Nuclear magnetic resonance investigation of dynamics in poly(ethylene oxide)-based lithium polyether-ester-sulfonate ionomers

Use of Solid-State NMR Spectroscopy for the Characterization of Molecular Structure and Dynamics in Solid Polymer and Hybrid Electrolytes

Solid-state NMR spectroscopy is an established experimental technique which is used for the characterization of structural and dynamic properties of materials in their native state. Many types of solid-state NMR experiments have been used to characterize both lithium-based and sodium-based solid polymer and polymer-ceramic hybrid electrolyte materials. This review describes several solid-state NMR experiments that are commonly employed in the analysis of these systems: pulse field gradient NMR, electrophoretic NMR, variable temperature T1 relaxation, T2 relaxation and linewidth analysis, exchange spectroscopy, cross polarization, Rotational Echo Double Resonance, and isotope enrichment. In this review, each technique is introduced with a short description of the pulse sequence, and examples of experiments that have been performed in real solid-state polymer and/or hybrid electrolyte systems are provided. The results and conclusions of these experiments are discussed to inform readers of the strengths and weaknesses of each technique when applied to polymer and hybrid electrolyte systems. It is anticipated that this review may be used to aid in the selection of solid-state NMR experiments for the analysis of these systems.

β-NMR measurements of molecular-scale lithium-ion dynamics in poly(ethylene oxide)-lithium-salt thin films

β-detected NMR (β-NMR) has been used to study the molecular-scale dynamics of lithium ions in thin films of poly(ethylene oxide) (PEO) containing either lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) or lithium trifluoroacetate (LiTFA) salts at monomer-to-salt ratios (EO/Li) of 8.3. The results are compared with previous β-NMR measurements on pure PEO and PEO with lithium triflate (LiOTf) at the same loading [McKenzie et al., J. Am. Chem. Soc. 136, 7833 (2014)]. Activated hopping of ⁸Li⁺ was observed in all of the films above ∼250 K, with the hopping parameters strongly correlated with the ionicity of the lithium salt rather than the polymer glass transition temperature. The pre-exponential factor increases exponentially with ionicity, while the activation energy for hopping increases approximately linearly, going from 6.3±0.2 kJ mol^-1 in PEO:LiTFA to 17.8±0.2 kJ mol^-1 in PEO:LiTFSI. The more rapid increase in the pre-exponential factor outweighs the effect of the larger activation energy and results in ⁸Li⁺ hopping being fastest in PEO followed by PEO:LiTFSI, PEO:LiOTf, and PEO:LiTFA.

Poly(ether ester) Ionomers as Water-Soluble Polymers for Material Extrusion Additive Manufacturing Processes

Water-soluble polymers as sacrificial supports for additive manufacturing (AM) facilitate complex features in printed objects. Few water-soluble polymers beyond poly(vinyl alcohol) enable material extrusion AM. In this work, charged poly(ether ester)s with tailored rheological and mechanical properties serve as novel materials for extrusion-based AM at low temperatures. Melt transesterification of poly(ethylene glycol) (PEG, 8k) and dimethyl 5-sulfoisophthalate afforded poly(ether ester)s of sufficient molecular weight to impart mechanical integrity. Quantitative ion exchange provided a library of poly(ether ester)s with varying counterions, including both monovalent and divalent cations. Dynamic mechanical and tensile analysis revealed an insignificant difference in mechanical properties for these polymers below the melting temperature, suggesting an insignificant change in final part properties. Rheological analysis, however, revealed the advantageous effect of divalent countercations (Ca²⁺, Mg²⁺, and Zn²⁺) in the melt state and exhibited an increase in viscosity of two orders of magnitude. Furthermore, time-temperature superposition identified an elevation in modulus, melt viscosity, and flow activation energy, suggesting intramolecular interactions between polymer chains and a higher apparent molecular weight. In particular, extrusion of poly(PEG_8k-co-CaSIP) revealed vast opportunities for extrusion AM of well-defined parts. The unique melt rheological properties highlighted these poly(ether ester) ionomers as ideal candidates for low-temperature material extrusion additive manufacturing of water-soluble parts.

Silica nanoparticles densely grafted with PEO for ionomer plasticization

PEO-grafted nanoparticles and hydroxylated nanoparticles demonstrate different ionic conductivity–viscosity temperature dependence in nanocomposite ionomers.

β-NMR measurements of lithium ion transport in thin films of pure and lithium-salt-doped poly(ethylene oxide)

β-Detected nuclear spin relaxation of (8)Li(+) has been used to study the microscopic diffusion of lithium ions in thin films of poly(ethylene oxide) (PEO), where the implanted lithium ions are present in extremely low concentration, and PEO with 30 wt % LiCF3SO3 over a wide range of temperatures both above and below the glass transition temperature. Recent measurements by Do et al. [Phys. Rev. Lett. 2013, 111, 018301] found that the temperature dependence of the Li(+) conductivity was identical to that of the dielectric α relaxation and was well described by the Vogel-Fulcher-Tammann relation, implying the α relaxation dominates the Li(+) transport process. In contrast, we find the hopping of Li(+) in both samples in the high temperature viscoelastic phase follows an Arrhenius law and depends significantly on the salt content. We propose that the hopping of Li(+) between cages involves motion of the polymer but that it is only for long-range diffusion where the α relaxation plays an important role.

Superionic behavior in polyethylene-oxide-based single-ion conductors

We demonstrate superionic ion conduction in simulations of a poly(ethylene oxide)-based polymer electrolyte. The superionic conduction uses cation hopping via chain-like ion aggregates, enabling long-range charge transfer while ions only move locally. The Na single-ion conductor achieves two essential features of superionic metal ion conductors: one-dimensional ion structure and immobile anions. The superionic conduction depends on the number and length of conduction pathways, the conduction pathway lifetime, and the rate at which end ions join and leave the pathway.