Developing a synergistic rate-retarding polymeric implant for controlling monoclonal antibody delivery in minimally invasive glaucoma surgery

Monoclonal antibodies (mAbs) have garnered substantial attention within the field of ophthalmology and can be used to suppress scar formation after minimally invasive glaucoma surgeries. Here, by controlling mAb passive diffusion, we developed a polymeric, rate-controlling membrane reservoir loaded with poly(lactic-co-glycolic acid) microspheres to deliver mAb for several weeks. Different parameters were tested to ensure that the microspheres achieved a good quality characteristic, and our results showed that 1 %W/V emulsifier with 5 %W/V NaCl achieved mAb-loaded microspheres with the highest stability, encapsulation efficiency and minimal burst release. Then, we fabricated and compared 10 types of microporous films based on polylactic acid (PLA), polycaprolactone (PCL), and polyethylene glycol (PEG). Our results revealed distinct pore characteristics and degradation patterns in different films due to varying polymer properties, and all the polymeric film formulations showed good biocompatibility in both human trabecular meshwork cells and human conjunctival fibroblasts. Finally, the optimized microspheres were loaded into the reservoir-type polymeric implant assembled by microporous membranes with different surface coating modifications. The implant formulation, which was fabricated by 60 PCL: 40 PEG (3 %W/V) polymer with 0.1 %W/V poly(lactic-co-glycolic acid) barrier, exerted the best drug release profile that can sustained release mAb (83.6 %) for 4 weeks.

Studying the stability of polymer nanoparticles by size exclusion chromatography of radioactive polymers

The properties of nanomedicines will influence how they can deliver drugs to patients reproducibly and effectively. For conventional pharmaceutical products, Chemistry, Manufacturing and Control (CMC) documents require monitoring stability and storage conditions. For nanomedicines, studying these important considerations is hindered by a lack of appropriate methods. In this paper, we show how combining radiolabelling with size exclusion chromatography, using a method called SERP (for Size Exclusion of Radioactive Polymers), can inform on the in vitro degradation of polymer nanoparticles. Using nanoparticles composed of biodegradable poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA), we show that SERP is more sensitive than dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) to detect degradation. We also demonstrate that the properties of the polymer composition and the nature of the aqueous buffer affect nanoparticle degradation. Importantly, we show that minute changes in stability that cannot be detected by DLS and NTA impact the pharmacokinetic of nanoparticles injected in vivo. We believe that SERP might prove a valuable method to document and understand the pharmaceutical quality of polymer nanoparticles.

Novel 40 µm spot size 3050/3200 nm DFG laser versus CO2 laser for laser-assisted drug delivery

BACKGROUND AND OBJECTIVES

The use of ablative fractional lasers to enhance the delivery of topical drugs through the skin is known as laser-assisted drug delivery. Here, we compare a novel 3050/3200 nm difference frequency generation (DFG) fiber laser (spot size: 40 µm) to a commercially used CO2 laser (spot size: 120 µm). The objective is to determine whether differences in spot size and coagulation zone (CZ) thickness influence drug uptake.

MATERIALS AND METHODS

Fractional ablation was performed on ex-vivo human abdominal skin with the DFG (5 mJ) and CO2 (12 mJ) lasers to generate 680 µm deep lesions. To evaluate drug delivery, 30 kDa encapsulated fluorescent dye was topically applied to the skin and histologically analyzed at skin depths of 100, 140, 200, 400, and 600 µm. Additionally, transcutaneous permeation of encapsulated and 350 Da nonencapsulated dye was assessed using Franz Cells.

RESULTS

The DFG laser generated smaller channels (diameter: 56.5 µm) with thinner CZs (thickness: 22.4 µm) than the CO2 laser (diameter: 75.9 µm, thickness: 66.8 µm). The DFG laser treated group exhibited significantly higher encapsulated dye total fluorescence intensities after 3 h compared to the CO2 laser treated group across all skin depths (p < 0.001). Permeation of nonencapsulated dye was also higher in the DFG laser treated group vs the CO2 laser treated group after 48 h (p < 0.0001), while encapsulated dye was not detected in any group.

CONCLUSION

The DFG laser treated skin exhibited significantly higher total fluorescence uptake compared to the CO2 laser. Additionally, the smaller spot size and thinner CZ of the DFG laser could result in faster wound healing and reduced adverse effects while delivering similar or greater amount of topically applied drugs.

Silane-modified hydroxyapatite nanoparticles incorporated into polydioxanone/poly(lactide-co-caprolactone) creates a novel toughened nanocomposite with improved material properties and in vivo inflammatory responses

The interface tissue between bone and soft tissues, such as tendon and ligament (TL), is highly prone to injury. Although different biomaterials have been developed for TL regeneration, few address the challenges of the TL-bone interface. Here, we aim to develop novel hybrid nanocomposites based on poly(p-dioxanone) (PDO), poly(lactide-co-caprolactone) (LCL), and hydroxyapatite (HA) nanoparticles suitable for TL-bone interface repair. Nanocomposites, containing 3-10% of both unmodified and chemically modified hydroxyapatite (mHA) with a silane coupling agent. We then explored biocompatibility through in vitro and in vivo studies using a subcutaneous mouse model. Through different characterisation tests, we found that mHA increases tensile properties, creates rougher surfaces, and reduces crystallinity and hydrophilicity. Morphological observations indicate that mHA nanoparticles are attracted by PDO rather than LCL phase, resulting in a higher degradation rate for mHA group. We found that adding the 5% of nanoparticles gives a balance between the properties. In vitro experiments show that osteoblasts' activities are more affected by increasing the nanoparticle content compared with fibroblasts. Animal studies indicate that both HA and mHA nanoparticles (10%) can reduce the expression of pro-inflammatory cytokines after six weeks of implantation. In summary, this work highlights the potential of PDO/LCL/HA nanocomposites as an excellent biomaterial for TL-bone interface tissue engineering applications.

Nanoparticular and other carriers to deliver lactoferrin for antimicrobial, antibiofilm and bone-regenerating effects: a review

Bone and joint infections are a rare but serious problem worldwide. Lactoferrin’s antimicrobial and antibiofilm activity coupled with its bone-regenerating effects may make it suitable for improving bone and joint infection treatment. However, free lactoferrin (LF) has highly variable oral bioavailability in humans due to potential for degradation in the stomach and small intestine. It also has a short half-life in blood plasma. Therefore, encapsulating LF in nanocarriers may slow degradation in the gastrointestinal tract and enhance LF absorption, stability, permeability and oral bioavailability. This review will summarize the literature on the encapsulation of LF into liposomes, solid lipid nanoparticles, nanostructured lipid carriers, polymeric micro and nanoparticles and hydroxyapatite nanocrystals. The fabrication, characterization, advantages, disadvantages and applications of each system will be discussed and compared.

Fabrication of subunit nanovaccines by physical interaction

Vaccines can improve the quality of human life by preventing the burden of infectious diseases. Also, vaccination is becoming a powerful medication for preventing and treating tumors. Various vaccines have been developed based on the origin of the antigens. Herein, we focus on the subunit vaccines whose antigens are proteins or peptides. The advantage of subunit vaccines is safety for recipients; however, the immunogenicity of subunit antigens is relatively low. Nanoparticular delivery systems have been applied to improve the immunocompetence of subunit vaccines by targeting lymph nodes, and effectively present antigens to immune cells. Moreover, adding appropriate molecular adjuvants may strengthen the antigens to elicit immune response. In this perspective article, we first elucidate the characteristics of immunity induced by subunit nanovaccines and then summarize the strategies to fabricate subunit nanovaccines with delivering materials. Herein we highlight non-covalent interaction to fabricate nanoparticular subunit vaccines.

Bone-adhesive barrier membranes based on alendronate-functionalized poly(2-oxazoline)s

To create a novel generation of barrier membranes with bone-adhesive properties, three-component membranes were successfully developed using a solvent-free approach by combining an occlusive polyester backing layer with a bone-adhesive fibrous gelatin carrier impregnated with calcium-binding alendronate-functionalized poly(2-oxazoline)s (POx-Ale). The mechanical properties of these novel membranes were similar to other commercially available barrier membranes. In contrast, the adhesion of our membranes towards bone was by far superior (i.e. 62-fold) compared to conventional commercially available Bio-Gide® membranes. Moreover, alendronate-functionalized membranes retained their bone-adhesive properties under wet conditions in phosphate-buffered saline (PBS) solutions with and without collagenase. Finally, the in vitro degradation of the membranes was studied by monitoring their weight loss upon immersion in PBS solutions with and without collagenase. The membranes degraded in a sustained manner, which was accelerated by the presence of collagenase due to enzymatic degradation of the carrier. In conclusion, our results show that surface functionalization of barrier membranes with alendronate moieties renders them adhesive to bone. As such, the biomaterials design strategy presented herein opens up new avenues of research on bone-adhesive membranes for guided bone regeneration.

Characterization of a Sandwich PLGA-Gallic Acid-PLGA Coating on Mg Alloy ZK60 for Bioresorbable Coronary Artery Stents

Absorbable magnesium stents have become alternatives for treating restenosis owing to their better mechanical properties than those of bioabsorbable polymer stents. However, without modification, magnesium alloys cannot provide the proper degradation rate required to match the vascular reform speed. Gallic acid is a phenolic acid with attractive biological functions, including anti-inflammation, promotion of endothelial cell proliferation, and inhibition of smooth muscle cell growth. Thus, in the present work, a small-molecule eluting coating is designed using a sandwich-like configuration with a gallic acid layer enclosed between poly (d,l-lactide-co-glycolide) layers. This coating was deposited on ZK60 substrate, a magnesium alloy that is used to fabricate bioresorbable coronary artery stents. Electrochemical analysis showed that the corrosion rate of the specimen was ~2000 times lower than that of the bare counterpart. The released gallic acid molecules from sandwich coating inhibit oxidation by capturing free radicals, selectively promote the proliferation of endothelial cells, and inhibit smooth muscle cell growth. In a cell migration assay, sandwich coating delayed wound closure in smooth muscle cells. The sandwich coating not only improved the corrosion resistance but also promoted endothelialization, and it thus has great potential for the development of functional vascular stents that prevent late-stent restenosis.

How subtle differences in polymer molecular weight affect doxorubicin-loaded PLGA nanoparticles degradation and drug release

Aims: To evaluate the influence of minor differences in molecular weights of commercially available low molecular weight PLGA grades on the kinetics of doxorubicin release from the nanoparticles.Methods: Three low-molecular weight 50/50 PLGA polymers were thoroughly characterised concerning intrinsic viscosity, molecular weight (Mw), acid value, and residual monomer content. The doxorubicin-loaded nanoparticles prepared using these polymers were evaluated concerning the kinetics of drug release and hydrolytic degradation.Results: The Mw of the polymers were slightly different: 10.2, 10.3, and 4.7 kDa. The nanoparticles obtained from the polymer with Mw of 4.7 kDa exhibited considerably higher rates of drug release and polymer degradation.Conclusion: In the case of low molecular weight PLGA grades even a few kilodaltons could be important for the batch-to-batch reproducibility of the nanoformulation parameters. These results bring forward the importance of in-house characterisation of the polymers to be used for the nanoparticle preparation.

Application of statistical design to evaluate critical process parameters and optimize formulation technique of polymeric nanoparticles

In advanced medication, drug-loaded polymeric nanoparticles (NPs) appeared as a novel drug delivery system with lots of advantages over conventional medicines. Despite all the advantages, NPs do not gain popularity for manufacturing hurdles. The study focused on the formulation difficulties and implementation of statistical design to establish an effective model for manufacturing NPs. In this study, physico-chemical properties of the drug and polymer (PLGA) were incorporated to understand the mechanistic insights of nanoformulations. Primarily, the process controlling parameters were screened by Plackett-Burman design and the critical process parameters (Cpp) were further fabricated by Box-Behnken design (BBD). The TLM-PLGA-NPs (telmisartan loaded PLGA NPs) exhibited particle size, encapsulation efficiency and zeta potential of 232.4 nm, 79.21% and -9.92 mV respectively. The NPs represented drug loading of 76.31%. Korsmeyer-Peppas model (R 2 = 0.925) appeared to be the best fitted model for in vitro release kinetics of NPs. The model identified Fickian diffusion of TLM from the polymeric nanoparticles. The ANOVA results of variables indicate that BBD is a suitable model for the development of polymeric NPs. The study successfully identified and evaluated the correlation of significant parameters that were directly or indirectly influencing the formulations which deliberately produce desired nanoparticles with the help of statistical design.

Förster Resonance Energy Transfer-Based Stability Assessment of PLGA Nanoparticles in Vitro and in Vivo

The knowledge of in vitro and in vivo stability of polymeric nanoparticles is vital for the development of clinical formulations for drug delivery and cell labeling applications. Förster resonance energy transfer (FRET)-based fluorescence labeling approaches are promising tools to study nanoparticle stability under different physiological conditions. Here, we present the FRET-based stability assessment of poly(lactic-co-glycolic acid) (PLGA) nanoparticles encapsulating BODIPY-FL12 and Nile Red as the donor and acceptor, respectively. The stability of PLGA nanoparticles is studied via monitoring the variations of fluorescence emission characteristics along with colloidal characterization. Accordingly, PLGA nanoparticles are colloidally stable for more than 2 weeks when incubated in aqueous buffers in situ, whereas in vitro particle degradation starts in between 24 and 48 h, reaching a complete loss of FRET at 72 h as shown with fluorescence microscopy imaging and flow cytometry analysis. PLGA nanoparticles systemically administered to mice predominantly accumulate in the liver, in which FRET no longer takes place at time points as early as 24 h postadministration as determined by ex vivo organ imaging and flow cytometry analysis. The results of this study expand our knowledge on drug release and degradation behavior of PLGA nanoparticles under different physiological conditions, which will prove useful for the rational design of PLGA-based formulations for various applications that can be translated into clinical practice.

Exploiting PLGA-Based Biocompatible Nanoparticles for Next-Generation Tolerogenic Vaccines against Autoimmune Disease

Tolerogenic vaccines are aimed at inhibiting antigen-specific immune responses. Antigen-loaded nanoparticles (NPs) have been recently emerged as ideal tools for tolerogenic vaccination because their composition, size, and capability of loading immunomodulatory molecules can be readily exploited to induce peripheral tolerance. Among polymeric NPs, poly(lactic-co-glycolic acid) (PLGA) NPs have the advantage of currently holding approval for several applications in drug delivery, diagnostics, and other clinical uses by the Food and Drug Administration (FDA). PLGA-NPs are non-toxic and display excellent biocompatibility and biodegradability properties. Moreover, surface functionalization may improve their interaction with biological materials, thereby optimizing targeting and performance. PLGA-NPs are the most extensively studied in pre-clinical model in the field of tolerogenic vaccination. Thus, this review describes their potential applications in the treatment of autoimmune diseases.

A chemotherapeutic approach targeting the acidic tumor microenvironment: combination of a proton pump inhibitor and paclitaxel for statistically optimized nanotherapeutics

Development of statistically optimized, paclitaxel–lansoprazole, dual drug loaded PLGA nanoparticles as a promising tumor acidic microenvironment targeted chemotherapeutic approach.

Drug loaded nanoparticle coating on totally bioresorbable PLLA stents to prevent in-stent restenosis

Biodegradable polymer poly (dl-lactide) (PDLLA) has been used as drug coating material for drug-eluting stents due to its excellent biocompatibility and sustained drug release ability. However, the uniform thin layer drug eluting coating on a stent not only inhibits the blood vessel's smooth muscle cell overgrowth but also delay the endotheliation process which is often associated with the occurrence of acute thrombosis. Therefore, in this study, we developed a novel coating method using PDLLA nanoparticles (NPs) as a coating to overcome this issue. The average 300 nm sized sirolimus-loaded PDLLA nanoparticles were prepared by a conventional emulsion solvent evaporation method. A low temperature plasma polymerization technology to graft hydrophilic polymers on to poly (l-lactide) stent was used to increase the surface coating efficiency of nanoparticles on the stent. Results showed that sirolimus-loaded nanoparticles can be successfully coated on to the stents with sustained drug release properties. In vitro cell culture study showed the drug loaded nanoparticle coating effectively inhibited the proliferation of smooth muscle cells while still allowed a faster proliferation of endothelial cells, suggesting that the new NP coated bioresorbable stents have the potential to reduce both the occurrence of in-stent restenosis and acute thrombosis. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 88-95, 2018.

Application of Bioactive Quercetin in Oncotherapy: From Nutrition to Nanomedicine

Phytochemicals as dietary constituents are being explored for their cancer preventive properties. Quercetin is a major constituent of various dietary products and recently its anti-cancer potential has been extensively explored, revealing its anti-proliferative effect on different cancer cell lines, both in vitro and in vivo. Quercetin is known to have modulatory effects on cell apoptosis, migration and growth via various signaling pathways. Though, quercetin possesses great medicinal value, its applications as a therapeutic drug are limited. Problems like low oral bioavailability and poor aqueous solubility make quercetin an unreliable candidate for therapeutic purposes. Additionally, the rapid gastrointestinal digestion of quercetin is also a major barrier for its clinical translation. Hence, to overcome these disadvantages quercetin-based nanoformulations are being considered in recent times. Nanoformulations of quercetin have shown promising results in its uptake by the epithelial system as well as enhanced delivery to the target site. Herein we have tried to summarize various methods utilized for nanofabrication of quercetin formulations and for stable and sustained delivery of quercetin. We have also highlighted the various desirable measures for its use as a promising onco-therapeutic agent.