Surface vibrational structure at alkane liquid/vapor interfaces

Interfacial Inversion, Interference, and IR Absorption in Vibrational Sum Frequency Scattering Experiments

Molecular interfacial structure greatly determines the properties of nano- and microscale systems. Vibrational sum frequency scattering (SFS) spectroscopy is a unique interface-selective tool to measure the interfacial vibrational spectrum of sub-micron to micron-scale objects dispersed in liquid and solid media. The interfacial structure is extracted from the interfacial susceptibility, a physical property derived from the intensity. Here, we describe the effect of infrared absorption that occurs in a bulk medium that is spectroscopically complex and use the results to investigate the effects of interfacial inversion, interfacial interference, and interfacial interference combined with absorption. We use the same three chemicals to do so, hexadecane oil, water, and a neutral Span80 surfactant. For all cases, the effective surface susceptibility can be retrieved from the intensity. We further find that inverting the phases results in different interfacial structures, even though they are composed of the same three chemicals, and explain this in terms of the different interactions that are necessary to stabilize the drops: steric stabilization for water drops in oil vs. charge stabilization for oil drops in water. Interfacial interference can be used to estimate the surface density of different compounds.

Tutorial on the instrumentation of sum frequency generation vibrational spectroscopy: Using a Ti:sapphire based system as an example

Sum frequency generation vibrational spectroscopy (SFG-VS) is an intrinsically surface-selective vibrational spectroscopic technique based on the second-order nonlinear optical process. Since its birth in the 1980s, SFG-VS has been used to solve interfacial structure and dynamics in a variety of research fields including chemistry, physics, materials sciences, biological sciences, environmental sciences, etc. Better understanding of SFG-VS instrumentation is no doubt an essential step to master this sophisticated technique. To address this need, here we will present a Tutorial with respect to the classification, setup layout, construction, operation, and data processing about SFG-VS. We will focus on the steady state Ti:sapphire based broad bandwidth SFG-VS system and use it as an example. We hope this Tutorial is beneficial for newcomers to the SFG-VS field and for people who are interested in using SFG-VS technique in their research.

Surfactant Adsorption to Gypsum Surfaces and the Effects on Solubility in Aqueous Solutions

Vibrational sum frequency generation (VSFG) spectroscopy, conductometric titration measurements, and EDX elemental mapping were used to examine surfactant adsorption to the gypsum (010) surface and assess the effects of surfactant adsorption on gypsum solubility in aqueous solutions. Sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium chloride (DTAC) were used as anionic and cationic surfactants, respectively. Gypsum/SDS interactions result in an ordered precipitate layer on the gypsum surface after water evaporation; gypsum/DTAC interaction did not show a similar effect, despite exposure of gypsum to equivalent amounts of surfactant. VSFG spectra showed that SDS molecules adsorb with their chains parallel to the gypsum surface; spectra from gypsum surfaces treated with DTAC, however, showed no measurable response, implying that these surfactants form disorganized aggregates with no polar ordering. Vibrational data were supported by independent EDX measurements that show a uniform distribution of SDS across the gypsum surface. In contrast, element-specific EDX images showed that DTAC clustered in tightly localized patches that left most of the gypsum surface exposed. The uniform adsorption of SDS on the gypsum surface suppresses long-term dissolution up to 40% when compared to samples exposed to DTAC. Gypsum samples in DTAC-containing solutions lose approximately the same amount of material to dissolution as samples immersed in pure water.

Effect of Surfactants on the Molecular Structure of the Buried Oil/Water Interface

The oil/water interface, for instance in emulsions, is often stabilized by surfactants. Hence, the co-existence of oil, water, and surfactant molecules at the buried oil/water interface determines macroscopic properties such as surface tension or emulsion stability. Utilizing an inherently surface sensitive spectroscopic method, sum frequency generation (SFG) spectroscopy, we show that adsorption of an anionic surfactant to the buried oil/water interface increases the magnitude of the interfacial electric field. Meanwhile, the degree of ordering of the interfacial oil molecules increases with the surfactant concentration owing to the intercalation of aliphatic chains of interfacial oil and surfactant molecules. At sufficiently high surfactant concentrations, the interfacial charge reaches a maximum value and the interfacial oil molecules arrange in a fully ordered conformation, a state which coincides with the significant decrease in interfacial tension and increased emulsion stability.

Development of interface-/surface-specific two-dimensional electronic spectroscopy

Structures, kinetics, and chemical reactivities at interfaces and surfaces are key to understanding many of the fundamental scientific problems related to chemical, material, biological, and physical systems. These steady-state and dynamical properties at interfaces and surfaces require even-order techniques with time-resolution and spectral-resolution. Here, we develop fourth-order interface-/surface-specific two-dimensional electronic spectroscopy, including both two-dimensional electronic sum frequency generation (2D-ESFG) spectroscopy and two-dimensional electronic second harmonic generation (2D-ESHG) spectroscopy, for structural and dynamics studies of interfaces and surfaces. The 2D-ESFG and 2D-ESHG techniques were based on a unique laser source of broadband short-wave IR from 1200 nm to 2200 nm from a home-built optical parametric amplifier. With the broadband short-wave IR source, surface spectra cover most of the visible light region from 480 nm to 760 nm. A translating wedge-based identical pulses encoding system (TWINs) was introduced to generate a phase-locked pulse pair for coherent excitation in the 2D-ESFG and 2D-ESHG. As an example, we demonstrated surface dark states and their interactions of the surface states at p-type GaAs (001) surfaces with the 2D-ESFG and 2D-ESHG techniques. These newly developed time-resolved and interface-/surface-specific 2D spectroscopies would bring new information for structure and dynamics at interfaces and surfaces in the fields of the environment, materials, catalysis, and biology.

Confined Complexation Reaction of Metal Ions with a Lipophilic Surfactant at the Water/Air Interface: A New Understanding Based on Surface Experiments and Molecular Dynamics Simulations

Understanding the fundamentals of confined chemical reaction was an important subject in various heterogeneous physicochemical processes. Here, we investigated the orientation behavior of an amphiphilic ligand, the tri- n-octylphosphine oxide (TOPO), in a compressed monolayer at the air/water interface and its impact on the complexation reactivity of TOPO molecules with chromate ions at the interface. The analysis of sum frequency generation and polarization modulation infrared reflection absorption spectroscopy experiments combined with surface pressure measurements reveals a significant dependence of the adsorption rate and saturated concentration of chromate ions on the orientation of TOPO molecules during the increase of the surface pressure. In parallel, the analysis of molecular dynamics simulations indicates that the interaction energy between TOPO molecules and chromate ions is strongly sensitive to the orientation of TOPO molecules confined at the water/air interface. The present work provides a novel insight into the unique chemical reactivity of molecules in a confined microenvironment, and it provides a basis for further progresses in improving chemical reactivity and selectivity of molecules in a confined environment by regulating confinement of molecules.

Zwitterionic and Charged Lipids Form Remarkably Different Structures on Nanoscale Oil Droplets in Aqueous Solution

The molecular structure of zwitterionic and charged monolayers on small oil droplets in aqueous solutions is determined using a combined second harmonic and sum frequency study. From the interfacial vibrational signature of the acyl chains and phosphate headgroups as well as the response of the hydrating water, we find that zwitterionic and charged lipids with identical acyl chains form remarkably different monolayers. Zwitterionic phospholipids form a closely packed monolayer with highly ordered acyl tails. In contrast, the charged phospholipids form a monolayer with a low number density and disordered acyl tails. The charged headgroups are oriented perpendicular to the monolayer rather than parallel, as is the case for zwitterionic lipids. These significant differences between the two types of phospholipids indicate important roles of phospholipid headgroups in the determination of properties of cellular membranes and lipid droplets. The observed behavior of charged phospholipids is different from expectations based on studies performed on extended planar interfaces, at which condensed monolayers are readily formed. The difference can be explained by nanoscale related changes in charge condensation behavior that has its origin in a different balance of interfacial intermolecular interactions.

Specificity Switching Pathways in Thermal and Mass Evaporation of Multicomponent Hydrocarbon Droplets: A Mesoscopic Observation

For well over one century, the Hertz-Knudsen equation has established the relationship between thermal - mass transfer coefficients through a liquid - vapour interface and evaporation rate. These coefficients, however, have been often separately estimated for one-component equilibrium systems and their simultaneous influences on evaporation rate of fuel droplets in multicomponent systems have yet to be investigated at the atomic level. Here we first apply atomistic simulation techniques and quantum/statistical mechanics methods to understand how thermal and mass evaporation effects are controlled kinetically/thermodynamically. We then present a new development of a hybrid method of quantum transition state theory/improved kinetic gas theory, for multicomponent hydrocarbon systems to investigate how concerted-distinct conformational changes of hydrocarbons at the interface affect the evaporation rate. The results of this work provide an important physical concept in fundamental understanding of atomistic pathways in topological interface transitions of chain molecules, resolving an open problem in kinetics of fuel droplets evaporation.

Structure and Mass Transport Characteristics at the Intrinsic Liquid-Vapor Interfaces of Alkanes

In this paper, an instantaneous interface definition has been used to study the intrinsic structure and self-diffusion coefficient in the vicinity of the liquid-vapor interfaces of decane and tetracosane at three different temperatures using molecular dynamics simulations, and the results have been compared with those obtained on the basis of the conventional Gibbs dividing surface (time- and space-averaged interface). The alkane molecules were modeled using the united atom NERD force field. Partial layered structures of alkane molecules at the liquid-vapor interface are observed as a pinned structure of alkane liquids based on the intrinsic interface. This kind of characteristic has not been observed in the density profiles obtained based on the Gibbs dividing surface. By examining the orientation order parameter and radius of gyration of the alkane molecules, it was observed that the alkane molecules were preferentially oriented to be more parallel to the intrinsic interface than to the Gibbs dividing surface, and the shape of the alkane molecules is slightly changed in the vicinity of the liquid-vapor interfaces. The self-diffusion coefficient parallel to the intrinsic interface was examined using the Green-Kubo relation, where the projection of the velocity in the parallel direction to the local intrinsic interface is used in the velocity correlation function. It was found that the self-diffusion coefficient in the direction parallel to the intrinsic interface changes as the position approaches the interface in a more obvious manner as compared with the self-diffusion coefficient obtained with respect to the Gibbs dividing surface. These results suggest that the use of an instantaneous interface definition allowed us to capture sharp variations in transport properties which are originating due to steeper structure at the liquid-vapor interfaces.

Revisiting kinetic boundary conditions at the surface of fuel droplet hydrocarbons: An atomistic computational fluid dynamics simulation

The role of boundary conditions at the interface for both Boltzmann equation and the set of Navier-Stokes equations have been suggested to be important for studying of multiphase flows such as evaporation/condensation process which doesn’t always obey the equilibrium conditions. Here we present aspects of transition-state theory (TST) alongside with kinetic gas theory (KGT) relevant to the study of quasi-equilibrium interfacial phenomena and the equilibrium gas phase processes, respectively. A two-state mathematical model for long-chain hydrocarbons which have multi-structural specifications is introduced to clarify how kinetics and thermodynamics affect evaporation/condensation process at the surface of fuel droplet, liquid and gas phases and then show how experimental observations for a number of n-alkane may be reproduced using a hybrid framework TST and KGT with physically reasonable parameters controlling the interface, gas and liquid phases. The importance of internal activation dynamics at the surface of n-alkane droplets is established during the evaporation/condensation process.

Alteration of Membrane Compositional Asymmetry by LiCoO2 Nanosheets

Given the projected massive presence of redox-active nanomaterials in the next generation of consumer electronics and electric vehicle batteries, they are likely to eventually come in contact with cell membranes, with biological consequences that are currently not known. Here, we present nonlinear optical studies showing that lithium nickel manganese cobalt oxide nanosheets carrying a negative ζ-potential have no discernible consequences for lipid alignment and interleaflet composition in supported lipid bilayers formed from zwitterionic and negatively charged lipids. In contrast, lithiated and delithiated LiCoO2 nanosheets having positive and neutral ζ-potentials, respectively, alter the compositional asymmetry of the two membrane leaflets, and bilayer asymmetry remains disturbed even after rinsing. The insight that some cobalt oxide nanoformulations induce alterations to the compositional asymmetry in idealized model membranes may represent an important step toward assessing the biological consequences of their predicted widespread use.

Three Dimensional Nano "Langmuir Trough" for Lipid Studies

A three-dimensional-phospholipid monolayer with tunable molecular structure was created on the surface of oil nanodroplets from a mixture of phospholipids, oil, and water. This simple nanoemulsion preparation technique generates an in situ prepared membrane model system with controllable molecular surface properties that resembles a lipid droplet. The molecular interfacial structure of such a nanoscopic system composed of hexadecane, 1,2-dihexadecanoyl-sn-glycero-3-phosphocholine (DPPC), and water was determined using vibrational sum frequency scattering and second harmonic scattering techniques. The droplet surface structure of DPPC can be tuned from a tightly packed liquid condensed phase like monolayer to a more dilute one that resembles the liquid condensed/liquid expanded coexistence phase by varying the DPPC/oil/water ratio. The tunability of the chemical structure, the high surface-to-volume ratio, and the small sample volume make this system an ideal model membrane for biochemical research.

Counting the number of magnesium ions bound to the surface-immobilized thymine oligonucleotides that comprise spherical nucleic acids

Label-free studies carried out under aqueous phase conditions quantify the number of Mg(2+) ions binding to surface-immobilized T40 sequences, the subsequent reordering of DNA on the surface, and the consequences of Mg(2+) binding for DNA-DNA interactions. Second harmonic generation measurements indicate that, within error, 18-20 Mg(2+) ions are bound to the T40 strand at saturation and that the metal-DNA interaction is associated with a near 30% length contraction of the strand. Structural reordering, evaluated using vibrational sum frequency generation, atomic force microscopy, and dynamic light scattering, is attributed to increased charge screening as the Mg(2+) ions bind to the negatively charged DNA, reducing repulsive Coulomb forces between nucleotides and allowing the DNA single strands to collapse or coil upon themselves. The impact of Mg(2+) binding on DNA hybridization and duplex stability is assessed with spherical nucleic acid (SNA) gold nanoparticle conjugates in order to determine an optimal working range of Mg(2+) concentrations for DNA-DNA interactions in the absence of NaCl. The findings are consistent with a charge titration effect in which, in the absence of NaCl, (1) hybridization does not occur at room temperature if an average of 17.5 or less Mg(2+) ions are bound per T40 strand, which is not reached until the bulk Mg(2+) concentration approaches 0.5 mM; (2) hybridization proceeds, albeit with low duplex stability having an average Tm of 31(3)°C, if an average of 17.5-18.0 Mg(2+) ions are bound; and (3) highly stable duplexes having a Tm of 64(2)°C form if 18.5-19.0 Mg(2+) ions are bound, corresponding to saturation of the T40 strand.

Vibrational sum frequency generation spectroscopy of secondary organic material produced by condensational growth from α-pinene ozonolysis

Secondary organic material (SOM) was produced in a flow tube from α-pinene ozonolysis, and collected particles were analyzed spectroscopically via a nonlinear coherent vibrational spectroscopic technique, namely sum frequency generation (SFG). The SOM precursor α-pinene was injected into the flow tube reactor at concentrations ranging from 0.125 ± 0.01 ppm to 100 ± 3 ppm. The oxidant ozone was varied from 0.15 ± 0.02 to 194 ± 2 ppm. The residence time was 38 ± 1 s. The integrated particle number concentrations, studied using a scanning mobility particle sizer (SMPS), varied from no particles produced up to (1.26 ± 0.02) × 10(7) cm(-3) for the matrix of reaction conditions. The mode diameters of the aerosols increased from 7.7 nm (geometric standard deviation (gsd), 1.0) all the way to 333.8 nm (gsd, 1.9). The corresponding volume concentrations were as high as (3.0 ± 0.1) × 10(14) nm(3) cm(-3). The size distributions indicated access to different particle growth stages, namely condensation, coagulation, or combination of both, depending on reaction conditions. For filter collection and subsequent spectral analysis, reaction conditions were selected that gave a mode diameter of 63 ± 3 nm and 93 ± 3 nm, respectively, and an associated mass concentration of 12 ± 2 μg m(-3) and (1.2 ± 0.1) × 10(3) μg m(-3) for an assumed density of 1200 kg m(-3). Teflon filters loaded with 24 ng to 20 μg of SOM were analyzed by SFG. The SFG spectra obtained from particles formed under condensational and coagulative growth conditions were found to be quite similar, indicating that the distribution of SFG-active C-H oscillators is similar for particles prepared under both conditions. The spectral features of these flow-tube particles agreed with those prepared in an earlier study that employed the Harvard Environmental Chamber. The SFG intensity was found to increase linearly with the number of particles, consistent with what is expected from SFG signal production from particles, while it decreased at higher mass loadings of 10 and 20 μg, consistent with the notion that SFG probes the top surface of the SOM material following the complete coverage of the filter. The linear increase in SFG intensity with particle density also supports the notion that the average number of SFG active oscillators per particle is constant for a given particle size, that the particles are present on the collection filters in a random array, and that the particles are not coalesced. The limit of detection of SFG intensity was established as 24 ng of mass on the filter, corresponding to a calculated density of about 100 particles in the laser spot. As established herein, the technique is applicable for detecting low particle number or mass concentrations in ambient air. The related implication is that SFG is useful for short collection times and would therefore provide increased temporal resolution in a locally evolving atmospheric environment.

Displacement of hexanol by the hexanoic acid overoxidation product in alcohol oxidation on a model supported palladium nanoparticle catalyst

This work characterizes the adsorption, structure, and binding mechanism of oxygenated organic species from cyclohexane solution at the liquid/solid interface of optically flat alumina-supported palladium nanoparticle surfaces prepared by atomic layer deposition (ALD). The surface-specific nonlinear optical vibrational spectroscopy, sum-frequency generation (SFG), was used as a probe for adsorption and interfacial molecular structure. 1-Hexanoic acid is an overoxidation product and possible catalyst poison for the aerobic heterogeneous oxidation of 1-hexanol at the liquid/solid interface of Pd/Al(2)O(3) catalysts. Single component and competitive adsorption experiments show that 1-hexanoic acid adsorbs to both ALD-prepared alumina surfaces and alumina surfaces with palladium nanoparticles, that were also prepared by ALD, more strongly than does 1-hexanol. Furthermore, 1-hexanoic acid adsorbs with conformational order on ALD-prepared alumina surfaces, but on surfaces with palladium particles the adsorbates exhibit relative disorder at low surface coverage and become more ordered, on average, at higher surface coverage. Although significant differences in binding constant were not observed between surfaces with and without palladium nanoparticles, the palladium particles play an apparent role in controlling adsorbate structures. The disordered adsorption of 1-hexanoic acid most likely occurs on the alumina support, and probably results from modification of binding sites on the alumina, adjacent to the particles. In addition to providing insight on the possibility of catalyst poisoning by the overoxidation product and characterizing changes in its structure that result in only small adsorption energy changes, this work represents a step toward using surface science techniques that bridge the complexity gap between fundamental studies and realistic catalyst models.

Observation of buried water molecules in phospholipid membranes by surface sum-frequency generation spectroscopy

We investigate the structure and orientation of water molecules at the water-lipid interface, using vibrational sum-frequency generation in conjunction with a maximum entropy phase retrieval method. We find that interfacial water molecules have an orientation opposite to that predicted by electrostatics and thus are likely localized between the lipid headgroup and its apolar alkyl chain. This type of water molecule is observed for phospholipids but not for structurally simpler surfactants.

Probing water and biomolecules at the air-water interface with a broad bandwidth vibrational sum frequency generation spectrometer from 3800 to 900 cm(-1)

We have built a broad bandwidth vibrational sum frequency generation (VSFG) spectrometer that can provide high-quality spectra over the range of 3800 to 900 cm(-1). The spectrometer contains a commercial Ti:sapphire based 6 W regenerative amplifier as the master light source, a home-built pulse shaper to produce a narrow bandwidth 800 nm beam, a commercial optical parametric amplifier to generate a broad bandwidth femtosecond infrared (IR) pulse, and a detection system with a monochromator and a charge-coupled device (CCD). We applied this spectrometer to obtain VSFG spectra of a lipid monolayer at the air-water interface in the O-H stretching region (3800-3000 cm(-1)), the C-H stretching region (3100-2700 cm(-1)), the C-D stretching region (2300-2000 cm(-1)), the C=O stretching region (1800-1700 cm(-1)), and the PO(2)(-) symmetric stretching region (1200-1000 cm(-1)). We also obtained the VSFG spectrum of neat water in the O-H stretching region (3800-3000 cm(-1)) and the VSFG spectrum of a protein, alpha-synuclein, in the amide I region (1700-1600 cm(-1)) at the air-water interface. The spectrometer can provide a VSFG spectrum in the O-H stretching region (3800-3000 cm(-1)) without scanning the IR frequency. This feature will be useful in probing water dynamics at interfaces because the free OH and H-bonded OH can be investigated simultaneously. We have also provided instrumental details and discussed further improvements that should be beneficial to other researchers interested in setting up VSFG instrumentation.

Intrinsic structure of hydrophobic surfaces: the oil-water interface

We investigate the water-oil interface using molecular dynamics simulations of realistic models of alkanes and water. The intrinsic density profiles are computed using a methodology that removes the smoothing effect of the capillary waves. We show that at 300 K the intrinsic width of the gap separating the oil and water phases spans little more than one water molecule diameter, and undergoes very weak short-ranged fluctuations, indicating that the water-oil interface is a rigid molecular structure at ambient temperature. Only near the drying transition (above 500 K for dodecane), the gap features uncoupled fluctuations of the oil and water surfaces, as expected in a typical drying structure. We find that the intrinsic structure of water next to the oil phase is remarkably similar to the bare water-vapor interface.

Interfacial behavior of common food contact polymer additives

Irganox 1076 (IN1076) and Irganox 1010 (IN1010), phenol containing species often used as antioxidant additives in food packaging polymers have both hydrophilic and hydrophobic functional groups. Consequently these additives are likely to absorb to surfaces where their free energy is minimized. Experiments described in this work examine the two-dimensional phase behavior and vibrational structure of IN1076 and IN1010 films adsorbed to the air/water interface. Surface pressure isotherms show that repeated compression of these films leads to continued irreversible loss of molecules and that on a per molecule basis, this loss is more pronounced for IN1076 than for IN1010. Differences in the surface properties of these two antioxidant additives are interpreted based on differences in molecular structure. Surface specific vibrational measurements of these organic films show very little conformational order, implying that even when closely packed, both antioxidant species have little affinity for forming highly organized domains. These findings have important ramifications for mechanisms that reduce antioxidant activity in polymers as well as descriptions of antioxidant blooming on polymer surfaces.