The novel method for isolating chitinolytic bacteria and its application in screening for hyperchitinase producing mutant of Alcaligenes xylosoxydans

Recent advances in the bioprospection and applications of chitinolytic bacteria for valorization of waste chitin

One of the most abundant natural polymers on earth, chitin is a fibrous and structural polysaccharide, composed of N-acetyl-D-glucosamine. The biopolymer is the major structural constituent of fungi, arthropods, mollusks, nematodes, and some algae. The biodegradation of chitin is largely manifested by chitinolytic enzyme secreting organisms including bacteria, insects, and plants. Among them, bacterial chitinases represent the most promising, inexpensive, and sustainable source of proteins that can be employed for industrial-scale applications. To this end, the presented review comes at a timely moment to highlight the major sources of chitinolytic bacteria. It also discusses the potential pros and cons of prospecting bacterial chitinases that can be easily manipulated through genetic engineering. Additionally, we have elaborated the recent applications of the chitin thereby branding chitinases as potential candidates for biorefinery and biomedical research for eco-friendly and sustainable management of chitin waste in the environment.

Production and statistical optimization of Paromomycin by Streptomyces rimosus NRRL 2455 in solid state fermentation

BACKGROUND

Paromomycin is a 2-deoxystreptamine aminocyclitol aminoglycoside antibiotic with broad spectrum activity against Gram-negative, Gram-positive bacteria and many protozoa. This study introduces a strategy for paromomycin production through solid-state fermentation using Streptomyces rimosus subsp. paromomycinus NRRL 2455. Solid state fermentation has gained enormous attention in the development of several products because of their numerous advantages over submerged liquid fermentation. After selecting the best solid substrate, a time course study of paromomycin production was carried out followed by optimization of environmental conditions using response surface methodology. Paromomycin yields obtained using this technique were also compared to those obtained using submerged liquid fermentation.

RESULTS

Upon screening of 6 different substrates, maximum paromomycin concentration (0.51 mg/g initial dry solids) was obtained with the cost-effective agro-industrial byproduct, corn bran, impregnated with aminoglycoside production media. Optimization of environmental conditions using D-optimal design yielded a 4.3-fold enhancement in paromomycin concentration reaching 2.21 mg/g initial dry solids at a pH of 8.5, inoculum size of 5% v/w and a temperature of 30 °C.

CONCLUSION

Compared to submerged liquid fermentation, solid state fermentation resulted in comparable paromomycin concentrations, cost reduction of raw materials, less energy consumption and waste water discharge, which have major implications in industrial fermentation. Therefore, solid state fermentation is a promising alternative to submerged liquid fermentation for paromomycin production. To the best of our knowledge, this is the first report on the optimized paromomycin production through solid state fermentation process.

Identification and Characterization of a Newly Isolated Chitinase-Producing Strain Bacillus licheniformis SSCL-10 for Chitin Degradation

Chitinases or chitinolytic enzymes have different applications in the field of medicine, agriculture, and industry. The present study is aimed at developing an effective hyperchitinase-producing mutant strain of novel Bacillus licheniformis. A simple and rapid methodology was used for screening potential chitinolytic microbiota by chemical mutagenesis with ethylmethane sulfonate and irradiation with UV. There were 16 mutant strains exhibiting chitinase activity. Out of the chitinase-producing strains, the strain with maximum chitinase activity was selected, the protein was partially purified by SDS-PAGE, and the strain was identified as Bacillus licheniformis (SSCL-10) with the highest specific activity of 3.4 U/mL. The induced mutation model has been successfully implemented in the mutant EMS-13 (20.2 U/mL) that produces 5-6-fold higher yield of chitinase, whereas the mutant UV-11 (13.3 U/mL) has 3-4-fold greater chitinase activity compared to the wild strain. The partially purified chitinase has a molecular weight of 66 kDa. The wild strain (SSCL-10) was identified as Bacillus licheniformis using 16S rRNA sequence analysis. This study explores the potential applications of hyperchitinase-producing bacteria in recycling and processing chitin wastes from crustaceans and shrimp, thereby adding value to the crustacean industry.

Optimized Production of the Allylamine Antifungal "Terbinafine" by Lysinibacillus Isolate MK212927 Using Response Surface Methodology

Purpose

We aimed to optimize the factors affecting the production of the allylamine antifungal, terbinafine, by Lysinibacillus isolate MK212927, a natural producer of this broad-spectrum fungicidal compound.

Methods

We employed a central composite design to optimize the five most important variables influencing the production of terbinafine which were carbon source, nitrogen source, temperature, pH and agitation.

Results

The optimum conditions were found to be starch 5 g/L, ammonium chloride 5 g/L, temperature 32°C, agitation 150 rpm and pH 7. The actual response (inhibition zone diameter) was highly comparable to the value predicted by the model, indicating a valid model. Using the standard calibration curve of terbinafine, the optimized conditions resulted in an increase in the antifungal metabolite production (terbinafine) by about 1.6-fold (1814.662 µg/mL compared to 1165.550 µg/mL under standardized conditions).

Conclusion

This is the first report, to the best of our knowledge, on optimized production of terbinafine by Lysinibacillus species. Hence, these findings may be useful as baseline data for scaling up the production of terbinafine from a natural microbial source.

Optimization of process parameters for improved chitinase activity from Thermomyces sp. by using artificial neural network and genetic algorithm

Chitinase is responsible for the breaking down of chitin to N-acetyl-glucosamine units linked through (1-4)-glycosidic bond. The chitinases find several applications in waste management and pest control. The high yield with characteristics thermal stability of chitinase is the key to their industrial application. Therefore, the present work focuses on parameter optimization for chitinase production using fungus Thermomyces lanuginosus MTCC 9331. Three different optimization approaches, namely, response surface methodology (RSM), artificial neural network (ANN) and genetic algorithm (GA) were used. The parameters under study were incubation time, pH and inoculum size. The central composite design with RSM was used for the optimization of the process parameters. Further, results were validated with GA and ANN. A multilayer feed-forward algorithm was performed for ANN, i.e., Levenberg-Marquardt, Bayesian Regularization, and Scaled Conjugate Gradient. The ANN predicted values gave higher chitinase activity, i.e., 102.24 U/L as compared to RSM-predicted values, i.e., 88.38 U/L. The predicted chitinase activity was also closer to the observed data at these levels. The validation study suggested that the highest activity of chitinase as predicted by ANN is in line with experimental analysis. The comparison of three different statistical approaches suggested that ANN gives better optimization results compared to the GA and RSM study.

Modifications of microcrystalline cellulose (MCC), nanofibrillated cellulose (NFC), and nanocrystalline cellulose (NCC) for antimicrobial and wound healing applications

Recently, great attention has been paid to nano-composites of cellulose, due to their unique structure as a most abundant natural polymer with having exceptional properties such as renewable, biodegradable and high specific tensile strength, aspect ratio, and Young’s modulus. Prominent cellulose is naturally present in plant lignocellulosic biomass as a biocomposite made of cellulose, hemi-celluloses, lignin, etc. In addition, it can be extracted from other natural sources including bacteria, algae, and sea animals. Microcrystalline cellulose (MCC), nanocrystalline cellulose (NCC), and nanofibrillated cellulose (NFC) is an emerging renewable nanomaterial that has various applications, such as food, paper production, industrial and pharmaceutical biomaterials. The surface modification on NCC can improves its disperse ability in different solvents and its utilization in protein immobilization, tissue engineering, drug delivery, and inorganic reaction template. Therefore, based on recent studies, this review illustrated considerable progresses with addressing medicinal properties involving antimicrobial and biocompatibility of nano-cellulose (NC) in the case of wound healing.

Biocontrol Activities of Gamma Induced Mutants of Trichoderma harzianum against some Soilborne Fungal Pathogens and their DNA Fingerprinting

BACKGROUND

Random induced mutation by gamma radiation is one of the genetic manipulation strategies to improve the antagonistic ability of biocontrol agents.

OBJECTIVES

This study aimed to induce mutants with more sporulation, colonization rate leading to enhanced antagonistic ability (in vitro assay) comparing to wild type (WT) and the assessment of genetic differences (in situ evaluation) using molecular markers. The superior mutants could be appropriate biocontrol agents against soil borne fungal diseases.

MATERIALS AND METHODS

In this research sampling and isolation of Trichoderma isolates were performed from soils with low incidence of soil borne disease. T. harzianum 65 was selected and irradiation was conducted with gammacell at optimal dose 250 Gray/s. Mutants (115) were obtained from the WT. The antagonistic abilities of twenty-four mutants were evaluated using dual culture and culture filtrate tests.

RESULTS

The results of in vitro assays revealed that Th15, Th11 and Th1 mutants exhibited stronger growth inhibition (GI) and colonization rate on Macrophomina phaseolina and Rhizoctonia solani AG4 compared to the wild type. Th15 and Th11 mutants exhibited stronger GI and colonization rate on Sclerotinia sclerotiorum in dual culture and culture filtrate tests and Th1 and Th11 mutants exhibited stronger GI on Fusarium grminearum in culture filtrate test. The DNA fingerprinting was carried out using RAPD and rep-PCR markers. Two (Th9 and Th17) out of the 24 mutants categorized distantly from the rest based on different polymorphism obtained by molecular markers. However, Th9 was different in GI% from Th17. RAPD analysis separated WT from mutants, Th9 from Th17 and also phenotypically superior mutants from other mutants. Meanwhile, rep-PCR analysis categorized WT isolate and mutants according to their antagonistic properties.

CONCLUSIONS

The latter marker (rep-PCR) appeared to be reproducible and simple to distinguish mutants from a single isolate of T. harzianum. Mutants (3 isolates) were phenotypically and genotypically distinct from WT. These mutants demonstrated a pronounced biocontrol activities against soilborne fungal phytopathogens.

Isolation and complete genome sequence of the thermophilic Geobacillus sp. 12AMOR1 from an Arctic deep-sea hydrothermal vent site

Members of the genus Geobacillus have been isolated from a wide variety of habitats worldwide and are the subject for targeted enzyme utilization in various industrial applications. Here we report the isolation and complete genome sequence of the thermophilic starch-degrading Geobacillus sp. 12AMOR1. The strain 12AMOR1 was isolated from deep-sea hot sediment at the Jan Mayen hydrothermal Vent Site. Geobacillus sp. 12AMOR1 consists of a 3,410,035 bp circular chromosome and a 32,689 bp plasmid with a G + C content of 52 % and 47 %, respectively. The genome comprises 3323 protein-coding genes, 88 tRNA species and 10 rRNA operons. The isolate grows on a suite of sugars, complex polysaccharides and proteinous carbon sources. Accordingly, a versatility of genes encoding carbohydrate-active enzymes (CAZy) and peptidases were identified in the genome. Expression, purification and characterization of an enzyme of the glycoside hydrolase family 13 revealed a starch-degrading capacity and high thermal stability with a melting temperature of 76.4 °C. Altogether, the data obtained point to a new isolate from a marine hydrothermal vent with a large bioprospecting potential.

Complete genome sequence of Serratia multitudinisentens RB-25(T), a novel chitinolytic bacterium

Serratia multitudinisentens RB-25(T) (=DSM 28811(T) =LMG 28304(T)) is a newly proposed type strain in the genus of Serratia isolated from a municipal landfill site. Here, we present the complete genome of S. multitudinisentens RB-25(T) which contains a complete chitinase operon and other chitin and N-acetylglucosamine utilisation enzymes. To our knowledge, this is the first report of the complete genome sequence of this novel isolate and its chitinase gene discovery.

Chitinolytic assay of indigenous Trichoderma isolates collected from different geographical locations of Chhattisgarh in Central India

Chitin is the second most abundant polymer in nature after cellulose and plays a major role in fungal cell walls. As a producer of variety of chitinase enzymes Trichoderma has become an important means of biological control of fungal diseases. A simple and sensitive method based on the use of basal medium with colloidal chitin as sole carbon source supplemented with Bromo cresol purple (pH indicator dye) is proposed to evaluate large populations of Trichoderma for chitinase activity. The soluble substrate with pH indicator dye (Bromo cresol purple, BCP) for the assay of chitinase activity on solid media is sensitive, easy, reproducible semi-quantitative enzyme diffusion plate assay and economic option to determine chitinases. Colloidal chitin derived from Rhizoctonia cell wall and commercial chitin included as a carbon source in broth also allowed selection and comparison of chitinolytic and exochitinase activity in Trichoderma spectrophotometrically. Released N-acetyl-β--D-glucosamine (NAGA) ranged from 37.67 to 174.33 mg/ml and 37.67 to 327.67 mg/ml and p-nitrophenol (pNP) ranged from 0.17 to 35.78 X 10(-3) U/ml and 0.62 to 32.6 X 10(-3) U/ml) respectively with Rhizoctonia cell wall and commercial chitin derived colloidal chitin supplemented broth.

Optimization of media components for chitinase production by chickpea rhizosphere associated Lysinibacillus fusiformis B-CM18

Chitinase producing strain B-CM18 was isolated from chickpea rhizosphere and identified as Lysinibacillus fusiformis B-CM18. It showed in vitro antifungal activity against a wide range of fungal plant pathogens and was found to produce several PGPR activities. Further, a multivariate response surface methodology was used to evaluate the effects of different factors on chitinolytic activity and optimizing enzyme production. A central composite design was employed to achieve the highest chitinase production at optimum values of the process variables, viz., temperature (20-45 °C), sodium chloride (2-7%), starch (0.1-1%) and yeast extract (0.1-1%), added in the minimal medium supplemented with colloidal chitin (1-10%; w:w). The fit of the model (R(2)  = 0.5692) was found to be significant. The production medium to achieve the highest chitinase production (101 U ml(-1) ) was composed of the minimal medium composed of chitin (6.09%), NaCl (4.5%), starch (0.55%) and yeast extract (0.55%) with temperature (32.5 °C). The results show that the optimization strategy led to an increase in chitinase production by 56.1-fold. The molecular mass of the chitinase was estimated to be 20 kDa by anion exchange and gel filtration chromatography. Further, purified chitinase showed strong antifungal activity against test pathogens. Overall, these results may serve as a base line data for enhancing the chitinolytic potential of bacterial antagonists for bio-management of chickpea pathogens.

Purification of an antifungal endochitinase from a potential biocontrol Agent Streptomyces griseus

Streptomyces griseus (MTCC 9723) is a chitinolytic bacterium isolated from prawn cultivated pond soil of Peddapuram Village; East Godavari District was studied in detailed. Chitinase (EC 3.2.1.14) was extracted from the culture filtrate of Streptomyces griseus and purified by ammonium sulfate precipitation, DEAE-cellulose ionexchange chromatography, Sephadex G-100 and Sephadex G-200 gel filtration chromatography. The molecular mass of the purified chitinase was estimated to be 34, 32 kDa by SDS gel electrophoresis and confirmed by activity staining with Calcofluor White M2R. Chitinase was optimally active at pH of 6.0 and at 40 degrees C. The enzyme was stable from pH 5-9 and up to 20-50 degrees C. The chitinase exhibited Km and Vmax values of 400 mg and 180 IU mL(-1) for colloidal chitin. Among the metals and inhibitors that were tested, the Hg+, Hg2+ and P-chloromercuribenzoic acid completely inhibited the chitinase activity at 1 mM concentration. The purified chitinase showed high activity on colloidal chitin, chitobiose, and chitooligosaccharide. An in vitro assay proved that the crude chitinase, actively growing cells of S. griseus having antifungal activity against all studied fungal pathogen. This result implies that characteristics of S. griseus producing endochitinase made them suitable for biotechnological purpose such as for degradation of chitin containing waste and it might be a promising biocontrol agent for plant pathogens.

Mining marine shellfish wastes for bioactive molecules: chitin and chitosan--Part A: extraction methods

Legal restrictions, high costs and environmental problems regarding the disposal of marine processing wastes have led to amplified interest in biotechnology research concerning the identification and extraction of additional high grade, low-volume by-products produced from shellfish waste treatments. Shellfish waste consisting of crustacean exoskeletons is currently the main source of biomass for chitin production. Chitin is a polysaccharide composed of N-acetyl-D-glucosamine units and the multidimensional utilization of chitin derivatives including chitosan, a deacetylated derivative of chitin, is due to a number of characteristics including: their polyelectrolyte and cationic nature, the presence of reactive groups, high adsorption capacities, bacteriostatic and fungistatic influences, making them very versatile biomolecules. Part A of this review aims to consolidate useful information concerning the methods used to extract and characterize chitin, chitosan and glucosamine obtained through industrial, microbial and enzymatic hydrolysis of shellfish waste.

Characterization of a chitinolytic enzyme from Serratia sp. KCK isolated from kimchi juice

The novel chitinolytic bacterium Serratia sp. KCK, which was isolated from kimchi juice, produced chitinase A. The gene coding for the chitinolytic enzyme was cloned on the basis of sequencing of internal peptides, homology search, and design of degenerated primers. The cloned open reading frame of chiA encodes for deduced polypeptide of 563 amino acid residues with a calculated molecular mass of 61 kDa and appears to correspond to a molecular mass of about 57 kDa, which excluded the signal sequence. The deduced amino acid sequence showed high similarity to those of bacterial chitinases classified as family 18 of glycosyl hydrolases. The chitinase A is an exochitinase and exhibits a greater pH range (5.0-10.0), thermostability with a temperature optimum of 40 degrees C, and substrate range other than Serratia chitinases thus far described. These results suggested that Serratia sp. KCK chitinase A can be used for biotechnological applications with good potential.

Isolation and characterization of mutants of Pseudomonas maltophila PM-4 altered in chitinolytic activity and antagonistic activity against root rot pathogens of clusterbean (Cyamopsis tetragonoloba)

Pseudomonas maltophila PM-4, an antagonist of pathogenic fungi including Rhizoctonia bataticola, R. solani, Fusarium oxysporum and Sclerotinia sclerotiorum associated with root rot of clusterbean (Cyamopsis tetragonoloba) was mutagenized with Tn5. Hyperchitinase producing mutants showing large zone of colloidal chitin dissolution were identified on medium containing calcoflor dye as an indicator. A mutant P-48 producing 137% higher chitinase activity than the parent strain PM-4 was identified. Seed bacterization of clusterbean (Cyamopsis tetragonoloba) with P-48 controlled the root rot upto 40.8% in the presence of conglomerate of all the four fungal pathogens Rhizoctonia bataticola, R. solani, F. oxysporum and Sclerotinia sclerotiorum.