Cu and Ag as one‐valence‐electron atoms: CI results and quadrupole corrections for Cu2, Ag2, CuH, and AgH

Spin-orbit coupling in low-lying electronic states of CuH

Potential energy curves for the low-lying electronic states of CuH have been calculated using the MRCI method with a large active space containing the 3d, 4s, 4pz and 3d' orbitals of the copper atom. All electronic states of CuH correlating with the 3d10 4s1 (2S) and 3d9 4s2 (2D) states of Cu were included, and spin-orbit corrections were calculated using the MRCI wavefunctions. Potential energy curves were obtained for individual Ω states, and the Einstein A coefficients were computed for the spin-forbidden transitions from the low-lying electronic states to the X1Σ+ ground state. Diagonal and off-diagonal elements of the spin-orbit Hamiltonian matrix were calculated for the X1Σ+, A1Σ+, 13Σ+, 23Σ+, 11Π, 13Π, 11Δ and 13Δ states, and the mixing of vibronic wavefunctions was investigated using the eigenvectors. The available experimental data on vibrational levels of the A1Σ+ excited state of CuH and CuD were combined in a multi-isotopologue Birge-Sponer plot, and the ab initio data on the unobserved vibrational levels were used for a more accurate extrapolation, resulting in a new experimental value for the equilibrium dissociation energy (De) of the CuH molecule. The De value for the ground state of CuH was determined to be 22 630 ± 250 cm-1, resulting in D0 values of 2.686 and 2.720 eV for CuH and CuD, respectively. Therefore, new experimental values for the bond dissociation enthalpies of CuH and CuD are reported to be 262.9 ± 3 and 266.2 ± 3 kJ mol-1, respectively.

Electronic Structures and Spectroscopic Signatures of Noble-Gas-Doped Nanodiamonds

Fluorescent nanodiamonds, that is, those containing optically active defects, have attracted interest for their ability to be used as qubits; for in vivo imaging; and as sensors for spin, stress, and temperature. One of the most commonly studied nanodiamond color centers is the nitrogen vacancy. However, there is strong interest in discovering other impurity centers that provide localized midband gap transitions. Noble gas atoms have garnered attention since they have been discovered within nanodiamonds produced through high-pressure-high-temperature laser-heated diamond anvil cell synthesis methods, where they are commonly used as hydrostatic pressure media. Noble gas atoms that exist in macrosized natural or synthetic diamonds have been shown to be able to form color centers. This research uses ab initio density functional theory and cluster models to systematically study the localized electronic structure for group VIII impurities of nanodiamond, including helium, neon, argon, krypton, and xenon. An in-depth examination of the interaction between the noble gas atom and diamond lattice has been carried out. The changes to the vibrational and UV/vis absorption spectra have been analyzed. It was determined that the energetically preferred geometry is dependent on the atom size. Most noble gas defects are stabilized within the nanodiamond lattice and exist in tetrahedral interstitial positions, except for the largest noble gas studied in this work, Xe, which was determined to prefer a substitutional configuration. Both Kr and Xe are expected to be able to manifest visible/near-IR optical responses when included in the diamond lattice.

Explaining the High Catalytic Activity in Bis(indenyl)methyl Zirconium Cation Using Combined EDA-NOCV/QTAIM Approach

The main purpose of this study is to elucidate some discrepancies already observed in the catalytic activity values of some zirconocene methyl cations. The EDA-NOCV scheme was employed for a theoretical description of the interactions between an ethylene molecule and five catalysts of zirconocene methyl cation. The nature of the chemical interactions has been elucidated through the QTAIM topological analysis. The steric hindrance due to the ligands was evaluated qualitatively by means of an IRI-based analysis and quantitively through Fisher information. The findings prove that the indenyl ligand seems to favor the orbital interaction between the ethylene molecule and the metal centre of zirconocene methyl cation. Both electrostatic and orbital contributions play a crucial role in stabilising the studied complexes. Based on the NOCV deformation density contributions, the strongest orbital interaction is reached with the bis(indenyl)methyl zirconium cation, which is the only one exhibiting covalent interactions. Especially, the strong contribution of π-back donation (occurring from the occupied orbitals of the zirconium atom to the π* anti-bonding orbital of ethylene) may be a key to understand why this catalyst has a higher polymerisation yield than the other studied catalysts. This work suggests a perspective for predicting values of catalytic activity when theoretically designing novel catalysts of zirconocene type.

A combined QTAIM/IRI topological analysis of the effect of axial/equatorial positions of NH2 and CN substituents in the [(PY5Me2)MoO]+ complex

By means of the Interaction Region Indicator (IRI) and Quantum Theory of Atoms in Molecules (QTAIM), the influence exerted by NH₂ (amino) and CN (cyano) as electron donor and electron acceptor substituent groups, respectively, located at para-positions of axial and equatorial pyridine rings of derivatized complexes coming from the [(PY₅Me₂)MoO]⁺ complex during the hydrogen molecular release in the gas phase was analyzed. In any case, a H-H covalent bond is forming at the transition state, with a strengthening of the electron density of 5.5% when the substituent group involved is NH₂ at the para-position of the axial pyridine ring. However, there was no difference between NH₂ and CN when these substituent groups are located at the para-positions of the equatorial pyridine rings. The topological properties of electron densities from the QTAIM are not perturbed by the electron donor and electron acceptor nature of the substituents, even when these substituent groups are located at the axial or equatorial pyridine rings of the Mo-based complex.

Niobium and Tantalum Halocyanide Clusters: The Complete Family

Synthetic procedures providing straightforward access to the whole family of Nb and Ta halide clusters with terminal cyanide ligands have been developed. Corresponding [M₆X₁₂(CN)₁₂]^4- (M = Nb, Ta; X = Cl, Br) can be accessed by ligand-exchange procedures from K₄Nb₆X₁₈ (X = Cl, Br) and Bu₄NCN, (Et₄N)₂[Ta₆Cl₁₈] and Bu₄NCN and from [Ta₆Br₁₂(H₂O)₄Br₂]·4H₂O and KCN in moderate to high yields (50-80%). The products were isolated as Bu₄N salts. The compounds were investigated both experimentally and by quantum chemistry, revealing correlations between structural, electrochemical, electrostatic, electronic, and topological features as a function of type of metal, halide, and charge.

Benzothiazole-substituted 1,3-diaza-2-oxophenoxazine as a luminescent nucleobase surrogate for silver(I)-mediated base pairing

A benzothiazole-substituted derivative (X) of 1,3-diaza-2-oxophenoxazine was evaluated with respect to its ability to engage in Ag(I)-mediated homo base pair formation in two different DNA duplexes. The metal binding was determined by a combination of temperature-dependent UV spectroscopy, CD spectroscopy, and fluorescence spectroscopy, indicating the incorporation of two Ag(I) ions to generate a dinuclear X-Ag(I)₂-X base pair. Interestingly, a luminescence increase was observed upon metal binding. Theoretical luminescence spectra were calculated using time-dependent density functional theory (TDDFT) for all possible Ag(I)-mediated X : X base pair geometries to identify the species responsible for the increase in luminescence. The study shows that even bulky non-planar artificial nucleobases can be applied to form stabilizing metal-mediated base pairs.

A tricolor-switchable stimuli-responsive luminescent binuclear Cu(i) complex with switchable NH⋯O interactions

Blue-green-yellow tricolor luminescence conversion is attributed to the loss and recovery of CH2Cl2 solvent molecules and the destruction and restoration of the orderly packing array caused by the breaking and rebuilding of NH⋯O hydrogen bonds.

Energy Decomposition Analysis of Lewis Acid/Base Adducts and Frustrated Lewis Pairs: The Use of EOrb/ESteric Ratios as a Reaction Parameter

The nature of bonding in classical adducts and frustrated Lewis pairs (FLPs) of oxorhenium and nitridorhenium complexes with B(C₆F₅)₃ was investigated computationally (B3PW91-D3). These studies have revealed that the primary noncovalent interaction (NCI) in the FLPs involves lone pair/π interactions between the terminal M≡X bond and the aromatic C₆F₅ ring in B(C₆F₅)₃. Energy decomposition analyses on classical adducts and FLPs reveal that these species can be defined by the ratio (E_Orb/E_Steric) of covalent-to-noncovalent contributions to the total interaction energy, E_Int. This type of analysis reveals that values for FLPs exist in a narrow range (1.2-2.5), with values for adducts significantly outside this range. The application of this method to other main-group combinations of Lewis acids and bases that have been shown to exhibit FLP reactivity yields similar results. These data suggest that similar NCIs are present in both transition-metal and main-group FLPs, especially where Lewis acids such as B(C₆F₅)₃ are utilized.

The density polarization reveals directions of electron displacements due to the substituent effect: Analysis performed on a metal-organic Mo-Oxo catalyst

Some Mo-oxo complexes bearing pyridine rings have the capability for dihydrogen production from water. However, energy barrier and overall energy vary depending on the effect exerted by several substituent groups located at different positions around one or more pyridine rings which are ligands of these compounds. Based on the Karunadasa and coworkers investigation where the para-position was experimentally tested in compounds derivatised from the 2,6-bis[1,1-bis(2-pyridil)ethyl]-pyridine oxo-molybdenum complex synthesized (Karunadasa et al., Nature, 2010, 464, 1329), we tested the combined effect of electron-withdrawing and electron-donating groups simulated as perturbations represented by point-charges. Then, we used the density polarization concept, δρ(r), a local reactivity descriptor corresponding to the partially integrated linear response function, χ(r, r') (a non-local reactivity descriptor), which is able to reveal different displacements of π-electrons on molecular structures. We perturbed the para-positions in the pentadentate ligand 2,6-bis[1,1-bis(2-pyridil)ethyl]-pyridine in the Mo-based complex by means of point-charges. They were located in three different configurations of the organic ligand (trans, geminal, and cis) which could help to explain energy barriers and overall energy of reactions catalyzed by this type of Mo-complexes. Our results indicate that the trans configuration of point-charges induces the most amount of fraction of electron shifted on the complex. A Mo-based complex bearing the same trans configuration for electron-withdrawing and electron-donating substituent groups (cyano and amino, respectively), leads to a kinetically more favorable H₂ release than the cis or geminal configuration of the substituent groups aforementioned.

Multiscale Quantum Refinement Approaches for Metalloproteins

Biomolecules with metal ion(s) (e.g., metalloproteins) play many important biological roles. However, accurate structural determination of metalloproteins, particularly those containing transition metal ion(s), is challenging due to their complicated electronic structure, complex bonding of metal ions, and high number of conformations in biomolecules. Quantum refinement, which was proposed to combine crystallographic data with computational chemistry methods by several groups, can improve the local structures of some proteins. In this study, a quantum refinement method combining several multiscale computational schemes with experimental (X-ray diffraction) information was developed for metalloproteins. Various quantum refinement approaches using different ONIOM (our own N-layered integrated molecular orbital and molecular mechanics) combinations of quantum mechanics (QM), semiempirical (SE), and molecular mechanics (MM) methods were conducted to assess the performance and reliability on the refined local structure in two metalloproteins. The structures for two (Cu- or Zn-containing) metalloproteins were refined by combining two-layer ONIOM2(QM1/QM2) and ONIOM2(QM/MM) and three-layer ONIOM3(QM1/QM2/MM) schemes with experimental data. The accuracy of the quantum-refined metal binding sites was also examined and compared in these multiscale quantum refinement calculations. ONIOM3(QM/SE/MM) schemes were found to give good results with lower computational costs and were proposed to be a good choice for the multiscale computational scheme for quantum refinement calculations of metal binding site(s) in metalloproteins with high efficiency. Additionally, a two-center ONIOM approach was employed to speed up the quantum refinement calculations for the Zn metalloprotein with two remote active sites/ligands. Moreover, a recent quantum-embedding wavefunction-in-density functional theory (WF-in-DFT) method was also adopted as the high-level method in unprecedented ONIOM2(CCSD-in-B3LYP/MM) and ONIOM3(CCSD-in-B3LYP/SE/MM) calculations, which can be regarded as novel pseudo-three- and pseudo-four-layer ONIOM methods, respectively, to refine the key Zn binding site at the coupled-cluster singles and doubles (CCSD) level. These refined results indicate that multiscale quantum refinement schemes can be used to improve the structural accuracy obtained for local metal binding site(s) in metalloproteins with high efficiency.

Spontaneous electron emission vs dissociation in internally hot silver dimer anions

Referring to a recent experiment, we theoretically study the process of a two-channel decay of the diatomic silver anion (Ag₂ ^-), namely, the spontaneous electron ejection giving Ag₂ + e^- and the dissociation leading to Ag^- + Ag. The ground state potential energy curves of the silver molecules of diatomic neutral and negative ions were calculated using proper pseudo-potentials and atomic basis sets. We also estimated the non-adiabatic electronic coupling between the ground state of Ag₂ ^- and the ground state of Ag₂ + e^-, which, in turn, allowed us to estimate the minimal and mean values of the electron autodetachment lifetimes. The relative energies of the rovibrational levels allow the description of the spontaneous electron emission process, while the description of the rotational dissociation is treated with the quantum dynamics method as well as time-independent methods. The results of our calculations are verified by comparison with the experimental data.

Mechanistic insights into rhodium-catalyzed enantioselective allylic alkylation for quaternary stereogenic centers

Installing quaternary stereogenic carbon is an arduous task of contemporary importance in the domain of asymmetric catalysis. To this end, an asymmetric allylic alkylation of α,α-disubstituted aldehydes by using allyl benzoate in the presence of Wilkinson's catalyst [Rh(Cl)(PPh₃)₃], (R)-BINOL–P(OMe) as the external ligand, and LiHMDS as the base has been reported to offer high enantioselectivity. The mechanistic details of this important reaction remain vague, which prompted us to undertake a detailed density functional theory (SMD_(THF)/B3LYP-D3) investigation on the nature of the potential active catalyst, energetic features of the catalytic cycle, and the origin of high enantioselectivity. We note that a chloride displacement from the native Rh-phosphine [Rh(Cl)(PPh₃)₃] by BINOL–P(OMe) phosphite and an ensuing MeCl elimination can result in the in situ formation of a Rh-phosphonate [Rh(BINOL–P Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O)(PPh₃)₃]. A superior energetic span (δE) noted with such a Rh-phosphonate suggests that it is likely to serve as an active catalyst. The uptake of allyl benzoate by the active catalyst followed by the turnover determining C–O bond oxidative addition furnishes a Rh-π-allyl intermediate, which upon interception by (Z)-Li-enolate (derived from α,α-disubstituted aldehyde) in the enantiocontrolling C–C bond generates a quaternary stereogenic center. The addition of the re prochiral face of the (Z)-Li-enolate to the Rh-bound allyl moiety leading to the R enantiomer of the product is found to be 2.4 kcal mol⁻¹ more preferred over the addition through its si face. The origin of the stereochemical preference for the re face addition is traced to improved noncovalent interactions (NCIs) and less distortion in the enantiocontrolling C–C bond formation transition state than that in the si face addition. Computed enantioselectivity (96%) is in very good agreement with the experimental value (92%), so is the overall activation barrier (δE of 17.1 kcal mol⁻¹), which is in conformity with room temperature reaction conditions.

The origin of high enantioselectivity in the formation of quaternary stereogenic carbon.

KID Procedure Applied on the [(PY5Me2)MoO]+ Complex

The KID (Koopmans in DFT) protocol usually applies in organic molecules of the closed-shell type. We used the KID procedure on an open-shell Mo-based system for the first time to choose the most suitable density functional to compute global and local reactivity descriptors obtained from the conceptual density-functional theory (DFT). From a set of 18 density functionals, spread from the second until the fourth rung of Jacob's ladder: BLYP, BP86, B97-D, MN12-L, MN15-L, M06-L, M11-L, CAM-B3LYP, PBE0, B3LYP, N12-SX, M06-2X, MN15, MN12-SX, ωB97X-D, M11, LC-ωHPBE, and APFD, we concluded that CAM-B3LYP provides the best outcome, and in the second place, M06-2X. Because the vertical first ionization potential and vertical first electron affinity in the ground state (gs) are defined as follows I = E _gs(N - 1) - E _gs(N) and A = E _gs(N) - E _gs(N + 1), where E _gs(N - 1), E _gs(N), and E _gs(N + 1) correspond to energies of the system bearing N, N + 1, and N - 1 electrons, along with Koopmans' theorem (KT) given by I ≈ -ε_HOMO (ε_HOMO, highest occupied molecular orbital energy) and A ≈ -ε_LUMO (ε_LUMO, lowest unoccupied molecular orbital energy), the deviation from the KT was performed by the use of the index, such that J _I = |E _gs(N - 1) - E _gs(N) + ε_HOMO| and J _A = |E _gs(N) - E _gs(N + 1) + ε_LUMO|, which are absolute deviations from the perspective of I and A, respectively. Furthermore, the ε_SOMO (SOMO: singly-occupied molecular orbital energy) leads us to another index given by |ΔSL| = |ε_SOMO - ε_LUMO|. Therefore, J _HL and |ΔSL| are indexes defined to evaluate the quality of the KT when employed within the context of quantum chemical calculations based on DFT and not the Hartree-Fock theory. We propose the index that could be more suitable to choose the most proper density functional because the J _HL and |ΔSL| are independent indexes.

Re-Silane complexes as frustrated lewis pairs for catalytic hydrosilylation

A pathway for the catalytic hydrosilylation of carbonyl substrates with M(C6F5)3 (M = B, Al and Ga) was calculated by DFT (B3PW91-D3) and it was shown that in the case of the Al reagent, the carbonyl substrate binds irreversibly and inhibits catalysis by generating a stable carbonyl adduct. In contrast, the reduced electrophilicity of B(C6F5)3 disfavors the binding of the carbonyl substrate and increases the concentration of an activated silane adduct which is the species responsible for catalytic turnover. A similar mechanism was found for both cationic and neutral Re(iii) species. Further, it was shown by tuning the electrophilicity of the rhenium catalysts, conditions can be found that would enable the catalytic hydrosilylation of ketone and nitrile substrates that were unreactive in previously reported systems. Thus the mechanisms proposed in this work, lay the foundation for the design of new catalytic systems.

Understanding the mechanism and reactivity of Pd-catalyzed C-P bond metathesis of aryl phosphines: a computational study

Transition metal-catalyzed single bond metathesis has recently emerged as a useful strategy for functional group transfer. In this work, we explored the mechanism and reactivity profile of Pd/PhI-cocatalyzed C-P bond metathesis between aryl phosphines using density functional theory (DFT) calculations. The overall single bond metathesis involves two Pd(ii)-catalyzed C-P reductive eliminations and two Pd(0)-catalyzed C-P oxidative additions, which allows the reversible C-P bond cleavage and formation of the phosphonium cation. Distortion/interaction analysis indicates that the facile C-P bond cleavage and formation of the phosphonium cation are due to the involvement of coordinating aryl phosphine in the process. In addition, the substituent effects on the reaction kinetics and thermodynamics of metathesis were computed, which provides helpful mechanistic information for the design of related single bond metathesis reactions.

Synthesis and Luminescence of Optical Memory Active Tetramethylammonium Cyanocuprate(I) 3D Networks

The structures of three tetramethylammonium cyanocuprate(I) 3D networks [NMe₄]₂[Cu(CN)₂]₂•0.25H₂O (1), [NMe₄][Cu₃(CN)₄] (2), and [NMe₄][Cu₂(CN)₃] (3), (Me₄N = tetramethylammonium), and the photophysics of 1 and 2 are reported. These complexes are prepared by combining aqueous solutions of the simple salts tetramethylammonium chloride and potassium dicyanocuprate. Single-crystal X-ray diffraction analysis of complex 1 reveals {Cu₂(CN)₂(μ₂-CN)₄} rhomboids crosslinked by cyano ligands and D_3h {Cu(CN)₃} metal clusters into a 3D coordination polymer, while 2 features independent 2D layers of fused hexagonal {Cu₈(CN)₈} rings where two Cu(I) centers reside in a linear C_∞v coordination sphere. Metallophilic interactions are observed in 1 as close Cu⋯Cu distances, but are noticeably absent in 2. Complex 3 is a simple honeycomb sheet composed of trigonal planar Cu(I) centers with no Cu^…Cu interactions. Temperature and time-dependent luminescence of 1 and 2 have been performed between 298 K and 78 K and demonstrate that 1 is a dual singlet/triplet emitter at low temperatures while 2 is a triplet-only emitter. DFT and TD-DFT calculations were used to help interpret the experimental findings. Optical memory experiments show that 1 and 2 are both optical memory active. These complexes undergo a reduction of emission intensity upon laser irradiation at 255 nm although this loss is much faster in 2. The loss of emission intensity is reversible in both cases by applying heat to the sample. We propose a light-induced electron transfer mechanism for the optical memory behavior observed.

Scrutinizing the substituent effect on Mo-based electrocatalysts for molecular hydrogen release through axial–equatorial decomposition: a DFT study

The effect of electron-donating and -withdrawing groups is studied in terms of axial and equatorial locations at the p-pyridine rings in the [(PY₅Me₂)MoO]²⁺ for the H₂ release in aqueous media. It opens a way to modify its kinetics and thermodynamics.

How does binuclear zinc amidohydrolase FwdA work in the initial step of methanogenesis: From formate to formyl-methanofuran

The initial step of methanogenesis is the fixation of CO₂ to formyl-methanofuran (formyl-MFR) catalyzed by formyl-MFR dehydrogenase, which can be divided into two half reactions. Herein, the second half reaction catalyzed by FwdA (formyl-methanofuran dehydrogenase subunit A), i.e., from formate to formyl-methanofuran, has been investigated using density functional theory and a chemical model based on the X-ray crystal structure. The calculations indicate that, compared with other well-known di-zinc hydrolases, the FwdA reaction employs a reverse mechanism, including the nucleophilic attack of MFR amine on formate carbon leading to a tetrahedral gem-diolate intermediate, two steps of proton transfer from amine to formate moieties assisted by the Asp385, and the CO bond dissociation to form the formyl-MFR product. The second step of proton transfer from the amine moiety to the Asp385 is rate-limiting with an overall barrier of 21.2 kcal/mol. The two zinc ions play an important role in stabilizing the transition states and intermediates, in particular the negative charge at the formate moiety originated from the nucleophilic attack of the MFR amine. The work here appends a crucial piece in the methanogenic mechanistics and advances the understanding of the global carbon cycle.

Copper-mediated reduction of azides under seemingly oxidising conditions: catalytic and computational studies

The reduction of aryl azides in the presence of water and air and without an obvious reducing agent is reported.

A 3D visualization of the substituent effect : A brief analysis of two components of the operational formula of dual descriptor for open-shell systems

Six organometallic compounds coming from a basic Mo-based complex were analyzed from the perspective of the dual descriptor in order to detect subtle influences that a substituent group could exert on the reactive core at a long range. Since the aforementioned complexes are open-shell systems, the used operational formula for the dual descriptor is that one defined for those aforementioned systems, which was then compared with spin density. In addition, dual descriptor was decomposed into two terms, each of which was also applied on every molecular system. The obtained results indicated that components of dual descriptor could become more useful than the operational formula of dual descriptor because differences exerted by the substituents at the para position were better detected by components of dual descriptor rather than the dual descriptor by itself.

Design of an enantioselective artificial metallo-hydratase enzyme containing an unnatural metal-binding amino acid

The design of artificial metalloenzymes is a challenging, yet ultimately highly rewarding objective because of the potential for accessing new-to-nature reactions. One of the main challenges is identifying catalytically active substrate-metal cofactor-host geometries. The advent of expanded genetic code methods for the in vivo incorporation of non-canonical metal-binding amino acids into proteins allow to address an important aspect of this challenge: the creation of a stable, well-defined metal-binding site. Here, we report a designed artificial metallohydratase, based on the transcriptional repressor lactococcal multidrug resistance regulator (LmrR), in which the non-canonical amino acid (2,2'-bipyridin-5yl)alanine is used to bind the catalytic Cu(ii) ion. Starting from a set of empirical pre-conditions, a combination of cluster model calculations (QM), protein-ligand docking and molecular dynamics simulations was used to propose metallohydratase variants, that were experimentally verified. The agreement observed between the computationally predicted and experimentally observed catalysis results demonstrates the power of the artificial metalloenzyme design approach presented here.

A phosphomide based PNP ligand, 2,6-{Ph2PC(O)}2(C5H3N), showing PP, PNP and PNO coordination modes

Coordination chemistry of a versatile phosphomide ligand, 2,6-{Ph₂PC(O)}₂(C₅H₃N), is described.

Computational Studies on the Pt(II)-Catalyzed Cycloisomerization of 1,6-dienes into Bicyclopropanes: A Mechanistic Quandary Evaluated by DFT

The mechanism of the (bis(phosphanylethyl)phosphane)Pt(2+) catalyzed cyclo-isomerization reaction of 7-methyl-octa-1,6-diene to form 1-isopropylbicyclo[3.1.0]hexane was studied using computational methods. The cyclopropanation step was found to be the turnover-limiting step. The overall reaction proceeds via both a 5-exo and a 6-endo route. W conformations were shown to facilitate cyclopropanation, but do not have any influence on the rate of the 1,2-hydride shifts.