Antibacterial activity of SPIONs versus ferrous and ferric ions under aerobic and anaerobic conditions: a preliminary mechanism study

Antimicrobial activity of metal-based nanoparticles: a mini-review

The resistance of pathogenic microorganisms to antibiotics is one of the main problems of world health. Of particular concern are multidrug-resistant (MDR) bacteria. Infections caused by these microorganisms affect the appearance of acute or chronic diseases. In this regard, modern technologies, such as nanomaterials (NMs), especially promising nanoparticles (NPs), can possess antimicrobial properties or improve the effectiveness and delivery of known antibiotics. Their diversity and characteristics, combined with surface functionalization, enable multivalent interactions with microbial biomolecules. This article presents an overview of the most current research on replacing antibiotics with NPs, including the prospects and risks involved.

Salvianolic acid A alleviates H2O2-induced endothelial oxidative injury via miR-204-5p

Oxidative stress induced endothelial dysfunction plays a particularly important role in promoting the development of cardiovascular diseases (CVDs). Salvianolic acid A (SalA) is a water-soluble component of traditional Chinese medicine Salvia miltiorrhiza Bunge with anti-oxidant potency. This study aims to explore the regulatory effect of SalA on oxidative injury using an in vitro model of H2O2-induced injury in human umbilical vein endothelial cells (HUVECs). In the study, we determined cell viability, the activities of Lactate dehydrogenase (LDH) and Superoxide dismutase (SOD), cell proliferation rate and intracellular reactive oxygen species (ROS). Flow cytometry was used to detect cell apoptosis. Western-blotting was used to evaluate the expression of cell senescence, apoptosis, autophagy and pyroptosis protein factors. The expression level of miRNA was determined by qRT-PCR. Compared with H2O2-induced HUVECs, SalA promoted cell viability and cell proliferation rate; decreased LDH and ROS levels; and increased SOD activity. SalA also significantly attenuated endothelial senescence, inhibited cell apoptosis, reversed the increase of LC3 II/I ratio and NLRP3 accumulation. Furthermore, miR-204-5p was regulated by SalA. Importantly, miR-204-5p inhibitor had similar effect to that of SalA on H2O2-induced HUVECs. Our results indicated that SalA could alleviate H2O2-induced oxidative injury by downregulating miR-204-5p in HUVECs.

Exploring the potential and safety of quantum dots in allergy diagnostics

Biomedical investigations in nanotherapeutics and nanomedicine have recently intensified in pursuit of new therapies with improved efficacy. Quantum dots (QDs) are promising nanomaterials that possess a wide array of advantageous properties, including electronic properties, optical properties, and engineered biocompatibility under physiological conditions. Due to these characteristics, QDs are mainly used for biomedical labeling and theranostic (therapeutic-diagnostic) agents. QDs can be functionalized with ligands to facilitate their interaction with the immune system, specific IgE, and effector cell receptors. However, undesirable side effects such as hypersensitivity and toxicity may occur, requiring further assessment. This review systematically summarizes the potential uses of QDs in the allergy field. An overview of the definition and development of QDs is provided, along with the applications of QDs in allergy studies, including the detection of allergen-specific IgE (sIgE), food allergens, and sIgE in cellular tests. The potential treatment of allergies with QDs is also described, highlighting the toxicity and biocompatibility of these nanodevices. Finally, we discuss the current findings on the immunotoxicity of QDs. Several favorable points regarding the use of QDs for allergy diagnosis and treatment are noted.

Pharmacotechnical aspects of a stable probiotic formulation toward multidrug-resistance antibacterial activity: design and quality control

As a well-known group of the probiotic family, the Lactobacillus has increasingly contributed to hindering the growth of pathogens, particularly resistant species, in the last decades. Since antibiotic resistance has become a severe problem in global healthcare systems and considerably increased the mortality and morbidity rate in infectious diseases, we aimed to obtain a new stable formulation of Lactobacillus to overcome resistant infections. For this purpose, we designed various gel formulations containing Lactobacillus rhamnosus (L. rhamnosus) as an active pharmaceutical ingredient (API) in a water base and oil base gel, evaluated the probiotic stability in formulation to obtain an optimum formulation, and finally, investigated the antibacterial activities of that against two common hospital-associated multidrug-resistant pathogens, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE). Furthermore, the pharmaceutical aspects of the optimum formulation, including stability, homogeneity, spreadability, pH value, conductivity, and rheological behavior, were assessed.The results indicated that the optimum formulation based on glycerol exhibited desirable pharmaceutical properties, including long-term stability, a perfect level of homogeneity, an acceptable range of spreadability with pseudo-plastic thixotropic behavior, and a promising antibacterial potential against MRSA and VRE. Our findings indicate that this novel probiotic formulation could be an excellent candidate to cope with antibiotic-resistant species, representing a hopeful treatment potential for topical applications, particularly in incurable infections. However, further in vivo studies seem warranted to evaluate their bactericidal activity against multi-drug resistant microorganisms.

X-ray and UV Irradiation-Induced Reactive Oxygen Species Mediated Antibacterial Activity in Fe and Pt Nanoparticle-Decorated Si-Doped TiCaCON Films

Bone implants with biocompatibility and the ability to biomineralize and suppress infection are in high demand. The occurrence of early infections after implant placement often leads to repeated surgical treatment due to the ineffectiveness of antibiotic therapy. Therefore, an extremely attractive solution to this problem would be the ability to initiate bacterial protection of the implant by an external influence. Here, we present a proof-of-concept study based on the generation of reactive oxygen species (ROS) by the implant surface in response to X-ray irradiation, including through a layer of 3 mm adipose tissue, providing bactericidal protection. The effect of UV and X-ray irradiation of the implant surface on the ROS formation and the associated bactericidal activity was compared. The focus of our study was light-sensitive Si-doped TiCaCON films decorated with Fe and Pt nanoparticles (NPs) with photoinduced antibacterial activity mediated by ROS. In the visible and infrared range of 300-1600 nm, the films absorb more than 60% of the incident light. The high light absorption capacity of TiO2/TiC and TiO2/TiN heterostructures was demonstrated by density functional theory calculations. After short-term (5-10 s) low-dose X-ray irradiation, the films generated significantly more ROS than after UV illumination for 1 h. The Fe/TiCaCON-Si films showed enhanced biomineralization capacity, superior cytocompatibility, and excellent antibacterial activity against multidrug-resistant hospital Escherichia coli U20 and K261 strains and methicillin-resistant Staphylococcus aureus MW2 strain. Our study clearly demonstrates that oxidized Fe NPs are a promising alternative to the widely used Ag NPs in antibacterial coatings, and X-rays can potentially be used in ROS-regulating therapy to suppress inflammation in case of postimplant complications.

Bringing resistance modulation to methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) strains using a quaternary ammonium compound coupled with zinc oxide nanoparticles

Nowadays, there are concerns about the inadequacy of new antimicrobials and the rise of antimicrobial resistance. Hence, novel antibacterial agents need to be discovered. In this respect, the use of nanoparticles (NPs) seems promising. Zinc oxide nanoparticles (ZnONPs) are functional and inexpensive NPs that possess antimicrobial characteristics, stability, microbial selectivity, and an easy manufacturing procedure. Imidazolium is one of the quaternary ammonium compounds (QACs) frequently employed as antimicrobial materials in industrial and clinical fields. The present study successfully employed imidazolium to couple with ZnONPs to improve their antimicrobial properties. The antimicrobial activities of ZnONPs doped with imidazolium (IM@ZnONPs) compared to ZnONPs and zinc (Zn) ions against some pathogen microorganism species including Streptococcus aureus (S. aureus), Enterococcus faecalis (E. faecalis), methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and Candida albicans (C. albicans) were evaluated by the microdilution method. The minimum inhibitory concentration (MIC) results revealed that the antimicrobial activities of Zn ions, ZnONPs, and IM@ZnONPs were concentration-dependent. Moreover, we found that the nanoparticulate forms of Zn had considerably stronger antibacterial activities, particularly against VRE and MRSA, compared to Zn ions which failed to restrain the microbial strains at the tested microdilutions of this experiment (MIC: ≥512 µg/mL). Interestingly, the incorporation of imidazolium into ZnONPs resulted in significant inhibition of microbial growth in antimicrobial-resistant pathogens at low concentrations (MIC: 32 µg/mL) and effectively improved the monodispersity of the final coated NPs in terms of size and morphology. To sum up, IM@ZnONPs can be a favorable substitute for conventional antimicrobial agents to combat antimicrobial resistance in many fields, including pharmaceuticals, dental materials, and cosmetic products.

Biosynthesis and Antimicrobial Evaluation of Zinc Oxide Nanoparticles Using Chlorella vulgaris Biomass against Multidrug-Resistant Pathogens

The rampant increase in antibiotic resistance has created a global barrier to the treatment of multidrug-resistant infections. Biogenic synthesis of nanomaterials is a novel approach to producing nanostructures with biological resources. Algae are known to be clean, nontoxic, cost-beneficial, and environmentally acceptable. Chlorella vulgaris is a popular microalga for its broad applications in food, supplements, pharmaceuticals, and cosmetics. In this study, we used Chlorella vulgaris biomass lyophilized powder as our green resource for the biosynthesis ZnONPs. Chlorella vulgaris culture was harvested at the end of the logarithmic phase, and the biomass was lyophilized. ZnONPs were synthesized using lyophilized biomass and 20 mM zinc acetate dihydrate at a temperature of 70 °C and continuous stirring in a water bath overnight. At the end of the reaction, UV-Vis absorption of colloidal suspension proved the synthesis of ZnONPs. The physicochemical characteristics of nanoparticles were analyzed using FTIR, DLS, TEM, and XRD. Based on FTIR spectra. The antibacterial activity of green synthesized nanostructures was evaluated against methicillin-resistant staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE). The synthesized ZnONPs have oxygen-containing groups on the surface that show the synthesized nanoparticles' stabilization. The Zeta potential was -27.4 mV, and the mean particle size was measured as 33.4 nanometers. Biogenic ZnONPs produced in this method have a notable size distribution and excellent surface energy, which can have vast applications like antimicrobial potential in pharmaceuticals as topical forms. Additionally, in order to evaluate the antimicrobial activity of ZnO nanoparticles, we used MRSA and VRE strains and the results showed the anti-MRSA activity at 400 and 625 μg mL^-1, respectively. Thus, these biogenic ZnO nanoparticles revealed a substantial antibacterial effect against multidrug-resistant pathogens, associated with several serious systemic infections, and have the potential as an antimicrobial agent for further study.

Metal Nanoparticles to Combat Candida albicans Infections: An Update

Candidiasis is an opportunistic mycosis with high annual incidence worldwide. In these infections, Candida albicans is the chief pathogen owing to its multiple virulence factors. C. albicans infections are usually treated with azoles, polyenes and echinocandins. However, these antifungals may have limitations regarding toxicity, relapse of infections, high cost, and emergence of antifungal resistance. Thus, the development of nanocarrier systems, such as metal nanoparticles, has been widely investigated. Metal nanoparticles are particulate dispersions or solid particles 10-100 nm in size, with unique physical and chemical properties that make them useful in biomedical applications. In this review, we focus on the activity of silver, gold, and iron nanoparticles against C. albicans. We discuss the use of metal nanoparticles as delivery vehicles for antifungal drugs or natural compounds to increase their biocompatibility and effectiveness. Promisingly, most of these nanoparticles exhibit potential antifungal activity through multi-target mechanisms in C. albicans cells and biofilms, which can minimize the emergence of antifungal resistance. The cytotoxicity of metal nanoparticles is a concern, and adjustments in synthesis approaches or coating techniques have been addressed to overcome these limitations, with great emphasis on green synthesis.

Synthesis, Characterization, and Antibacterial Activity of Biocompatible Aluminium Complexes with N-(2-Hydroxy-5-methyl benzyl)phenylalanine

New antibacterial ligand H3hmbpa-5 (N-(2-hydroxy-5-methyl benzyl)phenylalanine) and its aluminium complexes Al(OPri)(Hhmbpa-5), Al(H2hmbpa-5)(Hhmbpa-5), and Al(H2hmbpa-5)3 were synthesized in excellent yield in a stoichiometric ratio of 1 : 1, 1 : 2, and 1 : 3 (Al(OPri)3 : ligand), based on an idea of biological activity of the phenylalanine and its substituted N-aryl derivatives and Al (III) derivatives. The complexes were characterized by FT-IR, 1H, 13C NMR, UV-visible, and elemental analysis. An inhibition zone test was used for the evaluation of the antibacterial test. The results show that the ligand and aluminium complexes have superior antibacterial activity against Pseudomonas aeruginosa (MTCC-424), Streptococcus aureus (MTCC-103), Klebsiella pneumoniae (MTCC-3389), and Klebsiella pneumoniae (MTCC-109).

Mechanisms of Metallic Nanomaterials to Induce an Antibacterial Effect

Pathogenic microorganisms, including bacteria, are becoming resistant to most existing drugs, which increases the failure of pharmacologic treatment. Therefore, new nanomaterials were studied to spearhead improvement against the same resistant pathogenic bacteria. This has increased the mortality in the world population, principally in under-developed countries. Moreover, recently there has been research to find new drug formulations to kill the most dangerous microorganisms, such as bacteria cells which should avoid the spread of disease. Therefore, lately, investigations have been focusing on nanomaterials because they can exhibit the capacity to show an antibacterial effect. These studies have been trying oriented in their ability to produce an improvement to get antibacterial damage against the same pathogenic bacteria resistance. However, there are many problems with the use of nanoparticles. One of them is understanding how they act against bacteria, "their mechanism(s) action" to induce reduction or even kill the bacterial strains. Therefore, it is essential to understand the specific mechanism(s) of each nanomaterial used to observe the interaction between bacteria cells and nanoparticles. In addition, since nanoparticles can be functionalized with different antibacterial drugs, it is necessary to consider and distinguish the antibacterial activity of the nanoparticles from the antibacterial activity of the drugs to avoid confusion about how the nanoparticles work. Knowledge of these differences can help better understand the applications of the primary nanoparticles (i.e., Ag, Au, CuO, ZnO, and TiO², among others) described in detail in this review which are toxic against various bacterial strains.

Cascade System for Biomineralization in Cement: Project, Construction and Operationalization to Enhance Building Energy Efficiency

Anthropogenic and natural actions cause internal and external fractures in concrete. To recover these structures, bio-concretes have been developed with bacteria of the genus Bacillus. These microorganisms consume calcium lactate, synthesize calcium carbonate and biomineralize CaCO3 crystals within the structures of concrete. The aim of the present study was to construct equipment, denominated “Cascade System for Biomineralization in Cement” (CSBC), to determine the limiting velocity of the biomineralization of CaCO3. The construction of the equipment took into consideration chemical and biochemical phenomena responsible for biomineralization. Parts made with 3D printing and a circuit with Arduino UNO R3 board were used in the assembly of the system. The prototype proved to be stable and can be considered a promising tool for future application in research of the regeneration of reinforced concreted in a practical, fast and economical way, especially to the energy sector.

The potential of surface nano-engineering in characteristics of cobalt-based nanoparticles and biointerface interaction with prokaryotic and human cells

Cobalt-based nanoparticles (CBNPs) have recently received great attention in biomedical studies; however, the possible biotoxicity of these nanoparticles (NPs) has remained a foremost concern that should be addressed. As surface functionalization is one of the helpful proposed solutions, we aimed to apply Lipoamino acids (LAAs) as a coating agent to improve biocompatibility. To this purpose, cobalt oxide, cobalt ferrite, and iron oxide nanoparticles (IONs) were synthesized with and without 2-amino-hexadecanoic acid coating to assess the impacts of LAA coating on characteristics and biocompatibility of CBNPs in human cells and compare with IONs, a widely used magnetic NPs in biomedicine. Antibacterial activities of NPs were evaluated against four Gram-negative and Gram-positive bacteria species to assess their biointerface interaction with prokaryotic cells. In addition, the antibacterial activities of synthesized NPs were compared to silver NPs, one of the widely used antimicrobial NPs and standard antibiotics (ampicillin). The structural characteristics properties of NPs were analyzed using TEM, FE-SEM, EDS, FTIR, XRD, and VSM. These NPs exhibited sphere-like to polygon-like morphology with desirable mean size. CBNPs displayed dose-dependent cytotoxicity and antimicrobial activities against human cell lines and all tested microbial species, as well as more cytotoxicity and bacterial inhibition compared to IONs. Besides, the results revealed that LAA coating could significantly improve the biocompatibility and antibacterial activity of NPs while impacting magnetic properties. To sum up, it seems that surface functionalization could provide more potent tools for bioapplications with improving biocompatibility and bacterial inhibition of CBNPs, though; further studies are needed in this regard.

TiO2-Modified Magnetic Nanoparticles (Fe3O4) with Antibacterial Properties

This paper presents the synthesis and characteristics of Fe₃O₄/C/TiO₂ hybrid magnetic nanomaterials with antibacterial properties. The materials used were obtained using a microwave-assisted two-stage precipitation method. In the first stage, magnetite nanoparticles (Fe₃O₄) were prepared with the precipitation method, during which an additional glucose layer was placed on them. Next, the surface of Fe₃O₄ nanoparticles was covered by TiO₂. It was observed that the addition of carbon and titanium dioxide caused a decrease in the average size of magnetite crystallites from 15.6 to 9.2 nm. Materials with varying contents of anatase phase were obtained. They were characterized in terms of phase composition, crystallite size, specific surface area, surface charge and the kinds of function groups on the surface. The results show a successful method of synthesizing hybrid magnetic nanoparticles, stable in a solution, with antibacterial properties under direct solar light irradiation. Compared to classical materials based on TiO₂ and used for water disinfection, the obtained photocatalytic nanomaterials have magnetic properties. Owing to this fact, they can be easily removed from water once their activity under direct irradiance in a given process has completed.

Bioactive Graphene Quantum Dots Based Polymer Composite for Biomedical Applications

Today, nanomedicine seeks to develop new polymer composites to overcome current problems in diagnosing and treating common diseases, especially cancer. To achieve this goal, research on polymer composites has expanded so that, in recent years, interdisciplinary collaborations between scientists have been expanding day by day. The synthesis and applications of bioactive GQD-based polymer composites have been investigated in medicine and biomedicine. Bioactive GQD-based polymer composites have a special role as drug delivery carriers. Bioactive GQDs are one of the newcomers to the list of carbon-based nanomaterials. In addition, the antibacterial and anti-diabetic potentials of bioactive GQDs are already known. Due to their highly specific surface properties, π-π aggregation, and hydrophobic interactions, bioactive GQD-based polymer composites have a high drug loading capacity, and, in case of proper correction, can be used as an excellent option for the release of anticancer drugs, gene carriers, biosensors, bioimaging, antibacterial applications, cell culture, and tissue engineering. In this paper, we summarize recent advances in using bioactive GQD-based polymer composites in drug delivery, gene delivery, thermal therapy, thermodynamic therapy, bioimaging, tissue engineering, bioactive GQD synthesis, and GQD green resuscitation, in addition to examining GQD-based polymer composites.

Analysis of the Relationship Between Periampullary Diverticulum and Recurrent Bile Duct Stones After Endoscopy on Magnetic Resonance Imaging of Magnetic Nanoparticles

The objective of this work was to investigate the effect of magnetic resonance cholangiopancreatography (MRCP) based on super-paramagnetic iron oxide nanoparticles (SPIONs) on the recurrence diagnosis of periampullary diverticulum (PAD) and bile duct stone (BDS), so as to provide a scientific research basis for the recidivation factors of bile duct stones in clinic. Patients with PAD diagnosed in hospital from July 2019 to March 2021 (who had undergone endoscopic gallstone surgery) were selected for study in this work. They were rolled into two groups, the parapapillary group (123 cases) and the cholangiopancreatic duct directly opening in the diverticulum group (97 cases), according to the clinical classification. Then, 100 patients without PAD who had undergone bile duct node therapy were selected as the control group. The recidivation of BDS, serological index, and biliary pressure index before and after treatment were compared. The relationship between PAD and recidivation of bile duct stones was analyzed. The results showed that the average particle size, hydration kinetic particle size, effective time, and duration of polyethylene glycol (PEG)/polyethyleneimine (PEI)/poly aspartic acid-super-paramagnetic iron oxide nanoparticles(PASP-SPIONs) were better than PEG/PEI-SPIONs and SPIONs. The recidivation rate of BDS in Groups R and X was remarkably higher than the rate in control group (P < 0.05). Before treatment, common bile duct pressure in the control group was lower obviously than that in Groups R and X (P < 0.05). After treatment, the indexes including total bilirubin, direct bilirubin, and alkaline phosphatase in control group were lower than those in Groups R and X (P < 0.05). The incidence of complications in Groups R and X was much higher than in contrast to the control group (P < 0.05). Therefore, PEG/PEI/PASP-SPIONs had good contrast effect and could be used as magnetic resonance imaging contrast agent. Complications such as common bile duct pressure and infection were increased by PAD, which may be the main factor for the recidivation of BDS.

Antibacterial approaches in tissue engineering using metal ions and nanoparticles: From mechanisms to applications

Bacterial infection of implanted scaffolds may have fatal consequences and, in combination with the emergence of multidrug bacterial resistance, the development of advanced antibacterial biomaterials and constructs is of great interest. Since decades ago, metals and their ions had been used to minimize bacterial infection risk and, more recently, metal-based nanomaterials, with improved antimicrobial properties, have been advocated as a novel and tunable alternative. A comprehensive review is provided on how metal ions and ion nanoparticles have the potential to decrease or eliminate unwanted bacteria. Antibacterial mechanisms such as oxidative stress induction, ion release and disruption of biomolecules are currently well accepted. However, the exact antimicrobial mechanisms of the discussed metal compounds remain poorly understood. The combination of different metal ions and surface decorations of nanoparticles will lead to synergistic effects and improved microbial killing, and allow to mitigate potential side effects to the host. Starting with a general overview of antibacterial mechanisms, we subsequently focus on specific metal ions such as silver, zinc, copper, iron and gold, and outline their distinct modes of action. Finally, we discuss the use of these metal ions and nanoparticles in tissue engineering to prevent implant failure.

A Review on Health Benefits of Malva sylvestris L. Nutritional Compounds for Metabolites, Antioxidants, and Anti-Inflammatory, Anticancer, and Antimicrobial Applications

The utilization of medicinal plants and their derivatives in treating illnesses is more appropriately recognized as herbal remedy than traditional medicine. For centuries, medicinal herbs have been used for the treatment of diseases in many countries. Malva sylvestris L. is a kind of mallow derived from Malvaceae species and is recognized as common mallow. This amazing plant has antimicrobial, hepatoprotective, anti-inflammatory, and antioxidant properties and is considered as one of the most promising herbal medicinal species. This plant's traditional use in treating many diseases and preparing pharmaceutical compounds can show us how to know in depth the plant origin of drugs used to produce antibiotics and other therapeutic agents.

Trends in Natural Nutrients for Oxidative Stress and Cell Senescence

Due to the increase in the aged population and increased life expectancy, the underlying mechanisms involved in the aging process and cell senescence and the ways for modulating these processes in age-related diseases become important. One of the main mechanisms involved in aging and cell senescence, especially in the diseases related to aging, is the oxidative stress process and the following inflammation. Hence, the effects of antioxidants are highlighted in the literature due to their beneficial impacts on inhibiting telomere shortening or DNA damage and other processes related to aging and cell senescence in age-related diseases. Dietary components, foods, and dietary patterns rich in antioxidants can modulate the aging process and delay the progression of some chronic diseases such as cardiovascular diseases, diabetes, and Alzheimer's disease. Foods high in polyphenols, vitamin C, or carotenoids, olive oil, seeds, nuts, legumes, dietary supplements such as CoQ10, and some other dietary factors are the most important nutritional sources that have high antioxidant contents which can positively affect cell senescence and disease progression. Plant dietary patterns including Mediterranean diets can also inhibit telomere shortening following oxidative damages, and this can delay cell aging and senescence in age-related diseases. Further, olive oil can inhibit protein aggregation in Alzheimer's disease. It can be concluded that nutrition can delay the process of cell senescence in age-related diseases via inhibiting oxidative and inflammatory pathways. However, more studies are needed to better clarify the underlying mechanisms of nutrition and dietary components on cell senescence, aging, and disease progression, especially those related to age.

Bioinorganic Synthesis of Polyrhodanine Stabilized Fe3O4/Graphene Oxide in Microbial Supernatant Media for Anticancer and Antibacterial Applications

Polyrhodanines have been broadly utilized in diverse fields due to their attractive features. The effect of polyrhodanine- (PR-) based materials on human cells can be considered a controversial matter, while many contradictions exist. In this study, we focused on the synthesis of polyrhodanine/Fe3O4 modified by graphene oxide and the effect of kombucha (Ko) supernatant on results. The general structure of synthetic compounds was determined in detail through Fourier-transform infrared spectroscopy (FT-IR). Also, obtained compounds were morphologically, magnetically, and chemically characterized using scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), energy dispersive X-ray (EDX) analysis. The antibacterial effects of all synthesized nanomaterials were done according to CLSI against four infamous pathogens. Also, the cytotoxic effects of the synthesized compounds on the human liver cancer cell line (Hep-G2) were assessed by MTT assay. Our results showed that Go/Fe has the highest average inhibitory effect against Escherichia coli and Pseudomonas aeruginosa, and this compound possesses the least antimicrobial effect on Staphylococcus aureus. Considering the viability percent of cells in the PR/GO/Fe3O4 compound and comparing it with GO/Fe3O4, it can be understood that the toxic effects of polyrhodanine can diminish the metabolic activity of cells at higher concentrations (mostly more than 50 µg/mL), and PR/Fe3O4/Ko exhibited some promotive effects on cell growth, which enhanced the viability percent to more than 100%. Similarly, the cell viability percent of PR/GO/Fe3O4/KO compared to PR/GO/Fe3O4 is much higher, which can be attributed to the presence of kombucha in the compound. Consequently, based on the results, it can be concluded that this novel polyrhodanine-based nanocompound can act as drug carriers due to their low toxic effects and may open a new window on the antibacterial agents.

An updated overview on metal nanoparticles toxicity

Although thousands of different nanoparticles (NPs) have been identified and synthesized to date, well-defined, consistent guidelines to control their exposure and evaluate their potential toxicity have yet to be fully established. As potential applications of nanotechnology in numerous fields multiply, there is an increased awareness of the issue of nanomaterials' toxicity among scientists and producers managing them. An updated inventory of customer products containing NPs estimates that they currently number over 5.000; ten years ago, they were one fifth of this. More often than not, products bear no information regarding the presence of NPs in the indicated list of ingredients or components. Consumers are therefore largely unaware of the extent to which nanomaterials have entered our lives, let alone their potential risks. Moreover, the lack of certainties with regard to the safe use of NPs is curbing their applications in the biomedical field, especially in the diagnosis and treatment of cancer, where they are performing outstandingly but are not yet being exploited as much as they could. The production of radical oxygen species is a predominant mechanism leading to metal NPs-driven carcinogenesis. The release of particularly reactive metal ions capable of crossing cell membranes has also been implicated in NPs toxicity. In this review we discuss the origin, behavior and biological toxicity of different metal NPs with the aim of rationalizing related health hazards and calling attention to toxicological concerns involved in their increasingly widespread use.

Exploring the bone sparing effects of postbiotics in the post-menopausal rat model

Background

Post-menopausal osteoporosis is a concern of health organizations, and current treatments do not seem enough. Postbiotics as bioactive compounds produced by probiotics may be an attractive alternative for bone health. In this study, we prepared, formulated, and compared the effects of cell lysate and supernatant of five native probiotic strains (Lactobacillus acidophilus, Lactobacillus reuteri, Lactobacillus casei, Bifidobacterium longum, and Bacillus coagulans) in ovariectomized (OVX) rats.

Methods

The probiotic strains were isolated, and their cell-free supernatants and biomasses as postbiotics were extracted and formulated using standard microbial processes. The Sprague-Dawley rats were fed by 1 × 10⁹ CFU/ml/day postbiotic preparations for 4 weeks immediately after ovariectomy. Dual-energy X-ray absorptiometry (DEXA) scans were accomplished to evaluate femur, spine, and tibia BMD. The serum biochemical markers [calcium, phosphorus, and alkaline phosphatase] were assessed.

Results

Postbiotics could considerably improve the global and femur area in OVX rats. In the case of global bone mineral density (BMD), Lactobacillus casei lysate and supernatant, Bacillus coagulans lysate and supernatant, lysate of Bifidobacterium longum and Lactobacillus acidophilus, and Lactobacillus reuteri supernatant significantly increased BMD. We found Bacillus coagulans supernatant meaningfully enriched tibia BMD.

Conclusion

Postbiotic could ameliorate bone loss resulting from estrogen deficiency. Also, the effects of postbiotics on different bone sites are strain-dependent. More clinical studies need to explore the optimal administrative dose and duration of the specific postbiotics in protecting bone loss.