Glycine phases formed from frozen aqueous solutions: Revisited

Developments in Raman Spectromicroscopy for Strengthening Materials and Natural Science Research: Shaping the Future of Physical Chemistry

Spectroscopic techniques, especially Raman spectroscopy, cover a large subset in the teaching and research domain of physical chemistry. Raman spectroscopy, and other Raman based techniques, establishes itself as a powerful analytical tool with diverse applications across scientific, industrial, and natural science (including biology and pharmacy) fields and helps in the progress of physical chemistry. Recent advancements and future prospects in Raman spectroscopy, focusing on key areas of innovation and potential directions for research and development, have been highlighted here along with some of the challenges that need to be addressed to prepare Raman based techniques for the future. Significant progress has been made in enhancing the sensitivity, spatial resolution, and time resolution of Raman spectroscopy techniques. Raman spectroscopy has applications in all areas of research but especially in biomedical applications, where Raman spectroscopy holds a great promise for noninvasive or minimally invasive diagnosis, tissue imaging, and drug monitoring. Improvements in instrumentation and laser technologies have enabled researchers to achieve higher sensitivity levels, investigate smaller sample areas with improved spatial resolution, and capture dynamic processes with high temporal resolution. These advancements have paved the way for a deeper understanding of molecular structure, chemical composition, and dynamic behavior in various materials and biological systems. It is high time that we consider whether Raman based techniques are ready to be improved based on the strength of the current era of AI/ML and quantum technology.

In situ optical spectroscopy of crystallization: One crystal nucleation at a time

While crystallization is a ubiquitous and an important process, the microscopic picture of crystal nucleation is yet to be established. Recent studies suggest that the nucleation process can be more complex than the view offered by the classical nucleation theory. Here, we implement single crystal nucleation spectroscopy (SCNS) by combining Raman microspectroscopy and optical trapping induced crystallization to spectroscopically investigate one crystal nucleation at a time. Raman spectral evolution during a single glycine crystal nucleation from water, measured by SCNS and analyzed by a nonsupervised spectral decomposition technique, uncovered the Raman spectrum of prenucleation aggregates and their critical role as an intermediate species in the dynamics. The agreement between the spectral feature of prenucleation aggregates and our simulation suggests that their structural order emerges through the dynamic formation of linear hydrogen-bonded networks. The present work provides a strong impetus for accelerating the investigation of crystal nucleation by optical spectroscopy.

A Metastable Amorphous Intermediate Is Responsible for Laser-Induced Nucleation of Glycine

Laser-induced crystal nucleation through optical tweezing, and in particular polymorph selection through laser polarization, promises unprecedented control over crystallization. However, in the absence of a nearby liquid-liquid critical point or miscibility gap, the origin of the required mesoscale clusters remains unclear. A number of recent studies of so-called nonclassical nucleation have suggested the presence of large amorphous clusters. Here, we show that supersaturated aqueous glycine solutions form metastable intermediate particles that are off the direct path to crystal nucleation. Laser-induced crystal nucleation only occurs when the laser "activates" one of these particles. In situ low-frequency Raman spectroscopy is used to demonstrate their amorphous or partially ordered character and transformation to various crystal polymorphs. The requirement for solution aging in many previously reported laser-induced crystal nucleation experiments strongly suggests that the presence of amorphous intermediates is a general requirement.

Glycine amino acid transformation under impacts by small solar system bodies, simulated via high-pressure torsion method

Impacts by small solar system bodies (meteoroids, asteroids, comets and transitional objects) are characterized by a combination of energy dynamics and chemical modification on both terrestrial and small solar system bodies. In this context, the discovery of glycine amino acid in meteorites and comets has led to a hypothesis that impacts by astronomical bodies could contribute to delivery and polymerization of amino acids in the early Earth to generate proteins as essential molecules for life. Besides the possibility of abiotic polymerization of glycine, its decomposition by impacts could generate reactive groups to form other essential organic biomolecules. In this study, the high-pressure torsion (HPT) method, as a new platform for simulation of impacts by small solar system bodies, was applied to glycine. In comparison with high-pressure shock experiments, the HPT method simultaneously introduces high pressure and deformation strain. It was found that glycine was not polymerized in the experimental condition assayed, but partially decomposed to ethanol under pressures of 1 and 6 GPa and shear strains of < 120 m/m. The detection of ethanol implies the inherent availability of remaining nitrogen-containing groups, which can incorporate to the formation of other organic molecules at the impact site. In addition, this finding highlights a possibility of the origin of ethanol previously detected in comets.

Laboratory exploration of mineral precipitates from Europa's subsurface ocean

The precipitation of hydrated phases from a chondrite-like Na-Mg-Ca-SO4-Cl solution is studied using in situ synchrotron X-ray powder diffraction, under rapid- (360 K h-1, T = 250-80 K, t = 3 h) and ultra-slow-freezing (0.3 K day-1, T = 273-245 K, t = 242 days) conditions. The precipitation sequence under slow cooling initially follows the predictions of equilibrium thermodynamics models. However, after ∼50 days at 245 K, the formation of the highly hydrated sulfate phase Na2Mg(SO4)2·16H2O, a relatively recent discovery in the Na2Mg(SO4)2-H2O system, was observed. Rapid freezing, on the other hand, produced an assemblage of multiple phases which formed within a very short timescale (≤4 min, ΔT = 2 K) and, although remaining present throughout, varied in their relative proportions with decreasing temperature. Mirabilite and meridianiite were the major phases, with pentahydrite, epsomite, hydrohalite, gypsum, blödite, konyaite and loweite also observed. Na2Mg(SO4)2·16H2O was again found to be present and increased in proportion relative to other phases as the temperature decreased. The results are discussed in relation to possible implications for life on Europa and application to other icy ocean worlds.

Conundrum of γ glycine nucleation revisited: to stir or not to stir?

Stirring promotes formation of the metastable α glycine polymorph, whereas stable γ glycine forms under quiescent conditions.

Large porous particles for respiratory drug delivery. Glycine-based formulations

Large porous particles are becoming increasingly popular as carriers for pulmonary drug delivery with both local and systemic applications. These particles have high geometric diameters (5-30μm) but low bulk density (~0.1g/cm³ or less) such that the aerodynamic diameter remains low (1-5μm). In this study salbutamol and budesonide serve as model inhalable drugs with poor water solubility. A novel method is proposed for the production of dry powder inhaler formulations with enhanced aerosol performance (e.g. for salbutamol-glycine formulation the fine particle fraction (FPF≤4.7μm) value is 67.0±1.3%) from substances that are poorly soluble in water. To overcome the problems related to extremely poor aqueous solubility of the APIs, not individual solvents are used for spray freeze-drying of API solutions, but organic-water mixtures, which can form clathrate hydrates at low temperatures and release APIs or their complexes as fine powders, which form large porous particles after the clathrates are removed by sublimation. Zwitterionic glycine has been used as an additive to API directly in solutions prior to spray freeze-drying, in order to prevent aggregation of powders, to enhance their dispersibility and improve air-flow properties. The clathrate-forming spray freeze-drying process in the multi-component system was optimized using low-temperature powder X-ray diffraction and thermal analysis.

Advances in elucidating mechanochemical complexities via implementation of a simple organic system

Mechanochemistry is becoming increasingly popular amongst both the academic and industrial communities as an alternative method for inducing physical and chemical reactions. Despite its rapidly expanding application, little is understood of its mechanisms, greatly limiting its capacity. In the present work the application of specialty devices allowed submission of the simple organic system, α-glycine + β-malonic acid, to isolated shearing and impact treatment. In doing so, unique products were observed to result from each of these major mechanical actions; shear inducing formation of the known salt, glycinium semi-malonate (GSM), and impact yielding formation of a novel phase. Correlation of these isolated treatments with a more common ball mill indicated two unique regions within the milling jar, each characterised by varying ratios of shear and impact, leading to different products being observed. It is widely accepted that, particularly when considering organic systems, mechanical treatment often acts by inducing increases in local temperature, leading to volatilisation or melting. A combination of DSC and TGA were used to investigate the role of temperature on the system in question. Invariably, heating induced formation of GSM, with evidence supporting a eutectic melt, rather than a gas-phase reaction. Shear heating alone is unable to describe formation of the novel phase obtained through impact treatment. By considering the formation and character of mechanically produced tablets, a model is described that may account for formation of this novel phase. This system and methodology for mechanochemical study offers intriguing opportunities for continued study of this widely used and exciting field.

Bis(paracetamol) pyridine – a new elusive paracetamol solvate: from modeling the phase diagram to successful single-crystal growth and structure–property relations

In addition to the synthon approach, it is equally important to consider phase diagrams when searching for practical methods of crystallising multi-component crystals, either as single crystals or as powders.