Covalent linkage of recombinant hirudin to a novel ionic poly(carbonate) urethane polymer with protein binding sites: determination of surface antithrombin activity

Blood compatible materials: state of the art

Devices that function in contact with blood are ubiquitous in clinical medicine and biotechnology. These devices include vascular grafts, coronary stents, heart valves, catheters, hemodialysers, heart-lung bypass systems and many others. Blood contact generally leads to thrombosis (among other adverse outcomes), and no material has yet been developed which remains thrombus-free indefinitely and in all situations: extracorporeally, in the venous circulation and in the arterial circulation. In this article knowledge on blood-material interactions and "thromboresistant" materials is reviewed. Current approaches to the development of thromboresistant materials are discussed including surface passivation; incorporation and/or release of anticoagulants, antiplatelet agents and thrombolytic agents; and mimicry of the vascular endothelium.

Selective albumin-binding surfaces modified with a thrombin-inhibiting peptide

Blood-contacting medical devices have been associated with severe clinical complications, such as thrombus formation, triggered by the activation of the coagulation cascade due to the adsorption of certain plasma proteins on the surface of biomaterials. Hence, the coating of such surfaces with antithrombotic agents has been used to increase biomaterial haemocompatibility. Biomaterial-induced clotting may also be decreased by albumin adsorption from blood plasma in a selective and reversible way, since this protein is not involved in the coagulation cascade. In this context, this paper reports that the immobilization of the thrombin inhibitor D-Phe-Pro-D-Arg-D-Thr-CONH2 (fPrt) onto nanostructured surfaces induces selective and reversible adsorption of albumin, delaying the clotting time when compared to peptide-free surfaces. fPrt, synthesized with two glycine residues attached to the N-terminus (GGfPrt), was covalently immobilized onto self-assembled monolayers (SAMs) having different ratios of carboxylate-hexa(ethylene glycol)- and tri(ethylene glycol)-terminated thiols (EG6-COOH/EG3) that were specifically designed to control GGfPrt orientation, exposure and density at the molecular level. In solution, GGfPrt was able to inactivate the enzymatic activity of thrombin and to delay plasma clotting time in a concentration-dependent way. After surface immobilization, and independently of its concentration, GGfPrt lost its selectivity to thrombin and its capacity to inhibit thrombin enzymatic activity against the chromogenic substrate n-p-tosyl-Gly-Pro-Arg-p-nitroanilide. Nevertheless, surfaces with low concentrations of GGfPrt could delay the capacity of adsorbed thrombin to cleave fibrinogen. In contrast, GGfPrt immobilized in high concentrations was found to induce the procoagulant activity of the adsorbed thrombin. However, all surfaces containing GGfPrt have a plasma clotting time similar to the negative control (empty polystyrene wells), showing resistance to coagulation, which is explained by its capacity to adsorb albumin in a selective and reversible way. This work opens new perspectives to the improvement of the haemocompatibility of blood-contacting medical devices.

Is there an alternative to systemic anticoagulation, as related to interventional biomedical devices?

To reduce the toxic effects, related clinical problems and complications such as bleeding disorders associated with systemic anticoagulation, it has been hypothesized that by coating the surfaces of medical devices, such as stents, bypass grafts, extracorporeal circuits, guide wires and catheters, there will be a significant reduction in the requirement for systemic anticoagulation or, ideally, it will no longer be necessary. However, current coating processes, even covalent ones, still result in leaching followed by reduced functionality. Alternative anticoagulants and related antiplatelet agents have been used for improvement in terms of reduced restenosis, intimal hyperphasia and device failure. This review focuses on existing heparinization processes, their application in clinical devices and the updated list of alternatives to heparinization in order to obtain a broad overview, it then highlights, in particular, the future possibilities of using heparin and related moieties to tissue engineer scaffolds.

Bioactive technologies for hemocompatibility

The contact of any biomaterial with blood gives rise to multiple pathophysiologic defensive mechanisms such as activation of the coagulation cascade, platelet adhesion and activation of the complement system and leukocytes. The reduction of these events is of crucial importance for the successful clinical performance of a cardiovascular device. This can be achieved by improving the hemocompatibility of the device materials or by pharmacologic inhibition of the key enzymes responsible for the activation of the cascade reactions, or a combination of both. Different strategies have been developed during the last 20 years, and this article attempts to review the most significant, by dividing them into three main categories: bioinert or biopassive, biomimetic and bioactive strategies. With regard to bioactive strategies, particular attention is given to heparin immobilization and recent related technologies. References from both scientific literature and commercial sites are provided. Future development and studies are suggested.

Bioengineered surfaces to improve the blood compatibility of biomaterials through direct thrombin inactivation

Thrombus formation, due to thrombin generation, is a major problem affecting blood-contacting medical devices. This work aimed to develop a new strategy to improve the hemocompatibility of such devices by the immobilization of a naturally occurring thrombin inhibitor into a nanostructured surface. Boophilin, a direct thrombin inhibitor from the cattle tick Rhipicephalus microplus, was produced as a recombinant protein in Pichia pastoris. Boophilin was biotinylated and immobilized on biotin-terminated self-assembled monolayers (SAM) via neutravidin. In order to maintain its proteinase inhibitory capacity after surface immobilization, boophilin was biotinylated after the formation of a boophilin-thrombin complex to minimize the biotinylation of the residues involved in thrombin-boophilin interaction. The extent of boophilin biotinylation was determined using matrix-assisted laser desorption/ionization-time of flight/time of flight mass spectrometry. Boophilin immobilization and thrombin adsorption were quantified using quartz crystal microbalance with dissipation. Thrombin competitive adsorption from human serum was assessed using ¹²⁵I-thrombin. Thrombin inhibition and plasma clotting time were determined using spectrophotometric techniques. Boophilin-coated SAM were able to promote thrombin adsorption in a selective way, inhibiting most of its activity and delaying plasma coagulation in comparison with boophilin-free surfaces, demonstrating boophilin's potential to improve the hemocompatibility of biomaterials used in the production of blood-contacting devices.

Scaffolds in tissue engineering of blood vessels

Tissue engineering of small diameter (<5 mm) blood vessels is a promising approach for developing viable alternatives to autologous vascular grafts. It involves in vitro seeding of cells onto a scaffold on which the cells attach, proliferate, and differentiate while secreting the components of extracellular matrix that are required for creating the tissue. The scaffold should provide the initial requisite mechanical strength to withstand in vivo hemodynamic forces until vascular smooth muscle cells and fibroblasts reinforce the extracellular matrix of the vessel wall. Hence, the choice of scaffold is crucial for providing guidance cues to the cells to behave in the required manner to produce tissues and organs of the desired shape and size. Several types of scaffolds have been used for the reconstruction of blood vessels. They can be broadly classified as biological scaffolds, decellularized matrices, and polymeric biodegradable scaffolds. This review focuses on the different types of scaffolds that have been designed, developed, and tested for tissue engineering of blood vessels, including use of stem cells in vascular tissue engineering.

Direct chemical cross-linking of platelet-derived growth factor-BB to the demineralized bone matrix improves cellularization and vascularization

In previous studies, we have described the use of demineralized bone matrix (DBM) as a carrier for the localized delivery system of growth factors in vitro and in vivo. The aim of the present work was to develop a direct chemical approach to immobilize the platelet-derived growth factor-BB (PDGF-BB) on DBM with cross-linking reagents. The amount of PDGF-BB covalently immobilized on DBM was significantly increased. The increased proliferation of fibroblasts demonstrated that the biological activity of PDGF-BB was not significantly reduced by cross-linking. Compared with control groups, there was a statistically significant increase in blood vessel density in the PDGF-C-DBM group after having been subcutaneously implanted into the dorsal side of the rats. The surface bioactivity of scaffolds on stimulation cell and new blood vessel invasion was improved. Therefore, the direct chemical cross-linking approach could be used to retain growth factors on collagen scaffolds effectively to develop functional biomaterials.

Modified prosthetic vascular conduits

Atherosclerosis in the form of peripheral arterial disease results in significant morbidity. Surgical treatment options for peripheral arterial disease include angioplasty, endarterectomy, and bypass grafting. For bypass grafting, vein remains the conduit of choice; however, poor quality and limited availability have led to the use of prosthetic materials. Unfortunately, because of a lack of endothelium and compliance mismatch, neointimal hyperplasia develops aggressively, resulting in high failure rates. To improve graft patency, investigators have developed surgical, chemical, and biological graft modifications. This review describes common prosthetic materials, as well as approaches currently in use and under investigation to modify and improve prosthetic conduits for bypass grafting in an effort to improve graft patency rates.

Development of small-diameter vascular grafts

INTRODUCTION

Cardiovascular disease, including coronary artery and peripheral vascular pathologies, is the leading cause of mortality in the United States and Western countries. There is a pressing need to develop small-diameter vascular vessels for bypass surgery and other vascular reconstructive procedures. Tissue engineering offers the prospect of being able to meet the demand for replacement of diseased vessels. Significant advances have been made in recent studies and provide confidence that success is attainable. For instance, a completely cellular approach culturing cells into tissue sheets and wrapping these layers was able to form a layered cellular vascular graft with impressive strength.

METHODS/RESULTS

In our experiments, decellularization and heparin immobilization grafts from porcine tissues implanted in a canine model could be repopulated from the host cells, indicating the grafts' potential to develop into living tissues that can adapt and respond to changes in the body.

CONCLUSIONS

This review summarizes the current status of vascular grafts used clinically, updates the most recent developments on vascular tissue engineering, and discusses the challenges for the future.

Novel thromboresistant materials

The development of a clinically durable small-diameter vascular graft as well as permanently implantable biosensors and artificial organ systems that interface with blood, including the artificial heart, kidney, liver, and lung, remain limited by surface-induced thrombotic responses. Recent breakthroughs in materials science, along with a growing understanding of the molecular events that underlay thrombosis, has led to the design and clinical evaluation of a variety of biologically active coatings that inhibit components of the coagulation pathway and platelet responses by surface immobilization or controlled release of bioactive agents. This report reviews recent progress in generating synthetic thromboresistant surfaces that inhibit (1) protein and cell adsorption, (2) thrombin and fibrin formation, and (3) platelet activation and aggregation.

Surface Heparinization of Polyurethane Via Bromoalkylation of Hard Segment Nitrogens

Previous research from our group has demonstrated that bromoalkylation of polyurethane elastomers via base mediated activation of the urethane-hard segment nitrogen groups can be used to either attach bisphosphonate groups to confer calcification resistance or append cholesterol to promote endothelial cell adhesion. In the present studies we further explore the potential of this chemical approach by investigating bulk carboxylation of polyurethanes via bromoalkylation to enable surface heparinization for thromboresistance. Thus, polyurethane (PU) was modified with pendant 7-carboxy-5-thiaheptyl groups using a polymer-analogous reaction of bromobutylated PU with tetrabutylammonium 3-mercaptopropionate in mild conditions. The grafting of polyallylamine (PAA) onto the surface of carboxylated PU via direct coupling of amino and carboxy groups resulted in high levels of PAA (up to 8 mug/cm(2)). The surface-aminated PU was further covalently modified with unfractionated heparin as confirmed by FTIR. Fluorescence labeling of PAA hydrochloride and heparin with BODIPY-FL was used to quantify the extent of surface modifications. Heparin was covalently bound at a high level (1.11 +/- 0.06 mug/cm(2)) and was shown to be active, with demonstrable Factor Xa inhibition and platelet factor IV binding. It is concluded that surface amination of bulk-carboxylated PU represents a novel approach for heparinizing PU; carboxylation followed by surface amination represents another important dimension of bromo-alkyl activation of polyurethane hard segments, thereby enabling heparinization.

Enhancing the blood compatibility of ion-selective electrodes

In vivo monitoring of various analytes is important for many bioanalytical and biomedical applications. The crucial challenge in this type of applications is the interaction of the sensor with the host environment, which is qualitatively described by the term biocompatibility. This review discusses recent advances in methods and materials used for the improvement of the biocompatibility of ion-selective electrodes especially as it relates to their interaction with blood components.

Tissue-engineered blood vessels: alternative to autologous grafts?

Although vascular bypass grafting remains the mainstay for revascularization for ischemic heart disease and peripheral vascular disease, many patients do not have healthy vessels suitable for harvest. Thus, prosthetic grafts made of synthetic polymers were developed, but their use is limited to high-flow/low-resistance conditions because of poor elasticity, low compliance, and thrombogenicity of their synthetic surfaces. To fill this need, several laboratories have produced in vivo or in vitro tissue-engineered blood vessels using molds or prosthetic or biodegradable scaffolds, but each artificial graft has significant problems. Recently, conduits have been grown in the peritoneal cavity of the same animals in which they will be grafted, ensuring no rejection, in the short time of 2 to 3 weeks. Remodeling occurs after grafting such that the tissue is almost indistinguishable from native vessels. This conduit is derived from cells of bone marrow origin, opening new possibilities in vascular modeling and remodeling.

Anticoagulant and antiplatelet agents: their clinical and device application(s) together with usages to engineer surfaces

An essential aspect of the treatment of patients with cardiovascular disease is the use of anticoagulant and antiplatelet agents for the prevention of further ischaemic events and vascular death resulting from thrombosis. Aspirin and heparin have been the standard therapy for the management of such conditions to date. Recently, numerous more potent platelet inhibitors together with anticoagulant agents have been developed and tested in randomized clinical trials. This article reviews the current state of the art of antiplatelet and anticoagulant therapy in light of its potential clinical efficacy. It then focuses on the usages of these agents in order to improve the performance of clinical devices such as balloon catheters, coronary stents, and femoropopliteal bypass grafting and extra corporeal circuits for cardiopulmonary bypass. The article then goes on to look at the usage of these agents more specifically heparin, heparan, hirudin, and coumarin in the development of more biocompatible scaffolds for tissue engineering.

Activated polyurethane modified with latent thiol groups

A novel type of modified polyurethane with pendant acetylthio groups (as a latent form of thiol groups) has been proposed for the use in surface modifications with various biomolecules. The polymer was prepared via a modified variant of low-temperature bromoalkylation of urethane hard segments followed by the reaction of pendant bromoalkyl groups with thiolacetic acid in mild conditions. The extent of modification with acetylthio groups can be made as high as 0.45 mmol/g. After deprotection of acetylthio groups and reaction of the resulting thiol groups with an excess of Ellman's reagent, 0.1 nmol/cm(2) of thiol-reactive 3-carboxy-4-nitrophenyldithio groups were detected on the surface of films cast from the modified polymer. A sensitive fluorescent probe--dansyl-L-cysteine was used for the quantification of thiol-reactive groups bound to the surface. The acetylthio-modified polyurethane is sufficiently stable to withstand conditions typical for the high-temperature processing (molding, extrusion) of polyurethanes.

Immobilization of a nonsteroidal antiinflammatory drug onto commercial segmented polyurethane surface to improve haemocompatibility properties

A method has been developed in which a layer of p-aminosalicylic acid (4-amino-2-hydroxybenzoic acid) (PAS), a water soluble pharmaceutical compound of the nonsteroidal anti-inflammatory drug (NSAID) class with antiaggregant platelet activity, is covalently immobilized onto a segmented polyurethane, Biospan (SPU) surface. Thus, SPU surfaces were modified by grafting of hexamethylenediisocyanate. and the free isocyanate remaining on the SPU surface were then coupled through a condensation reaction to amine groups of p-aminosalicylic acid. The bonding of PAS from aqueous solution onto SPU surface was studied by ATR-FTIR. UV and fluorescence spectroscopy. Plateau levels of coupled PAS were reached within 1.2 microg/cm2 using PAS solution concentrations of 1mg/ ml. The surface wettability of the polymeric films measured by contact angle indicate that the introduction of the PAS turns the surface more hydrophilic (theta(water) = 43.1 +/- 2.1) relatively to the original SPU films (theta(water) = 70.3 +/- 1.9). The in vitro albumin (BSA) adsorption shows that the PAS-SPU films adsorb more BSA (250/microgmm2) than the original SPU (112 microg mm2). Thrombogenicity was assessed by measuring the thrombus formation and platelet adhesion of the SPU containing PAS relatively to nonmodified SPU surfaces. The polymeric surfaces with immobilized PAS had better nonthrombogenic characteristics as indicated by the low platelet adhesion, high adsorption of albumin relatively to fibrinogen and low thrombus formation, making them potentially good candidates for biomedical applications.

A biologically active VEGF construct in vitro: implications for bioengineering-improved prosthetic vascular grafts

Prosthetic arterial grafts are unable to develop an intact endothelial lining after implantation, predisposing them to fail. Strategies have been sought to enhance endothelialization using growth factors and cytokines. This study assessed the biologic activity of vascular endothelial growth factor (VEGF) covalently linked to bovine serum albumin (BSA). Native and modified VEGF were assayed for endothelial cell migration and proliferation. Migration assays were performed comparing the effects of 2% fetal bovine serum (FBS), 50 ng/mL, 100 ng/mL, and 200 ng/mL of native VEGF and VEGF-BSA. Proliferation assays were performed by using Alamar Blue comparing cellular growth in 1% FBS, 10% FBS, 100 ng/mL unbound VEGF, and 100 ng/mL VEGF-BSA. VEGF is a potent chemotactic agent for endothelial cells in both unbound and bound states. Native VEGF solutions (50 ng/mL, 100 ng/mL, and 200 ng/mL) stimulated 23.9 cells/high power field (HPF), 35.3 cells/HPF, and 49.1 cells/HPF (p < 0.005). VEGF-BSA solutions stimulated 25.9 cells/HPF, 39.1 cells/HPF, and 69.0 cells/HPF (p < 0.001). VEGF-BSA and native VEGF supported similar increased cellular proliferation compared with 1% FBS media (p < 0.002). Modified VEGF retains its chemotactic and proliferative properties in vitro. These findings suggest that bare prosthetic surfaces lined with VEGF bound to a "basecoat" albumin may support endothelial cell proliferation and migration and thereby offer new strategies to improve graft patency.

Bioencapsulation within synthetic polymers (Part 2): non-sol-gel protein-polymer biocomposites

Since the introduction of sol-gel bioencapsulation and the demonstration that biological function can be incorporated into, and preserved within, polymer matrices, a number of alternative polymers have been used to immobilize proteins. Various enzymes have been trapped in such diverse polymers as epoxy-amine resins, polyvinyl plastics, polyurethane foams and silicone elastomers. Together with sol-gel encapsulates, these biocomposites represent a powerful approach for immobilizing biological materials for applications as biosensors and biocatalysts, and hold promise as bioactive, fouling-resistant polymers for environmental, food and medical uses. Although still at the developmental stage, these biocomposites promise to revolutionize the whole arena of high-performance bioimmobilization.