Signatures of the hydrogen bonding in the infrared bands of water

The isosbestic point in the Raman spectra of the hydration shell

Isosbestic point is often observed in a series of spectra, but their interpretation is still controversial, such as whether the continuum model can produce an isosbestic point. In order to answer this question, the Raman spectra of hydration shell with continuous distribution structure in different ionic aqueous solutions were separated by Raman ratio spectra, and an isosbestic point was successfully observed. Our experimental results show that the continuum model can indeed produce the isosbestic point. In order to deepen the understanding of the isosbestic point, we calculate the first moment of the Raman spectra and conduct molecular dynamics (MD) simulations. Both experimental and theoretical findings indicate that elevated temperatures lead to increased disorder among water molecules within the hydration shell.

Unveiling the Failure Mechanism of Zn Anodes in Zinc Trifluorosulfonate Electrolyte: The Role of Micelle-like Structures

Zinc trifluorosulfonate [Zn(OTf)2] is considered as the most suitable zinc salt for aqueous Zn-ion batteries (AZIBs) but cannot support the long-term cycling of the Zn anode. Here, we reveal the micelle-like structure of the Zn(OTf)2 electrolyte and reunderstand the failing mechanism of the Zn anode. Since the solvated Zn2+ possesses a positive charge, it can spontaneously attract OTf- with the hydrophilic group of -SO3 and the hydrophobic group of -CF3 via electrostatic interaction and form a "micelle-like" structure, which is responsible for the poor desolvation kinetics and dendrite growth. To address these issues, an antimicelle-like structure is designed by using ethylene glycol monomethyl ether (EGME) as a cosolvent for highly reversible AZIBs. The modified electrolyte shows lower dissociation ability to Zn(OTf)2 and higher coordination tendency with Zn2+ compared to the Zn(OTf)2 electrolyte, resulting in the unique solvation structure of Zn2+(H2O)1.2(OTf-)2(EGME)2.8, which significantly reduces the charge of micelle, damages the micelle-like structure, and boosts the desolvation kinetics. Moreover, the reduction of EGME and OTf- can form a robust dual-layered SEI with high Zn2+ ion conductivity. Consequently, the Zn/Cu asymmetric coin cell using ZT-EGME can work at a high rate and a capacity of 50 mA cm-2 and 5 mA h cm-2 for more than 120 cycles, while its counterparts using ZT can barely work. Moreover, a 505.1 mA h pouch cell with practical parameters including a lean electrolyte supply of 15 mL A h-1 and an N/P ratio of ∼3.5 can work for 50 cycles.

Panthenol Additives with Multiple Coordination Sites Induce Uniform Zinc Deposition and Inhibited Side Reactions for High Performance Aqueous Zinc Metal Battery

Application of aqueous zinc metal batteries (AZMBs) in large-scale new energy systems (NESs) is challenging owing to the growth of dendrites and frequent side reactions. Here, this study proposes the use of Panthenol (PB) as an electrolyte additive in AZMBs to achieve highly reversible zinc plating/stripping processes and suppressed side reactions. The PB structure is rich in polar groups, which led to the formation of a strong hydrogen bonding network of PB-H2O, while the PB molecule also builds a multi-coordination solvated structure, which inhibits water activity and reduces side reactions. Simultaneously, PB and OTF- decomposition, in situ formation of SEI layer with stable organic-inorganic hybrid ZnF2-ZnS interphase on Zn anode electrode, can inhibit water penetration into Zn and homogenize the Zn2+ plating. The effect of the thickness of the SEI layer on the deposition of Zn ions in the battery is also investigated. Hence, this comprehensive regulation strategy contributes to a long cycle life of 2300 h for Zn//Zn cells assembled with electrolytes containing PB additives. And the assembled Zn//NH4V4O10 pouch cells with homemade modules exhibit stable cycling performance and high capacity retention. Therefore, the proposed electrolyte modification strategy provides new ideas for AZMBs and other metal batteries.

Impact of Rare Sugar D-Allulose on Hardening of Starch Gels during Refrigerated Storage

The rare sugar D-allulose (Alu), with ca. 10% calories of sucrose (Suc), is a promising alternative sugar that can be used to improve the quality of starch gels in storage. The effects of Alu (compared to Suc) on the hardening and microstructural and molecular order of amylopectin-rich (glutinous rice (GR) and corn amylopectin (CAP)) and amylose-rich (corn (C)) starch gels were investigated. Alu and Suc both suppressed hardening in C gels, while Alu but not Suc was effective in GR and CAP gels. SEM results showed that Alu-containing GR and CAP maintained a relatively large pore size compared to Suc-containing gels. The deconvolution of FTIR spectra revealed that Alu-containing GR and CAP gels had lower ratios of intermolecular hydrogen bonds and higher ratios of loose hydrogen bonds than Suc-containing gels. For amylose-rich C gels, on the other hand, such tendencies were not observed. The influence of Alu on amylopectin-rich gels could be because Alu reduced the ratio of intermolecular hydrogen bonds, which might be involved in amylopectin recrystallization, and increased that of loose hydrogen bonds. The results suggest that Alu is more effective than Suc in inhibiting the hardening of amylopectin-rich starch gels during refrigerated storage.

Molecular dynamics simulations reliably identify vibrational modes in far-IR spectra of phospholipids

The properties of self-assembled phospholipid membranes are of essential importance in biochemistry and physical chemistry, providing a platform for many cellular life functions. Far-infrared (far-IR) vibrational spectroscopy, on the other hand, is a highly information-rich method to characterize intermolecular interactions and collective behaviour of lipids that can help explain, e.g., chain packing, thermodynamic phase behaviour, and sequestration. However, reliable interpretation of the far-IR spectra is still lacking. Here we present a molecular dynamics (MD) based approach to simulate vibrational modes of individual lipids and in an ensemble. The results are a good match to synchrotron far-IR measurements and enable identification of the molecular motions corresponding to each vibrational mode, thus allowing the correct interpretation of membrane spectra with high accuracy and resolving the longstanding ambiguities in the literature in this regard. Our results demonstrate the feasibility of using MD simulations for interpreting far-IR spectra broadly, opening new avenues for practical use of this powerful method.

Modeling of the Hydrogen Bond-Induced Frequency Shifts of the HOH and HOD Bending Modes of Water

The intramolecular bending mode of water is a possible useful probe of the hydrogen-bond situations in aqueous systems, but the behavior of its frequency and intensity should be further elucidated for better understanding on its nature and, hence, for its better utilization as a probe. Here, an analysis toward this goal is conducted by doing theoretical calculations on molecular clusters of normal isotopic and deuterated species of water and examining the correlations among the vibrational, structural, and electrostatic properties. It is shown that electrostatic interactions, particularly both of the in-plane components of the electric field along the OH bond and perpendicular to it, play a major role in controlling the hydrogen bond-induced shifts of the force constant, but additional factors, including the intermolecular structural and/or charge-transfer properties, are also important. Models of the hydrogen bond-induced shifts of the force constant are presented in a form that may be combined with classical molecular dynamics. With regard to the infrared intensity changes, it is shown on the basis of the electron density analysis that the intermolecular charge flux and polarization effect play an important role, depending on the angular characteristics of the hydrogen bond.

Water Structure in the First Layers on TiO2: A Key Factor for Boosting Solar-Driven Water-Splitting Performances

The water hydrogen-bonded network is strongly perturbed in the first layers in contact with the semiconductor surface. Even though this aspect influences the outer-sphere electron transfer, it was not recognized that it is a crucial factor impacting the solar-driven water-splitting performances. To fill this gap, we have selected two TiO2 anatase samples (with and without B-doping), and by extensive experimental and computational investigations, we have demonstrated that the remarkable 5-fold increase in water-splitting photoactivity of the B-doped sample cannot be ascribed to effects typically associated to enhanced photocatalytic properties, such as band gap, heterojunctions, crystal facets, and other aspects. Studying these samples by combining FTIR measurements under controlled humidity with first-principles simulations sheds light on the role and nature of the first-layer water structure in contact with the photocatalyst surfaces. It turns out that the doping hampers the percolation of tetrahedrally coordinated water molecules while enhancing the population of topological H-bond defects forming approximately linear H-bonded chains. This work unveils how doping the semiconductor surface affects the local electric field, determining the water splitting rate by influencing the H-bond topologies in the first water layers. This evidence opens new prospects for designing efficient photocatalysts for water splitting.

Vibrational circular dichroism spectra of proline in water at different pH values

Recording VCD spectra of aqueous solution poses a particular challenge as water is a strong infrared absorber. Likewise, the computational analysis of VCD spectra by means of DFT-based spectral calculations requires the consideration of explicit solvent molecules, thus posing an even greater challenge. Several studies suggested that by modeling the solvent environment with a few water molecules in a micro-solvation approach would be sufficient to describe experimental spectra. For example, using proline at different pH values, we herein show that a change in the relative spatial orientation of a single water molecule in five-fold solvated structures strongly affects the computed VCD spectral signatures and that Boltzmann-weighted spectra do not correctly reproduce the experiment. We thus explored an approach based on molecular dynamics and subsequent DFT-calculations, in which we considered 30 water molecules (about 1.5 solvation shells). Once again, it was found that the Boltzmann-weighted spectra obtained on the basis of several hundred structures did not correctly reproduce experimental signatures, and a simple averaging scheme resulted in well-matching spectra with comparable bandwidths. The rationale behind the procedure was that sampling the configurational space of the solvent molecules is as equally important as the conformational sampling of the solute. For conformationally more flexible molecules, it is assumed that a much larger set of structures will have to be computed in order to properly sample the conformational space of both solute and solvent.

Ubiquity of the Micrometer-Thick Interface along a Quartz-Water Boundary

Water-rock interactions determine how the geochemical cycles revolve from the Earth's surface to the deep interior (large T-P intervals). The underlying mechanisms interweave the fluxes of matter, time, and reactivity between fluid phases and solids. The deformation processes of crustal rocks are also known to be significantly affected by the presence or absence of water, typically with the hydrolytic weakening of quartz, olivine, and other silicate minerals. In fact, fluid-rock interactions mechanistically unfold along their interfaces, developing over a certain thickness within the two phases. Diffraction-limited mid-infrared microspectroscopy was employed to monitor the thermodynamic characteristics of liquid water along a quartz boundary. The hyperspectral Fourier transform infrared data set displayed a very strong distance-dependent signature for water over a 1 ± 0.5 μm thickness, while quartz appears unmodified, which is consistent with recent studies. This unexpected thick interface is tested against the geometry of the inclusion, the chemistry of the occluded liquid (especially pH), and the thermal conditions ranging from room temperature to 155 °C. Throughout this range of physicochemical conditions, the micrometer-thick interface is characterized by a ubiquitous, significant shift in the Gibbs free energy of water inside the interfacial layer. This conclusion suggests that the interface-imprinting phenomenon driving this microthick layer has thermodynamic roots that give rise to specific properties along the quartz-water interface. This finding questions the systematic use of the bulk phase data sets to evaluate how water-rock interactions progress in porous media.

Vapor Pressure and Enthalpy of Vaporization of Guanidinium Methanesulfonate as a Phase Change Material for Thermal Energy Storage

This paper reports the vapor pressure and enthalpy of vaporization for a promising phase change material (PCM) guanidinium methanesulfonate ([Gdm][OMs]), which is a typical guanidinium organomonosulfonate that displays a lamellar crystalline architecture. [Gdm][OMs] was purified by recrystallization. The elemental analysis and infrared spectrum of [Gdm][OMs] confirmed the purity and composition. Differential scanning calorimetry (DSC) also confirmed its high purity and showed a sharp and symmetrical endothermic melting peak with a melting point (Tm) of 207.6 °C and a specific latent heat of fusion of 183.0 J g-1. Thermogravimetric analysis (TGA) reveals its thermal stability over a wide temperature range, and yet three thermal events at higher temperatures of 351 °C, 447 °C, and 649 °C were associated with vaporization or decomposition. The vapor pressure was measured using the isothermogravimetric method from 220 °C to 300 °C. The Antoine equation was used to describe the temperature dependence of its vapor pressure, and the substance-dependent Antoine constants were obtained by non-linear regression. The enthalpy of vaporization (ΔvapH) was derived from the linear regression of the slopes associated with the linear temperature dependence of the rate of weight loss per unit area of vaporization. Hence, the temperature dependence of vapor pressures ln Pvap (Pa) = 10.99 - 344.58/(T (K) - 493.64) over the temperature range from 493.15 K to 573.15 K and the enthalpy of vaporization ΔvapH = 157.10 ± 20.10 kJ mol-1 at the arithmetic mean temperature of 240 °C were obtained from isothermogravimetric measurements using the Antoine equation and the Clausius-Clapeyron equation, respectively. The flammability test indicates that [Gdm][OMs] is non-flammable. Hence, [Gdm][OMs] enjoys very low volatility, high enthalpy of vaporization, and non-flammability in addition to its known advantages. This work thus offers data support, methodologies, and insights for the application of [Gdm][OMs] and other organic salts as PCMs in thermal energy storage and beyond.

Undecanoic Acid and L-Phenylalanine in Vermiculite: Detection, Characterization, and UV Degradation Studies for Biosignature Identification on Mars

Solar radiation that arrives on the surface of Mars interacts with organic molecules present in the soil. The radiation can degrade or transform the organic matter and make the search for biosignatures on the planet's surface difficult. Therefore, samples to be analyzed by instruments on board Mars probes for molecular content should be selectively chosen to have the highest organic preservation content. To support the identification of organic molecules on Mars, the behavior under UV irradiation of two organic compounds, undecanoic acid and L-phenylalanine, in the presence of vermiculite and two chloride salts, NaCl and MgCl, was studied. The degradation of the molecule's bands was monitored through IR spectroscopy. Our results show that, while vermiculite acts as a photoprotective mineral with L-phenylalanine, it catalyzes the photodegradation of undecanoic acid molecules. On the other hand, both chloride salts studied decreased the degradation of both organic species acting as photoprotectors. While these results do not allow us to conclude on the preservation capabilities of vermiculite, they show that places where chloride salts are present could be good candidates for in situ analytic experiments on Mars due to their organic preservation capacity under UV radiation.

Ultraviolet Resonant Raman Scattering of Electrolyte Solutions

Saltwater stands as the most prevalent liquid on Earth. Consequently, substantial interest has been directed toward its characterization, both as an independent system and as a solvent for complex structures such as biomacromolecules. In the last few decades, special emphasis was placed on the investigation of the hydration properties of ions for the fundamental role they play in numerous chemical processes. In this study, we employed multi-wavelength Raman spectroscopy to examine the hydration shell surrounding bromide ions in solutions of simple electrolytes, specifically lithium bromide, potassium bromide, and cesium bromide, at two different concentrations. Cation-induced differences among electrolytes were observed in connection to their tendency to form ion pairs. An increased sensitivity to reveal the structure of the first hydration shell was evidenced when employing ultraviolet excitation in the 228-266 nm range, under resonance conditions with the charge transfer transition to the solvent peaked at about 200 nm. Other than a significant increase in the Raman cross-section for the OH stretching band when shifting from pure water to the solution, a larger enhancement for the Raman signal of the H-O-H bending mode over the stretching vibration was observed. Thus, the bending band plays a crucial role in monitoring the H-bond structure of water around the anions related to the charge distribution within the first hydration shell of anions, being an effective probe of hydration phenomena.

Interlayer Confined Water Enabled Pseudocapacitive Sodium-Ion Storage in Nonaqueous Electrolyte

Electrochemical capacitors have faced the limitations of low energy density for decades, owing to the low capacity of electric double-layer capacitance (EDLC)-type positive electrodes. In this work, we reveal the functions of interlayer confined water in iron vanadate (FeV3O8.7·nH2O) for sodium-ion storage in nonaqueous electrolyte. Using an electrochemical quartz crystal microbalance, in situ Raman, and ex situ X-ray diffraction and X-ray photoelectron spectroscopy, we demonstrate that both nonfaradaic (surficial EDLC) and faradaic (pseudocapacitance-dominated Na+ intercalation) processes are involved in the charge storages. The interlayer confined water is able to accelerate the fast Na+ intercalations and is highly stable (without the removal of water or co-intercalation of [Na-diglyme]+) in the nonaqueous environment. Furthermore, coupling the pseudocapacitive FeV3O8.7·nH2O with EDLC-type activated carbon (FeVO-AC) as the positive electrode brings comprehensive enhancements, displaying the enlarged compaction density of ∼2 times, specific capacity of ∼1.5 times, and volumetric capacity of ∼3 times compared to the AC electrode. Furthermore, the as-assembled hybrid sodium-ion capacitor, consisting of an FeVO-AC positive electrode and a mesocarbon microbeads negative electrode, shows a high energy density of 108 Wh kg-1 at 108 W kg-1 and 15.3 Wh kg-1 at 8.3 kW kg-1. Our results offer an emerging route for improving both specific and volumetric energy densities of electrochemical capacitors.

Comprehensive Understandings of Hydrogen Bond Chemistry in Aqueous Batteries

Aqueous batteries are emerging as highly promising contenders for large-scale grid energy storage because of uncomplicated assembly, exceptional safety, and cost-effectiveness. The unique aqueous electrolyte with a rich hydrogen bond (HB) environment inevitably has a significant impact on the electrode materials and electrochemical processes. While numerous reviews have focused on the materials design and assembly of aqueous batteries, the utilization of HB chemistry is overlooked. Herein, instead of merely compiling recent advancements, this review presents a comprehensive summary and analysis of the profound implication exerted by HB on all components of the aqueous batteries. Intricate links between the novel HB chemistry and various aqueous batteries are ingeniously constructed within the critical aspects, such as self-discharge, structural stability of electrode materials, pulverization, solvation structures, charge carrier diffusion, corrosion reactions, pH sensitivity, water splitting, polysulfides shuttle, and H2 S evolution. By adopting a vantage point that encompasses material design, binder and separator functionalization, electrolyte regulation, and HB optimization, a critical examination of the key factors that impede electrochemical performance in diverse aqueous batteries is conducted. Finally, insights are rendered properly based on HB chemistry, with the aim of propelling the advancement of state-of-the-art aqueous batteries.

Correlation between Hydration States and Self-assembly Structures of Phospholipid and Surfactant Studied by Terahertz Spectroscopy

Phospholipids and surfactants form membranes and other self-assembled structures in water. However, it is not fully understood how the surrounding water (hydration water) is involved in their structure formation. In this paper, I summarize the results of our investigation of the long-range hydration state of phospholipids and surfactants at their surfaces by means of terahertz spectroscopy. By observing the collective rotational dynamics of water in the picosecond time scale, this technique allows us to observe not only the water directly bound to the solute, but also the weakly affected water outside of it. For example, PC phospholipids inhibit water dynamics over long distances, whereas PE phospholipids make water more mobile than bulk water. The causes of this difference in hydration and how it is involved in the structural formation of the membrane are reviewed.

Hydrogen-bonded structures and low temperature transitions of the confined water in subnano channels

The interfacial and confined water have long been attractive objects due to their crucial roles in biological, geological processes, etc. In this paper, we investigate the hydrogen-bonded structures of water and their low temperature transitions in the subnano channels of AlPO4-11 for the first time on the basis of infrared spectroscopy. The number of the adsorbed water molecules is estimated to be 8.45 per channel in one unit cell by thermogravimetric analysis. It is found that the confined water molecules are involved in saturated and unsaturated coordination with different hydrogen bond strengths at ambient temperature. The former refers to ice-like four-coordinated water and the latter includes liquid-like structures, Al-coordinated and relatively free water molecules. Unique coordination between water molecules and framework Al sites is responsible for the ice-like structures in the channels above the ice melting point. The appearance of liquid-like structures is closely related to the strong channel confinement, which does not allow the formation of extensive tetrahedral hydrogen-bonded configuration. As temperature decreases, a structural transformation of confined water happens in the channels of AlPO4-11. Isolated small water oligomers and two new components with stronger hydrogen bonds, such as low-density amorphous ice-like structures and a kind of low-density liquid-like structures are preferred. Our results provide important insights into the structural organizations and thermal-dynamic behaviors of confined water in extreme narrow channels.

Chaotropic Electrolyte Enabling Wide-Temperature Metal-Free Battery

Metal-free aqueous batteries are promising candidates for grid-scale energy storage owing to their inherent safety, low cost, and cost effectiveness. The battery chemistry based on fast NH4+ diffusion kinetics avoids unfavorable generation of inactive metallic byproducts. However, their practical applications have been impeded by electrolyte instability and the intrinsic drawbacks of current electrodes. Herein, we propose an aqueous ammonium-iodine battery by using a chaotropic electrolyte, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) anode, and iodine composite (I2@CC) cathode. Experimental investigations and theoretical calculations reveal that the chaotropic electrolyte not only enhances electrolyte stability through modulating the H-bond structure but also facilitates the formation of a hydrophobic cationic sieve (HCS) on the anode, which ensures the electrolyte/electrode stability and high reversibility of the anode. Additionally, the Cl--containing electrolyte can support the consecutive I+/I0 reaction on the cathode by forming [IClx]1-x interhalogen. The as-assembled aqueous ammonium-iodine batteries (AIBs) based on NH4+ accommodation at the anode and I+/I0 redox reaction at the cathode can deliver superior electrochemical performance at room temperature and low temperature (-20 °C). This study provides a strategic insight into developing metal-free aqueous batteries with electrolyte modulation.

Reconstructing Hydrogen Bond Network Enables High Voltage Aqueous Zinc-Ion Supercapacitors

High-voltage aqueous rechargeable energy storage devices with safety and high specific energy are hopeful candidates for the future energy storage system. However, the electrochemical stability window of aqueous electrolytes is a great challenge. Herein, inspired by density functional theory (DFT), polyethylene glycol (PEG) can interact strongly with water molecules, effectively reconstructing the hydrogen bond network. In addition, N, N-dimethylformamide (DMF) can coordinate with Zn2+ , assisting in the rapid desolvation of Zn2+ and stable plating/stripping process. Remarkably, by introducing PEG400 and DMF as co-solvents into the electrolyte, a wide electrochemical window of 4.27 V can be achieved. The shift in spectra indicate the transformation in the number and strength of hydrogen bonds, verifying the reconstruction of hydrogen bond network, which can largely inhibit the activity of water molecule, according well with the molecular dynamics simulations (MD) and online electrochemical mass spectroscopy (OEMS). Based on this electrolyte, symmetric Zn cells survived up to 5000 h at 1 mA cm-2 , and high voltage aqueous zinc ion supercapacitors assembled with Zn anode and activated carbon cathode achieved 800 cycles at 0.1 A g-1 . This work provides a feasible approach for constructing high-voltage alkali metal ion supercapacitors through reconstruction strategy of hydrogen bond network.

Spectroscopic characterization of calcium phosphate precipitated under human eye conditions: An in vitro study

Calcification is a well-known process of calcium phosphate mineralization observed in intraocular lenses. Despite the many works conducted in this field, there is no strict explanation of the mechanisms of this process. In order to better understand the phenomenon, i.e., the mechanisms and structural conditions that promote calcification, any research observations should be conducted under conditions that best reflect those of the human eye. Taking into account the specific anatomy and physicochemical conditions of the human eye, the problem under discussion becomes difficult to solve in vitro. In the present study, calcium phosphates formed under conditions similar to those in the human eye were characterized using SEM/EDS and infrared spectroscopy. Conducted study showed the formation of white spherical precipitates, which are unstable when extracted from solution. Such precipitates were characteristic of solutions containing 1.5-3.0 mM² of solutes. Elemental analysis showed a Ca/P ratio of 1.64-1.65, which is similar to the ratio for hydroxyapatite (1.67). Chemical structure analysis revealed the presence of broad bending and stretching bands at 475-830 cm^-1 and 880-1250 cm^-1, respectively, which are characteristic of PO₄^3- groups in apatite calcium phosphates. In further analysis involving numerical fitting the bands corresponding to apatitic PO₄^3- and indicating the presence of calcium phosphates hydration were found. The results allow the selection of immersion media for further studies involving the incubation of hydrogel intraocular lenses.

Infrared Spectra in the 1000-100 cm-1 Region Combined with 4000-3000 cm-1 Region to Evaluate the States of Water

In this study, we evaluated the state of water by performing infrared (IR) spectroscopic analysis in the 4000-100 cm-1 region. The effects of ions on the structure of water molecules were investigated by analyzing specific IR bands of salt solutions in the 1000-100 cm-1 region. Chloride solutions of Li, Na, K, Cs, Ba, and Ca were prepared at different concentrations, and their IR spectra were recorded by the attenuated total reflection method. The isosbestic point was observed in the 1000-100 cm-1 region, and the position was related to the ratio of the Stokes radius and effective ionic radius of each ion. Two bands were identified at around 660 and 400 cm-1 by curve fitting, and the intensity ratio increased linearly with a decrease in water activity. Thus, this demonstrates the potential of the 1000-100 cm-1 region as a marker for the evaluation of water structure subjected to ions. Moreover, it is possible to evaluate different states of water simultaneously by combining this with the band in the 4000-3000 cm-1 region. These results successfully demonstrate the effectiveness of the spectra in the 1000-100 cm-1 region to evaluate the state of water in ionic solutions.

Contrasting Changes in Strongly and Weakly Bound Hydration Water of a Protein upon Denaturation

Water is considered integral for the stabilization and function of proteins, which has recently attracted significant attention. However, the microscopic aspects of water ranging up to the second hydration shell, including strongly and weakly bound water at the sub-nanometer scale, are not yet well understood. Here, we combined terahertz spectroscopy, thermal measurements, and infrared spectroscopy to clarify how the strongly and weakly bound hydration water changes upon protein denaturation. With denaturation, that is, the exposure of hydrophobic groups in water and entanglement of hydrophilic groups, the number of strongly bound hydration water decreased, while the number of weakly bound hydration water increased. Even though the constraint of water due to hydrophobic hydration is weak, it extends to the second hydration shell as it is caused by the strengthening of hydrogen bonds between water molecules, which is likely the key microscopic mechanism for the destabilization of the native state due to hydration.

Label-free mid-infrared photothermal live-cell imaging beyond video rate

Advancement in mid-infrared (MIR) technology has led to promising biomedical applications of MIR spectroscopy, such as liquid biopsy or breath diagnosis. On the contrary, MIR microscopy has been rarely used for live biological samples in an aqueous environment due to the lack of spatial resolution and the large water absorption background. Recently, mid-infrared photothermal (MIP) imaging has proven to be applicable to 2D and 3D single-cell imaging with high spatial resolution inherited from visible light. However, the maximum measurement rate has been limited to several frames s^-1, limiting its range of use. Here, we develop a significantly improved wide-field MIP quantitative phase microscope with two orders-of-magnitude higher signal-to-noise ratio than previous MIP imaging techniques and demonstrate live-cell imaging beyond video rate. We first derive optimal system design by numerically simulating thermal conduction following the photothermal effect. Then, we develop the designed system with a homemade nanosecond MIR optical parametric oscillator and a high full-well-capacity image sensor. Our high-speed and high-spatial-resolution MIR microscope has great potential to become a new tool for life science, in particular for live-cell analysis.

Manifestation of hydration of Na+ and Cl- ions in the IR spectra of NaCl aqueous solutions in the range of 2750-4000 cm-1

This work is aimed at the study at studying the influence of the interaction of solvate shells on the profiles of the IR spectra of sodium chloride solutions in the 2750-4000 cm^-1 range. The IR spectra of distilled water and sodium chloride solutions were obtained with the limit (0.356 g per 100 g of water) and 50 % of the limit (0.178 g per 100 g of water) concentrations at a temperature of 21˚. Theoretical methods based on the use of the DFT approach with the XLYP exchange-correlation potential are used to calculate the profiles of the IR spectra of clusters containing 9 water molecules per one NaCl molecule at the limit concentrations of the solution. In the case when the cluster contained a NaCl molecule, the spectra were calculated for interacting and non-interacting solvate shells in which the number of H₂O molecules varied from 3 to 6. The expansion of the experimental band profile on a basis containing the profiles of the theoretical bands made it possible to study the features of NaCl hydration with a change in the concentration of solutions. It was found that the IR spectrum band is formed mainly by interacting Na⁺ and Cl^- solvation shells, each containing 4 H₂O molecules, while the ninth H₂O molecule provides the bond between the solvated ions. As the salt concentration increases, the contribution of the solvation shells to the band profile increases too. The agreement reached in the positions and profiles of experimental and theoretical water bands at different solution concentrations substantiates the adequacy of the theoretical description of NaCl hydration. Theoretical studies explained the effect of a decrease in the band width, an increase in the peak intensity, and a shift of its maximum toward higher wavenumbers with increasing solution concentration.

Comprehensive H2 O Molecules Regulation via Deep Eutectic Solvents for Ultra-Stable Zinc Metal Anode

The corrosion, parasitic reactions, and aggravated dendrite growth severely restrict development of aqueous Zn metal batteries. Here, we report a novel strategy to break the hydrogen bond network between water molecules and construct the Zn(TFSI)₂ -sulfolane-H₂ O deep eutectic solvents. This strategy cuts off the transfer of protons/hydroxides and inhibits the activity of H₂ O, as reflected in a much lower freezing point (<-80 °C), a significantly larger electrochemical stable window (>3 V), and suppressed evaporative water from electrolytes. Stable Zn plating/stripping for over 9600 h was obtained. Based on experimental characterizations and theoretical simulations, it has been proved that sulfolane can effectively regulate solvation shell and simultaneously build the multifunctional Zn-electrolyte interface. Moreover, the multi-layer homemade modular cell and 1.32 Ah pouch cell further confirm its prospect for practical application.

Engineering Rich Active Sites and Efficient Water Dissociation for Ni-Doped MoS2/CoS2 Hierarchical Structures toward Excellent Alkaline Hydrogen Evolution

Besides improving charge transfer, there are two key factors, such as increasing active sites and promoting water dissociation, to be deeply investigated to realize high-performance MoS₂-based electrocatalysts in alkaline hydrogen evolution reaction (HER). Herein, we have demonstrated the synergistic engineering to realize rich unsaturated sulfur atoms and activated O-H bonds toward the water for Ni-doped MoS₂/CoS₂ hierarchical structures by an approach to Ni doping coupled with in situ sulfurizing for excellent alkaline HER. In this work, the Ni-doped atoms are evolved into Ni(OH)₂ during alkaline HER. Interestingly, the extra unsaturated sulfur atoms will be modulated into MoS₂ nanosheets by breaking Ni-S bonds during the formation of Ni(OH)₂. On the other hand, the higher the mass of the Ni precursor (m_Ni) for the fabrication of our samples, the more Ni(OH)₂ is evolved, indicating a stronger ability for water dissociation of our samples during alkaline HER. Our results further reveal that regulating m_Ni is crucial to the HER activity of the as-synthesized samples. By regulating m_Ni to 0.300 g, a balance between increasing active sites and promoting water dissociation is achieved for the Ni-doped MoS₂/CoS₂ samples to boost alkaline HER. Consequently, the optimal samples present the highest HER activity among all counterparts, accompanied by reliable long-term stability. This work will promise important applications in the field of electrocatalytic hydrogen evolution in alkaline environments.

Exploring Heterogeneous Dynamical Environment around an Ensemble of Aβ42 Peptide Monomer Conformations

Exploring the conformational properties of amyloid β (Aβ) peptides and the role of solvent (water) in guiding the dynamical environment at their interfaces is crucial for microscopic understanding of Aβ misfolding, which is involved in causing the most common neurodegenerative disorder, i.e., Alzheimer's disease. While numerous studies in the past have emphasized examining the conformational states of Aβ peptides, the role of water has not received much attention. Here, we have performed all-atom molecular dynamics simulations of several full-length Aβ₄₂ peptide monomers with different initial configurations. Our efforts are directed toward probing the origin of the heterogeneous dynamics of water around various segments of the Aβ peptide, identified as the two terminal segments (N-term and C-term) and the two hydrophobic segments (hp1 and hp2), along with the central turn region interconnecting hp1 and hp2. Our results revealed that water hydrating hp1, hp2, and turn (nonterminal segments) and C-term segments exhibit nonuniformly restricted translational as well as rotational motions. The degree of such restriction has been found to be correlated with the hydrogen bond relaxation time scales at the interface. Importantly, it is revealed that the water molecules around hp1 and, to some extent, around hp2, form relatively rigid hydration layers, compared to that around the other segments. Such rigid hydration layers arise due to relatively more solid-like caging motions resulting in relatively lesser hydration entropy. As hp1 and hp2 have been demonstrated to play a central role in Aβ aggregation, we believe that distinct water dynamics in the vicinity of these two segments, as outlined in this study, can provide vital information in understanding the early stages of the onset of the aggregation process of such peptides at higher concentration that can further aid toward advances in AD therapeutics.

Molecular Fingerprinting of the Omicron Variant Genome of SARS-CoV-2 by SERS Spectroscopy

The continuing accumulation of mutations in the RNA genome of the SARS-CoV-2 virus generates an endless succession of highly contagious variants that cause concern around the world due to their antibody resistance and the failure of current diagnostic techniques to detect them in a timely manner. Raman spectroscopy represents a promising alternative to variants detection and recognition techniques, thanks to its ability to provide a characteristic spectral fingerprint of the biological samples examined under all circumstances. In this work we exploit the surface-enhanced Raman scattering (SERS) properties of a silver dendrite layer to explore, for the first time to our knowledge, the distinctive features of the Omicron variant genome. We obtain a complex spectral signal of the Omicron variant genome where the fingerprints of nucleobases in nucleosides are clearly unveiled and assigned in detail. Furthermore, the fractal SERS layer offers the presence of confined spatial regions in which the analyte remains trapped under hydration conditions. This opens up the prospects for a prompt spectral identification of the genome in its physiological habitat and for a study on its activity and variability.

Correlated studies of photoluminescence, vibrational spectroscopy and mass spectrometry concerning the pantoprazole sodium photodegradation

In this work, new optical evidences concerning the changes induced of the UV light on pantoprazole sodium (PS), in solid state and as aqueous solution, are reported by UV-VIS spectroscopy, photoluminescence (PL), Raman scattering and FTIR spectroscopy. New evidences concerning the products of the PS photodegradation pathways are reported by the correlated studies of thermogravimetry and mass spectrometry. The influence of the excipients and alkaline medium on the PS photodegradation is also studied. New aspects regarding the chemical mechanism of the PS photodegradation in the presence of the water vapor and oxygen form air and the alkaline medium are shown. Our results confirm that the PS photodegradation induced of the water vapors and oxygen from air leads to the generation of 5-difluoromethoxy-3H-benzimidazole-2-thione sodium, 5-difluoromethoxy-3H-benzimidazole sodium, 2-thiol methyl-3, 4-dimethoxypyridine and 2-hydroxymethyl-3, 4-dimethoxypyridine, while in the alkaline medium, compounds of the type of the 2-oxymethyl-3,4-dimethoxypyridine sodium salts are resulted.

High-temperature and high-pressure plastic phase of ice at the boundary of liquid water and ice VII

Simultaneous high-temperature and high-pressure studies reveal phase transformation of bulk liquid water to an ice-VII-like structure having an eight coordination. It was demonstrated through this numerical study that the observed high-temperature and high-pressure phase of water obtained upon shock compression and equilibration has high rotational diffusion and thereby the hydrogen dynamics of these crystal structures are significantly complex compared with ice VII. The current work provides new characterization methods for the numerically observed plastic crystal phase of ice at the boundary of the liquid water and ice VII phases in which the molecules have a defined lattice position but rotate freely. It is anticipated that the present work will provide important data and guide new theoretical and experimental investigations in the search for plastic crystal phases of water. The power spectra plots of bulk liquid water subjected to different temperature and pressure conditions have also been presented in this numerical study, demonstrating significant differences between these high-temperature and high-pressure shock-equilibrated phases and those of pure ice VII at 10 GPa and liquid water at ambient temperature and pressure, as well as at elevated pressures and temperatures.

Dynamic Heterogeneity at the Interface of an Intrinsically Disordered Peptide

It is believed that water around an intrinsically disordered protein or peptide (IDP) in an aqueous environment plays an important role in guiding its conformational properties and aggregation behavior. However, despite its importance, only a handful of studies exploring the correlation between the conformational motions of an IDP and the microscopic properties of water at its surface are reported. Attempts have been made in this work to study the dynamic properties of water present in the vicinity of α-synuclein, an IDP associated with Parkinson's disease (PD). Room temperature molecular dynamics (MD) simulations of eight α-synuclein_1-95 peptides with a wide range of initial conformations have been carried out in aqueous media. The calculations revealed that due to solid-like caging motions, the translational and rotational mobility of water molecules near the surfaces of the peptide repeat unit segments R1 to R7 are significantly restricted. A small degree of dynamic heterogeneity in the hydration environment around the repeat units has been observed with water near the hydrophobic R6 unit exhibiting relatively more restricted diffusivity. The time scales involving the overall structural relaxations of peptide-water and water-water hydrogen bonds near the peptide have been found to be correlated with the time scale of diffusion of the interfacial water molecules. We believe that the relatively more hindered dynamic environment near R6 can help create water-mediated contacts centered around R6 between peptide monomers at a higher concentration, thereby enhancing the early stages of peptide aggregation.

Co-Solvent Electrolyte Engineering for Stable Anode-Free Zinc Metal Batteries

Anode-free metal batteries can in principle offer higher energy density, but this requires them to have extraordinary Coulombic efficiency (>99.7%). Although Zn-based metal batteries are promising for stationary storage, the parasitic side reactions make anode-free batteries difficult to achieve in practice. In this work, a salting-in-effect-induced hybrid electrolyte is proposed as an effective strategy that enables both a highly reversible Zn anode and good stability and compatibility toward various cathodes. The as-prepared electrolyte can also work well under a wide temperature range (i.e., from -20 to 50 °C). It is demonstrated that in the presence of propylene carbonate, triflate anions are involved in the Zn²⁺ solvation sheath structure, even at a low salt concentration (2.14 M). The unique solvation structure results in the reduction of anions, thus forming a hydrophobic solid electrolyte interphase. The waterproof interphase along with the decreased water activity in the hybrid electrolyte effectively prevents side reactions, thus ensuring a stable Zn anode with an unprecedented Coulombic efficiency (99.93% over 500 cycles at 1 mA cm^-2). More importantly, we design an anode-free Zn metal battery that exhibits excellent cycling stability (80% capacity retention after 275 cycles at 0.5 mA cm^-2). This work provides a universal strategy to design co-solvent electrolytes for anode-free Zn metal batteries.

Excipients Do Regulate Phase Separation in Lysozyme and Thus Also Its Hydration

While the liquid-liquid phase separation (LLPS) process in proteins has been studied in great detail, it has not been widely explored how the associated protein hydration changes during the process and how crucial its role is in the process itself. In this contribution, we experimentally explore the alteration of lysozyme hydration during its LLPS process using attenuated total reflection (ATR)-FTIR spectroscopy in the THz frequency region (1.5-21 THz). Additionally, we explore the role of excipients (l-arginine, sucrose, bovine albumin (BSA), and ubiquitin (Ubi)) in regulating the process and found that, while sucrose stabilizes the LLPS, BSA inhibits it. The effect of Arg in the LLPS is subtle, and that of Ubi is concentration dependent. We made a detailed analysis of the hydration profile of Lys in the presence of these excipients and observe that a change in hydration in terms of H-bond making/breaking is a definite signature regulating the process.

Seeking Solvation: Exploring the Role of Protein Hydration in Silk Gelation

The mechanism by which arthropods (e.g., spiders and many insects) can produce silk fibres from an aqueous protein (fibroin) solution has remained elusive, despite much scientific investigation. In this work, we used several techniques to explore the role of a hydration shell bound to the fibroin in native silk feedstock (NSF) from Bombyx mori silkworms. Small angle X-ray and dynamic light scattering (SAXS and DLS) revealed a coil size (radius of gyration or hydrodynamic radius) around 12 nm, providing considerable scope for hydration. Aggregation in dilute aqueous solution was observed above 65 °C, matching the gelation temperature of more concentrated solutions and suggesting that the strength of interaction with the solvent (i.e., water) was the dominant factor. Infrared (IR) spectroscopy indicated decreasing hydration as the temperature was raised, with similar changes in hydration following gelation by freezing or heating. It was found that the solubility of fibroin in water or aqueous salt solutions could be described well by a relatively simple thermodynamic model for the stability of the protein hydration shell, which suggests that the affected water is enthalpically favoured but entropically penalised, due to its reduced (vibrational or translational) dynamics. Moreover, while the majority of this investigation used fibroin from B. mori, comparisons with published work on silk proteins from other silkworms and spiders, globular proteins and peptide model systems suggest that our findings may be of much wider significance.

Investigating Membrane‐Mediated Antimicrobial Peptide Interactions with Synchrotron Radiation Far‐Infrared Spectroscopy

Synchrotron radiation‐based Fourier transform infrared spectroscopy enables access to vibrational information from mid over far infrared to even terahertz domains. This information may prove critical for the elucidation of fundamental bio‐molecular phenomena including folding‐mediated innate host defence mechanisms. Antimicrobial peptides (AMPs) represent one of such phenomena. These are major effector molecules of the innate immune system, which favour attack on microbial membranes. AMPs recognise and bind to the membranes whereupon they assemble into pores or channels destabilising the membranes leading to cell death. However, specific molecular interactions responsible for antimicrobial activities have yet to be fully understood. Herein we probe such interactions by assessing molecular specific variations in the near‐THz 400–40 cm⁻¹ range for defined helical AMP templates in reconstituted phospholipid membranes. In particular, we show that a temperature‐dependent spectroscopic analysis, supported by 2D correlative tools, provides direct evidence for the membrane‐induced and folding‐mediated activity of AMPs. The far‐FTIR study offers a direct and information‐rich probe of membrane‐related antimicrobial interactions.

Dynamical Manifestations of Supercooling in Amyloid Hydration

The effect of extreme temperature on amyloidogenic species remains sparsely explored. In a recent study (J. Phys. Chem. Lett., 2019, 10, (10)), we employed exhaustive molecular dynamics simulations to explore the cold thermal response of a putative small amyloid oligomer and to elicit the role of solvent modulation. Herein, we investigate the dynamical response of the hydration waters of the oligomer within the supercooled states. Using NMR-based formalism, we delineate the entropic response in terms of the side-chain conformational entropy that corroborates the weakening of the hydrophobic core with lowering of temperature. The translational dynamics of the protein and hydration waters reveal the coupling of protein dynamical fluctuations with solvent dynamics under supercooled conditions. Probing the translational motion as a space-time correlation indicates glassy dynamics exhibited by hydration waters in the supercooled regime. Caging of the water molecules with lowering of temperature and the resultant hopping dynamics are reflected in the longer β-relaxation timescales of translational motion. Furthermore, we utilized mode-coupling theory (MCT) and derived the ideal glass transition temperature from translational and rotational dynamics, around ∼196 and 209 K, respectively. Interestingly, rotational motion in the supercooled regime deviates from the MCT law, exhibits Arrhenius motion, and marks a fragile-to-strong crossover at 227 K. The low-frequency vibrational modes also coincide with the dynamical transition. This exposition lends dynamical insights into the hydration coupling of an amyloid aggregate under cryogenic conditions.

Addressable graphene encapsulation of wet specimens on a chip for optical, electron, infrared and X-ray based spectromicroscopy studies

Label-free spectromicroscopy methods offer the capability to examine complex cellular phenomena. Electron and X-ray based spectromicroscopy methods, though powerful, have been hard to implement with hydrated objects due to the vacuum incompatibility of the samples and due to the parasitic signals from (or drastic attenuation by) the liquid matrix surrounding the biological object of interest. Similarly, for many techniques that operate at ambient pressure, such as Fourier transform infrared spectromicroscopy (FTIRM), the aqueous environment imposes severe limitations due to the strong absorption of liquid water in the infrared regime. Here we propose a microfabricated multi-compartmental and reusable hydrated sample platform suitable for use with several analytical techniques, which employs the conformal encapsulation of biological specimens by a few layers of atomically thin graphene. Such an electron, X-ray, and infrared transparent, molecularly impermeable and mechanically robust enclosure preserves the hydrated environment around the object for a sufficient time to allow in situ examination of hydrated bio-objects with techniques operating under both ambient and high vacuum conditions. An additional hydration source, provided by hydrogel pads lithographically patterned in the liquid state near/around the specimen and co-encapsulated, has been added to further extend the hydration lifetime. Note that the in-liquid lithographic electron beam-induced gelation procedure allows for addressable capture and immobilization of the biological cells from the solution. Scanning electron microscopy and optical fluorescence microscopy, as well as synchrotron radiation based FTIR and X-ray fluorescence microscopy, have been used to test the applicability of the platform and for its validation with yeast, A549 human carcinoma lung cells and micropatterned gels as biological object phantoms.

Amphiphilicity of Intricate Layered Graphene/g-C3N4 Nanosheets

The hybrid heterostructure of the tri-s-triazine form of graphitic carbon nitride (g-C₃N₄), a stable two-dimensional material, results from intricate layer formation with graphene. In this material, g-C₃N₄, an amphiphilic material, stabilizes Pickering emulsions as an emulsifier and can effectively disperse graphene. Due to the various technological applications of the hybrid nanosheets in an aqueous environment, it is essential to study the interaction of water molecules with graphene and g-C₃N₄ (Gr/g-C₃N₄)-combined heterostructure. Although few studies have been performed signifying the water orientation in the interfacial layer, we find that there is a lack of detailed studies using various dynamical and structural properties of the interfacial water molecules. The interface of the Gr/g-C₃N₄ hybrid structure, one of the rarely found amphiphilic interfaces (on the g-C₃N₃ side), is appropriate for exploring the water affinity due to the availability of heterogeneous interfacial aqueous interactions. We adopted classical molecular dynamics simulations using two models for water molecules to study the structure and dynamics of an aqueous interface. We have correlated the structural properties to dynamics and spectral properties to understand the overall behavior of the amphiphilic interface. Our results branch into two significant hydrogen bond (HB) properties in HB count and HB strength among the water molecules in the different layers. The HB counts in the different layers of water are correlated using the average distance distribution (P_rO4), tetrahedral order parameters, HB donor/acceptor count, and total HBs per water molecule. A conspicuous difference is found in the HB count and related dynamics of the system. The HB lifetime and diffusion coefficient hint at the equivalent strength of HBs in the different layers. All the findings conclude that the amphiphilicity of the Gr/g-C₃N₄ interface can help in understanding various interfacial physical and chemical processes.

Machine Learning Approach for Describing Water OH Stretch Vibrations

A machine learning approach employing neural networks is developed to calculate the vibrational frequency shifts and transition dipole moments of the symmetric and antisymmetric OH stretch vibrations of a water molecule surrounded by water molecules. We employed the atom-centered symmetry functions (ACSFs), polynomial functions, and Gaussian-type orbital-based density vectors as descriptor functions and compared their performances in predicting vibrational frequency shifts using the trained neural networks. The ACSFs perform best in modeling the frequency shifts of the OH stretch vibration of water among the types of descriptor functions considered in this paper. However, the differences in performance among these three descriptors are not significant. We also tried a feature selection method called CUR matrix decomposition to assess the importance and leverage of the individual functions in the set of selected descriptor functions. We found that a significant number of those functions included in the set of descriptor functions give redundant information in describing the configuration of the water system. We here show that the predicted vibrational frequency shifts by trained neural networks successfully describe the solvent-solute interaction-induced fluctuations of OH stretch frequencies.

Thermally Driven Transformation of Water Clustering Structures at Self-Assembled Monolayers

Water clustering structures are considered to play key roles in various temperature-dependent life activities. However, our fundamental understanding of the temperature-dependent water structures remains murky because of the limits of the real-time and real-condition monitoring techniques at the molecular level. We propose an in situ ATR-IR approach combining Gaussian fitting to qualitatively and quantitatively explore the temperature-dependent structural stability and transformation of the three water components, multimer water (MW), intermediate water (IW), and network water (NW), on interfaces with different wettabilities. Our results show that the transformation between NW and IW/MW will occur with a change in temperature. This conversion process shows reversibility on hydrophilic Au NPs film/ZnSe, while it is irreversible on a hydrophobic mercaptohexane self-assembled monolayer due to the irreversibility of the monolayer structure and the hydrophobic confinement effect. The established approach enables us to explore the change in the water properties at any interfaces upon external stimuli.

Hydration of a small protein under carbon nanotube confinement: Adsorbed substates induce selective separation of the dynamical response

The co-involvement of biological molecules and nanomaterials has increasingly come to the fore in modern-day applications. While the "bio-nano" (BN) interface presents physico-chemical characteristics that are manifestly different from those observed in isotropic bulk conditions, the underlying molecular reasons remain little understood; this is especially true of anomalies in interfacial hydration. In this paper, we leverage atomistic simulations to study differential adsorption characteristics of a small protein on the inner (concave) surface of a single-walled carbon nanotube whose diameter exceeds dimensions conducive to single-file water movement. Our findings indicate that the extent of adsorption is decided by the degree of foldedness of the protein conformational substate. Importantly, we find that partially folded substates, but not the natively folded one, induce reorganization of the protein hydration layer into an inner layer water closer to the nanotube axis and an outer layer water in the interstitial space near the nanotube walls. Further analyses reveal sharp dynamical differences between water molecules in the two layers as observed in the onset of increased heterogeneity in rotational relaxation and the enhanced deviation from Fickian behavior. The vibrational density of states reveals that the dynamical distinctions are correlated with differences in crucial bands in the power spectra. The current results set the stage for further systematic studies of various BN interfaces vis-à-vis control of hydration properties.