A reconstructive polyamorphous transition in borosilicate glass induced by irreversible compaction

Vibrational disorder and densification-induced homogenization of local elasticity in silicate glasses

We report the effect of structural compaction on the statistics of elastic disorder in a silicate glass, using heterogeneous elasticity theory with the coherent potential approximation (HET-CPA) and a log-normal distribution of the spatial fluctuations of the shear modulus. The object of our study, a soda lime magnesia silicate glass, is compacted by hot-compression up to 2 GPa (corresponding to a permanent densification of ~ 5%). Using THz vibrational spectroscopic data and bulk mechanical properties as inputs, HET-CPA evaluates the degree of disorder in terms of the length-scale of elastic fluctuations and the non-affine part of the shear modulus. Permanent densification decreases the extent of non-affine elasticity, resulting in a more homogeneous distribution of strain energy, while also decreasing the correlation length of elastic heterogeneity. Complementary 29Si magic angle spinning NMR spectroscopic data provide a short-range rationale for the effect of compression on glass structure in terms of a narrowing of the Si-O-Si bond-angle and the Si-Si distance.

Smart-Responsive Colloidal Capsules as an Emerging Tool to Design a Multifunctional Lubricant Additive

The microencapsulation technique has been proven as a powerful and flexible tool to design and develop a multifunctional additive for various applications. The significant characteristics of this technique center around the ability to control the release of the core active ingredients by tuning the porosity and the permeability of the shell. However, this original concept has faced a major roadblock in lubricant research since it causes a major breakage of the microcapsules (∼70%) under severe stressed-shearing conditions. The shell fragments generated from such unwanted events significantly influence the friction and wear performances of the counterpart, thus limiting the ongoing research of the microencapsulation technique in tribology. To solve such technical bottlenecks, we develop a new strategy of utilizing the microencapsulation technique which focuses on the smart responsiveness of the shell with the base lubricant and the synergy between the incorporated materials. In this study, the smart-responsive colloidal capsule has been developed based on our proposed concept that demonstrates outstanding performances in improving the lubricity of the conventional melt lubricant (by ∼70%) under hot metal working conditions. An unprecedented oxidation-reduction (by ∼93%) and the first instance of ultralow friction (0.07) at elevated temperatures (880 °C) have been initially achieved. This work opens a new avenue of customizing a multifunctional additive package by utilizing the smart colloidal capsules in lubrication science.

The HXD95: a modified Bassett-type hydrothermal diamond-anvil cell for in situ XRD experiments up to 5 GPa and 1300 K

A new diamond-anvil cell apparatus for in situ synchrotron X-ray diffraction measurements of liquids and glasses, at pressures from ambient to 5 GPa and temperatures from ambient to 1300 K, is reported. This portable setup enables in situ monitoring of the melting of complex compounds and the determination of the structure and properties of melts under moderately high pressure and high temperature conditions relevant to industrial processes and magmatic processes in the Earth's crust and shallow mantle. The device was constructed according to a modified Bassett-type hydrothermal diamond-anvil cell design with a large angular opening (θ = 95°). This paper reports the successful application of this device to record in situ synchrotron X-ray diffraction of liquid Ga and synthetic PbSiO3 glass to 1100 K and 3 GPa.

Response of complex networks to compression: Ca, La, and Y aluminoborosilicate glasses formed from liquids at 1 to 3 GPa pressures

Aluminoborosilicate glasses containing relatively high field strength modifiers (Ca, La, and Y) have been compressed at pressures up to 3 GPa and near the glass transition temperature (Tg) and quenched to room temperature at high pressure followed by decompression. Structural changes were quantified with high-resolution (27)Al and (11)B MAS nuclear magnetic resonance at 14.1-18.8 T. The changes with pressure in Al and B coordinations in the recovered samples are quite large with more than 50% decreases in tetrahedral aluminum ((IV)Al) and 200%-300% increases in tetrahedral boron ((IV)B). Glasses with higher field strength modifiers (La and Y) contain more high coordinated aluminum ((V,V I)Al) at all pressures studied. More high coordinated boron also correlates with higher field strength modifier if all three compositions are compared on an isothermal basis. Although lowering fictive temperature and increasing pressure both increase Al and B coordinations, our study shows that the actual mechanisms for structural changes are most probably different for temperature and pressure effects. Using a rough thermodynamic model to extrapolate to higher pressures, it appears that a simple non-bridging oxygen (NBO) consumption mechanism is not sufficient to convert all the aluminum to octahedral and boron to tetrahedral coordination, suggesting other mechanisms for structural changes could occur at high pressure as NBO becomes depleted.

Impact of pressure on plastic yield in amorphous solids with open structure

Plasticity in amorphous silica is unusual: The yield stress decreases with hydrostatic pressure, in contrast to the Mohr-Coulomb response commonly found in more compact materials such as bulk metallic glasses. To better understand this response, we have carried out molecular dynamics simulations of plastic response in a model glass with open structure. The simulations reproduce the anomalous dependence of yield stress with pressure and also correctly predict that the plastic response turns to normal once the material has been fully compacted. We also show that the overall shape of the yield surface is consistent with a quadratic behavior predicted assuming local buckling of the structure, a point of view that fits well into the present understanding of the deformation mechanisms of amorphous silica. The results also confirm that free volume is an adequate internal variable for a continuum scale description of the plastic response of amorphous silica. Finally, we also investigate the long-range correlations between rearrangement events. We find that strong intermittency is observed when the structure remains open, while compaction results in more homogeneous rearrangements. These findings are in agreement with recent results on the effect of compression on the middle range order in silicate glasses and also suggest that the well-known volume recovery of densified silica at relatively low temperatures is in fact a form of aging.

Structural investigation of calcium borosilicate glasses with varying Si/Ca ratios by infrared and Raman spectroscopy

Si/Ca ratio-dependent structure of borosilicate.

Elastic moduli of permanently densified silica glasses

Modelling the mechanical response of silica glass is still challenging, due to the lack of knowledge concerning the elastic properties of intermediate states of densification. An extensive Brillouin Light Scattering study on permanently densified silica glasses after cold compression in diamond anvil cell has been carried out, in order to deduce the elastic properties of such glasses and to provide new insights concerning the densification process. From sound velocity measurements, we derive phenomenological laws linking the elastic moduli of silica glass as a function of its densification ratio. The found elastic moduli are in excellent agreement with the sparse data extracted from literature, and we show that they do not depend on the thermodynamic path taken during densification (room temperature or heating). We also demonstrate that the longitudinal sound velocity exhibits an anomalous behavior, displaying a minimum for a densification ratio of 5%, and highlight the fact that this anomaly has to be distinguished from the compressibility anomaly of a-SiO₂ in the elastic domain.

Deformation mechanisms during nanoindentation of sodium borosilicate glasses of nuclear interest

In this paper we analyze results of Molecular Dynamics simulations of Vickers nanoindentation, performed for sodium borosilicate glasses of interest in the nuclear industry. Three glasses have been studied in their pristine form, as well as a disordered one that is analogous to the real irradiated glass. We focused in the behavior of the glass during the nanoindentation in order to reveal the mechanisms of deformation and how they are affected by microstructural characteristics. Results have shown a strong dependence on the SiO2 content of the glass, which promotes densification due to the open structure of SiO4 tetrahedra and also due to the strength of Si-O bonds. Densification for the glasses is primarily expressed by the relative decrease of the Si-O-Si and Si-O-B angles, indicating rotation of the structural units and decrease of free volume. The increase of alkali content on the other hand results to higher plasticity of the matrix and increased shear flow. The most important effect on the deformation mechanism of the disordered glasses is that of the highly depolymerized network that will also induce shear flow and, in combination with the increased free volume, will result in the decreased hardness of these glasses, as has been previously observed.