. Both had enhanced thermostability with half-lives at 35 °C about 4.5- and 12.8-fold longer than that of the parent PcLipI expressed in E. coli and P. pastoris, respectively. The temperature optima of reE-PcLipV248C-T251C and reP-PcLipV248C-T251C were 35 and 30 °C, which were each 5 °C higher than those of the parent PcLipI expressed in E. coli and P. pastoris. The K ms of reE-PcLipV248C-T251C and reP-PcLipV248C-T251C toward tributyrin were 53.2 and 39.5 mM, while their V maxs were 1,460 and 3,800 U/mg, respectively. PcLipV248C-T251C had better thermostability and catalytic efficiency than the other mutants and the parent PcLipI.

Cold-adapted RTX lipase from antarctic Pseudomonas sp. strain AMS8: isolation, molecular modeling and heterologous expression

A new strain of psychrophilic bacteria (designated strain AMS8) from Antarctic soil was screened for extracellular lipolytic activity and further analyzed using molecular approach. Analysis of 16S rDNA showed that strain AMS8 was similar to Pseudomonas sp. A lipase gene named lipAMS8 was successfully isolated from strain AMS8, cloned, sequenced and overexpressed in Escherichia coli. Sequence analysis revealed that lipAMS8 consist of 1,431 bp nucleotides that encoded a polypeptide consisting of 476 amino acids. It lacked an N-terminal signal peptide and contained a glycine- and aspartate-rich nonapeptide sequence at the C-terminus, which are known to be the characteristics of repeats-in-toxin bacterial lipases. Furthermore, the substrate binding site of lipAMS8 was identified as S(207), D(255) and H(313), based on homology modeling and multiple sequence alignment. Crude lipase exhibited maximum activity at 20 °C and retained almost 50 % of its activity at 10 °C. The molecular weight of lipAMS8 was estimated to be 50 kDa via sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The optimal expression level was attained using the recombinant plasmid pET32b/BL21(DE3) expressed at 15 °C for 8 h, induced by 0.1 mM isopropyl β-D thiogalactoside (IPTG) at E. coli growth optimal density of 0.5.

Increasing protein production by directed vector backbone evolution

Recombinant protein production in prokaryotic and eukaryotic organisms was a key enabling technology for the rapid development of industrial and molecular biotechnology. However, despite all progress the improvement of protein production is an ongoing challenge and of high importance for cost-effective enzyme production. With the epMEGAWHOP mutagenesis protocol for vector backbone optimization we report a novel directed evolution based approach to increase protein production levels by randomly introducing mutations in the vector backbone. In the current study we validate the epMEGAWHOP mutagenesis protocol for three different expression systems. The latter demonstrated the general applicability of the epMEGAWHOP method. Cellulase and lipase production was doubled in one round of directed evolution by random mutagenesis of pET28a(+) and pET22b(+) vector backbones. Protease production using the vector pHY300PLK was increased ~4-times with an average of ~1.25 mutations per kb vector backbone. The epMEGAWHOP does not require any rational understanding of the expression machinery and can generally be applied to enzymes, expression vectors and related hosts. epMEGAWHOP is therefore from our point of view a robust, rapid and straight forward alternative for increasing protein production in general and for biotechnological applications.

Optimization of culture conditions for production of a novel cold-active lipase from Pichia lynferdii NRRL Y-7723

Lipases with abnormal properties such as thermostability, alkalinity, acidity, and cold activity receive industrial attention because of their usability under restricted reaction conditions. Most microbial cold-active lipases originate from psychrotrophic and psychrophilic microorganisms found in Antarctic regions, which has led to difficulties in the practical production of cold-active lipase. Recently, a mesophilic yeast, Pichia lynferdii NRRL Y-7723, was reported to produce a novel cold-active lipase. This study focused on optimization of environmental factors, while giving particular attention to the relationships between given factors and incubation time, to maximize the production of a novel cold-active lipase from P. lynferdii NRRL Y-7723. Maximum lipase production was highly dependent on the incubation time at a given environmental factor. Lipase production varied with incubation time at a given temperature, and 20 °C was selected as the optimum temperature for lipase production. Fructose was selected as the best carbon source, and maximum lipase production was obtained when it was present at 0.7% (w/v). Yeast extract was an efficient organic nitrogen source, with maximum lipase production occurring at 0.9% (w/v). Specifically, at the optimum yeast extract level the lipase production was >10 times higher than the productivity under standard conditions. All natural oils tested showed lipase production, but their maximum productivities varied according to incubation time and oil species.

Crystal structure of Proteus mirabilis lipase, a novel lipase from the Proteus/psychrophilic subfamily of lipase family I.1

Bacterial lipases from family I.1 and I.2 catalyze the hydrolysis of triacylglycerol between 25-45°C and are used extensively as biocatalysts. The lipase from Proteus mirabilis belongs to the Proteus/psychrophilic subfamily of lipase family I.1 and is a promising catalyst for biodiesel production because it can tolerate high amounts of water in the reaction. Here we present the crystal structure of the Proteus mirabilis lipase, a member of the Proteus/psychrophilic subfamily of I.1lipases. The structure of the Proteus mirabilis lipase was solved in the absence and presence of a bound phosphonate inhibitor. Unexpectedly, both the apo and inhibitor bound forms of P. mirabilis lipase were found to be in a closed conformation. The structure reveals a unique oxyanion hole and a wide active site that is solvent accessible even in the closed conformation. A distinct mechanism for Ca²⁺ coordination may explain how these lipases can fold without specific chaperones.

New tools for exploring "old friends-microbial lipases"

Fat-splitting enzymes (lipases), due to their natural, industrial, and medical relevance, attract enough attention as fats do in our lives. Starting from the paper that we write, cheese and oil that we consume, detergent that we use to remove oil stains, biodiesel that we use as transportation fuel, to the enantiopure drugs that we use in therapeutics, all these applications are facilitated directly or indirectly by lipases. Due to their uniqueness, versatility, and dexterity, decades of research work have been carried out on microbial lipases. The hunt for novel lipases and strategies to improve them continues unabated as evidenced by new families of microbial lipases that are still being discovered mostly by metagenomic approaches. A separate database for true lipases termed LIPABASE has been created recently which provides taxonomic, structural, biochemical information about true lipases from various species. The present review attempts to summarize new approaches that are employed in various aspects of microbial lipase research, viz., screening, isolation, production, purification, improvement by protein engineering, and surface display. Finally, novel applications facilitated by microbial lipases are also presented.

Cloning, purification, and characterization of a cold-adapted esterase produced by Psychrobacter cryohalolentis K5T from Siberian cryopeg

A psychrotrophic gram-negative bacterium Psychrobacter cryohalolentis K5(T) was previously isolated from a cryopeg within Siberian permafrost and its genome has been completely sequenced. To clone and characterize potential cold-active lipases/esterases produced by P. cryohalolentis K5(T) , we have identified their potential genes by alignment with amino acid sequences of lipases/esterases from related bacteria. One of the targets, EstPc, was cloned and overexpressed in Escherichia coli BL21 (DE3) cells. The recombinant protein was produced with a 6x histidine tag at its C-terminus and purified by nickel affinity chromatography. Purified recombinant protein displayed maximum esterolytic activity with p-nitrophenyl butyrate (C4) as a substrate at 35 °C and pH 8.5. Activity assay conducted at different temperatures revealed that EstPc is a cold-adapted esterase which displayed more than 90% of its maximum activity at 0-5 °C. In contrast to many known cold-active enzymes, it possesses relatively high thermostability, preserving more than 60% of activity after incubation for 1 h at 80 °C. It was activated by Ca(2+) , Mn(2+) , and EDTA whereas Zn(+2) , Cu(+2) , Co(+2) , Ni(+2) , and Mg(+2) inhibited it. Various organic solvents (ethanol, methanol and others) inhibited the enzyme. Most non-ionic detergents, such as Triton X-100 and Tween 20 increased the lipase activity while SDS completely inhibited it.

Isolation and characterization of EstC, a new cold-active esterase from Streptomyces coelicolor A3(2)

The genome sequence of Streptomyces coelicolor A3(2) contains more than 50 genes coding for putative lipolytic enzymes. Many studies have shown the capacity of this actinomycete to store important reserves of intracellular triacylglycerols in nutrient depletion situations. In the present study, we used genome mining of S. coelicolor to identify genes coding for putative, non-secreted esterases/lipases. Two genes were cloned and successfully overexpressed in E. coli as His-tagged fusion proteins. One of the recombinant enzymes, EstC, showed interesting cold-active esterase activity with a strong potential for the production of valuable esters. The purified enzyme displayed optimal activity at 35°C and was cold-active with retention of 25% relative activity at 10°C. Its optimal pH was 8.5-9 but the enzyme kept more than 75% of its maximal activity between pH 7.5 and 10. EstC also showed remarkable tolerance over a wide range of pH values, retaining almost full residual activity between pH 6-11. The enzyme was active toward short-chain p-nitrophenyl esters (C2-C12), displaying optimal activity with the valerate (C5) ester (k(cat)/K(m) = 737±77 s(-1) mM(-1)). The enzyme was also very active toward short chain triglycerides such as triacetin (C2:0) and tributyrin (C4:0), in addition to showing good primary alcohol and organic solvent tolerance, suggesting it could function as an interesting candidate for organic synthesis of short-chain esters such as flavors.

Differential induction, purification and characterization of cold active lipase from Yarrowia lipolytica NCIM 3639

The production, purification and characterization of cold active lipases by Yarrowia lipolytica NCIM 3639 is described. The study presents a new finding of production of cell bound and extracellular lipase activities depending upon the substrate used for growth. The strain produced cell bound and extracellular lipase activity when grown on olive oil and Tween 80, respectively. The organism grew profusely at 20 °C and at initial pH of 5.5, producing maximum extracellular lipase. The purified lipase has a molecular mass of 400 kDa having 20 subunits forming a multimeric native protein. Further the enzyme displayed an optimum pH of 5.0 and optimum temperature of 25 °C. Peptide mass finger printing reveled that some peptides showed homologues sequence (42%) to Yarrowia lipolytica LIP8p. The studies on hydrolysis of racemic lavandulyl acetate revealed that extracellular and cell bound lipases show preference over the opposite antipodes of irregular monoterpene, lavandulyl acetate.

A novel cold-adapted lipase from Acinetobacter sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k(cat) = 560.52 ± 28.32 s(-1), K(m) = 0.075 ± 0.008 mM, and a k(cat)/K(m) = 7,377.29 ± 118.88 s(-1) mM(-1). Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.

Effects of co-expression of molecular chaperones on heterologous soluble expression of the cold-active lipase Lip-948

The cold-active lipase gene Lip-948, cloned from Antarctic psychrotrophic bacterium Psychrobacter sp. G, was ligated into plasmid pColdI. The recombinant plasmid pColdI+Lip-948 was then transformed into Escherichia coli BL21. SDS-PAGE analysis showed that there was substantive expression of lipase LIP-948 in E. coli with a yield of about 39% of total protein, most of which was present in the inclusion body. The soluble protein LIP-948 only consisted of 1.7% of total LIP-948 with a specific activity of 66.51U/mg. Co-expression of molecular chaperones with the pColdI+Lip-948 were also carried out. The results showed that co-expression of different chaperones led to an increase or decrease in the formation of soluble LIP-948 in varying degrees. Co-expression of pColdI+Lip-948 with chaperone pTf16 and pGro7 decreased the amount of soluble LIP-948, while the soluble expression was enhanced when pColdI+Lip-948 was co-expressed with "chaperone team" plasmids (pKJE7, pG-Tf2, pG-KJE8), respectively. LIP-948 was most efficiently expressed in soluble form when it was co-expressed with pG-KJE8, which was up to 19.8% of intracellular soluble proteins and with a specific activity of 108.77U/mg. The soluble LIP-948 was purified with amylase affinity chromatography and its enzymatic characters were studied. The optimal temperature and pH of LIP-948 was 35°C and 8, respectively. The activity of LIP-948 dropped dramatically after incubation at 50°C for 15min and was enhanced by Sr(2+), Ca(2+). It preferentially hydrolyzed 4-nitrophenyl esters with the shorter carbon chain.